Download CDA WF140WH dishwasher

WF140 Freestanding Dishwasher
Manual for Installation, Use and Maintenance
Passionate about style
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu
Important
The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this
product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect
installation or misuse of the appliance.
This appliance is not designed to be used by people (including children) with reduced physical, sensorial or mental
capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions on how to use
the appliance by someone who is responsible for their safety.
Under no circumstances should any external covers be removed for servicing or maintenance except by suitably
qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a
fault with your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
This appliance has been designed for domestic use only. Commercial use will invalidate the warranty.
CE Declarations of Conformity:
This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directives
89/336/EC, 2006/95/EC, IEC436/DIN44990, EN 50242
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer
providing appliance recycling services.
Disposing
avoids
possible
negative
consequences
for the
Disposing of
of aahousehold
householdappliance
applianceseparately
separately
avoids
possible
negative
consequences
for environment
the environment and health
and health.
It also
enables thedisposal
constituent
materialsthe
to constituent
be recovered,
saving both
and resources.
a
deriving
from
inappropriate
and enables
materials
to beenergy
recovered
to obtain As
significant
savings
reminder
need to dispose
of household
appliances
separately,
the product
is marked
with a crossed-out
in energy of
andthe
resources.
As a reminder
of the need
to dispose
of household
appliances
separately,
the product is marked
with a crossed-out
wheeled
dustbin. wheeled dustbin.
Important
•
•
•
•
•
•
•
Read the instructions prior to installation and use of the appliance.
Do not lean or climb on the open dishwasher door to prevent damage.
Close the dishwasher door after use to prevent accidents.
Use only detergents, salt and rinse aid specifically designed for dishwashers.
Do not put solvents in the dishwasher detergent compartment to prevent risk of explosion
Only put dishwasher safe items into the dishwasher. If in doubt, check with the manufacturer of the items.
Take care when loading the dishwasher to observe the recommendations for best loading practice, and also to ensure
that sharp objects such as knives are placed blade down to prevent accidents.
• Do not open the dishwasher door when a programme is running. If it is necessary to do so, then open it
only slightly to allow the dishwasher to pause the programme and prevent any water spilling out. Remember that the
water in the dishwasher can be very hot when the programme is running.
• When the dishwasher is not in use, we reccomend that you turn off the water supply at the supply tap and disconnect
the main supply.
• If you are leaving the dishwasher for an extended period you should leave the door slightly open to prevent the
formation of unpleasant smells.
Recomendations
• To reduce energy and water consumption, remove all dirt residues from the dishes prior to loading the dishw•
• Only run the dishwasher only when fully loaded.
• Place hollow items (bowls, glasses and pans) face down in the basket.
Before first use
• Set the water softener level as required by the water hardness in the area.
• Add 2kg of salt into the salt compartment and then fill with water to the top of the salt compartment.
• Remove all the packaging materials from the interior of the dishwasher.
• Fill the rinse aid compartment.
• Run a hot programme without any dishes in the dishwasher.
Control Panel
Power Button
To switch the power to the dishwasher on or off, press the power button (1). When you
6 switch on the
7 dishwasher, the end
of programme light will illumnate.
Programme Selection Button
To select a programme, press the programme selection button (2). The dishwasher will store in its memory the last
programme used. To change the programme, press the programme selection button again until the light next to the
required programme is illuminated.
Delay Timer Button and Delay Timer Indicator Lights
The dishwasher is equipped with a variable delay timer of three, six or nine hours’ duration. To set the delay timer, press the
1 (3). This will switch on the delay timer for three hours, and the 3h3 light
4 will5 illuminate.
8
2
delay timer button
To change
the
duration, press the delay timer button again until the light next to the required time (6h or 9h) is illuminated.
1 - Power button
To cancel the timer, press the delay timer button again until none of the delay timer indicator lights are illuminated.
2 - Programme Selection dial
3 - Delay Timer button
As the delay timer counts down, the delay timer indicator lights will illuminate in turn, so at six hours’ delay the 6h light will
4 Prewashand
button
illuminate,
at three hours’ delay the 3h light will illuminate.
5- Start/Pause button
6
- Delay
Timer/Progress
indicator lights
Salt
Warning
Light
7
Rinse
Aid
warning
light
When the dishwasher salt begins to run out, the salt warning light will illuminate to advise that the salt needs refilling.
8 - Salt warning light
Rinse Aid Warning Light
When the rinse aid begins to run out, the rinse aid warning light will illuminate to advise that the salt needs refilling.
End of Programme Light
When the programme is complete, the dishwasher will emit five beeps and the end of programme light will illuminate.
2
Power button
1
3
Programme selection button
Delay timer button
Indicator lights
Control Panel
Starting a programme
• Press the Power button (1) to switch the dishwasher on.
• Turn the Programme Selection Dial (2) until the required programme is indicated.
• If required, press the Delay Timer button (3) repeatedly to set the programme.
• If required, press the Prewash button (4).
• Ensure the dishwasher door is closed.
• Press the Start/Pause button (5) to begin the programme.
If possible, do not open the dishwasher door once the programme has started.
Using the delay timer
The dishwasher is equipped with a variable delay timer of three, six, nine or twelve hours’ duration.
• To set the delay timer, press the Delay Timer button (3). This will switch on the delay timer for three hours, and the 3h light will illuminate.
• To change the duration, press the delay timer button again until the light next to the required time (6h, 9h or 12h) is illuminated.
• To cancel the timer, press the delay timer button again until none of the delay timer indicator lights are illuminated.
As the delay timer counts down, the delay timer indicator lights (6) will illuminate in turn, for example at six hours’ delay the
6h light will illuminate, and at three hours’ delay the 3h light will illuminate.
Using the prewash function
The dishwasher is equipped with a prewash function to rinse off residues prior to a full programme.
• To run a prewash programme on its own, first press the Power button, then press the Prewash button and then press the Start/Pause button.
• To run the extra-intensive programme, first press the Power button, then press the Prewash button, select the intensive programme with the Programme Selection dial and then press the Start/Pause button.
Progress indicator lights
The progress indicator lights (6) illuminate in turn to show the progress of the programme. The light for end of programme
will remain illuminated until the power is switched off.
Changing a programme in progress
• Press the Start/Pause button.
• Once the programme has stopped, turn the Programme Selection Dial to the required programme and press the Start/Pause button again.
Cancelling a programme in progress
• Press the Start/Pause button.
• Turn the Programme Selection dial to 0, then press the Start/Pause button again. The dishwasher will drain for approximately thirty seconds, and the end progress indicator light will illuminate once the programme is cancelled.
