Download BenQ E1220 User manual
Transcript
E1220 Digital Camera User Manual Welcome Downloaded from ManualsCamera.com Manuals Copyright Copyright 2009 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes. All other logos, products, or company names mentioned in this manual may be the registered trademarks or copyrights of their respective companies, and are used for informational purposes only. Disposal of Waste Electrical and Electronic Equipment by users in private households in the European Union. This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment by handing it over to the applicable take-back scheme for the recycling of electrical and electronic equipment. For more information about recycling of this equipment, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment. CE Regulatory Notice Hereby, BenQ Corp. declares under our responsibility that the product is in conformity with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating, Electromagnetic Compatibility Directives (2004/108/EC) and Low Voltage Directive (2006/95/EC). A “Declaration of Conformity” in accordance with the above Directives has been made and is available from BenQ Corp. upon request. Downloaded from ManualsCamera.com Manuals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Downloaded from ManualsCamera.com Manuals Safety warning and notice Before operating the camera, please make sure that you read and fully understand the content in this section. If you ignore and violate all safety warning notices indicated in this section, the camera warranty may be void. Meanwhile, not only the camera but also you and all other people and things around you may be severely damaged, injured, or even placed in danger of death. For your safety • Keep the camera and its accessories out of the reach of babies, toddlers, and children. In particular, small parts such as memory cards and batteries could be easily dismantled and swallowed by them. • Use only the original accessories to avoid possible risks to health and property, and thus meet all related legal regulations. • Do not dismantle the camera under any circumstances. • When using the flash, do not go too close to human eyes (particularly for babies, toddlers, and children) or animal eyes. Otherwise, when the flash fires, the light may cause damage to human eyes or irritate animals. • Only use original batteries and charging devices. Otherwise you risk serious damage to health and property. The battery could explode, for instance. All batteries can cause property damage, injury or burns if a conductive material such as jewelry, keys or beaded chains touch exposed terminals. The material may complete an electrical circuit and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside your pocket, purse, or other container with metal objects. Do not dispose of batteries in fire as they may explode. • To prevent electric shock, do not attempt to disassemble or repair your camera by yourself. • Some camera models accept non-rechargeable batteries. When using these batteries, do not charge them. Otherwise, dangers such as explosion and fire may occur. Warranty • Warranty is void if damage or system failure occurred due to outside factors such as collision, fire, flood, dirt, sewage, earthquake, and other force majeure events as well as incorrect usage of electricity or use of non-original accessories. • It is the sole responsibility of the user if problems (such as data loss and system failure) occurred due to non-factory installed software, parts, and/or non-original accessories. • Do not change the camera. Any changes to the camera invalidate the warranty. Taking care of your camera • Always keep the camera in the accompanying leather case or pouch for better protection against splashes, dust, and collision. • The only way of replacing the battery and the memory card is to open the Battery / Memory card cover. • Dispose of unwanted batteries and cameras as permitted by the laws in your countries. • Water may cause a fire or electric shock. Therefore, store your camera in a dry place. • If your camera becomes wet, wipe it with a dry cloth as soon as possible. • Salt or seawater may cause severe camera damage. • Do not drop, knock, or shake the camera. A rude behavior of using the camera may damage the internal electronic circuit board, deform the lens shape, or make the lens unretractable. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the camera. • Finger grease may be left on the camera lens and will result in unclear images or videos. To avoid this problem, be sure to clean the camera lens before taking pictures or recording videos. You should also clean the camera lens on a regular basis. • If the lens is dirty, use a lens brush or soft cloth to clean the lens. • Do not touch the lens with your fingers. Downloaded from ManualsCamera.com Manuals • If a foreign substance or water gets in your camera, please turn the power off immediately and disconnect the battery. Next, remove the foreign substance or water and send it to the maintenance center. • Whenever there is data in the internal memory or the external memory card, you should make a backup copy to a computer or disc. So, you can have a backup solution if data loss occurs. • If the lens cannot retract into the camera, please replace the battery first (usually this is because of a drained battery). Then the lens should retract automatically. If the lens still cannot retract, please contact your dealer. • Under no circumstances should you push the lens back manually as this may damage the camera. • All original accessories are designed only for use with this camera model you purchased. Do not use these accessories with other camera models or cameras of other brands to avoid unpredictable danger or damage. • Before initial use of a memory card, always use the camera to format the card first. • Remember to slide the write-protect tab (if available) to the unlock position. Otherwise, all data (if any) on the memory card is protected and the card cannot be edited or formatted. Operating environment • Do not use or store your camera in the environments listed below: • Direct sunlight • Dusty places • Next to an air conditioner, electric heater or other heat sources • In a closed car that is in direct sunlight • Unstable locations • Do not use your camera outdoors when it is raining or snowing. • Do not use your camera in or near water. • The camera operating temperature is between 0 and 40 degrees Celsius. It is normal for the operating time to be shortened when the temperature is low. • The capacity of your camera battery will reduce each time it is charged/emptied. • Storage at too high or low temperatures will also result in a gradual capacity loss. As a result, the operating time of your camera may be considerably reduced, even after a full recharge of the battery. • It is normal for the camera to become warm during operation, because the camera casing can conduct heat. Downloaded from ManualsCamera.com Manuals Do not hold the camera by excessive force. Plus, be sure to protect the camera from strong impacts. To avoid accidental falling, please attach the hand strap to the camera and always hold the camera by keeping the hand strap around your wrist. If the battery suddenly depleted and caused the lens fail to retract, please carefully protect the lens to avoid collision and insert a battery with full power ASAP. When the camera is not in use, always turn the power off and make sure the lens has retracted successfully before storing the camera in its case. If you do not intend to use the camera for a long time, please remove the battery from the camera and store the battery carefully. Keep your camera away from sharp objects and avoid collision. When the camera is not in use, please place it in a steady place. Plus, always keep your camera away from pressure or any other similar environment (for example, in a pant pocket) to avoid possible damage. Downloaded from ManualsCamera.com Manuals Table of Contents Touring the camera ......................................................................... 