Download Lian Li PC-V2010B computer case
Transcript
Support liquid cooling system Side panel lock 3-speed fan controller Slot bracket 14cm fan module Power fix bracket Loosen the screws to remove dust-free cover for water tube openings. Brake for wheels Metal casters Side panels installation 2 2 1 1 Loose the screw and pull the latch to release the side panel. Remove the side panel. Chip set cooler installation Adding a lock to secure the hardware. Rubber protectors for aluminum wheels. Removable air filter Push to release Removable fan filter Removable air filter Loosing the two thumb screws on the fan module to release. 1. Fasten the HDD screws with anti-vibration rubber rings to the HDD. 2. Slide the HDD into the HDD cage with the anti-vibration kit. 3. Press down the HDD into the slots to secure. Note: Adding extra screw to the HDD cage for extra security. Hardware list Buzzer(1) Extension cable 12V(1) for power supply to M/B Power supply holder kit(2) PCI card holder-S(3) PCI card holder-L(4) Thumb screw(7) for PCI card holder (70 Stand off bolt(16) Thumb screw(34) & rubber ring(34) for fix HDD for SSI CEB/EEB for stand off Rubber protectors(4) for wheels 1 for stand off bolt Thumb screw(8) for HDD extra fixing (8) Chip set cooler(1)+ themb screw(2) to mount on PCI card holder 2 for cable management For user who wants to use single power supply unit, and using the space next to it for other purpose. Box(1) for spare parts Mounting plate for dual PSUs, Recommended to use the power supply with 80mm exhaust fan. C50.V2010.02E-1 3-speed fan adjustable device 3 1 3 L for SSI CEB/EEB 2 M Release brake 1 H The oval hole on M/B tray designed for special server boards, please use the nut to hold the copper bolt in place. 2 Loosing two thumb screws to release the M/B tray. Secure the stand off bolts on the M/B tray which match with the M/B fix points, place the M/B on the copper bolt, fasten the screws to secure. PSU tray installation Mounting plate for dual PSUs, Recommended to use the power supply with 80mm exhaust fan. Extension cable for 12V PSU to M/B For user who wants to use single power supply unit, and using the space next to it for other purpose. Loosing two screws on the case bottom to release long power supply support bracket. Fasten the screws on the case bottom to secure the power bracket. VGA Card Pillar Installation Guide 1 2 3 4 C50.V2010.02E-2 9 7 Black(GND) 5 Green 3 White 1 Red KEY10 Black(GND) 8 Green 6 White 4 Red 2 9 7 Black(GND) 5 Green 3 White 1 Red 2 Red(MIC) 4 Brown(MIC-PWE) 6 Yellow(R-OUT) 8 10 Blue(L-OUT) EAR MIC USB KEY 10 Black(GND) 8 Green 6 White 4 Red 2 1 3 5 7 9 USB USB 9 Green(SENSE2 RETUR) 7 KEY 5 Orange(SENSE1 RETUR) 3 Black(PRESENCE) 1 Black(GND) HD AUDIO AC'97 Blue(PORT2 L) 10 Black(SENSE SEND) 8 Yellow(PORT2 R) 6 Brown(PORT1 R) 4 Red(PORT1 L) 2 Black(AGND) NC Yellow(R-RET) KEY Blue(L-RET) USB Black(KEY) 10 White(+12V) 8 Green(TPB+) 6 Black(VG) 4 Blue(TPA+) 2 9 7 5 3 1 Black(GND) White(+12V) Red(TPB-) Black(VG) Orange(TPA-) 1394 IEEE1394 E-SATA Connector SATA Cable C50.V2010.02E-3