Download Miele DA 219 Technical data

Transcript
Installation
dai2262
^ Secure the limit switch opposite the
guide on the telescopic tower (see
illustration).
dai2260
^ Loosen the top limit switch.
^ Raise and lower the canopy and
check that the limit switch is working.
^ Remove the safety screw and push
the tower downwards.
^ If a greater safety distance "S"
between the canopy and the hob is
required a, raise the canopy until the
required safety distance has been
reached.
^ If a greater adjustable range is
required b, lower the canopy. A
maximum appliance height of 1030
mm is possible.
32
dai2264
^ Then secure the tower with the safety
screw again.
Replace the grease filters.