1 Checking the package contents ........................................................................ 1 Camera .............................................................................................................. 1 Front view and bottom view ................................................................................... 1 Rear view .................................................................................................................. 2 Preparing the camera for use .......................................................... 3 Charging the battery ......................................................................................... 3 Using multifunctional buttons ......................................................................... 4 Using an SD card .............................................................................................. 4 Initial setting .................................................................................... 5 Setting language ................................................................................................ 5 Setting date and time ........................................................................................ 5 Operating the camera ...................................................................... 6 Capture mode .................................................................................. 7 More capture options in FUNC menu ............................................................ 8 Image size .......................................................................................................... 9 Flash mode ........................................................................................................ 9 Focus mode ..................................................................................................... 10 Image quality ................................................................................................... 10 Battery status ................................................................................................... 11 Setting EV ........................................................................................................ 11 White balance .................................................................................................. 11 ISO ................................................................................................................... 12 AE metering ..................................................................................................... 12 Effect ................................................................................................................ 13 Shooting mode ................................................................................................ 13 Aperture Priority ............................................................................................. 16 Shutter Priority ............................................................................................... 16 Manual mode .................................................................................................. 16 Drive mode ...................................................................................................... 16 Auto Exposure Bracketing (AEB) .................................................................. 17 AF area ............................................................................................................. 17 AF Assist Lamp ................................................................................................ 17 Setting sharpness, saturation and contrast .................................................... 18 Digital Zoom ................................................................................................... 18 Downloaded from ManualsCamera.com Manuals English Table of Contents Table of Contents English Date Stamp ......................................................................................................18 Instant Review .................................................................................................18 Auto Z-Lighting ..............................................................................................19 Smart Scene .....................................................................................................19 Blink Detector .................................................................................................19 Self Portrait / Love Portrait ............................................................................19 Pre-composition ..............................................................................................20 Smile Catch ......................................................................................................20 Movie Record mode settings ..........................................................................20 Other settings ................................................................................. 21 Playback mode ............................................................................... 23 Options for playback and editing ...................................................................24 Enlarging an image .................................................................................................24 Viewing multiple files at a time .............................................................................24 Playing back video clips .........................................................................................24 Adjusting the playback volume .............................................................................25 Slideshow ................................................................................................................25 Deleting files ...........................................................................................................25 Protecting files ........................................................................................................26 Red-eye Removal ....................................................................................................26 Voice memo ............................................................................................................26 Photo Effect ............................................................................................................26 Z-Lighting ...............................................................................................................27 Rotating an image ...................................................................................................27 Trimming ................................................................................................................27 Resizing ...................................................................................................................28 Startup image ..........................................................................................................28 DPOF ......................................................................................................................28 Working with computer and AV system ...................................... 