Download Craftsman 917.377110 Owner`s manual
Transcript
Owner's Manual IC..FTSMnWl ROTARY LAWN MOWER 6.75 Horsepower Power-Propelled 21" Multi-Cut Model No. 917.377110 • EspaSol, p. 20 CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman Estates, Visit our Craftsman website: www.sears.com/craftsman IL 60179 U.S.A. Maintenance ...................................... Service and Adjustments ................... Storage .............................................. Troubleshooting ................................. Repair Parts ....................................... Sears Service .......................... Back Warranty ................................................... 2 Safety Rules .......................................... 2-4 Product Specifications .............................. 4 Assembly / Pre-Operation ..................... 5-6 Operation ............................................ 7-11 Maintenance Schedule ........................... 12 12-15 15-17 17-18 18-19 38-47 Cover LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER For two years from date of purchase, when this Craftsman Lawn Mower is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the owner's manual, Sears will repair free of charge any defect in material or workmanship. If this Craftsman Lawn Mower is used for commercial applies for only 90 days from the date of purchase. or rental purposes, this warranty This Warranty does not cover: • Expendable items which become worn during normal use, such as rotary mower blades, blade adapters, belts, air cleaners and spark plug. • Repairs necessary because of operator abuse or negligence, including bent crankshafts and the failure to maintain the equipment according to the instructions contained in the owner's manual. Warranty service is available by returning the Craftsman power mower to the nearest Sears Parts & Repair Center in the United States. This warranty applies only while this product is used in the United States. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck And Co., D/817 WA, Hoffman Estates, IL 60179 IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. Ai_WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. • 1,CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas. _¢l,Look for this symbol to point out important safety precautions. It means CAUTION!H BECOME ALERT!H YOUR SAFETY IS INVOLVED. • I,WARNING: In order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot come in contact with plug. A_,WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 2 I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting. • Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. • Only allow responsible individuals, who are familiar with the instructions, to operate the machine. • Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could be picked up and thrown by the blade. • Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area. • Do not operate the mower when barefoot or wearing open sandals. Always wear substantial foot wear. • Do not pull mower backwards unless absolutely necessary. Always look down and behind before and while moving backwards. • Do not operate the mower without proper guards, plates, grass catcher or other safety protective devices in place. • See manufacturer's instructions for proper operation and installation of accessories. Only use accessories approved by the manufacturer. • Stop the blade(s) when crossing gravel drives, walks, or roads. • Stop the engine (motor) whenever you leave the equipment, before cleaning the mower or unclogging the chute. • Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher. • Mow only in daylight or good artificial light. • Do not operate the machine while under the influence of alcohol or drugs. • Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle and walk; never run. • Disengage the self-propelled mechanism or drive clutch on mowers so equipped before starting the engine (motor). • If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble. • Always wear safety goggles or safety glasses with side shields when operating mower. II. SLOPE OPERATION Slopes are a major factor related to slip and fall accidents which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it. DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Tall grass can hide obstacles. DO NOT: • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping. III. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. • Be alert and turn machine off if children enter the area. • Before and while walking backwards, look behind and down for small children. • Never allow children to operate the machine. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. IV. SERVICE • Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. - Use only an approved container. - Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. - Never refuel the machine indoors. - Never store the machine or fuel container inside where there is an open flame, such as a water heater. • Never run a machine inside a closed area. • Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away 3 from the plug to prevent accidental starting. • Keepnuts and bolts, especially blade • Grasscatchercomponentsare subject attachmentbolts, tight and keepequipto wear, damage,and deterioration, ment in good condition. which could expose moving parts or • Nevertamperwith safetydevices.Check allow objectsto be thrown.Frequently their proper operationregularly. check componentsand replacewith • Keep machine free of grass, leaves, or manufacturer'srecommendedparts, otherdebrisbuild-up.Cleanoilorfuelspillwhen necessary. age.Allow machineto coolbeforestoring. • Mowerbladesare sharp and can cut. • Stop and inspectthe equipmentif you Wrap the blade(s)or wear gloves,and strike an object. Repair,if necessary, use extra caution when servicingthem. before restarting. • Do not changethe enginegovernorset• Neverattempttomakewheelheightadjustting or overspeedthe engine. mentswhilethe engine(motor)is running. Serial Number: Date of Purchase: GasolineCapacity/Type: 1.6 Quarts (Unleaded Regular) Oil Type (API-SF-SJ): SAE 30 (above 32°F); SAE 5W-30 (below 32°F) Oil Capacity: 20 Ounces Spark Plug (Gap: .030") Champion RJ19LM or J19LM Blade Bolt Torque: 35-40 ft. Ibs. • The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above. Repair Protection Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That's when having a Repair Protection Agreement can save you money and aggravation. Fast help by phone - phone support from a Sears technician on products requiring in-home repair, plus convenient repair scheduling. Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online. Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That's the kind of professionalism you can count on to help prolong the life of your new purchase for years to come. Purchase your Repair Protection Agreement today! Some limitations and exclusions apply. For prices and additional information call 1-800-827-6655. Purchase a Repair Protection Agreement now and protect yourself from unexpected hassle and expense. Here's what's included in the Agreement: • • • • Agreements Expert service by our 12,000 profesional repair specialists. Unlimited service and no charge for parts and labor on all covered repairs. Product replacement if your covered product can't be fixed. Discount of 10% from regular price of service and service-related parts not covered by the agreement; also, 10% off regular price of preventive maintenance check. Sears Installation Service For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. call 1-800-4-MY-HOME®. 4 These accessories were available when this lawn mower was produced. They are not shipped with your mower. They are also available at most Sears retail outlets and service centers. Some of these accessories may not apply to your lawn mower. LAWN MOWER PERFORMANCE CLIPPING FOR REAR DEFLECTORS DISCHARGE LAWN MOWERS ___ \\ _\\ \\\ LAWN MOWER STABILIZER GRASS CATCHERS FOR GRASS CATCHERS FOR LAWN MOWERS REAR DISCHARGE LAWN MOWERS SIDE DISCHARGE MAINTENANCE MUFFLERS BELTS AIR FILTERS BLADES BLADE ADAFq'ERS Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. SPARK PLUGS WHEELS ENGINE OIL TO REMOVE LAWN MOWER FROM CARTON 1. Remove loose parts included with mower. 2. Cut down two end corners of carton and lay end panel down flat. 3. Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle. 4. Roll lawn mower out of carton and check carton thoroughly for additional loose parts. 5 TO ASSEMBLE GRASS CATCHER 1. Slide grass catcher bag over the frame. Make sure the rear handle is on top (the same side as the front handle) and the strap is on the bottom. 2. Slip vinyl bindings over frame. NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using. 3. Close grass catcher door. NOTE" When fully closed, door will "snap" shut over frame and vinyl bindings. HOWTO SET UPYOUR LAWN MOWER TO UNFOLD HANDLE IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables. 1. Raise lower handle section to operating position and align hole in handle with one of the height positioning holes in handle bracket. 2. Insert handle bolt through handle and bracket and secure with knob. 3. Repeat for opposite side of handle. 4. Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs. 5. Remove any packing material from around control bar. Your lawn mower handle can be adjusted for your mowing comfort. Refer to "ADJUST HANDLE" in the Service and Adjustments section of this manual. iiii Operator presence control bar Front LIFT UF Mowing position Bolt Knob Vinyl Handle" bracket s j TO INSTALL 6 ATTACHMENTS Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging or discharging, see '%0 CONVERT MOWER" in the Operation section of this manual. KNOWYOUR LAWN MOWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER, Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments, Save this manual for future reference, These symbols may appear on your lawn mower or in literature product. Learn and understand their meaning. CAUTION OR WARNING ENGINE ON ENGINE OFF FAST SLOW CHOKE FUEL supplied with the OIL DANGER, KEEP HANDS AND FEET AWAY Operator presence control bar Drive control lever Starter handle' knob fne of] cap with dipstick Grass catcher Muffler Dual point height adjuster lever Gasoline fi]ler oaf Air filter Mulcher door Primer IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE Housing in the engine. MEETS CPSC SAFETY REQUIREMENTS Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the U.S, Consumer Product Safety Commission, The blade turns when the engine is running, Operator presence control bar - must be held down to the handle to start the engine. Release to stop the engine, Primer - pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine. Starter handle- used for starting engine. Drive control lever - used to engage power-propelled forward motion of mower, Mulcher door - allows conversion to discharging or bagging operation. Dual point height adjuster - used to adjust cutting height of lawn mower. 7 • To keep drive control engaged when turning corners, push down on the handle to lift the front wheels off the ground while turning lawn mower. DRIVE CONTROL ADJUSTMENT The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over spectacles. HOWTO USEYOUR ENGINE Over time, the drive control system may become "loose", resulting in decreased speed. There is a button on the u nderside of the drive control housing to increase tension on the drive cable. Proceed as follows: 1. Turn mower engine off and disconnect spark plug wire from spark plug. 2. Pull out button on underside of drive control, then push it back in. 3. Operate mower to see if drive speed has increased. If there is no increase, the drive belt is worn and needs to be replaced. TO ADJUST CUTTING HEIGHT LAWN MOWER SPEED The engine speed was set at the factory for optimum performance. Speed is not adjustable. ENGINE ZONE CONTROL _L,CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running. * Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the lawn mower. DRIVE CONTROL , Self-propelling is controlled by holding the operator presence control bar down to the handle and pulling the drive control lever rearward to the handle. The farther toward the handle the lever is pulled, the faster the unit will travel. * Forward motion will stop when either the operator presence control bar or drive control lever are released. To stop forward motion without stopping engine, release only the drive control lever. Hold operator presence control bar down against handle to continue mowing without self-propelling. NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels. Both front wheels are adjusted by a single lever on the left front wheel. Likewise, both rear wheels are adjusted by a single lever on the left rear wheel. ° Pull adjuster lever toward wheel. To raise mower, move lever forward to desired position. To lower mower, move the lever backward to desired position. Be sure to adjust both front and rear wheels to the same