Switching the dishwasher off
• Once the end progress indicator light illuminates, the dishwasher can be switched off by pressing the Power button.
• Then turn off the water tap and remove the plug from the power socket.
Please note: The dishwasher will automatically continue on the programme it has started if the door is
opened or in the event of a power cut.
1. Push the latch as shown in figure 1.
2. Add the required amount of detergent. The main detergent
compartment “b” (figure 2) has lines to allow for specific amounts of
detergent. These are marked at either 15 cm3 or 25 cm3, to be
used depending on how dirty the dishes are.
If your dishes are in need of an intensive wash, then add 5 cm3 of
detergent into the prewash section of the compartment “a” (figure 2).
3. Then close the detergent compartment lid until the latch locks.
fig 1
Detergent
Detergent
Please note: You should only use detergents designed specifically for
To in
filldishwashers.
the detergent compartment
use
To fill the detergent compartment
1. Push the latch as shown in figure 1.
1. Push the latch to open the compartment.
Add
the required amount
of detergent.
The main
detergent do not put
If2.using
dishwasher
always
use the detergent
compartment,
2.
Add
the requiredtablets,
amount
of2)
detergent.
The
mainfor
detergent
compartment
compartment
“b”
(figure
has linesorto
allow
specific
amounts
of them
in
the
main
body
of
the
dishwasher
in
the
cutlery
basket.
The solubility
(bdetergent.
in figure 1)These
has lines
allow for
specific15amounts
of detergent.
areto
marked
at either
cm3 or 25
cm3, to be
of dishwasher tablets can vary depending
on
the
temperature
and
duration
of
3, depending on how dirty used are
depending
on
how dirty
the3 or
dishes
are.
theThese
marked
at either
cm
25 cm
programme.
As a result,
it is15recommended
that
powder detergents should
3 of
be used
the
dishes
are.
If your
dishes
are
in
need
of
an
intensive
wash,
then
add
5
cm
in the shorter programmes to allow better performance.
into
prewash
section
of the
compartment
2).
If detergent
your dishes
arethe
in need
of an
intensive
wash,
then add 5“a”
cm3(figure
of
3. Then close the detergent compartment lid until the latch locks.
CDA
detergent
into the
sectiondetergent,
of the compartment
in figure 1).salt
recommends
the prewash
use of separate
rinse aid and(adishwasher
rather
than
combination
tablets
as separateslid
achieve
better
wash
performance.
3.
Then
close
the detergent
compartment
until the
latch
locks.
fig 1
Please note: You should only use detergents designed specifically for
Detergent
fig 2
fig. 1
use in dishwashers.
To fill
thedo
detergent
compartment
If you
use combination
add salt and designed
rinse aid tospecifically
the dishwasher
Please
note:
You shoulddetergents,
only use detergents
for
1. use
Push
the
latch as
figure 1.
and
then
adjust
theshown
water in
hardness
setting and rinse aid setting to the
in
dishwashers.
If using dishwasher
tablets,
always
use the
detergent
compartment,
When you
then use
separate
detergents
again,
you shoulddo
fillnot
theput
2. minimum.
Add
the
amount
of detergent.
The
detergent
them
in required
the main body
of the
dishwasher or
in main
the cutlery
basket. The solubility
salt
and rinse aid“b”
compartments,
adjust
the
waterfor
hardness
setting
to the
compartment
(figure
2)
has
lines
to
allow
specific
amounts
of
of
dishwasher
tablets
can
vary
depending
on
the
temperature
and
duration
of
Ifmaximum
using dishwasher
tablets,
always
use
theadjust
detergent
compartment,
do
not put
and
runAs
an
wash,
then
the
hardness
setting
and
3 orwater
3, to
the programme.
result,
it is
powder
detergents
should
detergent.
These
areaempty
marked
atrecommended
either
15incm
25
cm
be
them
in the
main
body
of
the
dishwasher
or
thethat
cutlery
basket.
The solubility
the
rinse
aid
setting
to
the
appropriate
level.
be
used
in the
shorter
programmes
to allow
better
performance.
used
depending
on can
how
dirty
the dishes
of
dishwasher
tablets
vary
depending
onare.
the
temperature
and duration of
the
programme.
Asina result,
it is
thatthen
powder
detergents
If your
dishes are
need of
anrecommended
intensive wash,
add 5
cm3 of should
Salt
be
usedrecommends
in the
shorter
programmes
to allow
performance.
detergent
into
the the
prewash
ofdetergent,
thebetter
compartment
“a”dishwasher
(figure 2). salt
CDA
use ofsection
separate
rinse aid and
rather
than
combination
tablets
as separatesneeds
better
wash
performance.
ensure
thethe
best
efficiency,
the dishwasher
soft
water.
Hard
water
3. To
Then
close
detergent
compartment
lid achieve
until the
latch
locks.
means
that lime residues
on the
dishes and
theaid
interior
of the
CDA
recommends
the useremain
of separate
detergent,
rinse
and dishwasher
salt
dishwasher,
affecting
performance.
Theadd
softener
system
designed
to
If youthan
do use
combination
detergents,
salt
and
rinseisaid
to the
dishwasher
rather
combination
tablets
as separates
achieve
better
wash
performance.
remove
the
ions
that
make
the
water
hard
to
provide
the
best
quality
wash
Please
note:
You
should
only
use
detergents
designed
specifically
for
and then adjust the water hardness setting and rinse aid setting to the
This is
achieved
byseparate
using dishwasher
useperformance.
in
dishwashers.
minimum.
When
you
then use
detergentssalt.
again, you should fill the
If salt
youand
do use
detergents,
andhardness
rinse aidsetting
to the to
dishwasher
rinsecombination
aid compartments,
adjustadd
thesalt
water
the
maximum
and the
run water
an empty
wash, setting
then adjust
water
hardness
and
then adjust
hardness
and the
rinse
aid setting
to setting
the and
To
add
dishwasher
salt,
follow
the
steps
below:
If using
tablets,
always
use the detergent
do not
thedishwasher
rinse aid
setting
the
appropriate
level.
minimum.
When
youtothen
use
separate
detergentscompartment,
again, you should
fill put
the
them
therinse
main
body
ofdishwasher
the dishwasher
inwater
the
cutlery
basket.