29 Bundled software .............................................................................................29 Connecting the camera to a computer ...........................................................29 Connecting the camera to an AV system .......................................................29 Printing images ................................................................................................30 Printing with PictBridge ........................................................................................30 Troubleshooting and service information ................................... 31 Technical support ...........................................................................................32 Specifications ................................................................................. 33 Downloaded from ManualsCamera.com Manuals Touring the camera 1 Checking the package contents Carefully unpack your kit box and ensure that you have the following items. 1. User Manual / Quick Guide 2. Digital camera 3. USB cable 4. Battery 5. Hand strap 6. Leather case 7. Software CD 8. Battery charger 9. AC power adapter 10. AV cable • All pictures, screen captures, and icons used in this manual are for illustration only. Actual and available products, accessories, as well as their appearance may vary depending on sales region. • If any items are missing or damaged, contact your dealer. • Save the packaging for future shipment or storage. Camera Front view and bottom view 1. Shutter button 2. Flash 3. S.S.F. (Super Shake-Free) button 4. Power button / Status LED indicator) 5. AF Assist Lamp / Self-timer LED indicator 6. Lens 7. Microphone 8. Speaker 9. Tripod mount 10. USB / AV port 11. Battery / Memory card cover Downloaded from ManualsCamera.com Manuals English Touring the camera 2 Touring the camera Rear view 1. LCD display English 2. T (Tele) - Zoom-in or turn on the Shooting mode description 3. Strap eyelet 4. W (Wide) - Zoom-out, turn off the Shooting mode description, or enter the thumbnail view (Playback mode) 5. Playback mode button - Toggle between Capture and Playback modes 6. Multifunctional buttons (including a 4-way control and an button) 7. FUNC / Delete button - Activate FUNC menu (Capture mode) or delete photos (Playback mode) or return to the 8. MENU button previous menu • It is normal for the camera to become warm during operation, because metal camera casing can conduct heat. • The LCD display on this camera is manufactured with sophisticated technology, and more than 99.99% of the pixels on the LCD display meet standard specifications. Yet, it is possible that less than 0.01% of the pixels on the LCD display may have some light spots or show unusual colors. This is normal and does not indicate display malfunction, nor will this affect the pictures you take with the camera. • The LCD monitor looks darker in strong sunlight or bright light. This is not a malfunction. • To prevent your images from being blurred while pressing the shutter button, always hold the camera steady. This is especially important when you are shooting under low lighting conditions, under which your camera may reduce the shutter speed to ensure your images are properly exposed. Downloaded from ManualsCamera.com Manuals Preparing the camera for use 3 Use only the specified battery for the camera, and always turn off the camera before removing the battery. A To install the battery: B 1. Open the battery cover (A). 2. Insert the battery in the correct direction by matching the + - label on the battery cover (B). 3. Push the battery all the way down, until the battery lock lever clicks into place (C). 4. Close the battery cover (D). C To remove the battery: 1. 2. 3. 4. Open the battery cover. Press and hold the battery. Release the battery lock lever. When the battery has come out a little, gently pull it out the rest of the way. 5. Close the battery cover. D Charging the battery The battery charge status affects the camera performance. To maximize the performance and the battery life, fully charge the battery using the specified charger and AC power adapter, and then fully discharge it through normal use at least once. To charge the battery: 1. Insert the battery into the battery charger. 2. Connect one end of the AC power adapter to the battery charger. 3. Connect the other end of the AC power adapter to a wall outlet. 4. When the battery is being charged, the charger LED indicator lights up in red. When the battery is fully charged, it turns into green. Downloaded from ManualsCamera.com Manuals English Preparing the camera for use 4 Preparing the camera for use English • Damage caused by the use of an incorrect battery charger set is not covered under the warranty. • The battery may be warm after being charged or used. This is normal and not a malfunction. • When using the camera in a cold environment, keep the camera and its battery warm by holding it inside your jacket or another warm protective environment. • Remove the battery from the camera if you do not intend to use the camera for a long time. Using multifunctional buttons You can choose camera settings by pressing the 4-way control or the button. 1. Left/Focus: • Scrolls left in menus. • Toggles between different focus modes. 2. Up: • Scrolls up in menus. 3. Right/Flash: • Scrolls right in menus. • Selects a flash mode. 4. Down: • Scrolls down in menus. 5. : Confirms a chosen setting. Using an SD card The camera comes with internal memory for storing captured images, video clips, or audio files. You can also add an SD card to store more files. To install an SD card: 1. 2. 3. 4. Make sure the camera is turned off. Open the memory card cover. Insert an SD card in the correct direction. Close the memory card cover. To remove an SD card: 1. 2. 3. 4. Make sure the camera is turned off. Open the memory cover. Lightly press the edge of the memory card to eject. Close the memory cover. Before initial use of an SD card, press Format > > > Manage Memory > > Yes to format the card first. Downloaded from ManualsCamera.com Manuals / > Initial setting 5 You will be prompted to set up the language and the date and time when the camera is turned on for the first time. Setting language Selects the language version shown on the screen. To select a language: 1. Press > . (Step 1 is needed only after the initial setting is done.) 2. Press or press 3. Press 4. Press to locate or . , , or , , and then to locate the language you want. to set the language. Setting date and time When first time using the camera or the battery has been removed from the camera for a long time, you need to set the date and time. They are used to record when a file was captured. To set date and time: 1. Press > setting is done.) 2. Press or . (Step 1 is needed only after the initial to locate Date/Time, and then press or 3. Press or to select date and time and date format. Press column as needed. 4. Press to set the date and time. Downloaded from ManualsCamera.com Manuals . or to move to another English Initial setting 6 Operating the camera Operating the camera English The procedure below is a general guideline for basic operation. It is particularly useful if you are new to the camera. 1. Press 2. Press and to turn the power on. > , , , or ), and then press to locate desired options (under two different tabs: or to make selections. Remember to follow the on-screen display or press for instructions (wherever available). Next, press corresponding buttons to access and set more options. At any time, you can cancel the current operation by pressing to return to your previous step. 3. Press to zoom-in or to zoom-out. (In the Movie Record mode, you can still adjust the optical zoom before or during recording.) 4. Press the shutter halfway to set automatic focus. Once the focus is set, the focus frame color will turn from white (unfocused) to yellow-green (focused). 5. Press the shutter down fully to capture. 6. Release the shutter. 