height. Height LEVER BACKWARD TO LOWER MOWER LEVER FORWARD TO RAISE MOWER TO CONVERT TO ENGAGE DRIVE CONTROL MOWER Your lawn mower was shipped ready to be used as a mulcher. To convert to rear bagging or side discharging: _=ratorpresence control bar Adjustrner_t button (or_ ur_dersfde) usterlever REAR BAGGING • Remove knob securing mulcher door to lawn mower housing. ° Open mulcher door and insert tabs of discharge chute into hinge bracket opening and position rear of chute over threaded stud. Drive control lever DRIVE CONTROL DISENGAGED 8 Hfr_ge bracket SIDE DISCHARGING ° Grass catcher and discharge chute must be removed. ° Open mulcher door and install front of side discharge deflector beneath door and position rear over threaded stud. ° Secure rear of side discharge deflector to lawn mower housing with knob. ° Mower is now ready for side discharging operation. ° To convert to mulching operation, side discharge deflector must be removed and mulcher door secured to mower housing with knob. ° To convert to rear bagging operation, side discharge deflector must be removed; discharge chute and grass catcher installed and discharge chute secured to mower housing with knob. Muloher door ° Secure rear of discharge chute to lawn mower housing with knob. ° Place rear handle of grass catcher on the crossbar of the lawn mower's lower handle as shown. ° Lift the round door of the discharge chute and place the grass catcher into place on the discharge chute. NOTE: Be sure round door of discharge chute rests on grass catcher as shown. ° Mower is now ready for rear bagging operation. ° To convert to mulching operation, remove grass catcher and discharge chute. Secure mulcher door to mower housing with knob. ° To convert to side discharging operation, remove grass catcher and discharge chute. Install side discharge deflector and secure it to lawn mower housing with knob. \ Mu]cDer door K_ob eaded stud Side discharge deflector \ \ Grass door chute Mu]cher door 9 SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR LAWN MOWER FOR MULCHING 1. Grass catcher, discharge chute and side discharge deflector removed. 2. Mulcher door secured to mower housing with knob. FOR REAR BAGGING 1. Side discharge deflector removed. 2. Grass catcher and discharge chute installed with discharge chute secured to lawn mower housing with knob. 3. Round door of discharge chute resting on top of grass catcher. FOR SIDE DISCHARGING 1. Grass catcher and discharge chute removed. 2. Side discharge deflector installed and secured to mower housing with knob. • I_CAUTION: Do not run your lawn mower without mulcher door closed; side discharge deflector installed, or discharge chute and approved grass catcher in place. Never attempt to operate the lawn mower with mulcher door or round door removed or propped open. TO EMPTY GRASS CATCHER 1. Open round door of discharge chute to move starter rope out and away from grass catcher. \ \ Front OPEN Routed door Starter rope 2. Remove grass catcher with clippings from lawn mower using both front and rear handles. 3. Empty clippings from grass catcher using both rear handle and strap. The weight of the grass will open the door. 4. Snap door shut over frame before installing grass catcher on mower. NOTE: Do not drag the grass catcher when emptying; it will cause unnecessary wear. A CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup. 1. Be sure lawnmower is level. 2. Remove oil dipstick from oil fill spout. 3. You receive a container of oil with the unit. Slowly pour the entire container down the oil fill spout into the engine. 4. Insert and tighten dipstick. IMPORTANT: * Check oil level before each use. Add oil if needed. Fill to full line on dipstick. . Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. See "TO CHANGE ENGINE OIE' in the Maintenance section of this manual. ADD GASOLINE * Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. A CAUTION: Wipe off any spilled oil or fuel, Do not store, spill or use gasoline near an open flame. CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. F_r_t Er_gine oil cap BEFORE STARTING ENGINE ADD OIL Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual. Gasoline filler cap 10 MULCHING TO STOP ENGINE * To stop engine, release operator presence control bar. TO START MOWING TIPS IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. See "CLEANING" in the Maintenance section of this manual. ENGINE NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial use of the product and should be considered normal. 1. To start a cold engine, push primer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes. 2. Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back. NOTE: In cooler weather it may be necessary to repeat priming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps. * The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades. * Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early afternoon. At this time the grass has dried, yet the newly cut area will not be exposed to direct sunlight. * For best results, adjust the lawn mower cutting height so that the lawn mower cuts off only the top one-third of the grass blades. If the lawn is overgrown it will be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of mulched grass. For extremely heavy grass, reduce your width of cut by overlapping previously cut path and mow slowly. MOWING TIPS • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time. • For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow slowly. • For better grass bagging and most cutting conditions, the engine speed should be set in the FAST position. • Pores in cloth grass catchers can become filled with dirt and dust with use and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using. • Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life. • Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across (perpendicular) to the first cut path. • Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn. 11 MAINTENANCE SCHEDULE BEFORE EACH USE Check for Loose Fasteners Clean / Inspect Grass Catcher * CheckTires Check Drive Wheels *** Clean Lawn Mower .... M Clean under Drive Cover *** O Check Drive Belt/Pulleys AFTER EACH EVERY 10 EVERY 25 HOURS EVERY 100 BEFORE USE HOURS ORSEASO. HOURS STORAGE ,, r, i/ i/ i/ *** Check / Sharpen / Replace Blade Lubrication Clean and Recharge Ba[tery ** V Check Engine Oil level Change Engine Oil Clean Air Filter t_,2 Inspect Muffler Replace Spark Plug E Replace Air Filter Paper Cartridge Empty fuel system or add Stabilizer * ** *** **** (if so equipped) Electric-Start mowers Power-Propelled mowers Use a scraper to clean under deck GENERAL 1 2 3 4 5 V - Change more often if operating under a heavy load or in high outdoortemperatures. - Service more often if operatingin dirty or dusty conditions. - Replace blades more often when mowing in sandy soil. - Charge 48 hours at end of season. - And after each 5 hours of use. RECOMMENDATIONS LUBRICATION CHART The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual. ine oil Some adjustments will need to be made periodically to properly maintain your unit. At least once a season, check to see if you should make any of the adiustments described in the Service and Adiustments section of this manual. ° At least once a year, replace the spark plug, clean or replace air filter element and check blade for wear. A new spark plug and clean/new air filter element assure proper air-fuel mixture and help your engine run better and last longer. ° Follow the maintenance schedule in this manual. BEFORE * Check ° Check EACH USE engine oil level. for loose fasteners. LU BRICATION Keep unit well lubricated (See "LUBRICATION CHART'). 0._ Mu]oher door hinge pin 0._ Handle bracket rnour_tfr_g pfr_s Spra,y lubricant ___See ENGINE in Maintenance section. IMPORTANT: Do not oil or grease plastic wheel bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating bearings. Ifyou feel they must be lubricated, use only a dry, powdered 1 2graphite type lubricant sparingly. Traflin LAWN MOWER Always observe safety rules when performing any maintenance. TIRES * Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. . Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. DRIVE WHEELS Check rear drive wheels each time you mow to be sure they move freely. The wheels not turning freely means trash, grass cuttings, etc., may be inside the drive wheel and dust cover area and must be cleaned out to free drive wheels. BLADE CARE For best results, mower blade must be kept sharp. Replace bent or damaged blades. TO REMOVE Blade adapter Lock_asher Blade Blade bolt TO SHARPEN BLADE NOTE: We do not recommend sharpening the blade - but if you do, be sure the blade is balanced. Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine. • The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower. • To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced. GRASS CATCHER BLADE 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. 2. Turn lawn mower on its side. Make sure air filter and carburetor are up. 3. Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. 4. Remove blade bolt by turning counterclockwise. 5. Remove blade and attaching hardware (bolt, lock washer and hardened washer). TO REPLACE Hardened washer o o BLADE 1. Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter. 2. Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine. 3. Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft. 4. Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise. • The recommended tightening torque is 35-40 ft. Ibs. IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual. The grass catcher may be hosed with water, but must be dry when used. Check your grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, replace only with approved replacement catcher shown in the Repair Parts section of this manual. Give the lawn mower model number when ordering. ENGINE LUBRICATION Use only high quality detergent oil rated with API service classification SF-SJ, Select the oil's SAE viscosity grade according expected operating temperature. 13 to your AIR FILTER NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation or at least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter cartridge every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions. TO CLEAN AIR FILTER 1. Loosen screw and tilt cover to remove. 2. Carefully remove cartridge. 3. Clean by gently tapping on a flat surface. If very dirty, replace cartridge. _I,CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge. 4. Install cartridge, then replace cover making sure the tabs are aligned with the slots in the back plate. Fasten screw securely. TO CHANGE ENGINE OIL NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty, 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug, 2. Remove engine oil cap; lay aside on a clean surface, 3. Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine. Back Cover Cover tabs MUFFLER Inspect and replace corroded muffler as it could create a fire hazard and/or damage. SPARK PLUG Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the "PRODUCT SPECIFICATIONS" section of this manual. 4. Wipe off any spilled oil from lawn mower or side of engine. 5. Slowly pour oil down the oil fill spout, stopping every few ounces to check the oil level with the dipstick. 6. Stop adding oil when you reach the FULL mark on the dipstick. Wait a minute to allow oil to settle. 7. Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfill, or engine will smoke heavily from the muffler on startup. 8. Always be sure to retighten oil dipstick before starting engine. 9. Reconnect spark plug wire to spark plug. CLEANING IMPORTANT: For best performance, keep mower housing free of built-grass and trash. Clean the underside of your mower after each use. /I, CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. * Clean the underside of your lawn mower by scraping to remove build-up of grass and trash. 14 ° Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life. ° Keep finished surfaces and wheels free of all gasoline, oil, etc. ° We do not recommend using a garden hose to clean lawn mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortened engine life. CLEAN UNDER DRIVE COVER Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any build-up of trash or grass on underside of drive cover. _i, WARNING: To avoid serious injury,before performing any service and adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 3. Remove drive cable from anchor, then detach the drive cable spring from the idler arm assembly (See Figure B). Idler arm assembly_ Drive cable anchor Drive belt LAWN MOWER TO ADJUST CUTTING HEIGHT See '%0 ADJUST CUTTING HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If deflector becomes damaged, it should be replaced. TO REMOVE DRIVE BELT 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug, 2. Remove screws retaining drive cover and remove drive cover from lawn mower housing (See Figure A). pulley \ Housing \ hole Belt keeper Figure B 4. Pivot idler arm assembly to slacken drive belt, then remove drive belt from drive pulley, belt keepers and idler arm. 5. Turn lawn mower on its side. Make sure air filter and carburetor are up. 6. Remove screw securing debris shield. Note that the debris shield has a tab which fits into a gap in the housing (See Figure C). Crar_kshaft Tab Housing hole Blade adapter (pulley er_d) Lawn mower" housfr_g Drive COVer Blade bolt Lc.ck-washer Trailing edge Figure A 15 Figure C 7. Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. 8. Remove blade bolt. 9. Remove blade, attaching hardware (bolt, lock washer and hardened washer), blade adapter and debris shield as one assembly. 10. Remove drive belt from blade adapter and debris shield; discard old belt. TO REPLACE DRIVE BELT Place new drive belt in the belt retainer of the debris shield. Be sure to route belt between belt keepers and through slot (See Figure D). . Tab Belt Drive belt Be sure belt is inside of belt keepers (See Figure B). NOTE" Pulling on the drive belt (to install it on the drive pulley) will cause the other end of the belt to free itself from the debris shield retainer and properly seat itself in groove of pulley end of the blade adapter. 10. Reattach drive cable spring to the idler arm assembly, then reattach drive cable to anchor. 11. Reattach drive cover with screws previously removed. 12.Connect spark plug wire to spark plug. TO ADJUST HANDLE The handle on your lawn mower has multiple height positions - adjust to height that suits you. 1. Remove knob and carriage bolt on left side of the lower handle. 2. While holding handle assembly, remove knob and carriage bolt from right side. Align hole in handle with desired hole in handle bracket, then reassemble bolt and knob and tighten securely. 3. Align left side of handle with same positioning hole as right side and secure with bolt and knob. Bolt Slot Debris shield Figure D 2. Route the other end of the new drive belt through hole in housing. 3. Reattach debris shield to housing with screw previously removed. Be sure tab of debris shield is in gap of housing. 4. Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter. 5. Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine (See Figure C). 6. Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft. 7. Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise. • The recommended tightening torque is 35-40 ft. Ibs. IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual. 8. Return mower to upright position. 9. Install new drive belt into idler arm assembly, then around the drive pulley. 16 Handle ENGINE ENGINE SPEED Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that engine is running too fast or too slow, take your mower to a Sears or other qualified service center for repair and adjustment. CARBURETOR for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governed high speed needs adjusting, contact a Sears or other qualified service center, which has proper equipment and experience to make any necessary adjustments. Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, which is factory set Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. IMPORTANT: When folding the handle for storage or transportation, be sure to fold it as shown or you may damage the control cables. LAWN MOWER When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire lawn mower (See "CLEANING" in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. 4. Touch up all rusted or chipped paint surfaces. Be sure to sand surface lightly before painting. HANDLE You can fold your lawn mower handle for storage. NOTE: The upper handle has an "antifold" bracket located on the left side of the handle. This bracket prevents the upper handle from folding forward, which helps protect control cable(s) from damage. 1. Loosen the two (2) handle knobs on sides of the upper handle and allow handle to fold down to the rear. 2. Remove the two (2) handle knobs and carriage bolts on sides of the lower handle and pivot entire handle assembly forward and allow it to rest on mower. 3. Reinstall knobs and carriage bolts to lower handle or handle brackets for safe keeping. • When setting up your handle from the storage position, you must manually lock lower handle into mowing position. Operator presence control bar Lower Mowing positio_ 3olt K_ob\\ Handle' bracket 17 ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). CYLINDER ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. * Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty. * Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. * Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer. 1. Remove spark plug. 2. Pour one ounce (29 ml) of oil through spark plug hole into cylinder. 3. Pull starter handle slowly a few times to distribute oil. 4. Replace with new spark plug. OTHER * Do not store gasoline from one season to another. * Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. * If possible, store your unit indoors and cover it to protect it from dust and dirt. * Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust. IMPORTANT: Never cover mower while engine and exhaust areas are still warm. _I,CAUTION: Never store the lawn mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. TROUBLESHOOTING - See appropriate to a Sears Service Center, PROBLEM Does not start section in manual unless directed CAUSE CORRECTION 1. Dirty air filter. 2. Out of fuel. 3. Stale fuel. Clean/replace air filter. 2. Fill fuel tank. 3. Empty fuel tank and refill tank with fresh, clean gasoline. 4. Empty fuel tank and refill tank with fresh, clean gasoline. 5. Connect wire to plug. . 4. Water in fuel. 5. Spark plug wire is disconnected. 6. 7. Bad spark plug. Loose blade or broken blade adapter. 8. Control bar in released position. 9. Control bar defective. 10. Fuel valve lever (if so equipped) in OFF position. 11. Weak battery (if equipped). 12, Disconnected battery connector (if equipped). 18 6. Replace spark plug. 7. Tighten blade bolt or replace blade adapter. 8. Depress control bar to handle. 9. Replace control bar. 10. Turn fuel valve lever to the ON position. 11. Charge battery. 12. Connect battery to engine. TROUBLESHOOTING to a Sears Service - See appropriate PROBLEM Loss of power Poor cut - section in manual unless directed Center, CAUSE CORRECTION 1, Rear of mower housing or blade dragging in grass. 2. Cutting too much grass. 3. Dirtyair filter. 4. Buildup of grass, leaves, and trash under mower. 5. Too much oil in engine. 6. Walking speed too fast. 1. Worn, bent or loose blade. uneven 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower. Excessive vibration 1. Worn, bent or loose blade. 2. Bent engine crankshaft. Starter rope hard to pull 1. Engine flywheel brake is on when control bar is released. 2. Bent engine crankshaft. 3. Blade adapter broken. 4. Blade dragging in grass. • Raise cutting height. 2, Raise cutting height. 3, Clean/replace air filter. 4, Clean underside of mower housing. Check oil level. 6, Cut at slower walking speed. • 1. Replace blade. Tighten blade bolt. 2. Set all wheels at same height. 3. Clean underside of mower housing. 1. Replace blade. Tighten blade bolt. 2. Contact a Sears or other qualified service center. 1. Depress control bar to upper handle before pulling the starter rope. 2. Contact a Sears or other qualified service center. 3. Replace blade adapter. 4. Move lawn mower to cut grass or to hard surface. Grass catcher not filling (If so equipped) 1. Cutting height too low. 2. Lift on blade worn off. 3. Catcher not venting air. Raise cutting height. Replace blade. 3. Clean grass catcher. Ha_ to push 1. Grass is too high or wheel height is too low. 2. Rear of mower housing or blade dragging in grass. 3. Grass catcher too full. 4. Handle height position not right for you. 1. Raise cutting height• Loss of drive or slowing of drive speed 1. 2. 3. 4. Belt wear. Belt off of pulley. Drive cable worn or broken. "Loose" drive control system. 19 2. Raise rear of mower housing one (1) setting higher. 3. Empty grass catcher. 4. Adjust handle height to suit. .• 3. 4. Check/replace Check/reinstall drive drive belt. belt. Replace drive cable. Adjust drive control. Ga_ntia ......................................................... 20 Reglas de Segurldad ................................ 20-22 Montaje / Pre-Operacibr_ .......................... 23-24 Operacibr_ ................................................. 25-29 Mantenimierlo .......................................... 30-33 Programa de Mantenimierlo ......................... 31 Especificacior_es del Producto ....................... 22 Servicio y Adjustes ................................... 33-35 Almacenamler_to ....................................... 35-36 Iderllflcacl6n de problemas ...................... 36-37 Partes de repuesto .................................. 38-47 Servlclo Sears .................................. Contratapa GARANT[A LIMITADA DE DOS AhlOS PARA LA SEGADORA A MOTOR CRAFTSMAN Pot dos (2) aSos, a partfr de la fecha de compra, cuar_do esta Segadora Craftsman se mantenga, lubfique y afine seg_n las fr_struccior_es para la operacf6n y el manter_fmierlo en el mar_ual del dueSo, Sears reparar_ gratfs todo defecto er_ el material y la mano de obra. Si la Segadora Craftsman se usa para fines comerciales o de arrier_do, esta garantia s61o se aplica pot r_oventa (90) dias a partfr de la fecha de compra. Esta Gararlia no cubrs: ° Articu]os que se desgastar_ durante el uso normal tales como las cuchil]as segadoras rotatorias, los adaptadorss de la cuchf]la, las oorreas, los filtros de airs y las bujias. ° Reparacior_es r_ecesafias debfdo al abuso o a la r_eglfger_cfadel operador, fncluyer_dose a los cig_eSales doblados y a la falta de mantenimiento del equipo seg_n las fr_struccior_es que se ir_cluyer_er_ el manual del dueSo. El serviclo de garantia esta disponible al devolver la segadora a motor Craftsman al Cerlro de Servicfo Sears mas cercano er_ los Estados Urtdos. Esta garar_t°a se aplica solamente mierlras producto este en uso en los Estados Ur_fdos. el Esta Gararlia le otorga derschos legales especfffcos, y puede que tambi_n tenga otros derschos que var°ar_ de estado a estado. Sears, Roebuck and Co., D/817WA, Hoffman Estates, IL 60179 USA IMPORTANTE: Esta maquina cortadaora es capaz de amputar las manos y los manos y los pies y de lar_zar obietos. Sf no se observan las ir_struccior_es de seguridad sfguientes se pueden producir lesiones graves o la muerte. 4,Busque este sfmbolo que se_ala las precauclones de segurfdad de fmportancfa. Quiere declr - i iiATENCION!!! i iiESTE ALERTO!!! SU SEGURIDAD ESTA COMPROMETIDA. _,DVERTENCIA: Siempre desoonecte el alambrs de la bujfa y pbr_galo dor_de r_opueda erlrar er_ cor_tacto con la bujfa, para evftar el arrar_que pot accidente, durarle la preparacibr% el transporte, el ajuste o cuando se hacen reparacfones. _ADVERTENCIA: Los bornes, terminales y accesorlos relativos de la bateria corllenen plomo o compuestos de plomo, productos qufmicos conocidos er_ el Estado de Califomfa como causa de c_ncer y defectos al nacfmfento u otros daSos reproductlvos. Lavar las manos despu_s de manipularlos. /[I, PRECAUCI()N: El tubo de escape del motor, algur_os de sus constituyerles y algur_os compor_entes del veh°culo contiener_ o desprsr_der_ productos qu°mfcos conocfdos er_ el Estado de Califomfa como causa de c_ncer y defectos al nacimiento u otros da_os reproductivos. _PRECAUCI()N: El sHenciador y otras pfezas del motor Ilegan a sre extrsmadamente calientes durante la operacibr_ y sfguen sier_do calientes despu_s de que el motor haya parado. Para evftar quemaduras severas, permar_ezca lejos de estas _treas. 