Thetosolubility
1. inRemove
the
lower
basketor
and
then
unscrew
the
salt
salt
and
aid
compartments,
adjust
the
hardness
setting
the
of dishwasher
tablets
can
vary
depending
and duration
compartment
as
shown
in figure
1. the temperature
maximum
and
runcap,
an empty
wash,
thenon
adjust
the water hardness
settingofand
Salt
thethe
programme.
As a result,
itappropriate
is recommended
that powder detergents should
setting
to thewith
level.
2. rinse
Fill theaid
compartment
dishwasher
salt (do not use table salt), carefully
To
ensure
the
best
efficiency,
the
dishwasher
needs
soft
water.
Hard
water
be usedtoinprevent
the shorter
programmes
to(figure
allow better
performance.
unnecessary
spillage
3). Before
first
use, you
should
means that lime
residues remain
on the dishes
and the
interior
of the
fill
the
compartment
with
2kg
of
dishwasher
salt
and
then
fill
up
the
dishwasher, affecting performance. The softener system is designed to salt
Salt
compartment
with
water
(upwater
to the
brimtoofprovide
the compartment)
as shown
remove
the ionsthe
that
the
hard
theand
best
quality
wash
CDA
usemake
of separate
detergent,
rinse
aid
dishwasher
salt
Torecommends
ensure
the3.best efficiency,
the dishwasher
needs
soft
water.
Hard water
in figure
performance.
This is achieved
by
using dishwasher
salt. wash performance.
rather
than
combination
tablets
as
separates
achieve
better
means that lime residues remain on the dishes and the interior of the
3. Replace the
cap and
the lower basket.
dishwasher,
affecting
performance.
The softener system is designed to
remove
the
ions
that
make
the the
water
hard
toand
provide
best
quality
wash
To
add
dishwasher
salt,
follow
steps
below:
If you do use combination detergents,
add
salt
rinse the
aid to
the
dishwasher
performance.
This
is achieved
using
dishwasher
salt.
1. Remove
the
lower
dishwasher
basket
and
then
unscrew
the saltthe
warning
light
on by
the
control
panel
illuminates,
you
should
andWhen
then
adjust
water
hardness
setting
and
rinse
aid
settingthe
tosalt
the
shown
in figure
refill compartment
theWhen
salt compartment
with
salt
only
–1.do not again,
add water
the salt
minimum.
you cap,
thenasuse
separate
detergents
you to
should
fill the
compartment
aftersalt,
the first
use.adjust
2.add
Fill
theaid
compartment
with
dishwasher
salt (do
not usesetting
table salt),
carefully
saltTo
and
rinse
compartments,
thebelow:
water
hardness
to the
dishwasher
follow
the
steps
to
prevent
unnecessary
spillage
(figure
3).
Before
first
use,
you
should
maximum and run an empty wash, then adjust the water hardness setting and
1. Remove
the lower dishwasher
basket
and then
unscrew
thefillsalt
fill
the
compartment
with
2kg
of
dishwasher
salt
and
then
up
the
theYou
rinseshould
aid setting
the appropriate
level. immediately after adding salt
run ato
prewash
programme
compartment
cap,
shown
into
figure
2. of the compartment) as shown
compartment
withaswater
(up
the brim
dishwasher
salt,
to
prevent
any
damage
to the
figure
3.
2. Fillinthe
compartment
with dishwasher salt (do
notdishwasher
use table salt),systems.
carefully
Salt
3. toReplace
preventthe
unnecessary
spillage.
Before first use, you should fill the cap and the
lower basket.
compartment
with 2kg of
salt
and then
fill up the
saltwater
To ensure
the best efficiency,
thedishwasher
dishwasher
needs
soft water.
Hard
compartment
with water
(up
tothe
thedishes
brim of
the
compartment)
as shown means
thatthe
lime
residues
remain
onthe
and
the
interior of
the
When
salt
warning
light
on
control
panel
illuminates,
you
should
in figure
3.
dishwasher,
performance.
Theonly
softener
system
designed
refill theaffecting
salt compartment
with salt
– do not
add is
water
to thetosalt
3.compartment
Replace
the
capmake
and
remove
the ions
that
thelower
water
hard to provide the best quality wash
after
thethe
first
use. basket.
performance. This is achieved by using dishwasher salt.
When
the salt
warning
light
on the control
panel illuminates,
you
You should
run
a prewash
programme
immediately
after adding
refill the
salt
compartment
with salt
only
– do not add
water
dishwasher
salt,
to
prevent
any damage
to the
dishwasher
systems.
To should
add
dishwasher
salt,
follow
the steps
below:
to the salt compartment after the first use.
1. Remove the lower dishwasher basket and then unscrew the salt
compartment cap, as shown in figure 1.
should
run a programme
immediately
after
dishwasher
2. You
Fill the
compartment
with dishwasher
salt (do not
useadding
table salt),
carefully
salt,
to prevent
any damage
the dishwasher
systems.
to prevent
unnecessary
spillageto
(figure
3). Before first
use, you should
fill the compartment with 2kg of dishwasher salt and then fill up the salt
compartment with water (up to the brim of the compartment) as shown
fig 2
fig.
fig21
SALT
fig 3
SALT
fig 3
3
fig.
SALT
fig 3
SALT
fig 2
The efficiency
of your dishwasher depends
of theittap water. To ensure
best efficiency,
thethe
dishwasher
obtained
through
testing strip.
after taking
strip in on the softness
strip.
Testing
stripthrough
is equipped with a system
thefor
hardness
in the
mains water supply. The efficiency will increase when the
of water.
water
1 out
your that
tap reduces
system is correctly set.
To
the water hardness level of your water supply you can use the test strip supplied or
1 find out sec.
The washing for
effectiveness
of your machine depends on the softness of the tap water. For this
alternatively contactmin.
your local water board.
reason, your machine is equipped with a system that reduces the hardness in mains water
supply. The washing effectiveness will increase when the system is correctly set. To find out
Lime
the water hardness level of water in your area, contact your local water board orNodetermine
Very low lime content
water hardness level by using the test strip(if available).
Low lime content
Medium lime content
Keep the
Run
Open the adjustment
Softener
Wait for
Make your machine’sLime
water
hardness
Shake the
content
1 min.
setting according to the
testing strip
testing
water
Highresult
Lime content
testing
The efficiency
of
your
dishwasher
depends
on
the
softness
of
the
tap
water.
To
ensure
best
efficiency,
the
dishwasher
obtained through the testing strip.
after taking it
strip in
through
strip.
is equipped with a system
thefor
hardness
in the
mains water supply. The efficiency will increase when the
of water.
water
1 out
your that
tap reduces
system is correctly set.
the water hardness level of your water supply you can use the test strip supplied or
forTo
1 find out sec.