7. In the Movie Record mode, press the shutter to stop video recording. 8. Press to view captured images or recorded videos, and then press different images/videos. You can also press press to view 9 images on the screen. or , or to move to to zoom-in/out a captured image, or • During zoom-in/out, there is a separator in the zoom bar between and . For best image quality, it is recommended to use optical zoom only by keeping the magnification within and the separator. • Flash is automatically turned off in the Movie Record mode. • The Movie Record mode records both sound and video. The recording time is continuous, but recording will stop once the memory card space is full. • In the Movie Record mode, sound is temporarily muted during zoom-in/out. • Anytime in the Playback mode, you can press to switch to the Capture mode. • At any time, you can press to turn off the camera. • In Capture or Playback mode, press screen. to decide what information to show on the Digital Zoom Optical Zoom Downloaded from ManualsCamera.com Manuals Capture mode 7 9999 P EV -1.0 Item Description English Capture mode ISO A 100 Page reference 1 Shooting mode 2 Flash mode 13 9 3 Focus mode 10 4 Drive mode 16 5 AEB 17 6 S.S.F. -- 7 Number of shots available -- 8 Image size 9 10 9 Image quality 10 Face tracking -- 11 ISO 12 12 White balance 11 13 AE metering 12 14 Exposure value (EV) 11 15 AF area 17 16 Histogram -- 17 Battery status 11 18 Camera shake warning -- Downloaded from ManualsCamera.com Manuals 8 Capture mode English • In the Capture mode, press to toggle among 4 display modes (standard, complete, none, and rule of thirds). Use the rule of thirds display mode to improve your composition by placing subjects on at least one of the intersections of these 4 imaginary lines. • While the shutter is pressed halfway, the shutter speed and the aperture are also shown on the screen (not available in the Movie Record mode). • While the shutter is pressed down halfway, the AF area color changes to yellow-green, camera shake warning (appears only if the camera itself detects possible shaking), aperture, shutter speed and ISO setting are also shown on the screen. More capture options in FUNC menu Press the FUNC button to access more capture options. Depending on your settings, the displayed option icons in the FUNC menu may vary. My Mode (the 6 most recent record modes, in the order used) Resolution Image Quality Exposure Value (EV) White Balance ISO Metering Effect To use the FUNC menu: 1. Press 2. Press 3. Press to enter the FUNC menu and currently selected setting shows. , to go to another option, or press or to select a setting. to confirm the setting. Downloaded from ManualsCamera.com Manuals Capture mode 9 Image size Description Icon Description 12 megapixels (4000 x 3000) 3 megapixels (2048 x 1536) 3:2 (12 megapixels; 4000 x 2672) HD 16:9 (1920 x 1080 in full HD format) 8 megapixels (3264 x 2448) VGA (640 x 480) 5 megapixels (2592 x 1944) -- -- To select an image size: 1. Press 2. Press 3. Press > Resolution. or to select a setting. to confirm setting. Flash mode The flash offers an additional light source (usually used in a low-light environment). You can capture an image using one of the following flash modes. Icon Mode Description Auto Flash The flash fires automatically based on the photographic conditions. Auto Anti Red-eye Reduces the red-eye phenomenon when capturing natural-looking images of people and animals in low-light conditions. Be sure to ask the subject to look at the camera lens or get as close to the camera as possible. The flash fires automatically based on the photographic conditions. Force On The flash always fires regardless of the surrounding lighting conditions. Select this mode when capturing images with high contrast (backlighting) and deep shadows. Slow Sync Fires the flash immediately at the beginning of exposure with a longer shutter speed, so balanced ambient lighting of the foreground subject and background scene can be reached in a low-light environment. Force Off The flash does not fire. Select this mode when flash photography is prohibited, or when the distance to the subject is beyond the effective range of the flash. Downloaded from ManualsCamera.com Manuals English Icon 10 Capture mode To select a flash mode: 1. Go to the Capture mode. English 2. Keep pressing to toggle among different flash modes and select a desired option. Focus mode Icon Mode Description Auto focus Adjusts focus automatically. Macro Used when capturing images at a close distance. Pan Focus Used when you want to capture the subjects in a certain focus range. Infinity Used when capturing images at long distance. To select the focus mode: 1. Go to the Capture mode. 2. Keep pressing to toggle between Auto focus and focus modes. Image quality Icon Mode Description Super Fine Best image quality with the lowest compression rate. File size is the largest. Fine Better image quality with medium compression rate. File size is medium. Normal Good image quality with the highest compression rate. File size is the smallest. To select an image quality level: 1. Press 2. Press 3. Press > Image Quality. or to select a setting. to confirm setting. Downloaded from ManualsCamera.com Manuals Capture mode 11 Battery status Description English Icon Battery power is full. Battery power remains adequate. Battery power is low. Battery power is very low. You should replace the battery ASAP. Setting EV EV (Exposure Value) lightens or darkens the entire image. Adjust EV when the brightness between the subject and the background is not balanced, or when the subject occupies only a small part of the picture. To select an EV: 1. Press 2. Press > EV. or to select an EV from the EV bar, and then press to confirm setting. White balance Compensates for color temperatures in different lighting conditions, so white and other colors can display properly when you capture images. Icon Mode Description Auto Adjusts white balance automatically. Daylight Used in bright daylight conditions. Cloudy Used in twilight or shady conditions. Tungsten Used when subjects lit by tungsten (incandescent) lighting. Fluorescent H Adjusts for fluorescent lighting. Corrects the green hue of fluorescent lighting. Ideal for indoor photos under fluorescent lighting without a flash. Fluorescent L Manual Used when you want to manually adjust white balance in a particular lighting condition. Downloaded from ManualsCamera.com Manuals 12 Capture mode To select white balance: 1. Press > White balance. English 2. Press or to select an select a white balance option. (When selecting the manual mode, you must first point the adjustment frame shown on the screen at a blank sheet of white paper or something similar, and press the Shutter for the camera to detect proper colors.) 