2O I. OPERACION ° Antesdeempezar, debefami]iarizarsecompletamente con los controles y el uso correcto de la maquir_a. Para esto, debe leer y comprer_der todas las fnstrucciones que apa_cen er_la maqufna y er_ los manuales de operaoi6r_. ° No por_ga las matzos o los pies cerca o debaio de las partes rotatorias. Mar_t_r_gase siempre lejos de la abertura de la desoarga. • Permfta que solamente las personas responsables que est_n familiarfzadas con las ir_struocfonesoperen la m_quina. ° Despeie el _rea de obietos tales oomo piedras, iuguetes, alambres, huesos, palos, etc. que pueder_ set recogidos y lar_zados pot las ouchf]las. ° AsegO_se que el _rea r_ose haller_ personas, ar_tes de segar. Pare la m_tqufna si alguier_ er_tra er_ el _a. ° No ope_ la maquir_a sin zapatos o con sar_dalias abiertas. Pbngase siempre zapatos s61idos. ° No tf_ de la segadora haoia atr_ts a menos que sea absolutamente necesario. Mire siempre haofa abajo y haoia detrlis antes y mfentras que se mueve hacfa atrlis. ° No opere la segadora sin los _speotivos resguardos, las placas, el reoogedor de o_sped u otros adftamentos dise ados para su protecci6n y seguridad. • Refi_rase alas fnstruccfones del fabricar_te para el fur_cionamfento e ir_stalaoibr_de accesorios. Use 0r_foamente accesorfos aprobados pot el fabricar_te. ° Deter_ga la ouohf]]a o las ouohillas ouando cruce pot calzadas, oalles o earnings de grava. ° Parar el motor cada vez que se abar_dona el aparato, antes de limpiar la segadora o de remover residuos del tubo. • Apagar el motor y esperar hasta que las ouchf]las est_r_ completamente paradas antes de remover el receptor de hferba. • Segar solamente con luz del d°a o cor_ urea buena luz artificial. • No opere la m_quir_a baio la irffluer_oiadel alcohol o de las drogas. • Nut, ca opere la maquina cuar_do la hierba est_ mojada. Aseg0rese sfempre de terser buena traccibr_ er_ sus pies; mantenga el rear,go firmemer_te y oamine; r_ur_cacorra. • Desoor_ectar el mecanismo de propulsl6n aut6r_oma o el embrague de trar_smfsf6nen las segadoras que 1otier_en antes de por_er en marcha el motor. = Si el equipo empezara a vibrar de una rear,era anormal, pare el motor y revise de ir_medfato para averfguar la causa. Generalmer_te la vibracf6n suele indfcar que exfste algur_a averia. • Sfemp_ use gafas de segurfdad o ar_teojos con proteccfbr_ lateral ouar_do opere la segadora. II. OPERACION SOBRE LAS CUESTAS Los accfder_tes ocurren cor_m_s frecuenofa en las cuestas. Estos accfder_tes ccurrer_ debfdo a resbaladas o caidas, las cuales pueden resultar er_ graves lesior_es. Operar la recortadora er_ cuestas requiere mayor oonoer_traoibr_. Sf se sfente inseguro en urea ouesta, no la recorte. HACER: • Puede recortar a tray,s de la superficie de la cuesta, nunca haoia arriba y hacia abajo. Prcceda con extrema precauci6r_ cuando cambie de dfreccibr_ er_ las cuestas. ° Renueva todos los objetos extraSos, tales como gufiarros, ramas, etc. ° Debe prestar ater_cf6n a hoyos, bathes o protuberancfas. Recuerde que la hierba alta puede escor_der obst_cu]os. NO HACER: ° No recorte ceroa de per_dier_tes, zar_jas o terraplenes. El operador puede perder la traccibr_ er_ los pies o el equilfbrio. ° No recorte cuestas demasiado inclfnadas. ° No recorte en hferba mojada. La reduccf6n er_ la tracci6r_ de la pisada puede causar resbalones. III, Nli_lO$ Se pueder_ producfr accidentes tr_tgicos si el operador r_opresta ater_ci6r_ a la preser_cfa de los nffios. A mer_udo, los r_ffiosse sfenten atraidos pot la m_tquir_a y pot la actfvidad de la sfega. Nunca supor_ga que los r_iiiosvan a permar_ecer er_ el raising lugar donde los vfo pot dltima vez. • Mantenga a los nifios aleiados del _rea de la siega y baio el ouidado estrfcto de otra persor_a adulta respor_sable. • Est_ alerta y apague la m_tquir_a si hay niSos que er_trar_al _a. • Ar_tes y ouando este retrccedfendo, mire hacfa atr_ts y haoia abajo para veriffcar sf hay niSos pequeSos. ° Nunca permfta que los r_fiiosoperer_ la m_tquir_a. ° Ter_ga un cuidado extra cuar_do se aoerque a esquir_as donde no hay visfbilidad, a los arbustos, _rboles u otros obietos que pueden fnterferfr con su lir_ea de visibr_. 21 IV. SERVICIO ° Ter_ga cufdado extra al mar_eiar la gasolir_a y los demos combustibles. Son inflamables y los oases sor_ explosivos. - Use solamente ur_ envase aprobado. - Nut, ca remueva la tapa del depbsito de gasolfna o agregue combustible cor_ el motor funcionando. Permfta que el motor se enfr°e antes de volver a porte combustible. No fume. - Nut,ca vuelva a porter combustible en la m_tquina en recintos cerrados. - Nut, ca almaoer_e la m_quina o el envase del combustible dentro de alg0r_ lugar en donde haya urea llama expuesta, tal oomo la del oaler_tador de agua. Nunoa haga funcior_ar urea m_quir_a dentro de ur__trea cerrada. , Nunoa haga aiustes o reparacfones mier_tras el motor est_ en marcha. Desoonecte el cable de la buiia, y mar_t_r_galo a cierta distar_cfa de _sta para prever_ir ur_ arrar_que accidental. ° Mantenga las tuercas y los pernos, especfalmente los perr_os del accesorfo de la cuohilla, apretados y mar_ter_ga el equipo en buenas oondiofor_es. ° Nut,ca manipu]edeformair_debida los dfsposftfvos desegurfdad. Controleregularmeritssufur_cionamfento correcto. ° Mar_ter_ga la m_quinalibredehferba,hojas ° Los compor_entes del receptor de la hferba van sujetos a desgaste, da_os y deterioro, que pueden exporter las partes er_ movfmier_to o permitfr que objetos sean dfsparados. Controlar frecuer_temente y cuando sea necesario sustftuir cor_ partes acor_seiadas por el fabrfcante. ° Las cuchil]as de la segadora est_tr_aff]adas y pueder_ cortar. Cubrir las hoias o Ilevar guantes, y utflizar precaucfor_es especfales cuando se efect0a mar_ter_fmier_tosobre las mfsmas. • No oambie el ajuste del regulador del motor ni exoeda su velocfdad. u otras acumulaciones de desperdfcio. Lfmpie los derrames de acefte o combustfble. Permfta que la m_quir_a se enfr°e antes de almacenarla. • Pare e fr_speccior_e el equipo si le pega a un objeto. Rep_ralo, sf es r_ecesarfo, antes de hacerlo arrancar. • Er_ r_ir_g_r_ caso hay que regular la altura de las ruedas mfentras el motor ester en marcha. Nfimero de Serie: Fecha de Compra: Capacidad y Tipo de Gasolina: 1,6 Cuartos (Regular sin Plomo) Tipo de Aceite (API-SF-SJ): SAE 30 (Sobre 32°F); SAE 5W-30 (Debajo 32°F) Capacidad de Aceite: 20 Onzas Bujfa (Abertura: .030") Torsi6n del Perno de la Cuchilla: Champion RJ19LM o J19LM 35-40 ft. Ibs. El r_mero del nodelo y el de serie se er_cuer_trar_ en la calcomania adjur_taa la parts trasera de la caia de la segadora. Debe registrar tanto el r_mero de serie come la fecha de compra y mar_ter_galosen un lugar seguro para refer_ciaer_el futuro. Acuerdos de Protection Congratulaciones pot su buena compra. Su nuevo producto Craftsmar_® est_ dise_ado y fabrfcado para funcfonar de modo fiable pot muchos a_os. Pero como todos los productos, puede necesftar alguna reparaci6r_ de tar_to er_ tar_to. En este caso terser ur_ Acuerdo de Proteccf6n para la Reparaci6n puede hacerles ahorrar dinero y fastidios. para la Reparation ° Ayuda rdpida pot tel_fono - soporte telef6r_fco por parts de un t_cnfco Sears sobra productos que requierar_ ur_ arreglo en casa, y adem_ts urea programaci6r_ sobre los a reglos m_ts convenfer_tes. Cuando se ha comprado el Acuerdo, basta cor_ una l]amada telef6nfca para programar el servicio. Puede llamar cuando quiera, d°a y noche o ffjar en lir_ea una cfta para obter_er el servicfo. Sears tier_e m_ts de 12.000 especialistas profesior_ales en la reparacibr_, que tier_er_ acceso a m_ts de 4.5 mfllor_es de partes y accesorfos de calidad. Este es el tipo de profesior_alidad con que puede contar para ayudar a alargar la vfda del producto que acaba de comprar, por muchos a_os. iCompre boy su Acuerdo de Protecci6r_ para la Reparaci6r_! Se aplican algunas limitaciones y exolusiones. Para conocer los precios y tener m_s informacibn, Ilarne al 1-800-827-6655. Compre ahora un Acuerdo de Proteeci6n para la Fteparaci6n y prot_gese de molestias y gastos inesperados. Un Aouerdo ir_oluye los puntos sigufentes: • Servicio experto de nuestros 12.000 especialistas profesfor_ales er_ la reparacf6r_. • Servioio ilimitado sin cargo alguno para las partes y la mano de obra sobrs todas las reparacior_es garantfzadas. • Sustituci6n dsl producto si su producto garar_tfzado no puede ser arraglado. • Descuento del 10% sobre el precio corriente del servicio y de las partes relativas al servicio r_ocubiertas por el acuerdo; tambi_r_ el 10% metros sobre el pracio corrfente de un cor_trol de manter_fmier_to prever_tfvo. Servicio de Instalacion Sears Para la instalaciSn profesional Seam de aparatos de casa, puertas de garaje, calentadores de agua y otros fmportantes art°culos para la casa, en U.S.A. llamar a 1-800-4-MY-HOME@. 22 Estos accesorios estabar_ disponibles cuando se produjo la segadora. No son facilitados junto al cortacesped. Tarnbi_n est_n dfspor_ibles en la mayor°a de las tfendas de Sears y en los cenVos de servfcfo. Algunos de estos accesorios tal vez r_ose aplfquen a su segadora. RENDIMIENTO DE LA SEGADORA DE RECORTES PAPA SEGADORAS CON DESCARGA DESVIADOR TRASERA __ \\ \ \\\ _ , -- RECOREDOR PAPA \\ RECOREDOR PARA CON DESCARGA TRASERA SEGADORAS MANTENIMIENTO _ _ CON DESCARGA LATERAL SEGADORAS / DE LA SEGADORA SILENCIADORES CORREAS ESTABILIZADORES CUCHILLAS FILTROS DE AIRE ADAFI'A_RES DE CUCHILLA RUEDAS BUJ[AS ACEI_ DEL MOTOR PARA REMOVER LA SEGADORA DE LA CAJA DE CARTON 1. Remueva las partes sueltas que se ir_oluyer_ co_ la segadora. 2. Corte las dos esquir_as de los extremos de la oaja de cartbn y tfenda el parcel del exVemo piano. 3. Remueva todo el materfal de empaque, exoepto la cuSa er_tre el rear, go superior y _1 inferfor, y la cuSa que sujeta la barra de los cor_trol que exige la presencfa del operador jur_to oor_ el rear,go superfor. 4. Haga rodar la segadora hacia afuera de la oaja de oart6n y r'evisela cuidadosamer_te para verifioar si todav°a quedar_ partes sueltas adfcionales. Lea estas insVuccTones y este manual oompletamer_te antes de tratar de mor_tar u operar su segadora r_ueva. IMPORTANTE: Este cortao_sped vier_e SIN ACEITE O GASOLINA er_ el motor. Su segadora nueva ha sfdo mor_tada en la f_brica oor_ la exoepofbr_ de aquel]as partes que se dejaror_ sfr_ rnontar pot razones de env°o. Todas las partes oorno las tuercas, las arar_delas, los pernos, etc., que sor_ necesarias para completar el rnontaie hart sido colocadas er_ la bolsa de partes. Para asegurarse que su segadora funcione er_ forrna segura y adecuada, todas las partes y los art°culos de ferreteria que se mor_ter_tfenen que set apretados segurarnente. Use las herramfentas correctas, corno sea neoesario, para asegurar que se aprfeter_ adecuadamer_te. 23 PARA MONTAR EL RECOGEDOR DE CESPED 1. Deslfzar el saeo de la hierba sobre el armaz6n. Asegurarse de que el mango trasero est_ arriba (el mismo lade que el mango delantero) y la abrazadera abajo. 2. Deslfce los sujetadores de vfnflo sobre el bastfdor. AVlSO: Si los sujetadores de vfnilo est_tn muy duros, m_talos en agua ealiente per algunos minutes. Sf se moja la bolsa, d_jela que se seque antes de usarla. 3. Cerrar la puerta del depbsito de hferba. AMISO: Cuando est_ completamente eerrada, la puerta se cerrar_ con un dfsparo sobre el armazbn y los elementos de fiiaefbn en vinflo. COMO PREPARAR SU SEGADORA PARA DESDOBLAR EL MANGO IMPORTANTE: Desplfegue el mango con touche cuidado para no pellizear o dariar los cables de control. 1. Levante la secci6n del mango fnferior hasta la posicibn de operacf6n y alinee el aguiero en _ste con uno de los agujeros para determfnar la altura en el puntal del mango. 2. Inserte el pemo del mango a tray,s de _ste y del puntal y aseg0relo con la manflla. 3. Repfta el procedimfento para el lade opuesto del mango. 4. Levante la secci6n del mango superfor hasta la posfci6n de operacibn, remueva la curia protectora y apriete las manfllas del mango en forma segura. 5. Remueva el materfal de empaque de alrededor de la barra de control. El mango de la segadora puede aiustarse seg0n le acomode para segar. Refi_rase a "AJUSTE DEL MANGO" en la seccibn de Servicfo y Ajustes de este manual. _arra de control ¢ /, /_ Mango posterior / Correa la presenoia del operador Mango superior Mango Inferior LEVANYAR Posici6n para segar El bastidor del _ :_, \ / Sujetadores de vinilo Manilla f. • S / \ \ \ / \ / Soporte de mango PARA INSTALAR LOS ACCESORIOS Su segadora fue envfada lista para usarse come una aeolchadora de eapa vegetal. Para convertirla de mode que pueda ensaear o desearga, refi_rase a "PAFtA CONVEFtlR LA SEGADORA" en la seccibn de Operacibn de este manual. 24 FAMILIARICESECON SU SEGADORA LEAESTEMANUAL DEL DUENOY LAS REGLAS DE SEGURIDAD ANTES DE OPARAR SU SEGADORA. Compare las ilustracfones con su segadora para famf]iarfzarse con la ubfoaci6n de los diversos ¢ontroles y ajustes. Guarde este manual para referencfa en el futuro. Estos simbolos pueden apareser sobre su segadora o en la literatura proporoionada producto. Aprenda y comprenda sus significados. A'n'ENCI6N O MOTOR MOTOR ADVERTENCIA ENCENDIDO APAGADO RAPIDO LENTO ESTRANGU LACION con el COMACEITE PELIGRO, GUARDE LAS BUSTIBLE MANOS Y LOS PIES LEJO8 Barra de control que exige la presencia del operador Palanca de control de la impulsfbn Cordbn mango Tapa del deposito de aciete del motor con varf]la indfcadora de nfvel Recogedor Silenciador Mango del _ustador de un duel punto Tapa del deposito de la gasolina Filtro de airs Puerta de la acolchadora Cebador IMPORTANTE: CUMPLE CON I_as segadoras los est_ndarss Product Safety Caja Este cortao_sped viene SIN ACEITE O GASOLINA en motor. LOS REQUISITOS DE SEGURIDAD DE LA CPSC a motor, que se oonducen desde la parte de atr_is, rotatorias, Sears, oumplen con de segurfdad del Amerfcan National Standards Institute y de la U.S. Consumer Commfssfon. 1_8ouohflla gfra cuando el motor est_ funoionando. Cebador - bombea combustfble adicional desde el carburador al cilfndro para uso ouando se necesfta hater arrancar un motor fr°o. Palanoa de control de la impulsion - se usa para enganchar la segadora para movfmfento hacia adelante fmpu]sada a motor. Mango del ajustador de un dual punto-se usa para ajustar la altura de corte de la segadora. Barra de control que exige la presencia del operador - tiene que sujetarse abajo, junto con el mango, para hacer arrancar el motor. Su_ltela para parar el motor. Cordbn arraneador - se usa para hacer arrancar el motor. Puerta de la acolchadora - permfte la conversi6n para la operacf6n de descarga o ensacado. 25 La operacibr_ de cualquier segadora puede hacer que salten obietos extrafios dentro de sus gigs, 1oque puede produclr daSos graves er_ _stos. Siempre use ar_teojos de segurfdad o proteccfbn para los ojos mier_tras opere su segadora o ouar_do haga aiustes o reparacfones. Reoomer_damos gafas o una mascara de seguridad de visfbn amplfa de seguridad usada sobre las gafas. COMO USAR SU SEGADORA VELOCIDAD DEL MOTOR La velocldad del motor se establecl6 er_ la f_brioa para ur_ rendimfento 6ptfmo. La velooidad no se puede ajustar. dI_NTROL DE ZONA DEL MOTOR PRECAUCION: Las regulaoior_es federales exiger_ que se fr_stale un control para el motor er_esta segadora para reducfr a ur_ mir_fmo el riesgo de lesfor_arse debfdo al cor_tacto con la cucDilla. Pot r_ir_g0r_ motfvo trate de elfminar la funci6r_ del control del operador. La cuchilla gira cuar_do el motor est_ fur_cfonar_do. ° Su segadora vier_e equipada con una barra de oontroles que exigen la preser_cfa del operador, 1oque requiere que el operador est_ detr_ts del mango de la segadora para hacerla arranoar y operarla. CONTROL DE LA IMPULSK)N • 1_8autopropulsibr_ se ¢or_trola mar_tenier_do la palar_ca de mando operador presente abajo haoia el mango y tirar_do la palar_ca de accionamfento atr_is haoia el mango. Cuar_to m_ts lejos se tira la palar_ca hacfa el rear,go, m_ts r_tpfda ir_tla unidad. • El movfmfer_to hacfa adelar_te se detfene ouando sea la palanoa de mando operador presente o la palanca de acoior_amfento se sueltar_. Para detener el movlmier_to Daoia adelar_te sir_ apagar el motor, soltar s61o la palar_ca de accior_amfento. Manter_er la palar_oa de mando operador preser_te abajo contra el mango para cor_tfnuar a cortar sir_ autopropu]sibr_. AVIS0: Sf despu_s Daber deser_ganchado de la palanca de control, la segadora no roda hacfa atr_ts, empuie la segadora un poco hacfa adelar_te para deser_gar_char las ruedas de la fmpulsf6n. ° Para rear,terser el mando cor_ectado cuando seda la vuelta a una esquir_a, empujar el rear,go para levar_tar las ruedas delanteras del terrer_o mientras se gira la cortadora. Barrs. de control que _(i_ PARA )resencia AJUSTE DEL MANDO Ocasfonalmer_te, el sistema de rear, do puede "aflojarse _, provocando urea dfsmfnuci6n de la velocfdad. Hay un bot6r_ er_ la parte trasera de la sede del mando para apretar la tensfbr_ del cable. Proceder de la siguiente manera: 1. Apagar la motor y desconectar el cable de bujia de la buj°a. 2. Tfrar el botbr_ er_ la parte lrfferior del mando de trar_smisfbn, luego empuiarlo otra vez. 3. Opere la segadora para versi la velocidad del meca_ismo ha aumentado. Sf no hay aume_to, sfgniffca que es necesario sustituir la correa de tra_smisf6n. PARA AJUSTAR LA ALTURA DE CORTE Las dos ruedas delanteras se aiustar_a tray,s de una Or_icapalar_ca en la rueda delantera fzquferda. Asfmfsmo, las dos ruedas traseras se ajustan a trav_s de una 6nica palar_ca er_la rueda trasera izquferda. • Tire de la palanc_ de aiustes Dacia la rueda. Levante la segadora, mueva la palar_cahasta delante a la posicfbndeseada. Para bajar la segadora, mueva la palanca hacia la retaguardfa. Asegura_e de que las dos ruedas delanteras y traseras est_r_ regu]adas a la mfsma altura. PALANCA HAC/A AYR,&S PARA EfAJAR EL CORTACISSPED /Ql ]l '_' PALANCA HACIA ADELANTE PARA LEVANTAR EL CORTACESPED PARA CONVERTIR LA SEGADORA Su segadora fue envlada lista para usarse como aoolohadora de capa vegetal. Para convertirla a urea operaci6n de er_sacado posterior o de descargar lateral: SEGADORAS CON DESCARGA TRASERA ° Quitar el pomo que ffia la puerta del aoabador al bastidor del oortac_sped. • Abrfr la puerta del acabador e fr_troducfr las lengOetas del tubo de descarga en la apertura de la brida de la artfculaof6r_ y colocar la parte trasera del tubo sobre el pasador roscado. Leng0etas del tubo de descarg8 del opers.dor Control la impulsi6_ CONTROL DE LA IMPULSION CONTROL DE LA DESENGANCHADO IMPULSION E_ot6najus_e ENGANCHAR EL (en 18.parte trs.sers.) _ 26Soporte de 8.rticulacion f Puert8 de 188colohsdor8 ° Fiiar la parte trasera del canal de desoarga al bastidor del cortao_sped a tray,s del pomo. • Colooar el mango trasero del dep6sfto de hferba en la alzaprima del mango fnferfor del oortac_sped como mostrado. • Alzar la puerta redonda del canal de eyecoibn y colocar el dep6sfto de hferba en el canal de eyeccf6n. AVlSO: Asegurarse de que la puerta redonda del canal de eyeccf6n se apoye en el dep6sito de hierba como mostrado. ° Ahora el cortao_sped est_ listo para la operacf6n de ensaoado trasero. • Para oonvertir en la operaoibn de aoabado. quftar el dep6sfto de hierba y el canal de eyeocf6n. Fiiar la puerta del aoabador al bastidor del cortao_sped a tray,s del pomo. • Para oonvertir en la operaoi6n de desoarga. quftar el dep6sfto de hierba y el canal de eyeocf6n. Instalar el deflector de desoarga lateral y fijarlo al bastfdor del cortacesped a tray,s del pomo. • Fljar la parte trasera del deflector de descarga lateral al bastldor del oortac_sped a tray,s del pomo. • Ahora el cortac_sped est,, Ifsto para la operaci6n de descarga. • Para oonvertfr a laoperaci6n de aoabado. hay que quitar el deflector de descarga lateral y fljar la puerta del acabador al bastidor del cortac_sped a tray,s del pomo. • Para oonvertfr en la operacfbn de ensacado trasero, hay que quitar el deflector de descarga lateral; instalar el canal de eyeccibn y el dep6sito de hierba y friar el canal de descarga al bastfdor del cortac_sped a tray,s del pomo. Puerta de la. del ma.ngo inferior El recogedor la descarga PASOS SIMPLES DE RECORDAR CUANDO CONVIERTA SU SEGADORA PAPA ACOLCHAMIENTO redonda. Ca.nal inclinado de la.descarga. 1. El dep6slto de hierba, el canal de eyeccl6n y el deflector de descarga lateral quitados. 2. La puerta del acabador ffiada al bastfdor del cortac_sped a tray,s del pomo. PAPA ENSACAMIENTO TRASERO - Ma.nilla 1. Deflector de descarga lateral quitado. 2. El dep6slto de hierba y el canal de eyeccl6n instalados con el canal de eyeccf6n ffjado al bastfdor del cortao_sped a tray,s del pomo. 3. La puerta redonda del canal de desoarga apoyada sobre la parte superior del dep6sito de hierba. PAPA DESCARGA LATERAL- Pasa.dor rosca.do SEGADORAS CON DESCARGA 1. El dep6sfto de hierba y el canal de eyeccf6n quitados. 2. El deflector de descarga lateral fnstalados y fijados al bastfdor del cortao_sped a tray,s del pomo. PRECAUCI()N: No haga funclonar su segadora sfn la puerta trasera se cerr6, desviador de la desoarga instalada, o sin el canal fnclinado de la descarga o el recogedor c_sped aprobados en su lugar. Nunca trate de operar la segadora cuando se ha removido a puerta trasera o puerta redonda cuando est_ un pc,co abierta. LATERAL ° Hay que quitar el dep6sfto de hferba y el canal de eyeccf6n. ° Abrir la puerta de la puerta del acabador e instalar la parte delantera del deflector de descarga lateral debajo la puerta y colocar el parte trasero en la esp_trrago ff]eteado. 27 PARA VACIAR EL RECOGEDOR DE ClaSPED 1. Abierto la puerta redonda del canal inclinado de la descarga para mover la cuerda del arrancador hacia fuera y leios des de el recogedor de cesped. \k ANTES DE HACER ARRANCAR EL MOTOR AGREGUE ACEITE Su segadora fue envfada sfn aceite en el motor. Para el tipo y el grado del aceite a utflizar, vea el "MOTOR _en la seccibn del Mantenimfento de este manual. _PRECAUCI(_N: NO sobrellene el motor con Mango ABIERTO Puerta redonda aceite, o fumar_, pesa demante del sflencfador cuando Io valla a arrancar. Cuerda del arrancador 2. Remueva el recogedor de cesped, con los recortes, de la segadora usando tanto el mango anterfor como _1 mango posterfor. 3. Vac°e los recortes de el recogedor de c_sped usando tanto el mango posterior como _1correa. El peso de la hierba abrfr_ la puerta. 4. Cerrar fuerte la puerta en el armaz6n antes de instalar de depbsfto de hferba en el cortacesped. AVISO: No arrastre la bolsa cuando la vac°e; se producir_t un desgaste innecesarfo. Mango posterior Correa H _j Mango 28 1. Aseg_rese que la segadora est_ nfvelada. 2. Remueva la varila medfdora de acefte del tubo de desarga de acefte. 3. Usted recfbe un envase de aceite con la unfdad. Vierta lentamente el envase entero de acefte en el tubo de relleno del motor. 4. Inserte y apriete la varilla medidora de acefte. IMPORTANTE: ° Revise el nfvel del acefte antes de cada uso. Agregue acefte sf es necesarfo. Llene hasta la lfnea de l]eno en la varf]la medfdora de nivel. ° Cambfe el acefte despu_s de 25 horas de operaci6n o una vez pot temporada. Puede necesftar cambiar el acefte m_ts a menudo cuando las condfcfones son polvorosas o sucfas. Vea "PARA CAMBIAR EL ACEITE DEL MOTOR" en la seccfon de Mantenimfento de este manual. AGREGUE GASOLINA ° Llene el estanque de combustfble hasta la parte inferfor del cuel]o de relieno del estanque de gasolfna. No 1olJene demasiado. Use gasolina regular, sin plomo, nueva y limpia con el minfmo de 87 octanos. No mezcle el acefte con la gasolina. Para asegurar que la gasolina utilfzada sea fresca compre estanques los cuales puedan set utilizados durante los p rfmeros 30 dfas. _I=PRECAUCION: Limpfe el acefte o el combustfble derramado. No almacene, derrame o use gasolina cerca de una llama expuesta. • I=PRECAUCI6N: Los combustfbles mezclados con alcohol (conocfdos como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, la que conduce a la separacf6n y formacf6n de _cidos durante el almacenamiento. La gasolfna ac°dica puede dariar el sfstema del combustible de un motor durante el almacenamiento. Para evftar los problemas con el motor, se debe vacfar el sistema del combustfble antes de guardarlo pot un periodo de 30 dfas o m_s. Vacie el estanque del combustfble, haga arrancar el motor y h_galo funcionar hasta que las lineas del combustible y el carburador queden vacfos. La pr6xfma temporada use combustible nuevo. Vea las Instrucciones Para El Almacenamfento para m_s fnformacfbn. Nunca use productos de limpfeza para el motor o para el carburador en el estanque del combustible pues se pueden producfr daSos permanentes. ° Mantenga la parte superior del motor, alrededor del arrancador, despejada y sfr_ recortes de c_sped y paja. Esto ayudar_t el fluio del aire del motor y extender_ su duraci6r_. aceite CONSEJOS PARA SEGAR Y ACOLCHAR IMPORTANTE: Para obtener el mejcr rendimfentc manterlga la caja de la segadora sirl acumu]acfcn de cesped y basura. Vea "LIMPIEZA _ erl la secciorl de Manterlfmerlto de este marlual. "Pap_del rellenador de gasolina PARA PARAR EL MOTOR ° Para parar el motor, suelte la barra de ccrltroles que exfgerl la presencia del operador. PARA HACER ARRANCAR EL MOTOR AVISO: Debfdo alas capas protectoras del motor, ureacar_tfdad peque_a de humo puede estar presente durante el uso fnicfal del producto y se debe cor_sfderarr_ormal. 1. Para hacer arrancar url motor fr°c, empuje el cebadcr tres (3) veces antes de tratarlo. Empuje firmemente. Este paso rlormalmerlte rio es necesario cuarldo se hace arrancar url motor que ya ha estadc furlcforlarldo pot urlos cuantcs minutcs. 2. Sujete la barra de contrcles que exigerl la preserlcia del cperador abajo en el marlgc y tfre el mango del arrancador r_tpidamente. Nc permfta que el cord6rl arrarlcadcr se devuelva abruptamente. AVISO: En clfmas m_s frios puede que sea necesaric repetfr los pasos del cebadc. Erl climas m_s caluroscs el cebar demasiado puede producfr el ahcgc y el motor r_ova a arrar_car. Si se ahoga el motor espere ur_os cuantos mir_utos ar_tes de tratar de hacerlo arrar_car y no repita los pasos del cebado. ° La cuchilla acclchadcra especial va a vclver a ccrtar los recortes de c_sped muchas veces, y los reduce en tamaSo, de mcdo que sf se caen en el c_sped se var_a dfspesar erltre _ste y ncse varl a rlotar. Tambi_n, el c_sped acolchado se va a deshacer r_pfdamerlte entregando substarlcias nutrftfvas para el c_sped. Sfempre acclche corl la velocidad del motor (cuchf]la) m_ts alta, pues asf se obterldr_ la mejor accibrl de recorte de las cuchillas. ° Evite ccrtar el c_sped cuando este mojadc. El c_sped mcjado tfende a format mor_tor_es e ir_tefffereccr_ la acci6r_ de acclchadc. La meicr hora para segar el c_sped es temprano en la tarde. A esa hcra _ste se ha secado y el _trea reci_n cortada r_oquedar_ expuesta al sol dfrectc. ° Para cbter_er los meiores resultados, ajuste la altura del corte de la segadora de mcdo que _sta ccrte sclamente el tercio superfcr de las hcjas de c_sped. En el casc de que el c_sped haya crecfdo demasfadc, puede set necesaric el elevar la altura del torte para reducir el esfuerzc necesaric para empujar la segadcra y para evitar scbrecargar el motor, dejandc mcntcnes de reccrtes de c_sped. Para un c_sped muy pesado, reduzca el anchc del ccrte pasandc pcr encima del lugar antericrmente ccrtado y siegue lentamente. CONSEJOS PARA SEGAR • Bajo ciertas ccndicfo#es, taI como c_sped muy alto, puede set necesario el elevar la altura del corte para reducir el esfuerzc r_ecesarfc para empuiar la segadcra y para evitar scbrecargar el motor, dejar_dc moretones de reccrtes de c_sped. Puede que sea r_ecesarfc reducfr la velccidad del recorridc y/c haga funcicr_ar la segadcra scbre el _rea pot segunda vez. • Para un ccrte muy pesadc, reduzca el ancho del corte pasar_dc parcfalmente pot er_cfma del lugar anterformente cortado y siegue ler_tamer_te. • Para un mejor er_sacado del c@sped y para la maycria de las ccndicfones de corte, la velocidad del motor debe ajustarse a la posfcf6n de R._PIDO. • Los pcrcs er_ los recogedcres de c@sped de tela pueden Iler_arse cor_ mugre y pclvo ccn el uso y los recogedores recaudar_n mer_cs c_sped. Para evftar _ste, rocie el reccgedor con la mar_guera de agua, regularmer_te, y d_ielo secarse ar_tes de usarlo. ° Cfertcs tfpcs de c_sped y sus condicfor_es pueden exigir que un _rea ter_ga que set acclchada pcr segur_da vez para escor_der completamente los recortes. Cuar_do se haga el segur_do ccrte, siegue atravesado (er_ forma perper_dicular) a la pasada del prfmer corte. ° Cambfe su patr6r_ de corte de semar_a a semar_a. Siegue de r_ortea sur urea semar_a y luego cambie de este a ceste la pr6xfma semar_a. Estc evftar_t que el c_sped se er_rede y cambfe de direccf6n. 29 PROGRAMA DE MANTENIMIENTO DESPUES CADA A.TES DECADA .O.AS O ALMACEuso TEMPORAD_ NAMIENTO R6vtsar si hay Sujetadores S_lalto_ ES LimpiarAn_peccionar 61Recoge_Qr _ de C6sperJ * Oor_trol_r los NeiJrn_tioos Oor_trol_r las R_Joda8 Motrtc_s *_ Limpiar la SegarJora*'*" D V p Limpiar deb_jQ I_ Cubierta do la Transmisi6n RGvtsar las C<_rreas y la_ I_lo_s ImD_l_das *'* *'* I_ RGvtsar / A'FiI_r/ Cambi_r la O_lc_ill_ Lul_riP.act6rl Lim#iar / Rec_rgar la Baterr_ ** _ R_¢tsar el nivel rJol Acoite _ _ R ambtarel Aceite Limpiar el Filtro de(Jelmetor AJre _2 nspo_ctonar el Silenciador Oambtar la Bujfa Oambtar el Oert_icPIo de Papel del Filtro de Ail_ _2 Vaotar el sistoma ¢Jelc_rl_lJl_n_ o a_dir iJr_estabilizador do c_rL_lJr_r_te. . ** *_ **_ (_ivie_'_÷qui_) S_;_as _ _q_ _i_ 3_;_z_s _n _r P_l_r Wti_r _ _ _ ti_p at 1234- AJ V Cambiarrndsa menudo cuandose opere bajocarga pesada o en ambientescon altas tempemturas. Dar servido mdsa menudocuandose opereen condicionessuciaso polvorosas. Cambie las c_Jchillas mas a menudocuandosiegue en terreno arenoso. Cargarpor 48 horasal fin de la temporada. RECOMENDACIONES GENERALES La garantia de esta segadora no cubre los art°culos que ban estado suietos al abuso o a la _eglige_cfa del operador. Para recfbfr todo el valor de la gara_t°a, el operador tiene que rnantener la segadora segdn las i_strucciones descfitas e_ este manual. TABLA DE LUBRICACION (_ Aceite del motor Hay algunos ajustes que se tienen que hacer e_ forma peribdfca para poder mantener su ur_fdad adecuadarnente. 1_ Bfsagra )uerta chadora AI menos una vez oada estaoibn cornprobar si es necesafio efectuar los ajustes descritos en las secciones de Servicio y Ajustes de este manual. 0._ Bfsagra de la puerta traser • Una vez al aSo, carnbfe la bujia, lirnpfe o carnbie el elemerlo del filtro de aire y revise si la cuchf]la est_ desgastada. Una buj°a r_uevay ur_elemento del ffitro de afre limpio/ _uevo asegura_ la rnezcla de aire-oornbustfble adecuada y ayuda_ a que su motor funcio_e mejor y que dure m_ts. • Siga el prograrna de rna_te_fmfe_to e_ este mal_ual. 1_ Ciavfja de rnorlaje del puntal del rear, go ,{1_Rocie el Iubricante ,_ Vea 'MOTOR' ANTES DE CADA USO • Revise el nfvel del acefte del motor. • Revise si hay sujetadores sueltos. en la section de Mantenimiento IMPORTANTE: No aceite o engrase los rodarnie_tos de la rueda de plastic& Los lubrica_tes visoosos ateara_ polvo y rnugre, Io aoortara la duracion de los rodarnie_tos autolubrica_tes. Sf cree que tie_e_ que lubficarse, use Iosame_te un lubrica_te tipo crafito, de polvo seco, en forrna rnoderada. LUBRICACI(_N Mantenga la unfdad bier_ lubficada (yea la "TABLA DE LUBRICACION_). 30 Borde de salida SEGADORA Siempre observe las raglas de segurldad cua_do haga el ma_te_imfento. LLANTAS ° Mar_ter_galas Ilar_tassin gasolina, acefte o substar_clas qufmicas para control de insectos que pueden da_ar la goma. ° Evite los tocones, las pledras, las grietas profundas, los objetos afflados y otros peligros que pueder_ da_ar alas llantas. RUEDAS DE IMPULSI(_N Revfse las ruedas de fmpu]si6_ traseras cada vez a_tes de segar, para aseguraree de que se mueve_ libremente. Si las ruedas no gira_ libreme_te qufere decfr que hay basura, recortes de c_sped, etc. dentro del _trea de las ruedas de fmpu]si6n y de la cubferta contra el polvo y tie_en que limpiaree para liberarlas. CUIDADO DE LA CUCHILLA Para obte_er los meiores resultados, la cuchf]la de la segadora tie_e_ que mantenerse aff]ada. Cambfe la cuchf]la doblada o daSada. PARA REMOVER LA CUCHILLA Adapta.dor de 18.cuchilla. Arandela. Cuchilla. endurecida. Perno de 18.cuchilla. PARA AFILAR LA CUCHILLA AVISO: No recome_damos el afilar la cuchllla - pero sf 1ohace, aseg_rese de que quede bala_ceada. Se tiene que refer cufdado de ma_tenerla bala_ceada. Una cuchil]a que _o est_ balanceada va a producir eve_tualmente daSo en la segadora o en el motor. ° La cuchilla puede afilarse con una lima o en urea rueda rectfffcadora. No trate de affiarla mientras se e_cue_tra en la segadora. ° Para revfsar el balance de la cuchil]a, clave u_ clavo en una vfga o e_ la pared. Deje alrededor de u_a pulgada de un clavo recto expuesto. Ponga el agujero central de la cuchilla sobre la cabeza del clavo. Si la cuchilla ester balanceada debe permanecer e_ la posfci6_ horizontal. Si cualquiera de los extramos de la cuchil]a se mueve hacia abajo, aff]e el extremo pesado hasta que _sta quede balanceada. RECOGEDOR DE ClaSPED • El recogedor de c_sped puede ser roclado co_ el agua de la manguera pero tiene que estar seco cuando se vaya a usar. ° Revfse su recogedor de c_sped a menudo para veriffcar sf est_ daiiado o deterforado. Se va a desgastar co_ el uso normal. Si se necesfta cambiar el recogedor, c_tmbfelo solame_te por u_o que sea aprobado por el fabrfcante. D_ el n_mero del modelo de la segadora cuando 1oordene. MOTOR LUBRICACK_N Use solamente aceite de detergente de alta calidad clasificado co_ la claslficaci6_ SF-SJ de servlcio API. Seleccione la calidad de vlscosidad SAE seg_ su temperatura de operaci6_ esperada. 1. Desconecte el alambre de la buj°a y p6_galo en donde _o pueda e_trar e_ co_taoto con _sta. 2. Haga desca_sar la segadora e_ su lado. Aseg_rese que el ffltro de afre y que el carburador queder_ mirar_do hacia arriba. 3. Use un bloque de madera entre la cuchilla y la caja de la segadora para evftar que la cuchf]la gire cuando se le quite el perno. AVISO: Proteja sus manos con guar_tes y/o e_vuelva la cuchflla con u_a tela gruesa. 4. Remueva el perno de la cuchilla gfr_t_dolo en el sentido contrario en que gfran las manfllas del reloj. 5. Remueva la cuchf]la y los art°culos de ferreter°a adiuntadores (el perno, la arandela de seguridad y la arandela endurecfda). PARA CAMBIAR LA CUCHILLA 1. Po#ga la cuchilla en el adaptador de _sta ali_ea_do los dos (2) agujeros en la cuchilla con las salientes elevadas en el adaptador. 2. Aseg_rese de que el borde de salida de la cuchilla (opuesto al borde afflado) est_ hacia arrfba hacfa el motor. 3. Instale el perno de la cuchil]a co_ la arandela de seguridad y la ara_dela e_durecida en el adaptador de la cuchflla y el cfgueSal. 4. Use un bloque de madera entre la cuchilla y la caja de la segadora y aprfete el pemo de la cuchil]a gir_tndolo en el sentido e_ que gfran las ma_f]las del reloj. ° La torsi6_ para apretar recome_dada es de 35 - 40 pfes Ifbras. IMPORTANTE: El perno de la cuchil]a es tratado a calo. Si es necesario sustftufr los pernos, sustituirlos s61o con pernos aprobados mostrados e_ la secci6_ Partes de Reparaci6n de este manual. CAL[DADES DE V]aCOSIDAD 31 DE SAE FILTRO DE AIRE Su motor puede sufrir averias y fur_cfonar de rear, era fr_correcta oor_ ur_ ff]tro del afro suofo. Sustituir el papel del oartucho una vez al arlo o tras 100 horas de fur_cfonamfer_to, m_ts a mer_udo si se utiliza er_ condfoior_es de suoiedad y polvo partfculares. PAR& LIMPIAR EL FILTRO DE AIRE AVISO: A pesar de que los aceites de multivfscosfdad (5W30, 10W30, etc.) mejora_ el arrar_que er_ clima fr°o, estos aceites de multivfsoosfdad van ha aumentar el consumo de aoefte ouando se usan en temperaturas sobre 32 ° E Revise el nivel del aceite del motor m_ts a menudo, para evitar un posfble dafio en el motor, debfdo a que r_otier_e suffoier_te aceite. Cambfe el aceite despues de 25 horas de operaoibr_ o pot 1omenos urea vez al aSo sf la segadora se utiliza menos 25 horas el afio. Revfse el rWel del aoeite del c_rter antes de arrar_car el motor y despues de cada cfnco (5) horas de uso contir_uado. Apriete el tap6r_ del aoefte er_ forma segura cada vez que revfse el nivel del aceite. PARA CAMBIAR EL ACEITE DEL MOTOR 1. Suelte el tomfllo e fnclir_e la oubierta para removerlo. 2, Cuidadosamer_te, remueva Limpielo golpe_r_dolo suavemente er_ urra superficie plar_a. Si est,_.tmuy sucio cambie el oartucho. _I=PRECAUCI6N: Los solventes de petr61eo, tales como el keroser_o, r_ose deben usar para limpfar el oartuoho. Pueden produoir el deterforo de _ste. No aoefte el oartucho. No use afra a presf6n para limpfarlo o seoarlo. 4. Ir_stale el cartucho, luego vuelva a por_er la oubferta asegur_tr_dose que las oreias est_n alineadas cor_ las rar_uras en la planoha trasera. Aprfete el tomfllo en forma segura. AVlSO: Antes de fr_clir_arla segadora para dranar el aoeite, drone el tar_que de combustible hacfendo correr el motor hasta que el tar_que est_ vacfo. 1. Desoonecte el alambre de la buj°a y pbr_galo de modo que r_o pueda er_trar er_ oontacto oor_ _sta. 2. Remueva la tapa del dep6sfto del aoeite; dejela a ur_ lado er_ urea superffoie limpia. 3. Inclir_e la cortadora de cesped por este oostado tal oomo se muestra y purgue el aceite en un reoipier_te idbneo. Mueva la segadora de atr_ts para adelar_te para ramover todo el acefte que se haya quedado atrapado der_tro del motor. Rarluras Labio Cubiert_ 4. 5. 6. 7. 8. 9. el cartucl_o. 3, Orejas de la cubiert_ SILENCIADOR Inspeccione y cambie el siler_oiador si est_ corroido puede produoir ur_ peligro de fr_cer_dfo ylo daSo. BUJiA Cambie el bujia al comienzo de cada temporada de siega o despu_s de cada 100 horas de operaci6n, Io que suoeda primero. El tipo de buiia y el ajuste de la abertura aparecer_ en "ESPECIFICACIONES DEL PRODUCTO _ seccf6r_ de este mar_ual. Umpie todo el aceite derramado er_ la segadora y er_ el lado del motor. Echar aoefte despaoio er_ el cor_ducto del aceite, par_ndose a fntervalos regulates para controlar el nfvel del aoefte oor_ la varilla. Parar de afiadir aoefte ouando se aloanza la sefal de Iler_o (FULL) en la varf]la. Esperar un mfnuto para dejar que el aceite se arragle. Cor_tfnOe agregando car_tfdades pequeas de acefte y vuelva a fr_speccior_ar la varil]a medfdora settles del r_ivelde aoiete er_ l]eno (FULL). NO sobrelle_e el motor co_ aceite, o fumar_ pesa dema_te del sf]enciador cua_do Io valla a arra_car. AsegOrese de apretar la varilla medidora del aceite a_tes de arrancar el motor. Vuelva a conectar el alambra de la bu]ia a _sta. LIMPIEZA IMPORTANTE: Para obtener el meior rendimir_eto, mantenga la oaia de la segadora sir_ acumu]acfon de cesped y basura. Limpfe la parte de abaio de su segadora despues de cada uso. _PRECAUCI(_N: Desoor_ecte el alambre de la buj°a y p6r_galo er_ dor_de r_opueda entrar en contacto con _sta. • Haga descansar la segadora en su lado. Aseg0rese que el filtro de afro y que el carburador queder_ mfrando hacia arriba. Lfmpfe la parte frfferior de su segadora rasp_ndola para remover la acumulacibr_ de cesped y basura. 32 ° Umpieel motor a mer_udo para evftar que se aoumu]e la basura. Ur_ motor tapado fur_oior_a m_ts oalier_te y se aoorta su duraoi6r_. ° Mar_ter_ga las superficies pu]idas y las ruedas sin gasolfna, aoeite, etc. ° No reoomendamos el uso de una manguera de jardir_ para Ifmpiar la segadora a metros que el sfstema el_ctrfoo, el siler_cfador, el filtro de ape y el carburador est_r_ tapados para evitar que les er_tre el agua. El agua en el motor puede aoortar la duraoi6r_ de _ste. LIMPIE DEBAJO DE LA CUBIERTA DE LA IMPULSION Limpie debajo de la cubierta de la impu]si6n pot Io metros dos veces oada temporada. Raspe debaio de la oubierta oor_ ur_ cuohilio para masflla o cor_ una herramfer_ta parecfda, para remover toda acumulaof6r_ de o_sped o basura er_ la parte inferior de la cubierta de la fmpu]sibr_. _u_,DVERTENCIA: Para evftar lesfbr_es serias, ar_tes de dar calquier servico o de hacer ajustes: 1. Suelte la barra de control y pare el motor. 2. AsegOrese que la cuchil]a y que todas las partes movibles se hayar_ detenido completamente. 3. Desconecte el alambre de la buj°a y p6r_galo en donde r_opueda er_trarer_cor_tacto con _sta. 3. Quitar el cable del mando de la ancla, luego separar el resorte del conjur_to palar_oa de trar_smisfbr_ (Vea la Figure B). Cable de m_ndo _nol_ Conjunto p_l_nca de transmisi6n SEGADORA PARA AJUSTAR LA ALTURA DE CORTE Vea "PARA AJUSTAR LA ALTURA DE CORTE" e_ la seccib_ de Operacf6n de este mar_ual. DESVIADOR TRASERO Se proporoior_aun desviador trasero, adjur_to er_tre las ruedas traseras de su segadora, para reducfr a un mir_fmo la posibilfdad que obietos sean lar_zados hacia afuera de la parte trasera de la segadora, en la posicibn en dor_de se er_cuer_tra el operador. Sf se daSa el desvfador debe oambfarse. PARA REMOVER LA CORREA DE IMPULSION 1. Desoonecte el alambre de la buj°a y p6r_galo en donde r_opueda er_trarer_cor_tacto con _sta. 2. Quftar los tornf]los que sujetan la tapa del rear,do y quitar la tapa del mando del bastidot del cortac_sped (Vea la Figure A). de ms.ndo Correa de mando \ Dispositivo de fijaci6n \ Figure B 4. 5. 6. Empernar el coniunto palanca de transmfsibr_ para aflojar la correa de mando, luego quitar la oorrea de ma_do de la polea de mando, los dispositivos de fijacibn de la cottea y la palanca de transmfsi6r_. Haga descansar la segadora er_ su lad& Aseg0rese que el filtro de ape y que el carburador queden mfrando hacfa arriba. Quitar el tomillo que ffia la pantalla de los escombros. Noten que la par_talla de los escombros tfer_e urea ler_g0eta que se introduce en un orificio del bastidor (Yea la Figure C). CiguePis.I Oreja Ads.ptador de I_ cuchill_ Orificio en ' _as_idor del cort_c_sped Arandela de endu recid_ Y_pa del mando los escornbros _orde de salidg Figure A Orificio en el b_stidor 33 Figure C Perno de 18. cuchiIIs. Arandelg de seguridad 7. Use un bloque de madera entre la cuohilla y la caja de la segadora para evftar que la ouchf]la gire ouando se le quite el perno. AVISO: Proteja sus manos con guantes y/o envuelva la cuohllla con una tela gruesa. 8. Remueva el perno de la cuohilla. g. Quftar la cuohilla y todos los disposftfvos de fijaoi6n (pemo, arandela de freno, arandela templada), adaptador de la ouchilla y pantal]a de los escombros oomo un Onfco ooniunto. 10. Quftar la oorrea de mando del adaptador de la cuchilla y la pantal]a de los esoombros; elimfnar la oorrea vfeja. PARA CAMBIAR LA CORREA DE IMPULSION 1. Colocar la nueva correa de mando en el estribo de la pantalla de los escombros. Asegurarse de colocar la correa entre los dfspositivos de ffiacf6n de la correa y las ranuras como mostrado (Vea la Ffgure D). Dispositivos de fijaci6n, R_nura P_nt_ll_ de los escombros g. Instalar la nueva correa de mando en el coniunto de la palanca de transmfsi6n, luego alrededor de la polea de mando. Asegurarse de que la correa se halle al interior de los disposltlvos de fijaoi6n de la oorrea (Vea la Figure B). NOTA: TPando la correa de mando (para fnstalarla en la polea de mando) provocar_ la liberacf6n de la otra extremidad de la correa del estrfbo de la pantalla de los escombros y entrar en contacto con el cabo de la polea del adaptador de la cuchflla. 10. Volver a colocar el rasorte del cable del mando en el conjunto de la palanca de transmisf6n, luego fijar el cable de mando al ancla. 11. Volver a colocar la tapa del mando con los tornf]los precedentemente quitados. 12. Conectar el hflo de la buj°a de encendido a la buiia de encendfdo. PARA AJUSTAR EL MANGO El rear,go de su segadora cuenta cor_mOltiple posiclones dealtura-ajOsteloalaalturaquele aoomode. 1. Remueva la manil]a y el perno portador en un lado del mango fnferior. 2. AI mfsmo tfempo que suieta el conjunto del mango, remueva la manflla y el perno portador del lado opuesto. Alinee el agujero en el mango con el agujero deseado en el puntal del mango y vuelva a montar el perno y la manilla y apri_telos en forma segura. 3. Alinee el lado opuesto del mango con el agujero de la misma posici6n y aseg0relos con el perno y la manilla. Manilla Figure D 2. Colocar la otra extremfdad de la nueva oorrea de mando a tray,s del orfffcio en el bastidor. 3. Fiiar otra vez la pantal]a de los escombros al bastfdor con el tomfllo precedentemente quitado. Asegurarse de que la leng0eta de Alta la pantalla de los escombros se halle en el orfffcfo del bastidor. 4. Ponga la cuohilla en el adaptador de _sta alineando los dos (2) agujeros en la cuchilla con las salientes elevadas en el adaptador. m_ngo 5. AsegOrese de que el borde de salida de la ouchf]la (opuesto al borde afflado) est_ hacfa arrfba hacfa el motor (Vea la Ffgure C). 6. Instale el perno de la cuchil]a con la arandela de seguridad y la arandela endureoida en el adaptador de la ouohflla y el cfgueSal. 7. Use un bloque de madera entre la cuohilla y la caja de la segadora y aprfete el pemo de la cuchil]a gir_tndolo en el sentido en que MOTOR gfran las manf]las del reloj. VELOCIDAD DEL MOTOR • La torsi6n para apretar recomendada es de 35 - 40 pfes Ifbras. La velocidad del motor ha sfdo aiustada er_ la f_tbrica, No trate de aumentar la velocfdad del motor IMPORTANTE: El perno de la cuchil]a es tratado a oalo. Si es necesario sustftufr los pues se pueden producir lesiones personales. Si pernos, sustituirlos s61o con pernos aprobados cree que el motor ester funoionando demaslado mostrados en la secci6n Partes de Reparaci6n r_pldo o demasiado lento, lleve su segadora a de este manual. mas con su cenVo de servicfo Sears o con un otto oentro de se_icfo cualifioado. 8. Volver a oolocar el oortao_sped en posiof6n vertical. 34 CARBURADOR Su carburador no es ajustable. Sf su motor no est_i funcfonando en forma adeouada debfdo a problemas que se sospeoha vienen del oarburador, Ileve su segadora a oontacto con su oentro de servicfo Sears o con un otto centro de servfcfo cualiffcado para repararla y/o aiustarla. IMPORTANTE: Nunca manfpule el regu]ador del motor, el que ha sfdo aiustado en la f_ibrica para la velocfdad del motor adecuada. Puede ser peligroso hacer funcionar el motor a una velocfdad pot sobre el ajuste de alta velocfdad de la f_tbrfca. Si crse que la velocfdad alta regulada del motor necesita ajuste, contacto con su centro de servioio Sears o con un otro centro de servicio cualificado, el que cuenta con el equipo adecuado y la experiencfa para hacer los ajustes necesarios. Inmedfatamente prepare su segadora para el almacenamiento al final de cada temporada o sf la unfdad no se va a usar pot 30 dias o m_ts. Barra de control que exige la I operador Mang: SEGADORA Cuando se va a guardar la segadora por cferto periodo de tfempo, limpiela cuidadosamente, remueva toda la mugrs, la grasa, las hojas, etc. Gu_irdela en un _irea limpia y seca. 1. Lfmpie toda la segadora (Vea "LIMPIEZA" en la seccf6n de Mantenimento de este manual). 2. Lubriquela segOn se muestra en la seocfbn de Mantenimento de este manual. 3. Asegdrese de que todas las tueroas y olavfias y todos los pemos y tornf]los est_n apretados en foma segura. Inspeooione las partes que se mueven para verificar sf est_tn dai_adas, quebradas o desgastadas. C=_imbielassf es necesario. 4. Retoque todas las superficies que est_n oxfdadas o con la pfntura picada; use una liia antes de pfntar. Mango PosiciOn para segar Manilla MANGO Puede doblar el mango de su segadora para el almacenamiento. NOTA: El mango superior tiene un soporte "contra-dobla _ sftuado en el lado izquierdo del mango. Este soporte evfta que el mango superior doble hacfa adelante, lo cual ayuda a proteger _1 (los) cable(s) de control contra cualquier da5o. 1. Suelte las dos (2) manf]las del mango en oada lado del mango superior y permfta que el mango se doble hacfa detras. 2. Remueva las dos (2) manf]]as y los pemos de oada lado del mango inferior y pfvote el conjunto entero del mango haoia delante y permira le que se desoanse sobre la segadora. 3. Vuelva a poner las manillas y los pemos al mango inferior o a los puntales del mango para la seguridad. • Cuando prepare su mango a partfr de la posfcf6n de almaoenamfento, el mango inferior neseoitara oerrarlo manualmente para la posfcf6n de sega. IMPORTANTE: Cuando doble el mango para el almacenamiento o el transporte, aseg0rsse que lo doble seg0n se muestra o purde dafar los cables de control. Soporte 35 MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es fmportante evitar que se formen depositos de coma en partes fundamentales del sistemade combustible tales como el caffourador, el fi]tro del combustible, la mangura del combustible o en el estanque durante el almacenamiento. Los combustibles mezolados con alcohol (conocfdo come gasohol o que tienen etanol o metanol) Pueden atraer humedad, lo que conduce a la separacfon y a la formaoi6n de aoidos durante el almacenamiento. La gasolina aofda puede danar el sfstema de combustible de un motor durante el perfdo de almaoenamfento. • Vacfareldep6sitodelcarburante poniendo enmarchaelmotory dei_tndolo funcfonar hastaqueel carburante termfne y el ClLINDRO 1. Remueva la buj°a. 2. Vac°e una onza (2g ml) de acefte a trav_s del aguiero de la bujia en el cf]indro. 3. Tire la manilla de arranque lentamente unas ouantas veces para distrfbuir el aceite. 4. Vuelva a montar la nueva buiia. OTROS ° No guarde la gasolina de una temporada a la otra. ° Cambfe el envase de la gasolfna si se empfeza a oxidar. La oxfdaofbn y/o la mugre en su gasolina produci_n problemas. ° Si es posible, guarde su unidad en un reofnto cerrado y o0brala para protegerla oontra el polvo y la mugre. ° Cubra su unfdad con un forro protector adecuado que no retenga la humedad. No use pl_tstico. El pl_tstico no puede respPar, 1o que permite la formaoibn de condensacf6n, 1oque produoir_t la oxfdaoibn de su unfdad. IMPORTANTE: Nunca oubra la segadora mientras el motor y las areas de escape todavfa estan calfentes. _I=PRECAUCI()N: Nunoa almacene la oarburador est_ vaoio. • Nunca use los pr_ductos para limpieza del carburador odel motor en el estanque de combustible pues se pueden producir daiios permanentes. • Use combustible nuevo la pr6xima temporada. AMISO: El estabf]izador de combustible es una alternativa aceptable para reducfr a un minfmo la formaci6n de dep6sitos de goma en el combustible durante el per°odo de almacenamfento. Agregue estabilizador a la gasolina en el estanque de combustible oen el envase para el almacenamiento. Sfempre sfga la proporci6n de mezcla que se encuentra en el envase del estabilfzador. Haga funcionar el motor pot 1o menos 10 minutos despu_s de agregar el estabilizador, para permitir que este liegue al carburador. No drone la gasolina del estanque de gasolina y el carburador sf se ester usando estabilizador de combustible. ACEITE DEL MOTOR Drene el aoeite (con el motor calfente) y c_tmbielo con acefte de motor limpfo. (Vea "MOTOR" en la seccf6n de Mantenimento de este manual.) segadora con gasolina en el estanque dentro de un ediffcfo en donde los gases pueden alcanzar una llama expuesta ouna ohispa. Permita que se enfr°e el motor antes de almacenarla en algOn reointo cerrado. SOLUCI(_N DE PROBLEMAS -Vea la section este ditigido a un centro de servico Sears. PROBLEMA CAUSA No arranca 1. Ffltro de afro sucfo. 2. Sin combustible. 3. Combustible ranoio. 4. Agua en el combustible. 5. 6. 7. Alambre de la buiia desconectado. Bujia mala. Cuchil]a suelta o adaptador de la cuohilla quebrado. 8. Barra de control en la posioibn suelta. 9. Barra de control defectuosa. 10. V_tlvula del combustible (sf equfpada) est_ en la posioibn OFR 11. Bateria d_bi (sf equipada). 12. Desconecte el conector de la bater°a (si equfpada). 36 ap_opiada en el manual amenos que CORRECCI(_N 1. Limpie/cambfe el filtro de ape. 2. Llene el estanque de combustible. 3. Vacfar el estanque y vuelva a Ilenarlo con combustible Ifmpio y nuevo. 4. Vacfar el estanque y vuelva a Ilenarlo con combustible Ifmpio y nuevo. 5. Conecte el alambre a la bujia. 6. Cambie la buifa. 7. Aprfete el perno de la cuchilla eatable el adaptador de la ouchf]la. 8. Presione la barra de control hacfa el mango. g. Cambie la barra de control. 10. Gire a la v_tlvula del combustible a la posioibn ON. 11. Cague la bateria. 12. Conecte la bater°a al motor. SOLUCION DE PROBLEMAS -Vea la seccion ap_opiada en el manual amenos que este dirigido a un centro de servico Sears. I PROBLEMA Falta de fuerza 1. Cuchil]a desgastada, doblada o suelta. 2. Altura de las ruedas dfspareja. 3. Velocfdad del motor lenta. _,. Acumulaci6n de c_sped, hojas o basura debajo de la segadora. 5. Demasfado aceite er_ motor. 6. Velocfdad de r_oorrfdo demasiado Mal cortedisparejo Vibraci6n excesiva Cordon arrancador dificil de tirar CORRECCI(_N CAUSA 1, Eleve la altura de torte. 2. 3. 4. Eleve la altura de corte. Limpie/cambfe el filtro de aire. Limpie la parte fr_ferior de la caja de la segadora. Revfse el r_fveldel acefte. Corte a urea velocidad de recorrido m_s lenta. 5. 6. r_tpfda. 1. Cuchil]a desgastada, doblada o suelta. 1. Cambie la cuchil]a. Aprfete el pemo de la cuchf]la. 2. Altura de las ruedas dfspareja. 2. Ajuste todas las ruedas a la mfsma altura. 3. Acumulaci6n de c_sped, hojas o basura debajo de la segadora. 3. Limpie la parte f_ferior de la oaja de la segadora. 1. 1. Cuchil]a desgastada, doblada o suelta. 2. Ciguei_al del motor doblado. 