1.
Open thecontact
testingmin.
strip.local water board.
alternatively
your
Adjusting salt consumption
2. Run water through the tap for one minute.
No Lime
Very low lime content
Low lime content
3. Table
Hold theof
testing
stripHardness
in water for one
second.
Water
Level
Settings
4. Shake the testing strip after taking it out of the water
If the hardness of the water you use is above 90 dF (French hardness) or if youMedium
are using
well
lime content
water; you are recommended to use filter and water refinement devices.
Lime content
5. Wait for one minute
6. Check the number of marks on the strip to see the level of water hardness.
High Lime content
If the hardness of the water you use is above 60 dE or if you are using well water; you are recommended to use filter and
1.
Open
the testing
strip.
water
refinement
devices.
Adjusting salt consumption
2. Run water through the tap for one minute.
3. Table
Holdnote:
theof
testing
stripHardness
in water
water for
one
second.
Please
The
level
of
hardness
is Settings
preset to level 3.
Water
Level
4. Shake the testing strip after taking it out of the water
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well
water; you are recommended to use filter and water refinement devices.
5. Wait
minute
1.
Press for
andone
hold
down the programme selection button
6.
thepower
number
of marks
on the
see the level of water hardness.
2. Check
Press the
button
to switch
onstrip
the to
dishwasher
3. Keep the programme selection button pressed until the five programme indicator lights and the end of programme
indicator
light
flash.
If the
hardness
of the
water you use is above 60
63dE
dE or
or if you are using well water;
water; you are recommended to use filter and
water
devices.
4. To refinement
adjust the level,
press the programme selection button until the required level is selected. The programme lights
will illuminate as in the table of water hardness settings.
Hardness
level
is adjusted
tothe
level
3 as a factory setting.
5. NOTE:
To store
the
selected
water
hardness
level,ispress
power
Please
note:
The
level of
water
hardness
preset
to
levelbutton.
3.
1. Press and hold down the programme selection button
2. Press the power button to switch on the dishwasher
3. Keep the programme selection
until the five programme indicator lights and the end of programme
Washbutton
light is pressed
on
indicator light flash.
Rinse light is on
4. To adjust the level, press the programme selection button until the required level is selected. The programme lights
Dryoflight
is on
will illuminate as in the table
water
hardness settings.
Hardness
level
is adjusted
to level 3 as a factory setting.
5. NOTE:
To store the
selected water
hardness
End
light islevel,
on press the power button.
Wash and End lights are on
Rinse and End lights are on
9
To adjust the water softener level
1. Turn the programme selection dial to zero (reset) when the dishwasher is switched off.
2. Press and hold in the start/pause button.
3. Whilst holding in the start/pause button, switch on the dishwasher using the power on/off button.
4. Release the start/pause button once the indicator lights have flashed.
The indicators will show the last selected water hardness setting.
9 the indicators show the correct level.
5. To adjust to the level required, press the start/pause button until
6. To save the set level, press the on/off button again.
nse Aid
RinseRinse
Aid Aid
fill the rinse
aid compartment
Rinse
Aid
To fill theTorinse
aidrinse
compartment
fill
the
aidcompartment
compartment
To
fill
the
rinse
aid
Open the rinse aid compartment
by turning and removing the cap as
1.
Open
the
rinse
aid
compartment
by turning
and removing
the cap
1.
Open
the
rinse
aid compartment
by turning
and removing
the as
cap as shown in figure 4.
1. Open the rinse aid compartment by turning and removing the cap as
inshown
shown
figurein4.figure 4.
in figure 4. until the rinse aid indicator goes dark,
Fill the rinse shown
aid compartment
2.
Fill
the
rinse
aid compartment
until
the aid
rinse
aid indicator
dark, 2. Fill the
rinse
aid
compartment
until the
rinse
indicator
goesgoes
dark,
2.
Fill
the
aid compartment
until
the rinse
aid indicator
dark,
as shown in
5rinse
(where
a indicates
the
compartment
is empty,goes
and
figure
as shown
in figure
5 (where “a”
indicates
the compartment
is empty, and as shown
in
figure
(where
a indicates the compartment
is empty, and
shown
in 5
figure
5 (where
“b” indicates
the
compartment
is full).a indicates
as
“b”
indicates
the compartment
is full).the compartment is empty, and
“b” indicates
the compartment
is full).
“b” indicates
the compartment
is full).
3. cap,
Replace
the cap,
theup
capwith
line the
up with the Replace the
ensuring
theensuring
markersthe
onmarkers
the caponline
3. Replace
the cap,the
ensuring
the
markers
on the
cap
up with
thethe
3. Replace
cap,prior
ensuring
the markers
onback
the line
cap
line
up with
compartment
to screwing
the
cap
in place.
compartment prior to screwing the cap back in place.
compartment
prior
to screwing
theback
cap back
in place.
compartment
prior to
screwing
the cap
in place.
fig 4
fig.fig
4 44
fig
Rinse Aid Adjustment
nse Aid
Adjustment
The
level
of
rinseAdjustment
aid use is preset to 3. You can adjust the level of rinse aid
Rinse
Aid
Rinse
Aid
Adjustment
use by
as shown
in You
figure
6. adjust the level of rinse aid
level of rinse
aidadjusting
userinse
is preset
tois4.preset
can
The
use
4. can
Youadjust
can adjust
the level
of rinse
The level
oflevel
rinseofaid
useaid
is preset
to 4. to
You
the level
of rinse
aidaid
by adjusting
as
shown
in
figure
6.
use by adjusting as shown in figure 6.
use by adjusting as shown in figure 6.
If water stains form on the dishes after a wash, the level should be increased.
If blue stains which can be wiped away are left on the dishes after a wah, the
water on
stains
form
on after
the dishes
afterthe
a wash,
levelbe
should
be increased.
ater stainsIflevel
form
the
dishes
a wash,
level the
should
increased.
be decreased.
If water stainsshould
form on
the dishes after a wash, the level should be increased.
If
blue
stains
which
can
be
wiped
away
are
left
on
the
dishes
after
wash, the
ue stains which can be wiped away are left on the dishes after a wash,athe
If blue stains which can be wiped away are left on the dishes after a wash, the
level
should
be
decreased.
l should be
decreased.
Please
note: Rinse aid ensures better quality wash results and
level should
be decreased.
fig.
figfig555
fig 5
increased drying performance.