3. Press to confirm setting. ISO ISO configures the camera’s sensitivity to light. The higher the ISO value, the brighter picture you can take in a low-light environment. Yet, you may see more noise in the picture as you increase the ISO value. Icon Description Automatically sets the ISO value. Equivalent to color ISO 50/100/200 film. Used for outdoor photography in bright sunlight. Equivalent to color ISO 400/800/1600/3200 film. Used it in a low-light environment or where the flash light is not allowed. ISO 3200 for resolution 3M or under only. To select an ISO value: 1. Press 2. Press > ISO. or 3. Press to select an ISO Value. to confirm setting. AE metering Icon Mode Matrix Description Detects the exposure based on multiple points in the subject area. Cent. Weight (Center Weight) Detects the exposure of the entire shooting screen, but gives more importance to the values near center. Spot Detects the exposure based on the center spot in the subject area. To select an AE metering option: 1. Press 2. Press 3. Press > Metering. or to select an AE metering option. to confirm setting. Downloaded from ManualsCamera.com Manuals Capture mode 13 Effect Icon Mode Description Normal No effects are added. Vivid Adds an effect with very clear and bright color tones. Sepia Adds an effect with dark reddish brown color tones, so the image or video looks as if it is old. B/W (Black and White) Adds an effect with monochromatic color tones. Vivid Red The image becomes reddish. Vivid Green The image becomes greenish. Vivid Blue The image becomes bluish. To select an effect: 1. Press 2. Press 3. Press > Effect. or to select an Effect option. to confirm setting. Shooting mode Select one of the following shooting modes to fit your shooting condition. Icon Mode Description Auto Mode The camera automatically decide most settings, so you can capture images with ease. Smart Scene Automatically selects a shooting mode based on the current shooting environment. Program You can set the shooting parameters manually. Aperture Priority You can choose an aperture value, while the shutter speed is automatically determined by the lighting condition of the subject. Shutter Priority You can choose a shutter speed, while the aperture value is automatically determined by the lighting condition of the subject. Manual Lets you set both aperture and shutter speed manually. Downloaded from ManualsCamera.com Manuals English Adds color filter effects to the image or video you want to capture. 14 Capture mode English Movie Record Captures videos with sound. When viewing the captured video file later, you can see a unique icon that appears on the screen and indicates that this is a video file. Smile Catch Automatically takes a shot when a smile is detected. Blink Detector Warns of eye blinks if detected & lets you decide whether to save the image file. Portrait Makes the subject (usually a person) stand out with smooth and natural-looking skin tones. Landscape Captures a scene in the distance with the focus area set to infinity and a lower aperture value. The maximum depth of view can also be achieved. Sports Uses a high shutter speed to capture objects in motion. Backlight Increases exposure (by turning on the flash) when light illuminates the subject from behind. Night Scene Captures photos in a low-light environment, such as in the evening or at night. Night Portrait Shoots night scenes and portraits clearly. Please keep the camera steady or use a tripod while using this mode. Self Portrait Takes a self portrait with at least one face in a confined area. Love Portrait Takes a self portrait with at least two faces in a confined area. Pre-composition Captures the background first, so the helper can use it to take the final shot. Beach Captures photos in a brightly lit environment, such as beaches. Snow Used under a very bright light environment such as snow scenes. Fireworks Adds exposure time to shoot firework trails. Please keep the camera steady or use a tripod while using this mode. Building Enhances lines & contracts to highlight the sense of the three dimensions (3D) for a building. Soft Flowing Water Uses a low shutter speed for motion blur. Please keep the camera steady or use a tripod while using this mode. L. Portrait Focuses on the subjects and keeps the background (Landscape Portrait) blurred slightly. Web Auction Reduces the file size for faster internet upload. Files saved in this mode are stored under the XXX_AUCT directory (XXX are numbers). Soft Skin Enhances the tone of skin so that the facial skin appears smooth. Downloaded from ManualsCamera.com Manuals Food Captures food by enhancing color brightness and giving more vivid colors. Museum Used when taking a picture of subjects in a place where flash is usually prohibited. Flash is always off. Candle Light Makes a picture look warm, and thus captures the mood under candle light source. Flash is always off. Party Captures the party atmosphere usually under indoor light source. Text Improves clarity & contrast when taking a close-up picture of documents. Child Increases sensitivity and emphasizes children's skin tones. Sunset Captures the warmth and atmosphere (represented by hue) of sunrise or sunset. Flower Uses the macro mode to enhance lines & saturation, and thus highlight flower details. Pet Takes a clear picture of a pet by showing its correct fur color. Voice Rec. (Voice Record) Captures background sound only (no images or videos). When listening to the captured audio file later, you can see a unique icon that appears on the screen and indicates that this is an audio file. • ISO, Metering, and White Balance are not available in some shooting modes like Auto Mode. You must select another mode like Manual to enable these options. • When S.S.F. is turned on, adjusting ISO is unavailable no matter which shooting mode you select. To select a shooting mode: 1. Press > > Shooting Mode. 2. The currently selected shooting mode shows. Press desired option. , , When you are selecting from different shooting modes, press explanation of each shooting mode. Press you are done. 3. Press , or to locate another for detailed to close the shooting mode description when to confirm setting. Downloaded from ManualsCamera.com Manuals English Capture mode 15 16 Capture mode Aperture Priority English Aperture priority is often used when shooting static subjects or emphasizing the depth of field. In general, use a smaller aperture if a greater depth of field is needed. To adjust aperture value: 1. Go to the Capture mode with Aperture Priority mode selected. 2. Press / to adjust the aperture value. Shutter Priority Shutter priority is often used when shooting moving subjects. In general, use a shorter shutter speed to catch a fast-moving object. To adjust shutter speed in Shutter Priority: 1. Go to the Capture mode with Shutter Priority mode selected. 2. Press / to adjust the shutter speed. Manual mode You can choose the aperture value and shutter speed in Manual mode. To adjust values in Manual mode: 1. Go to the Capture mode with Manual mode selected. 2. Press / to adjust the aperture value or shutter speed. Press the two options. to toggle between When toggling between Av/Tv, press the shutter halfway for exposure metering. Drive mode Icon Mode Description Standard Takes one picture at a time. Self-timer Automatically takes a picture after 2 or 10 second delay. This mode is useful when you want to be part of the picture. Double Performs delay and capture twice: 1. Performs a 10-second delay, then captures the image. 2. Performs another 2-second delay then captures the image again. Burst Continuously takes pictures as long as you keep pressing the Shutter. The flash is always off in this mode. To select a drive mode: 1. Go to the Capture mode. 2. Press > 3. Press or 4. Press > > Drive Mode. , and then select a desired option. . Downloaded from ManualsCamera.com Manuals Capture mode 17 The AEB function automatically takes 3 pictures with slightly different settings in the shutter speed or the aperture value. To turn on/off AEB: 1. Go to the Capture mode. 2. Press > 3. Press or 4. Press > > AEB. , and then select or . . AF area Icon Mode Description Face Tracking Focuses on the position of faces (max. 8 faces) simultaneously. Wide Focuses on a wide range of multiple objects. Center Focuses on the center area of the objects. To select an automatic focus area: 1. Press > 2. Press or 3. Press > > AF Area. , and then select a focusing area. . While using the Face Tracking function, point the camera to where the people (your subjects) are located. Focus frames of Face Tracking will automatically detect faces (maximum 8) and show on the LCD screen. 4. Press the shutter to capture the image. • Due to environmental factors such as lighting, the number of detected faces might be different from that of the actual faces. • To achieve the best result, ask your subjects not to turn their faces partially away from the lens. AF Assist Lamp This function emits red light allowing the camera to focus easily when half pressed the Shutter button. To turn on/off AF Assist Lamp: 1. Go to the Capture mode. 2. Press > 3. Press or 4. Press > > AF Assist Lamp. , and then select . or . Downloaded from ManualsCamera.com Manuals English Auto Exposure Bracketing (AEB) 18 Capture mode Setting sharpness, saturation and contrast Adjusts how colors appear in the pictures by setting sharpness, saturation, and contrast. English To set sharpness, saturation, or contrast: 1. Press > 2. Press or 3. Press > , and then select Sharpness, Saturation or Contrast. , and then select High, Normal, or Low. . Digital Zoom The digital zoom enlarges or shrinks the image using a software process. Icon Mode Description Wise Zoom Reduces the image size, and thus increases the effective zoom length without sacrificing image quality. Digital Zoom Turns on the digital zoom feature. OFF Turns off the digital zoom feature. To select a digital zoom: 1. Press > 2. Press or 3. Press > > Digital Zoom. , and then select a digital zoom type or . . Date Stamp Imprints the date when a picture was taken on the picture itself. To set the date stamp: 1. Press > 2. Press or 3. Press > > Date Stamp. , and then select Date, Date & Time, or . . Instant Review This feature displays the still image that just recorded for 1 second. To set the Instant Review: 1. Press > 2. Press or 3. Press > > Instant Review. , and then select or . . During instant review, half press the shutter to return to the capture mode. Downloaded from ManualsCamera.com Manuals Capture mode 19 Automatically enhances the brightness and contrast in the darker areas of a picture to improve overall exposure quality. To set Auto Z-Lighting: 1. Press > 2. Press or 3. Press > > Auto Z-Lighting. , and then select or . . Smart Scene Automatically selects the best shooting mode from Backlight , Night Scene , and Macro , Landscape , Portrait . 1. Press > > Shooting Mode and select . 2. Press the shutter halfway to set automatic focus. The selected shooting mode is displayed in the top left corner of the screen. 3. Press the shutter to capture an image. Blink Detector Automatically detects blinking when you capture an image. 1. Press > > Shooting Mode and select . 2. Press the shutter to capture an image. If blinking is detected, a warning message appears on the screen. 3. Press / to save or discard the image, and then press or to confirm. Self Portrait / Love Portrait Takes a self portrait for at least one face (Self Portrait) or for at least two faces (Love Portrait). 1. Press > > Shooting Mode and select or . 2. Once face(s) are detected, the camera will automatically take a picture after a two-second countdown. During the countdown, you can press the shutter to cancel the countdown. The camera will then start detecting face(s) again. 3. The camera continues to detect face(s) and take more pictures by repeating Step 2. This face tracking will automatically stop if no face(s) are detected. Downloaded from ManualsCamera.com Manuals English Auto Z-Lighting 20 Capture mode Pre-composition English Captures the background first for positioning the final image. Ideal for asking others to take your photo. 1. Press > > Shooting Mode and select . 2. Press the shutter to capture the background. The bottom section of the screen displays the captured background image. 3. Use the captured background image to frame the composition, and press the shutter to capture the final image. Smile Catch Captures an image when the subject smiles. 1. Press > > Shooting Mode and select . 2. The camera is tracking the face of your subject (a white frame shows). 3. Press the shutter to activate smile tracking, and then release the shutter immediately. The camera is now tracking the smile of your subject (a green frame shows). 4. Once a smile is detected, the camera instantly takes a picture. 5. The camera continues to detect smiles and takes more pictures (Step 4 is repeated; maximum 6 pictures and then Smile Catch will automatically stop). To stop the smile tracking at anytime, press the shutter. • The camera will also automatically stop smile tracking if your subject leaves your composition area. • Face tracking (one face only) is always on in the Smile Catch mode. Movie Record mode settings Icon Description Video Format: 16: 9 (848 x 480), VGA (640 x 480), QVGA (320 x 240), or Web sharing (640 x 480). Videos captured in Web sharing mode are stored under the XXXUTUBE directory (XXX are numbers) with the file size limited to 100 MB or 10 minutes per video file (video recording will automatically stop). White balance: Auto, Daylight, Cloudy, Tungsten, Fluorescent H, Fluorescent L, or Manual. See "White balance" on page 11 for more details. AE metering: Matrix, Center, Spot. See "AE metering" on page 12 for more details. Effect: Normal, Vivid, Sepia, B&W, Vivid Red, Vivid Green, Vivid Blue. See "Effect" on page 13 for more details. Downloaded from ManualsCamera.com Manuals Other settings 21 To select a Movie Record option: > see the icon 2. Press 3. Press > Shooting Mode > Movie Record mode, and make sure you can on the screen. English 1. Press , and then select an option. or 4. Press to select a setting. to confirm setting. Other settings Press > , and then select an option. Option Sounds Power Saving Description [Startup] Sets a type of the startup sound. [Shutter] Sets the shutter sound on and off. [Operation] Sets the operation sound on and off. [Volume] Adjusts the volume of the shutter sound, startup sound, operation sound and playback sound. [1 min.] For power conservation, the camera automatically enters the standby mode after it has been idle for a period of time. (Press any key to resume.) [3 min.] [5 min.] [Off] Date/Time The camera remains on when idle. Sets the date and time. Select a language for display menus and other information. File Numbering TV Format [Series] Stores the most recently used file number regardless of deleted files or a change of memory card. This is useful for avoiding the file name duplication when images are downloaded to a computer. [Reset] Resets file numbering each time the memory card is changed. You can review images on a television with the supplied AV cable. [NTSC] America, Japan, Taiwan and others [PAL] China, Europe, Oceania, and others TV Format should be set to either NTSC or PAL depending on your region. For details about which system should be used, check with your local authorities. Downloaded from ManualsCamera.com Manuals 22 Other settings LCD Brightness English LCD Saving Manage Memory Reset All [High] The LCD brightness is increased. [Normal] The LCD brightness remains at the default value. [Off] The LCD screen remains bright when the camera is idle. [On] For power conservation, the LCD screen is automatically dimmed after the camera has been idle for 5 seconds. (Press any key to resume.) [Format] Formats the internal memory or the memory card. [Copy to Card] Copies files from the internal memory to the memory card. Resets the entire menu and button operation settings to initial default. The following settings do not change after Reset All: Date & Time setting Language setting TV Format setting Downloaded from ManualsCamera.com Manuals Playback mode 23 Playback mode to enter the Playback mode. 01.15.2009 08:05 English Press 10/115 IMG 0064.JPG 1.25MB 1/200 F2.8 12M EV ISO 2.0 400 • When the camera is off, press and hold for at least one second to enter the Playback mode. • In the Capture mode, press to enter the Playback mode. • In the Playback mode, press or the Shutter to switch to the Capture mode. • While pausing video playback, you can press the shutter to capture the video frame as a still image in the VGA format. Item Description Page reference 1 Indicates that the camera is in the Playback mode. -- 2 Indicates that the file is protected and cannot be deleted. 