2. Cambfe la cuchil]a. Aprfete el perno de la cuohilla. P6ngase er_oor_taoto cor_ su oer_tro de se_fcfo Sears o oor_ ur_ otto oer_tro de servfcfo cualiffcado. 1. El frer_o del volante del motor 1. Presior_e la barra de oo_trol 2. est_i aplicado cuando se suelta la barra de cor_trol. Ciguei_al del motor doblado. 3. 4. 2. hacfa el rear,go superior antes de tirar el oord6n arrancador. P6ngase er_oor_taoto cor_ su oer_tro de se_fcfo Sears o oor_ ur_ otto oer_tro de servfcfo cualiffcado. Cambfe el adaptador de la ouohflla. Mueva la segadora a un lugar er_ donde el o_sped ha sido oortado o a una superfiofe firme para hacer arrar_car el motor. Adaptador de la cuchf]la quebrado. La cuchil]a se arrastra en el cesped. 3. 4. Recogedor de c_sped no se Ilena (si viene equ pado) L 1. Altura de corte demasfado baja. 2. Levar_tamfento de la ouohilla desgastado. 3. Recogedorsin ver_tf]acf6nde afre. 1. 2. Eleve la altura de corte. Cambie las ouchil]as. 3. Limpie el recogedor de cesped. Dificil de empujar 1. 2. 3. P_rdida de impulsi6n o retandase de la velocidad El cesped est,, demasiado alto o la 1. Eleve la altura de corte. altura de la rueda demasiado baja. Parte trasera de la 2. Eleve la parte trasera de la caja de caja/cuchf]la de la segadora la segadora (1) un lugar m=_isalto. arrastr_tr_dose en el cesped. Recogedor de c_sped 3. Vac°e el reoogedor de cesped. demasiado Iler_o. _,. Posfci6r_ de la altura del mango no adecuada para usted. 4. Ajuste la altura del mango de modo que le acomode. 1. Desgaste de la oorrea. 2. La correa est_ fuera de la polea. 3. Cable de la impulsf6n usado o roto. 4. El sistema de cor_troldel 1. 2. Revise/gamble corr_a de fmpu]si6n. Revise/vuelva a instalar la 3. 4. Cambie el cable de la impulsibr% Ajuste el control del mecanismo impulsor. mecanismo impulsor "suelto". 37 CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.377110 / 7 13 11 2 51 ! 42 43 29_ Co 31_ 41 32_ 39 46 14 27 40 24 39 50 16 36 37 CRAFTSMAN KEY NO, PART NO, t 2 3 4 5 6 7 8 183484 66322 183483 163460 163461 12000014 163462 183476 184373 6 10 11 12 17411318 164331 183463 13 14 15 16 17 18 19 2O 21 22 23 24 25 26 27 26 29 3O 18&q86 184572 150406 187183 851074 850263 183431 183428 183690 17600406 183609 751152 183445 183446 85463 163444 183447 183476 ROTARY LAWN MOWER - - MODEL NUMBER 917.377110 DESCRIPTION Hm.odle,Grsssbm.g,Rem.r Hairpin Cotter Rod, Rear Handle, Grasabag Grassbag Frame, Grassbag E-Ring Door, Grassbag Rod, Pivot Grm.ssbm.gAssembly, Complete (Consists of Key Numbers 1-8) Screw Tube, Rear Skirt Skirt, Rear Engine, Briggs & Str_tton, Model Number 125K02-0253-E1 (See Breakdown) Cover, Front Screw, Hex Washer Heed Bolt, Engine Moun_ng Blede, 21" Washer, Hardened Washer, Lock Screw, Hex Heed, Grade 8 Adapter, Blade Debris Shield Screw, Hex Heed, Serrated Mounting Bracket, Muleher Door Nut, Hex Rod, Hinge Spring, Muleher Door Decal, Danger Mulcher Door Knob Door, Discharge Chute KEY NO, PART NO, 31 32 33 -- 183478 183445 183475 184372 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 -- 187063){479 180833 183465 183613 187064X476 184568 66426 187162 183464){479 183474 182748 184576 185018 184570 86899X004 184569 183469 186958 185738 DESCRIPTION Spring, Door, Discharge Chute Rod, Door, Discharge Chute Discharge Chute, Plastic Discharge Chute Assembly, Complete (Consists of Key Numbers 30-33) Adjustment Bracket, Lower H_ndle, LH Kr_b, Star Bolt, Shoulder Deflector, Discharge Adjustment Bracket, Lower Handle, RH Bolt, Handle Wire Tie Bracket, Anti-Fold H_ndle Assembly, Lower Bail, Control Grip, Foam Handle Assembly, Upper (Includes Foam Grip) Cable, Engine Zone Control Screw Brasket, Upstop Nut Hex Rope Guide Kit, Housing Owner's M_nu_l Available accessories not included with lawn mower: 71 33623 71 &_500 71 33000 Gas Can (25 Gallon) Fuel Stabilizer SAE 3OW Oil (20 oz,) NOTE: All component dimensions given in U.S. inches. 1 inch = 2&4 mm CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.377110 34 32 13 30 16 38 \ 15 \ 14 4::O \ 16 34 \ 33 34 54 I I 2 j J" ! 46 16 46 _55 9 34 49 47 56 8 6 7 48 47 CRAFTSMAN KEY NO. PART NO. 183705 4:= 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 188277 187353 180982 188276 181698 184212X479 184987 180612 184455 184571 12000012 183450 187120 183699 751068 183855X004 17541011 184749 132010 183701 184543 188152 145212 73930500 183700X004 166043 160829 ROTARY LAWN MOWER - - MODEL NUMBER 917.377110 DESCRIPTION Drive Control Assembly, Complete (Consists of Key Numbers 2 through 7) Cover, Drive Control, Top Pulley, Drive Control Lever, Drive Control (red) Cover, Drive Control, Bottom Screw, Torx Head #8-5/8 Bracket, Mounting, Drive Control Cap, Drive Control, Bottom Cable, Drive Control Cover Assembly, Drive Screw Ring, Retaining Screw Bearing / Axle Support Gear Case Assembly (See Breakdown) Bearing, Ball (Wheel) Bracket, Gear Case/Drive Pulley Screw Pulley, Drive Nut, Hex, Flangelock Bolt, Idler Pulley Assembly, V-Groove O-Ring Nut, Hex, Flangelock Nut, Hex, Lock Idler Arm Pulley, Idler Bolt, Hex Head, Shoulder KEY NO. 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 PART NO. 17060410 183457 88348 184371 83923 183442 183437 188291 175098 12000058 175103 175105 175104 184172 187619X004 183436X004 163409 184370 183438 169675 183692X004 183688 188331 175102 183698X004 188330 186524 185913 DESCRIPTION Screw 1/4-20 x 1/16 Cover, Dust, Wheel Washer, Flat 3/8 Wheel Assembly, Rear 9 x 2-1/4 Nut, Hex Hubcap Knob Spring, Torsion Pawl E-Ring Gear Retainer, Drive, LH Disc, Drive Seal, Friction Lever, Selector, Wheel Height, Rear Lever, Selector, Wheel Height, Front Screw Wheel Assembly, Front 9 x 2-1/4 Bushing, Front Axle Retainer, Hairpin Cotter Torque Shaft Assembly, Front Belt, Drive Pinion Assembly, LH Retainer, Drive, RH Rear Axle Assembly Pinion Assembly, RH Decal, Drive Control Operation Decal, Drive Control Adjustment (Bottom) NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.377110 GEAR CASE ASSEMBLY - - PART NUMBER 183699 12 6 v 4 \\\ 8 / 5 6 10 \ \ \ KEY NO. PART NO. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 - - - 17541011 160672 57072 183908 160818 77881 160817 850848 184134 160679 160673 57079 12000039 86447 750369 184208 Screw, Tapping #10-24 x .668 Gear Case, Upper Seal Drive Shaft Bearing, Needle, Thrust Bearing Washer, Thrust Key, Hi-pro Shaft, Worm Gear, Helical Gear Case, Lower Washer, Hardened E-Ring Plug Grease Kit, Gearcase Replacement (Includes Grease) NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm 42 BRIGGS & STRATTON I 1019 LABEL KI_ 4-CYCLE ENGINE MODEL NUMBER 125K02-0253-E1 684 287 51 383 52511 524 635 718_ 5 306 307 10_ 2o_ 43 BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 125K02-0253-E1 425 334_ 621 _88 968 445 745 615 404 443 505 _ 12__.J 977 CARBURETOR GASKET SET 633 @ 365 137 61; 633_ -276_ 276_ 127_ 617 _,J @ 276_ 276_ 44 BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NUMBER 125K02-0253-E1 358 ENGINE GASKET SET 969 z© 20 _ 842@ 524_ 617 668@ 564_ 332 _ 304 324 78 37 363_ 305 670 @ 23 65 190 592_ 58_ 689 @ 597_ I EMISSIONS 1036 LABEL I 45 6O BRIGGS & STRATTON KEY NO. PART NO. 1 2 3 4 5 7 8 9 10 11 12 13 15 16 20 22 23 24 25 697322 399269 299819 493279 691160 692249 695250 696125 691125 691260 692232 690912 691680 691450 399781 691092 692315 222698 697339 697340 697341 697342 499425 499426 499427 499428 691866 499423 499424 691664 695759 262651 262652 691270 691270 694086 692194 691997 690548 691449 26 27 28 29 32 32A 33 34 35 36 37 40 43 45 46 4-CYCLE ENGINE MODEL NUMBER 125K02-0253-E1 DESCRIPTION Cylinder Assembly Kit-Bushing/Seal Seal-Oil (Magneto Side) Sump-Engine Head-Cylinder Gasket-Cylinder Head Breather Assembly Gasket-Breather Screw (Breather Assembly) Tube-Breather Gasket-Crankcase Screw (Cylinder Head) Plug-Oil Drain Crankshaft Seal-Oil (PTO Side) Screw (Engine Sump) Flywheel Key-Flywheel Piston Assembly (Standard) Piston Assembly (.010" Oversize) Piston Assembly (.020" Oversize) Piston Assembly (.030" Oversize) Ring Set-Piston (Standard) Ring Set-Piston (.010" Oversize) Ring Set-Piston (.020" Oversize) Ring Set-Piston (.030" Oversize) Lock-Piston Pin Pin-Piston Rod-Connecting Screw (Connecting Screw (Connecting Valve-Exhaust Valve-intake Rod) Rod) Spring-Valve (Intake) Spring-Valve (Exhaust) Guard-Flywheel Retainer-Valve Slinger-Governor/Oil Tappet-Valve Camshaft 46 KEY NO. PART NO. 48 498829 50 51 54 55 58 6O 65 78 81 95 97 104 117 118 121 125 127 130 133 134 137 146 159 163 187 188 190 202 209 222 227 276 287 300 304 305 306 307 497465 272199 691650 691421 692259 281434 690837 691108 691740 691636 696565 691242 498978 497466 498260 498170 694468 696564 398187 398188 693981 690979 691753 272653 691050 693399 690940 691829 690319 692467 690783 271716 690940 692038 695892 691108 690450 690345 DESCRIPTION Short Block (Replacement Engine 125K02-0253) Manifold-Intake * Gasket-Intake Screw (Intake Manifold) Housing-Rewind Starter Rope-Starter (Cut to Length) Grip-Starter Rope Screw (Rewind Starter) Screw (Flywheel Guard) Lock-Muffler Screw Screw (Throttle Valve) Shaft-Throttle OPin-FIoat Hinge Jet-Main (Standard) Jet-Main (High Altitude) Kit-Carburetor Overhaul Carburetor O Plug-Welch Valve-Throftle Float-Carburetor O Valve-Needle/Seat OSGasket-Float Bowl Key-Timing Bracket-Air Cleaner Primer •OSGasket-Air Cleaner Line-Fuel (Cut to Required Length) Screw (Control Bracket) Screw (Fuel Tank) Link-Mechanical Governor Spring-Governor Bracket-Control Control Lever-Governor O$Sealing Washer Screw (Dipstick Tube) Muffler Housing-Blower Screw (Blower Housing) Shield-Cylinder Screw (Cylinder Shield) BRIGGS & STRATTON KEY NO. PART NO. 324 332 333 334 337 356 358 363 365 383 404 425 443 445 456 459 505 523 524 525 529 562 564 584 585 592 597 601 604 608 613 615 616 617 621 633 635 668 670 684 695161 690662 695711 691061 802592 692390 497316 19069 692524 89838 690272 690670 692523 491588 692299 281505 231082 495264 692296 495265 691923 92613 698589 692342 691879 690800 691696 95162 698588 497680 691340 690340 691308 270344 692310 691321 66538 493823 692294 690345 4-CYCLE ENGINE MODEL NUMBER 125K02-0253-E1 DESCRIPTION Screen/CupAssembiy Nut (Flywheel) Armature-Magneto Screw (Armature Magneto) Spark Plug Wire-Stop Engine Gasket Set Flywheel Puller Screw (Carburetor) Wrench-Spark Plug Washer (Governor Crank) Screw (Air Cleaner Cover) Screw (Air Cleaner Primer Base) Filter-Air Cleaner Cartridge Plate-Pawl Friction PawI-Ratchet Nut (Governor Control Lever) Dipstick * SeaI-DipstickTube Tube-Dipstick Grommet Bolt (Governor Control Lever) Screw (Control Cover) Cover-Breather Passage * Gasket-Breather Passage Nut (Rewind Starter) Screw (Pawl Friction Plate) Clamp-Hose Cover-Control Starter-Rewind Screw (Muffler) Retainer-Governor Shaft Crank-Governor .Q_:SeaI-O Ring (Intake Manifold) Switch-Stop O$SeaI-Throttle Shaft Boot-Spark Plug * Spacer (Includes 2) Spacer-Fuel Tank Screw (Breather Passage Cover) KEY NO. PART NO. 689 718 741 745 842 847 851 868 869 870 871 691855 690959 691830 691648 691031 692017 493880 697338 691155 690380 262001 63709 698587 692135 695891 397974 496116 692298 691138 691669 693377 493640 694395 498261 494256 697457 692311 498144 498144 921 922 923 957 966 968 969 970 972 975 976 977 1019 1036 1059 1210 1211 RPM Settings: DESCRIPTION Spring-Friction Pin-Locating Gear-Timing Screw (Brake) * SeaI-O Ring (Dipstick Tube) Assembly-Dipstick/Tube Terminal-Spark Plug Seal-Valve Seat-Valve (Intake) Seat-Valve (Exhaust) Bushing-Guide (Exhaust) Bushing-Guide (Intake) Cover-Blower Housing Spring-Brake Brake Cap-Fuel Tank Base-Air Cleaner Primer Cover-Air Cleaner Screw (Blower Housing Cover) Screw (Air Cleaner Primer Bracket) Tank-Fuel Bowl-Float Primer-Carburetor Set-Carburetor Gasket Kit-Label Label-Emission Kit-Screw/Washer Assembly-Pulley/Spring (Pulley) Assembly-Pulley/Spring (Spring) Low: 1900-2100; High: 3000-3200 Included in Engine Gasket Set, Key No. 358 O Included in Carburetor Overhaul Kit, Key No. 121 Included in Carburetor Gasket Set, Key No. 977 NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm 47 Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME _ (1-800-469-4663) www.sears.com Anytime, day or night (U.S.A. and Canada) www.sears.ca Our Home For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Parts and Repair Center. 1-800-488-1222 Anytime, day or night (U.S,A, only) www.sears, com To purchase a protection or maintenance agreement (Canada) 1-800-827-6655 (U.S.A.) Para pedir servicio de reparaciSn a domicilio, y para ordenar piezas: 1-888-SU-HOGAR sM agreement (U.S.A.) on a product serviced 1-800-361-6665 by Sears: (Canada) Au Canada pour service en fran_;;ais: 1-800-LE-FOYER Mc (1-800-533-6937) (1-888-784-6427) www.sears.ca , E/ARS © Sea_, Roebuck and Co. ® Registered Trademark / TMTrademark / SMService Mark of Sears, Roebuck and Co. ® Marca Registrada / TMMarca de FAbrica / SMMarca de Servicio de Sears, Roebuck and Co. MCMarque de commerce / MDMarque d_pos_e de Sears, Roebuck and Co. 185738 Rev. 7 10.17.03 BY/BY/rad/BY/BY/BY/BY Printed in U.S.A.
This document in other languages
- español: Craftsman 917.377110