Please note: Rinse aid ensures better quality wash results and
ase note: Rinse aid ensures better quality wash results and
Please increased
note:
Rinse
aid
quality
results and
drying
performance.
Always
refill
theensures
rinse aidbetter
when the
rinsewash
aid indicator
light on the
reased drying performance.
control
panel
is illuminated.
increased
drying
performance.
Always refill the rinse aid when the rinse aid indicator light on the
ways refillcontrol
the rinse
aid
the rinse aid indicator light on the
panel
is when
illuminated.
Always refill the
rinse
aid when the rinse aid indicator light on the
trol panel is illuminated.
control panel is illuminated.
fig.fig6 6
fig 6
fig 6
Dishwasher Baskets
Alternative basket loads
Lower
Basket
To adjust
the height of the upper basket:
1. Open the basket retaining clips, as shown in figure 7, but turning them to
the side.
2. Remove the upper basket, and relocate the alternate set of wheels on the
runner, as shown in figure 8, pushing the basket back into place.
3. Close the basket retaining clips.
fig 7
The images below are designed as guidance as to best practice for loading
the dishwasher.
Top basket
Upper basket
fig 8
Alternative
Alternative
basket
basket
loads
loads
Lower basket
Faulty
loads
Lower
Lower
Basket
Basket
Bad loads
Top
Top
basket
basket
18

Faulty
Faulty
loads
loads
Standard loading and Test Data
Capacity
• Upper and lower baskets: 12 place settings.
• The upper basket should be adjusted to high position.
• Cups should be placed on to the dish rack pins.
Detergent / Rinse aid
• 5 + 25 cm3, in accordance with EN50242-DIN 44990 IEC 436
(international norms) / Rinse aid dosage adjustment: 4.
Programme test
• Economic 50°C, in accordance with EN 50242 (international norms.).
Programme Listing
Programme
names and
temperatures
Prewash
No heat
Quick
40O wash
Economic
50O wash
Normal
55O wash
Intensive
65O wash
Extra
intensive
(Prewash
and intensive
Type of food
waste
Pre-wash to
rinse and loosen
residue-awaiting
full load-then
select a
programme
Coffee, milk,
tea, cold meats,
vegatables, not
kept for long
Coffee, milk,
tea, cold meats,
vegatables, not
kept for long
Soups, sauses,
pasta, eggs, pilaf,
potatoe and
oven dishes, fried
foods
Soups, sauses,
pasta, eggs, pilaf,
potatoe and
oven dishes, fried
foods
Soups, sauses,
pasta, eggs, pilaf,
potatoe and
oven dishes, fried
foods
Level of soil
-
Small
Medium
Medium
High
High
Detergent
amount
A: 25cm3/
15cm3
B: 5cm3
-
A
A+B
A+B
A+B
A+B
Prewash
Prewash
Prewash
Prewash
Prewash
50O wash prewash
40O wash
50O wash
55O wash
65O wash
70O wash
Cold rinse
Cold rinse
Cold rinse
Cold rinse
Cold rinse
Warmish rinse
Hot rinse
Hot rinse
Hot rinse
Hot rinse
Hot rinse
Dry
Dry
Dry
Dry
End
End
End
End
End
End
Programme
duration
(mins.)
15
30
150
95
110
150
Electricity
consumption
(kW hours)
0.02
0.68
1.05
1.10
1.55
1.90
Water
consumption
(litres)
4.5
12.4
15.7
16.5
17.2
25.7
Warning: Short programmes do not include a drying stage.
The value and times provided in this table have been obtained under laboratory conditions according to relevant standards. This
information can change depending on the condition of the dishwasher’s use and environment (network tension, water pressure,
water input temperature and environment temperature.)
Unplug
your machine
ime
maythat
accumulate
intemperature,
the machine's
section.InIncase
case
such
gramme
runs at high
andwashing
start the machine.
ofof
insufficiency,
useand turn off its ta
Do not use
hard materials
when cleani
ation;
ecial
cleansing material available in the market. (Cleansing material produced
special
to
and a dampened cloth.
chines
bycompartment
detergent producers.)
etergent
without loading any dishes into the machine,
select a
me that runs at high temperature, and start the machine. In case ofFilters
insufficiency, use
eaning
the
seals inavailable
the machine
eansing
material
in thedoor,
market. (Cleansing material produced
towastes have remain
Check ifspecial
any food
any accumulated
residues in the door seals, wipe the seals regularly
filters. by using a
s clean
by detergent
producers.)
If any food wastes are left, remove the
mpened cloth.
thoroughly under the water tap.
g the seals
inand
the Maintenance
machine door,
Caremachine,
eaning
the
any accumulated
residues in the door seals, wipe the seals regularly by using a
ancloth.
the filters
and spray
arms
at least you
once
a week.
Before beginning
any care
or maintenance,
should
always disconnect the
d
a. Micr
plug your
machine
and
turnsupply,
off its
starting
the cleaning.
appliance
from the
electricity
andtap
alsobefore
turn off the
water supply.
not use hard materials when cleaning your machine. Wipe with a fine cleaning material
gd the
machine,
a dampened
cloth.
e filters Door
andseals
spray arms at least once a week.
our
machine
and turn off its tap before starting the cleaning.
ers
Wipe the dishwasher door seals regularly with a damp cloth to remove
se
hard
materials
when
cleaning
youronmachine.
Wipe
eck if any residues.
food wastes
have
remained
the coarse
andwith
fine a fine cleaning material
mpenedanycloth.
ers.
ny food wastes are left, remove the filters and clean them
roughlyFilters
under the water tap.
b. Coa
c. Meta
To rem
clockw
fig 9
any food wastes have remained on the coarse and fine
You should clean the filters at least once a month.
1. Remove
the lower
basket. the
a. Micro
d wastes
are left,
remove
filters Filter
and clean them
b.
Coarse
Filter
y under2. the
water
tap.
Turn the microfilter anticlockwise and then lift it out as in figure 9.
c. Metal/Plastic Filter
3. Remove the coarse filter from the microfilter (figure 10).
Todishwasher
remove
and clean(figure
the11).
filter
4. Remove the base filtera.
from
the
Micro
Filter compartment
combination, turn it counter
clockwise
and
take
it
out
by
lifting
upwards.1
b. Coarse Filter
fig 10
You should clean and rinse the filters thoroughly before replacing all the
c. toMetal/Plastic
Filter should lock into
sections in reverse order
that above. The microfilter
Pull an
filter. 3
of the
water u
metal/p
filter in
the ma
anothe
metal/p
directio
when t
seen fr
• Never use your dishwasher without
• Incorrect fitting of the filter will reduc
the metal/plastic
To remove
thecoarse
filter combination,
it counter
• turn
Clean
filters are very important in ter
filter. 3 and
Thenclean
pull the
filter out
clockwise
and
take
it
out
by
lifting
upwards.1
of the micro filter.2 Rinse it with lots of
Please note: Never run a programme without the filters in place.
water under the tap. Refit the
Incorrect fitting of the filters may reduce wash performance and
metal/plastic filter. Insert the coarse
potentially damage your
appliance.
