Download Sharp VL-Z500H Specifications

Transcript
Deleting All Stored Images
3
You can delete all stored images on a card
in one operation.
Notes:
• Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
• If you want to keep some images on the card,
first delete-protect them (see page 83), and
then perform the procedure below.
1
In Card Playback mode, press the
DISPLAY/MODE SET button until the
mode screen appears.
2
Press l or m on the Operation
button to select “DELETE ALL”, then
press the centre of the Operation
button.
Press l or m to select “YES”, then
press the centre of the Operation
button.
• To cancel the setting, select “NO”.
4
Press the DISPLAY/MODE SET
button to finish the setting.
Notes:
• The protected images cannot be deleted.
Cancel the protection setting to delete the
image (see page 83).
• If a print order is assigned to deleteprotected images and you perform the
procedure above, the print order will cancel
(the protection setting will not cancel).
• It may take several seconds to delete all
images from the card.
• Do not turn the power off while deleting
images.
• The DELETE ALL? indicator appears.
F U L L MULT I
P I C. EF F ECT
D E L E T E ONE
DE LE TE ALL E X E CUT E
1
2
3
4
5
6
DE L E T E ALL ?
NO
YES
SE L ECT S E T
1 0 0- 0 0 0 1
NORMA L
Digital Still Camera Features
DELETE ALL? indicator
85
VL-Z500H-082-095
85
04.2.6, 7:49 AM