26 3 Indicates this file has a voice memo or the file is an audio file. 26 4 Indicates the file is marked for printing. -- 5 Displays the shooting parameters when you took the -- picture or playback controls. Press to toggle between different displayed information. 6 Date and time when the file was created. -- 7 File number -- 8 Histogram -- 9 File name, file size, shutter speed, and f-number -- Downloaded from ManualsCamera.com Manuals 24 Playback mode Options for playback and editing English When the camera is in the Playback mode, press also select any of the following options. , or to move to different files. You can Enlarging an image Magnifies an image, so more details can be seen. To enlarge an image: 1. Press . 2. Press 3. Press , or to move to the image you want to enlarge. to zoom-in or to zoom-out. 4. Press 5. Press , , , or to move to the area you want to see. to return to the normal viewing size. Viewing multiple files at a time Shows up to 9 files at a time on the screen. To view multiple files: 1. Press > . Maximum 9 files (shown in thumbnails) are displayed on the screen. Press to select a file, and then press or , , , or to view it in its normal viewing size. Playing back video clips View recorded video clips in the playback mode. To view a video clip: 1. Press . 2. Press , or to move to the video clip you want to view. 3. Start playing back. • Press to start playing the video clip. • Press to stop the video clip, or press to pause it. Press again to resume. • During video playback, press to fast forward or press to rewind. • While pausing video playback, you can press the shutter to capture the video frame as a still image in the VGA format. • While pausing video playback, you can view the video frame by frame. Press to fast forward one frame, or press to rewind one frame. Press and hold to fast forward frame by frame continuously, or press and hold to rewind frame by frame continuously. Downloaded from ManualsCamera.com Manuals Playback mode 25 Adjusting the playback volume To adjust the playback volume: 1. Turn the power on, and set the camera to the playback mode. 2. Press or to select a video clip, audio clip, or voice memo that you want to playback. 3. Adjust the volume. • Press to increase the volume. • Press to decrease the volume. The volume can be set during play/pause, but not during rewind/fast forward. Slideshow Sets the time interval for presenting a series of captured image and video files (first frame only). To play a slideshow: 1. Press > > > Slideshow > or . 2. Change the slideshow settings. • Use the four-way control to set one of the following slideshow effects: • Horizontal: Changes files from right to left. • Shrink: Changes files from outside to inside. • Fade: Changes files using a fade-out effect. • Vertical: Changes files from bottom to top. • Random: Changes files randomly using the above four effects. • You can set the interval between 1/3/5/10 seconds. 3. Playing the slideshow. • Press to start slideshow. • If you want to pause it at any time, press stop the slideshow, press . . Press again to resume playback. To Deleting files Removes selected or all files. To delete files: 1. Press > > > Delete > or . 2. Select whether to delete this selected file, other selected, all files, or voice memo only, and then press . Downloaded from ManualsCamera.com Manuals English Increase or decrease the volume of video clips, audio clips, or voice memos. 26 Playback mode Protecting files Prevents selected files from accidental removal. English To protect files: 1. Press > > > Protect > or . 2. Select whether to protect this selected file, other selected, or all files, and then press You will then see the icon indicating the file is protected. . You can remove the protection anytime by following the same procedure as shown above. Note that in Step 2 the on-screen instruction will ask you how you want to remove the protection. Red-eye Removal The Red Eye Correction function is used to reduce red eye in captured images. This function is only available for still images. Red eye correction can be applied to an image several times, but the quality may gradually deteriorate. 1. Press > or 2. Press > 3. Press to move to the image you want to apply Red-eye Removal. > Red-eye Removal > or . to confirm the change and save the image file. Voice memo Inserts a voice annotation to an image file. To record a voice memo: 1. Press > 2. Press or > to move to the image you want to add a voice memo. > Voice Memo > or 3. Select Start > to start recording your voice. 4. Select Stop > to stop recording. . To play back a voice memo: 1. 2. 3. 4. Press Press Press Press to play the voice memo. to pause the playback. to resume the playback. to exit playback. Photo Effect You can add special effects to your images. Icon Option Description Normal No effect is added to the image. Sepia Recorded image will be stored in a sepia tone. B/W Convert image to black & white. Downloaded from ManualsCamera.com Manuals Negative Mosaic Colors become the opposite of what they were in the original image. Applies a mosaic tile effect to the image. Vivid Red The image becomes reddish. Vivid Green The image becomes greenish. Vivid Blue The image becomes bluish. To add a special effect to an image: 1. Press > or 2. Press 3. Press > , or 4. Press to move to the image you want to add an effect to. > Photo Effect > or . to select the effect. to confirm the change and save the image file. Z-Lighting Enhances the brightness and contrast in the darker areas of a picture to improve overall exposure quality. To apply Z-Lighting to an image: 1. Press > or apply Z-Lighting. to move to the image you want to 2. Press > Z-Lighting > 3. Press > , or 4. Press or . to adjust the Z-Lighting value. to confirm the change and save the image file. Rotating an image Changes the orientation of an image. To rotate an image: 1. Press > 2. Press or > to move to the image you want to rotate. > Rotate. 3. Select Rotate and press to rotate the image. 4. Repeat step 3 until desired orientation is achieved. 5. Select Exit to save and exit the function. Trimming Crops part of an image file, reduces the image size, and overwrites the image file or saves it as another new file. To trim an image: 1. Press 2. Press > or > to move to the image you want to trim. > Trim > or . Downloaded from ManualsCamera.com Manuals English Playback mode 27 28 Playback mode 3. Press reduce. English 4. Press or , to select the target image size (8M, 5M, 3M, VGA) to which you want to , 5. Press , or to locate the area to trim. to confirm the change and save the image file. You cannot trim images in the size of 3:2, 16:9, or VGA. Resizing Changes an image file to a smaller size, and overwrites the image file or saves it as another new file. To resize an image: 1. Press > or 2. Press 3. Press > or 4. Press to move to the image you want to resize. > Resize > or . to select the target image size to which you want to reduce. to confirm the change and save the image file. Startup image Sets the welcome screen when the camera is powering on. To select a startup image: 1. Press > 2. Press or 3. Press . > Startup Image > or . to select an image. DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. To set up DPOF: 1. Press > > DPOF 2. Press or to select Single, then press . • To set the DPOF setting for all images in a time, select All in this step. • To reset all DPOF settings to initial default, select Reset in this step. 3. Press or to select the image you want to print out and press number of copies, then press . Downloaded from ManualsCamera.com Manuals or to specify the Working with computer and AV system 29 Bundled software The camera offers the following programs on a CD. ArcSoft PhotoImpression 5 Combines photo editing with creative enhancement and sharing tools that maximize your digital media experience. ArcSoft VideoImpression 2 Creates multimedia presentations by combining photos and video clips with audio, text and scene transitions. To install these programs, see the information supplied with the CD. Connecting the camera to a computer You can connect the camera to a PC or notebook to transfer, view, print, or edit files. To connect the camera to a computer: 1. 2. 3. 4. Connect the end of the smaller plug of the USB cable to the camera. Connect the other end of the USB cable to an available USB port on your computer. Turn on the camera. A Removable Disk icon appears in My Computer. Click this icon to access the files in your camera. • When connecting the camera to a computer, it is necessary to install a battery into the camera. • When connecting the camera to a computer, please use the original accessory of the USB cable to avoid possible system conflicts and damage to the camera. Connecting the camera to an AV system You can play files in your camera from an AV system such as TV or projector. To connect the camera to an AV system: 1. Connect the end of the smaller plug of the AV cable to the camera. 2. Connect the yellow video plug and the white audio plug of the AV cable to a video-input jack and an audio-input jack (left channel) on your AV system. 3. Turn on the AV system, and then switch to the AV source connecting to the camera. 4. Turn on the camera. 5. Follow the on-screen instructions to operate the camera via the TV or projector screen. Downloaded from ManualsCamera.com Manuals English Working with computer and AV system 30 Working with computer and AV system Printing images English In addition to printing images by connecting the camera to a printer via a computer or bringing the memory card (if available) to a photo-processing center, you can choose to print using PictBridge. Printing with PictBridge You can directly print images by connecting your camera to a PictBridge-compatible printer without using a computer. To print images from a PictBridge-compatible printer: 1. Connect the end of the smaller plug of the USB cable to the camera. 2. Turn on the printer. Wait for a while until it finishes starting up and is ready to print. 3. Turn on the camera. 4. Press > > Printer > or . 5. Connect the other end of the USB cable to an available USB port on your printer. 6. Follow the remaining on-screen instructions in your camera and/or printer to complete printing. • The above procedure may vary depending on the printer type you are using. • If you connect the camera to your printer while the printer is still starting up, the camera will be automatically turned off. • Failure to follow the above procedure will make the camera show an error message. Please disconnect the camera and the camera will be automatically turned off. Downloaded from ManualsCamera.com Manuals Troubleshooting and service information 31 If your camera cannot operate normally, see the frequently encountered problems and solutions listed below. If the problem persists, contact your nearest service center or technical support. Problem The camera cannot power up. Cause The battery has no power. The battery power is draining quickly. Solution There is no battery or the battery is Insert the battery correctly. not inserted correctly. Recharge the battery. The external temperature is extremely low. -- Many shots are being captured in dark places, requiring a flash. -- The battery was not fully charged, Fully charge the battery and discharge it for at least one or it has not been used for an extended period of time after being complete cycle before use. charged. The battery or camera is warm. The camera or flash was used continuously over a long period of time. -- The flash does not The camera flash is turned off. fire or recharge. The light source is sufficient. Set the flash to Auto Flash. Even though the flash fired, the image is dark. The distance to the subject is greater than the flash's effective range. Get closer to the subject and shoot. The image is too bright or too dark. The exposure is excessive or inadequate. Reset exposure compensation. I cannot format a memory card. The memory card is writeprotected. Remove the write protection. I cannot download images from the camera to my computer. -- End of the memory card life. Insert a new memory card. The free space on the hard disk of your computer is insufficient. Ensure that the hard disk has enough space for running Windows and that the drive for loading image files has free space equal to or greater than the memory card in the camera. There is no power being supplied to the camera. Recharge the battery. Downloaded from ManualsCamera.com Manuals English Troubleshooting and service information 32 Troubleshooting and service information English The camera does not shoot even when pressing the shutter button. The battery is running low. Recharge the battery. The camera is not in the Capture mode. Switch to the Capture mode. The shutter button was not pressed Press the shutter button all the way all the way down. down. The internal memory or memory Load a new card or delete card does not have any free space. unwanted files. The flash is recharging. Wait until the flash mode icon, indicated on the screen, stops flashing. The camera does not recognize the Format the memory card before the memory card. initial use or before using with another camera. I cannot print The camera is connected to the images with printer when the camera is PictBridgepowered off. compliant printers. Turn on the camera, select PictBridge, and then connect to the printer. Technical support For technical assistance, free driver updates, product information, and news releases, visit the following web site: http://www.BenQ.com Downloaded from ManualsCamera.com Manuals Specifications 33 Sensor Sony 12.0 Mega Pixels, 1/2.3 inch CCD Zoom Optical: 3X Digital: Up to 5X(Preview) / Up to 12X(Playback) Lens f = 6.3 (W) ~ 18.9 (T) mm F: 3.1 (W) ~ 5.6 (T) (f = 35.5mm ~ 106.5mm, 35mm equivalent) Focus Range Normal: 40cm ~ Infinity Macro: W=10 ~ 60cm;T= 40cm ~ 60cm LCD 3.0" LCD 230k pixels Image Resolution 12M (4000 x 3000) / 3:2 (4000 x 2672) / 8M (3264 x 2448) / 5M (2592 x 1944) / 3M (2048 x 1536) / 16:9 (1920 x 1080) / VGA (640 x 480) Movie Mode 848 x 480 (16:9) / 640 x 480 / 320 x 240 Continuous recording with sound Shutter Speed 1/2000 ~ 1 sec (Night mode 15 sec.; Fireworks 8 sec.) White Balance Auto, Daylight, Cloudy, Tungsten, Fluorescent H, Fluorescent L, Manual Exposure -2 ~ +2 EV (0.3EV / step) ISO Auto 50 / 100 / 200 / 400 / 800 / 1600 / 3200 (3M or below) Flash Auto Flash / Auto Anti Red-eye / Force On / Slow Sync / Force Off Drive mode Off / 10 sec. / 2 sec. / Double / Burst Power Source 720mAh Rechargeable Li-ion Battery CIPA approx. 220 base on bundle Li-ion battery Storage Type Built-in approx. 9MB (Usable) 16GB SD/SDHC card compatible File Format Still Image: JPEG (EXIF 2.2 compatible) DCF compatible; Support DPOF; Video: MJPEG; Audio: WAV Dimensions / Weight 95 x 57 x 17.6 mm 120g (w/o battery & SD card) Interface Digital output: USB 2.0 compatible Audio / Video output (NTSC/PAL) PictBridge compatible Color Black Accessory USB Cable / AV Cable / Software & UM CD / Quick Guide / Hand Strap / Pouch / AC Adapter / Li-ion Battery / Charger All information, designs, and specifications are subject to change without prior notice. Downloaded from ManualsCamera.com Manuals English Specifications