Pull
and
the metal/plastic
filter remove
into the micro
filter in a way that
filter.the
3 Then
coarse filter
out
markspull
willthe
correspond
to one
of the
micro filter.2
it with
lots
another.
Attach Rinse
micro filter
into
theof
Spray arms
watermetal/plastic
under the tap.
the to the
filterRefit
and turn
You should clean the spraymetal/plastic
arms direction
at least once aof
month.
arrow
andthe
it iscoarse
locked
filter.
Insert
themicro
arrowfilter
on micro
filter that
can be
filter when
into the
in a way
fig 11
1. Remove the lower basket
seen from
across. 4 to one
the marks
will correspond
place once it is secure as shown
in figure
Pull
and12.remove
2. Pull the lower spray arm upwards to remove it.
another. Attach micro filter into the
Never use
your
dishwasher
without
anyfilter
filter.
3. To
remove
the upper spray
arm, first remove
the nut
on the
upper
metal/plastic
and
turn
tospray
the
ncorrect fitting
of theitfilter
will9.reduce
the
washing
effectiveness.
arm by turning
as indirection
figure
of arrow and it is locked
Clean filters are very important
in terms
themicro
properfilter
running
of the machine.
when the
arrowofon
can be
You should clean and rinse the spray arms thoroughly before replacing
from
4 tightened when
them. Ensure that theseen
upper spray
armacross.
nut is securely
refitting the upper spray arm.
use your dishwasher without any filter.
ct fitting of the filter will reduce the washing effectiveness.
Dishwasher
interior
filters are
very important
in terms of the proper running of the machine.
To deal with an accumulation of dirt, oil or limescale in the dishwasher, run
20 is empty.
an intensive programme with detergent when the dishwasher
Alternatively, there are specialist dishwasher cleaners available that can be used.
fig 12
Failure Codes and Troubleshooting
Your dishwasher control panel is equipped with a diagnostic display to help in the event of a pr
Failure Codes and Troubleshooting
The programme indicators also serve as a diagnostic display to help in the event of a problem with the appliance.
Error Code
Failure
Codes
and
Troubleshooting
Failure Error
Codes
Troubleshooting
codeand
Intensive
Normal
Eco
Quick
Wash
Error description
Prewash
Error
Advice
Your dishwasher
control
panel
is equipped
with
a diagnostic
display
to help in
thethe
event
of a problem with
Your dishwasher control panel
is equipped
with a diagnostic
display to
help
in the event
of a problem
with
appliance.
Start/
description
Rinse
Dry
End
Pause
Make sure the water inlet tap is fully
open. Close the water tap, separate
Error
Code
Error Code
Failure Failure
Codes
and
Codes
Troubleshooting
and
Troubleshooting
Inadequate
the water inlet hose from the tap and
Error description
Error description
Advice
Inadequate water
water
supply
clean
the filter.
Restart
your
machine
Intensive
Eco
Quick
Prewash
Intensive YourNormal
EcopanelNormal
Quick
Prewash
dishwasher
Your
control
dishwasher
control
is equipped
panel
with
is equipped
a diagnostic
with
display
a diagnostic
to help
display
in theto
event
help
of
in the
a problem
event of
with
a problem
the
appliance
with
supply
and contact CDA service if the error
continues.
Make
Make sure the water inlet tap
is
Error
Code
Error
Code
Failure
Codes
and
Troubleshooting
fully open
Failure Codes and
Failure
Troubleshooting
Codes and
Troubleshooting
Close the tap
and contact
Error
description
Error description
Advice
Continual fill
Close
Close the water tap, separate
thet
service.
Intensive
Intensive
Normal
Eco
Eco
Quick
Quick
Prewash
Prewash
Your
dishwasher
control
panelto
iserror
equipped
a diagnostic
display
help
inInadequate
the
event
of
a problem
with
Your dishwasher control panel
Your
dishwasher
is equipped
control
with
a diagnostic
panelNormal
is equipped
display
with
help
a diagnostic
in thewith
event
display
of
a problem
toCDA
help
in
with
theto
the
event
appliance.
of
a problem
with
the
water
water
Inadequate
water
water
inlet
hose
from
theappliance
tap
andi
supply
supply
cleanContinual
the filter fill error
Resta
Restart your machine, contact
sureresumes
the
Make
wate
CDA
s
CDA service ifMake
the error
Drain
hose
is
blocked.
fully ope
Error Code
Error Code Error Code
The
filters
of
your
machine
might
The waste
Codes
and
Troubleshooting
Failure Failure
Codes
and
Troubleshooting
Error
description
Error description
Error description
Advice
Advice
Close the water
Close
tap,t
blocked.
waterEco
in the
Quick
Intensive
Normal Intensive
Eco Intensive
Normal
Quick Normal
Eco
Prewash
Quick
Prewash bePrewash
Inadequate
water
Inadequate
water
water
water
from
in
Restart
the
dishwasher
and cancel
machine
cannot
Yourcontrol
dishwasher
panelwith
is equipped
with display
a diagnostic
display
toevent
help
in
event
of
a problem
withinlet
the hose
applianc
Your dishwasher
panelcontrol
is equipped
a diagnostic
to help
in the
of
athe
problem
with
the appliance.
supply
supplyThe waste
clean
the in
fi
water
the programme. If the
error
be discharged.
Clo
Close the the
tap
and contact
Restart
yourcanno
machi
Resta
continues
contact
CDA service.
machine
Continual fill
error
Continual
fill error
Make
CDA
service
Make sure the water inlet
tap
Make
isservice
sure the
wate
CDA
ifCDA
the
ese
be
discharged.
fully open
fully ope
Error Code Error Code
Close
Close
water tap, separate
Close
thethe water
tap,t
Errorthe
description
Advice
Error description
Advice
Failure
Codes
and Troubleshooting
Failure Failure
Codes
and
Failure
Troubleshooting
Codes
and
Troubleshooting
Codes
and
Troubleshooting
D
Drain
is inlet
blocked
Inadequate
water
water
in
Inadequate
water
Inadequate
water
water
inlet hose
from
thehose
tap
water
and
hose
from
Normal
Eco
Prewash
Intensive Intensive
Normal
Eco
QuickHeaterQuick
Prewash
Contact CDA
service.
error
The
The
filters
of
your
machine
supply
supply
supply
clean
the
filter
clean
the
fi
Your
dishwasher
control
panel
is
equipped
with
a
diagnostic
display
to
help
in
the
event
of
a
problem
with
Your dishwasher
panel
Yourcontrol
dishwasher
is equipped
with
a diagnostic
panelwith
is equipped
to
with
help
a diagnostic
in thetoevent
display
of the
a problem
toevent
help of
inwith
the
the
event
appliance.
of
a problem
with the appliance
Yourcontrol
dishwasher
panelcontrol
is equipped
adisplay
diagnostic
display
help
in
a problem
with
the appliance.
might
be
blocked
Close
the
tap
Clos
an
Resta
The
wastecontact
water
in your machi
The waste water
in your
Restart
machine,
Restart
Continual
fillContinual
error
fill
error
Heater
error
Rest
Restart
dishwasher
and
CDA
serv
machine
cannot
the machineCDA
cannot
service ifthe
the
errorthe
resumes
CDA
service
ifCDA
the
ese
Make
sure
Make
sure the
water
inletthe
tapwate
isca
cancel
the
programme
be discharged.
be discharged.
fully
ope
open contact
If the
If the errorfully
continues,
Error
Code
Error
Code
Error
Code
Error Code
Close
water
tap,
Close the water
tap,
separate
the
Drain
hose
isDb
Alarm
isthe
active
again
Turn off the dishwasher and
Alarm
is active
Failure Codes and
Failure
Troubleshooting
Codes
and
Troubleshooting
CDA
service
Error
description
Error description
Error
description
Advice
Advice
Error
description
Advice
Inadequate
waterinlet
water
inlet
hose
from
Inadequate
water
water
hose
from
the
tap
and
disconnect
from
the
water
supply.
againstEco
water
The
filters
ofThe
you
water
overflow
Intensive
Normal
Quick
Prewash
Intensive
Normal
Intensive
Eco
Normal
Quick
Eco
Prewash
Quick
Prewash
Intensive
Normal
Eco
Quick
Prewash
supply
clean
the
Your dishwasher control panel
Your dishwasher
is equippedcontrol
with a diagnostic
panel is equipped
display overflow
to
with
help
a diagnostic
in the event
display
of Contact
a problem
tosupply
helpCDA
in
with
the
the
event
appliance.
of
aand
problem
with
the
appliance
service.
clean
the
filter
might
be
blo
Clos
Close
the
tap
contact
Close
the
tap
anfi
The
waste
water
The
in
waste
water
in
Continual
fill
error
Continual fill error
Continual
fill
error
Restart
mach
Restart
your
machine,
contact
Restartyour
the
dishw
Rest
CDA
service
CDA
serv
the machine
the
cannot
machine
cannot
service
if the
CDA
service
ifCDA
thecancel
error
resumes
Heater
error
Heater errorbe discharged.
Contact
CDA
service
the
prog
caeC
Faulty
electronic
car
be
discharged.
Make
Make sure the
water
inlet
Make
is error
sure
the
wate
Make
sure
thetap
water
inlet
tap
is
If
the
continu
If
the
fully
ope
fully open
Error Code
Error Code
Drain fully
hoseopen
is blocked
DrainCDA
hoseserv
isDb
Failure Codes
andFaulty
Troubleshooting
Turn
Failure Codes and
Troubleshooting
Turnthe
offwater
theClose
dishwasher
and
Close
Overheating
Error description
Error
description
Advice
Advice
Close
the
water
thethe
water
tap,
Close
tap,
separate
the
The
Alarm
isseparate
active
against
The
filters
of tap,
your
machine
The
filters
oferror
yout
Alarm
is active
against
Contact
CDA
service.
disco
disconnect
the
water
supply
Intensive
Normal Intensive
Eco
Normal
Quick
Eco
Prewash
Quick
Prewash
Inadequate
water
water
in
(temperature
inand
the
Inadequate
water
Inadequate
water
water
inlet
hose
from
the
tap
water
and
inlet
from
Inadequate
water
water
inlet
hose
from
thehose
tap
electronic
card
water
overflow
might
be
blocked
might
be
blo
The
waste
water
in
Your with
dishwasher
control
panel
is help
equipped
with
awater
diagnostic
display
to
help
in
the
event
of
a problem
with
The
waste
in overflow
The
water
in
Your dishwasher control panel is equipped
a diagnostic
display
to
in the
event
ofwater
a problem
withwaste
the
appliance.
Contact
CDA
service
Close
the
tap
an
Close
the machine
tap
and
contact
supply
is
too
high
supplyContinual
supply
clean
the
filter
clean
the
fiC
supply
clean
the
filter
Rest
Restart
the
dishwasher
and
Restart
the
dishw
Continual
fillthe
error
machine
cannot
fillthe
error
the machine cannot
machine
cannot
CDA
serv
CDA
service
Resta
Restart
your
machine,
contact
Restart
your
Restart
your
machine,
contact
Heater
error
Heater
error
Contact
CDA
caC
cancel
the
programme
cancel
themachi
prog
be
discharged.
be discharged.
be
discharged.
CDA
service
ifCDA
the
error
resumes
service
ifCDA
service
ifCDA
the
error
resumes
Ifthe
theese
Make
sure the
water
inlet
tap
Make
iscard
sure
the
wate
If
the
error
continues,
contact
If
the
error
continu
Faulty
electronic
C
Faulty electronic
card
Contact
CDA
service
Faulty
heater
senso
fullyservice
open
fullyserv
ope
Overheating
CDA
Error Code
Error Code
Turn
offCDA
the
Turn
dishw
Drain
hose
is
b
Drain
hose
is
blocked
error Error description
Alarm
Alarm
against
activeClose
against
Close is
theactive
water
tap,isdescription
separate
thethe water tap,
Error
Advice
the
disco
wa
The
filters
of
you
The
ofdisconnect
your
machine
Overheating
error
Overheating
error
ContactPrewash
CDA
service.
(temperature
in
Eco Inadequate
Quick
water
water
overflow
water
Inadequate
water
water
inletoverflow
hose
fromfilters
the
tap
water
andinlet
hose from
Intensive
Normal
Eco Intensive
Quick Normal
Prewash
Contact
CDA
C
might be
blo
might be
the machine is supply(temperature
(temperature
inblocked
the
The
waste
water
in
in the
CDA
service
The waste water
in
supply
clean
the Contact
filter
clean the fiC
Clos
Restart
theand
dishw
too high.) Heater error
Restart
dishwasher
Close
theerror
tap
andservice
contact
Close
the
tap
anC
Close
the
tap
and
contact
isthe
too
high)
machine
cannot
is too
high)
Heater
error
the
machine
cannot
Heater
Contact
CDA
Contact
CDA
Restart
your
machine,
contact
Restart
your
machi
Continual
fill
error
Continual fillmachine
error
Continual
fillmachine
error
Continual
fillthe
error
cancel
the serv
prog
cancel
the
programme
CDA
service
CDA
CDA
service
be electronic
discharged.
be discharged.
CDA
if the
error
resumes
CDA
service
ifMake
the eC
Faulty
Faulty
card
electronic
card
CDA
Makeservice
sure the
inlet
tap
isContact
If the
error
continu
If water
the error
continues,
contact
Faulty
heater
sensor
Faulty heater sensor
Contact
CDA
service
Turn
fully
open
Turn off the
dishwasher
Turn
offCDA
the dishw
servC
CDAand
service
Alarm
is active
against
Alarm is active against Alarm
is
active
against
Close
t
disco
Db
Close
the
water
tap,
separate
the
disconnect
the
supply
disconnect
the
Drain
hose
iswater
blocked
hose
iswa
Drain
hose
isDrain
blocked
Overheating
Overheating
error
error
Faulty heaterwater overflow
water
overflow
water
overflow
Contact
CDA
service.
Inadequate
water
water
Cin
The
water
inlet
hose
from
the
tap
and
CDA
service
Contact
TheContact
filters
of
your
machine
The
filters
ofCDA
you
The
of
your
machine
sensor Inadequate water
(temperature
(temperature
in
thefilters
in
the
Contact
CDA
C
supply
supply
clean
the
filter
might
be
blocked
be blo
might
behigh)
blocked
The
waste
water
inmight
machine
is too
machine
high)
is too
The waste
water
in
The
waste
water
in
The waste
water
in
Close
the
tap
and
contact
Close
the tap
an
Continual
fillthe
error
Continual
fill
error
Resta
Heater
error
Contact
CDA
Heater
error
Contact
CDA
service
Rest
Restart
your
machine,
contact
Restart
the
dishwasher
and
Restart
theand
dishw
Restart
the
dishwasher
the
machine
cannot
the
machine
cannot
the
machine
cannot
machine
cannot
CDA
service
CDA
servC
Faulty
electronic
card
Faulty
electronic
card Faulty
Contact
electronic
CDA
card
service
Contact
CDA
CDA
case
CDA
service
if
the
error
resumes
cancel
the
programme
cancel
the
prog
cancel
the
programme
be
discharged.
be discharged.
be
discharged.
be discharged.
Faulty
heatercontinues,
Faulty
heater
IfCDA
theC
If the error
contact
Ifsensor
theContact
error
continu
Ifsensor
the error
continues,
Turn
off contact
the
dishw
Turn off the dishwasher
and
Alarm
is active
against
Alarm
against
CDA
service
serv
CDA error
service
Overheating
Overheating
erroris active
Overheating
error
Drain
hose
is blocked
DrainCDA
hose
iswa
b
11
disconnect
the
disconnect
the
water
supply
water
overflow
(temperature
in
the
C
(temperature inwater
the overflow
(temperature
Contact
CDA
inyour
the
service
Contact
The
filters
of
machine
The
filters ofCDA
you
Contact
CDA
Contact
CDA
service
machine is too high)
Failure Code and Troubleshooting
Problem
The programme will not start
Water remains inside the dishwasher at the end of the
programme
Possible cause
Check the plug, fuse and circuit breakers of the mains supply
The water tap is turned off
The dishwasher door is not fully closed
The water inlet filter or the machine filters are blocked
The water drain hose is blocked or kinked.
knicked
The filters are blocked
The dishwasher stops in the middle of a programme
Power failure
Water inlet failure
Programme is on standby
Wash performance is of a low standard
Poor loading of dishes hinders wash performance.
Insufficient detergent added
Inappropriate wash programme selected
Spray arm blocked
Filters clogged or incorrectly fitted
Water drain pump blocked
White stains on the dishes
Insufficient detergent added
Rinse aid setting is too low
Insufficient dishwasher salt added
Water softener setting is too low
Salt compartment cap not completely closed
The dishes are not completely dry at the end
of the programme
A programme without a drying stage was selected
Rinse aid setting is too low
Dishes unloaded too soon (allow time for drying)
There are rust stains on the dishes
Different sets of cutlery should be kept separate
Too much salt (Water softener setting is too high)
Salt compartment cap not completely closed
Poor appliance earth (check mains electrical supply)
The door is not opening or closing properly
Door tension not correctly adjusted for the décor door
Electrical information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug,
follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in position.
How to connect an alternative plug
If the fitted plug is not suitable for your socket outlet, then it should be cut off and disposed of safely to avoid the risk of
electric shock. A suitable alternative plug of at least 13 Amp rating to BS 1363 should be used.
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:• The wire which is coloured GREEN and YELLOW must be connected to the terminal which is marked with letter (E) or
by the Earth symbol
or coloured GREEN and YELLOW.
• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter (N), or
coloured BLACK or BLUE.
• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter (L) or
coloured RED or BROWN.
If in doubt regarding the electrical connection of this appliance, consult a qualified electrician. Do not shorten the
supply cable, the appliance may require removing for servicing.
N.B. Ensure that the plug socket is situated in an easily accessible place.
Installation
• Do not install this appliance if it is damaged in any way. Installing a
damaged appliance may invalidate the warranty.
• The water supply tap should be located in an adjacent cupboard so that it
can be accessed after installation.
• Ensure the appliance is level by adjusting the feet as necessary.
• Only use the water inlet supplied with the appliance.
• If the water pressure is above 10 bar, a pressure relief valve should be used.
• After connecting the water supply, check to ensure there are no leaks.
• The water outlet can either be connected to a water drain or to a sink outlet
spigot. This connection should be at a minimum of 50 cm and a maximum
fig 14
of 110 cm from the floor. The drain hose should be no longer than 4m in
length to ensure good performance from the dishwasher.
fig 15
fig 16
To contact our Customer Care Department, or for Service,
please contact us on the details below.
Passionate about style
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu