Download Makita ANGLE SANDER 9040L Specifications
Transcript
Compressors, Air Tools & Spraying Air Compressors The compressors listed here have been carefully selected to form a complete range covering the majority of home, semiprofessional and professional users. Whether it be airbrushing, spraying, stapling/nailing, screwdriving, drilling or a host of other applications there is a compressor here to fit the bill. All of our compressors are manufactured to high quality standards and will give excellent performance and reliability. All the receivers are fully tested and conform to all current safety standards. Each unit comes with a full 12 months warranty and all the receivers are individually certificated. The range is backed up by an excellent spares and after sales service. We are often asked for advice from customers when choosing a compressor. Our two main pieces of advice are firstly, always look at the free air delivered by the compressor, not the piston displacement and, secondly make sure that the output of the compressor exceeds the consumption of the tool or tools. Some manufacturers quote just the piston displacement and this can mislead the unwary into believing they are purchasing a compressor with a larger capability than they are actually getting. Provided that the free air delivery from the compressor exceeds the requirement of the air tool you should not have the problem of running out of air halfway through a job. The alternative, of course, is to buy the biggest compressor at the outset on the basis that you will then have sufficient capacity for larger tools in the future. Compressor Oil Specialist compressor oil which meets the demands of all of our compressors. High viscosity, low carbon forming, anti-corrosion agent and conforms to all latest DIN specifications. Supplied in a one litre bottle. Owners of Bambi oil lubricated compressors are advised to consider the Bambi Synthetic Oil 951512 3 Inc.vat Ex.vatCode Compressor Oil 1 litre £7.45 £6.21200610 Bambi Synthetic Oil Synthetic compressor oil for all Bambi oil lubricated compressors. Greatly enhances the lubrication protection levels of these compressors, ensuring long service life and minimal oil consumption. Inc.vat Ex.vatCode Synthetic Compressor oil 1 litre £36.96 £30.80951512 £109.96 Ex.vat: £91.63 Code: 501083 £119.95 Ex.vat: £99.96 Code: 951816 Axminster Air AWC10HP Compressor A small, direct drive, oil lubricated, ducted air cooled, portable compressor. Great in the workshop or around the home for low volume air tools such as air staplers and nailers, air brush painting, occasional tyre inflation etc. Quite a robust little unit with a cast iron cylinder for long life. Twin pressure gauges monitor receiver and output pressures. Supplied with four rubber feet, top grab handle for easy mobility, output pressure control valve and a 1/4” BSP female quick release fitting. 128 Compressors.indd 128 Axminster Air AWC20HP Compressor The AWC20HP is an economically priced single cylinder oil lubricated unit with a 1.4kW high efficiency motor. The cast iron pump cylinder provides long term durability. Producing 5cfm @ 40 psi and 4cfm @ 90 psi compressed air delivery into a 24 litres air receiver. Fitted with wheels and a grab handle for easy mobility. Receiver and outlet pressure gauges are fitted along with an outlet pressure regulator. It is suitable for a whole range of general workshop uses such as small size nailing and stapling, riveting, greasing, dusting, tyre inflation, airbrushing and touchup spraying. The only jobs which are beyond its capabilities are the use of the larger continuously running tools such as sanders, large spray guns, drills and polishers, all of which will need a more powerful compressor coupled to a larger capacity tank. The outlet is fitted with a 1/4” BSP female quick release fitting. Filters & Regulators A range of industrially-rated air control units for lubricating, filtering and controlling the air supply from the compressor to the air tool. They all have mounting brackets supplied and the filter units have a spring loaded drain vent at the bottom. N.B. All the units have 3/8” BSP female tappings. Suitable adaptors can be found under Threaded Airline Fittings. Inc.vat Ex.vatCode Filter/Reg c/w Gauge £48.96 £40.80800405 Air Filter £29.46 £24.55800404 In Line Disposable Air Filters These in-line filters, with their centrifugal action and built in filter, will make all the difference to a sprayed finish. Used in conjunction with a tank mounted air filter they should give up to 10 days of trouble free spraying. 1/4” BSP female fitting at one end, 1/4” BSP male at the other. Please note that the filters are sold in pairs. Inc.vat Ex.vatCode In-line Filters (2) £4.96 £4.13010033 Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95 26/11/2014 10:15 Air Compressors Axminster Air AWC30HP Compressor A compact yet powerful unit, the AWC30HP, features a twin cast iron cylinder oil lubricated and ducted air cooled pump, which is directly driven by a 2.2kW motor. The 50 litre tank is very quickly re-charged and has a variable output pressure regulating valve and gauges for monitoring output pressure and tank pressure. Very portable as it is supplied with two decent wheels and a convenient grab handle. Able to drive all air tools except the highest air demanding sanders and spray guns, this is an excellent medium sized machine for most home workshops, arts and crafts, cabinet making and general woodworking. Supplied with a 1/4” BSP female quick release fitting. £239.95 Ex.vat: £199.96 Code: 501274 Axminster Air AWBD3050 Compressor A traditional belt drive workshop compressor, built for hard work over long periods. Quiet running and easy to move around, this machine will suit many workshop applications. Its 50 litres receiver is ideal for continuous nailing, stapling, running small sanders, small batch spraying and many other tasks. With oil lubricated cast iron cylinders for long pump life, this machine will give many years of good service. It is equipped with a receiver pressure gauge, output pressure gauge and out regulator valve. Includes a 1/4” female quick release fitting. £389.95 Bambi BB24V Compressor Ex.vat: £324.96 Code: 340648 With noise levels around 40dB(A) and almost no vibration the Bambi BB24V can be located anywhere in the workshop without causing any intrusion. The vertical design takes up very little space whilst the 24 litre receiver is charged to 8 bar ensuring plenty of air is available for nailing, stapling, airbrushing and operating pneumatic systems. Standard features: Internally coated air receiver, Clearview oil level check, Easy to use oil filler plug and 10 micron outlet filter and adjustable pressure regulator. A 3 year receiver warranty ensures peace of mind. A favourite for educational work, exhibitions stands and front of shop use, indeed anywhere compressed air is required, silently. £309.96 Ex.vat: £258.30 Code: 501275 3 Axminster Air AWBD30100 Compressor Sharing the same motor and pump unit from the AWBD3050 compressor, this model has a 100 litre receiver tank to give twice as much stored air capacity. This allows some demanding tasks that need a greater volume of high pressure air to be carried out. The same facilities as found on the AWBD3050 model are also found here. i.e. receiver and output pressure gauges, adjustable output pressure, decent sized pneumatic tyres and a grab handle. Whilst not as compact as the 50 litre version, the extra capacity can be very handy at times. £359.95 Ex.vat: £299.96 Code: 501276 Comparison Chart - Air Compressors AWC10HP AWBD30100I AWC30HP AWBD3050I BB24V ModelAWC20HP Hobby Trade Hobby Trade Industrial RatingHobby 750W(230V, 1ph) 1.4kW (230V) 2.2kW (230V) 2.2kW (230V) 2.2kW (230V) 375W (230V) Power Delivered @ 40psi - 3.5cfm, @ 40psi-5.0cfm, @ 40psi - 5.7cfm, @ 40psi-7.4cfm, @ 40psi - 5.7cfm, @ 1 Bar - 1.4cfm, Free Air @ 90psi - 2.4cfm @ 90psi-4.0cfm @ 90psi - 4.5cfm @ 90psi-5.7cfm @ 90psi - 4.5cfm @ 5 Bar - 1.2cfm, @ 8 Bar - 1cfm 115psi (8bar) 115psi (8bar) 115psi (8 Bar) 115psi (8 Bar) 115psi (8 Bar) 115 psi (8bar) Max Pressure 96dB(A) 95dB(A) 96dB(A) 40dB Noise94dB Level70dB Volume 6 litres 24 litres 100 litres 50 litres 50 litres 24 litres Receiver 300ml 100ml 1,200ml 700ml 1,200ml 600ml Oil Capacity 10 Amps 13 Amps 10 Amps 10 Amps 13 Amps Supply Requirements230V L x W x H 515 x 240 x 465mm 570 x 300 x 590mm 1,250 x 500 x 740mm 950 x 390 x 690mm 1,050 x 460 x 740mm 400 x 400 x 540mm Overall 22kg 14.5kg 79kg 40kg 58kg 28kg Weight Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/compressors Compressors.indd 129 129 26/11/2014 10:16 Air Hoses The best way to connect up your compressed air system is to use bayonet quick release airline fittings at both the compressor and tool ends of the air hose; the fittings are easy and safe to use and allow for quick interchange of tools and hoses. The diagram below shows the recommended layout of the system please note that the spring loaded quick release fittings should be fitted to the compressor and to the tool end of the hose so that the air is contained when either the hose or the tool are disconnected. The swivelling fittings, 410251 male and 410250 female, are highly recommended for fitting to the air tool, as they give greater flexibility in operating the tool as well as preventing snags and twisted airlines. Key to Fittings: 8mm Bore Air Hose 8mm bore nitrile hose with crimped-on 1/4” BSP male 100311 100312 100313 100314 100315 fittings on both ends in a A range of airline fittings that can be used to make up special choice of two lengths. hoses or to set up your compressor with quick release airline Inc.vat Ex.vatCode fittings. Air Hose 8mm x 7.5m £24.96 £20.80100349 Inc.vat Ex.vatCode Air Hose 8mm x 15m £36.96 £30.80100347 1/4” BSP Female Coupling £3.46 £2.88100311 1/4” BSP Male Coupling £3.76 £3.13100312 1/4” BSP Fitting £1.45 £1.21100313 1/4” BSP Female Bayonet £1.75 £1.46100314 3/8” Hose End-Male Bayonet £1.75 £1.46100315 8mm Bore Air Hose With Threaded Ends 8mm bore nitrile hose with crimped-on 1/4” BSP male fittings on both ends in a choice of two lengths and supplied with the necessary quick release fittings to attach to a compressor and air tool. A - 100311 Female Thread Quick Release. B - 100314 Female Thread Bayonet (or 410250 swivelling) C - 100313 Male Thread Bayonet (or 410251 swivelling) Quick Release Airline Fittings Swivelling Quick Release Airline Fittings 410251 Inc.vat Ex.vatCode • Allow greater flexibility where 7.5m c/w QR Fittings £29.46 £24.55100350 hose joins tool 15m c/w QR Fittings £40.96 £34.13100348 • S wivel and rotate to avoid snagged and twisted airlines • Chrome plated and polished •M ale or female 1/4” quick release The most useful style BSP fittings 410250 type of clip, made Inc.vat Ex.vatCode for securing hoses, 1/4” BSP Male £7.26 £6.05410251 flexible pipes and 1/4” BSP Female £7.26 £6.05410250 many other uses. Inc.vat Ex.vatCode Jubilee Hose Clips 9.5 to 13mm Clip (Pkt 5) £3.25 £2.71510396 51 to 70mm Clip (Pkt 3) £3.25 £2.71510401 95 to 115mm Clip £1.75 £1.46410486 General purpose 3/8” air line fittings for Flexible Clip Driver £13.96 £11.63510405 attachment to air tools and equipment. Jubilee Clips 3 Nylon Coiled Air Line Coiled 1/4” bore nylon hose in a choice of 7.5m(25’) or 15m(50’) lengths. Each comes complete fitted with a female quick release fitting at one end for coupling to an air tool and a male bayonet for direct connection to a compressor at the other. Hose Air Line Fittings Air Hose PVC/Nitrile Inc.vat Ex.vatCode Inc.vat Ex.vatCode 3/8” Hose End-1/4” BSP £2.46 £2.05100316 Coiled Air Line 7.5m £6.25 £5.21200149 Jubilee Hose Clips 9.5 to 13mm Clip (Pkt 5) £3.25 £2.71510396 Coiled Air Line 15m £7.26 £6.05200150 A good quality 3/8” bore PVC/Nitrile hose sold by the metre. Also available are the appropriate end fittings which push into the hose and are secured with hose clips. 100316 gives a 1/4” BSP male fitting and 100315 allows the male bayonet to fit into a quick release fitting. If a quick release female coupling is required then fit the 100316 to the hose and screw on the quick release coupling 100311. Inc.vat Ex.vatCode Hose Only (per mtr) £1.96 £1.63340238 3/8” Hose End-1/4” BSP £2.46 £2.05100316 These BSP fittings are used with the 3/8” bore hose to enable a 3/8” Hose End-Male Bayonet £1.75 £1.46100315 variety of connections to be made. 1/4” BSP Female Coupling £3.46 £2.88100311 Inc.vat Ex.vatCode Jubilee Hose Clips 9.5 to 13mm Clip (Pkt 5) £3.25 £2.71510396 1/8” BSP Male - 1/4” BSP Male £1.66 £1.38610021 1/4” BSP Male Joiner £1.56 £1.30100318 • 20 metres of high pressure airline stored on a hose reel 3/8” BSP Male - 1/4” BSP Male £1.96 £1.63610022 • Fibre reinforcement gives 12 bar working pressure 1/2” BSP Male - 1/4” BSP Male £2.46 £2.05610023 • Separate hose with rotary seal for connection to compressor 1/4” BSP Female Joiner £1.96 £1.63500006 • Much longer life than loose airline hose 1/2” BSP Female - 1/4” BSP Female £3.96 £3.30500007 • Supplied with Quick Release bayonet fittings 1/4” BSP Female - 3/8” Female Joiner £2.96 £2.47110388 • Top quality, made in Germany 1/4” BSP Female - 1/8” BSP Male £1.96 £1.63500081 Inc.vat Ex.vatCode Flexible driver with a hexagon socket at the end. The quick and 1/4” BSP Female - 1/4” BSP Male £1.96 £1.63500083 Airline Reel 20m £49.96 £41.63110163 safe way to tighten up your clips. 1/4” BSP Female - 3/8” BSP Male £1.96 £1.63500084 Inc.vat Ex.vatCode 1/2” Male-1/4” BSP Female £2.65 £2.21500085 T Piece 1/4” BSP Male £3.46 £2.88100319 Flexible Clip Driver £13.96 £11.63510405 Threaded BSP Airline Fittings Airline Reel Flexible Driver for Jubilee Hose Clips Self-Retracting Air Hose • Self-retracting for neat and efficient working • 7.5m of 8mm OD hose • Fitted with 1/4” BSP ends • Max working pressure 200psi PTFE Tape Twin Pack Air Tool Oil An essential item for plumbing and compressed airline systems. Seals A high quality lubricating oil specially threaded joints and also allows easy designed for use with air tools and supplied dismantling at a later stage should in a one litre bottle. circumstances make it necessary. Twin pack 2 x 12m x 12mm wide. Inc.vat Ex.vatCode Inc.vat Ex.vatCode Inc.vat Ex.vatCode Air Tool Oil 1 litre £14.95 £12.46200611 Air Hose 7.5m £38.46 £32.05310372 PTFE Tape Twin Pack £1.15 £0.96506055 130 Compressors 01.indd 130 *SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406 26/11/2014 15:36 Spray Guns Bulk Spray Guns £104.95 Ex.vat: £87.46 Code: 340292 £36.96 Air Tool Starter Kit Ex.vat: £30.80 Code: 100309 An economical package of spray gun and air accessories for general purpose use around the workshop. Kit comprises spray gun, tyre inflating gun with pressure gauge, air duster, degreasing gun, hose and PCL quick release fittings. For all compressors listed with a 2hp motor or bigger. (Fitting 1/4” BSP male). £30.96 Ex.vat: £25.80 Code: 340291 Axminster AS1020 Low Pressure Spray Gun Axminster AS1070 2 Litre Spray Gun An inexpensive, low pressure spray gun with an 800cl capacity cup and 0.7mm nozzle; for basic spraying use with any small compressor with a 1hp rating or above. Uses a maximum air delivery of 1 - 3cfm, free air delivered at 10 - 40psi. The constant air bleed through the gun cannot be switched off, other than by disconnection from the compressor. A handy sized bulk spraying unit with a 2 litre tank and a high quality spray gun, a real boon to those who have a need to spray large areas with paint, stains, varnishes and other materials. Air is fed from the compressor to the pressure controller and then on to the spray gun to atomise the paint which is in turn fed to the gun through a second hose connected to the top of the paint pot. The pressure gauge fitted to the controller gives a good degree of control over the spray pattern. The hose length is 1.8m(6’). Important Note: This spray system is not suitable for use with Xylene or Cellulose paints. If, however, there is a possibility of using these types of paint an additional delivery hose should be purchased. 3 Inc.vat Ex.vatCode Delivery Hose 8mm x 4m £69.95 £58.29292000 £199.96 £23.95 Ex.vat: £19.96 Code: 200228 Ex.vat: £166.63 Code: 340293 £59.95 Axminster SG215 Mini Touch Up Gun Ex.vat: £49.96 Code: 100308 A handy little spray gun, useful for spraying small areas of work or modelling projects. Can handle almost all finishes including water based acrylic enamels. Easy to use and comfortable, especially in the smaller hand. Fitted with a stainless steel paint flow needle, air fan control, paint regulator and 125ml suction feed cup. 1/4” BSP male inlet fitting. Takes quick release bayonet fitting 100314 or 410250 (swiveling). Axminster AS1040 Spray Gun A good general purpose spray gun, well balanced and with finely adjustable fluid and air controls. Locking cup and safety lever make this gun a good choice for a quality finish. 1/4” BSP male inlet fittings. For quick release bayonet fitting use 100314 or 410250 (swivelling). Axminster Spray Gun Cleaning Kit £25.96 Ex.vat: £21.63 Code: 100211 Specifications DIY Kit Model RatingHobby 1/4” BSP Inlet 35 - 50psi Operating Pressure 3 - 5cfm Air Consumption Nozzle1.5mm Type of FeedGravity Cup Capacity130ml Keep your spray gun in tip-top condition. The cleaning kit comes in a neat plastic case and comprises the following: 6 piece precision needle kit for gun nozzles, a handle for the needles, a 3 piece precision end bush set and a handle to suit. Numerous brushes include a nylon stiff bristle parts brush, 5 piece mini spiral brush set, a brass spiral brush, 6mm and 12mm nylon spiral brushes and a long handle spiral brush. Also in the case is a precision oiler. SG215 Light Trade 1/4” BSP 40 - 70psi 2-5cfm 0.5mm Gravity 125ml AS1020 Hobby 1/4” BSP 10 - 40psi 1 - 3cfm 0.7mm Pressure 800cl AS1040 Trade 1/4” BSP 40 - 80psi 10 - 12cfm 1.6mm Suction 1 Litre Axminster AS1080 10 Litre Spray Gun This bulk spraying kit with its 10.2 litre capacity pressurised paint pot and high performance spray gun is a real boon for those who have a need to spray large areas with paint, stains, varnishes and other materials. Air is fed to the pressure controller from the compressor (minimum airflow 10 cfm) and then on to the spray gun to atomise the paint which in turn is fed to the gun through a second hose connected to the top of the paint pot. The pressure gauge fitted to the controller gives a good degree of control over the spray pattern. The length of the two hoses is 3.7m(12’). Important Note: This spray system is not suitable as delivered for use with Xylene or Cellulose paints. If, however, there is a possibility of using these types of paint an additional delivery hose should be purchased. 1/4” BSP male fitting. Inc.vat Ex.vatCode Delivery Hose 8mm x 4m £69.95 £58.29292000 Specifications AS1080 ModelAS1070 Trade RatingTrade 1/4” BSP 1/4” BSP Inlet 30 - 50psi 50 - 80psi Operating Pressure 9.8 - 12.7cfm 10 - 12.5cfm Air Consumption 0.8mm Nozzle0.8mm Pressure Type of FeedPressure 2 Litres 10 litre Cup Capacity Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/compressors Compressors.indd 131 131 26/11/2014 10:16 Professional Spray Equipment If you are considering setting up a spraying system in your workshop a High Volume Low Pressure (HVLP) has to be the way to go. Completely portable, they take up next to no space and need very little setting up compared to a compressor driven system. Also, the cost layout is relatively low to achieve professional results, with much less time being spent between jobs. We have sold the FUJI HVLP spray systems for many years; they are consistently rated as the very best systems around thanks to continuous development in turbine and spray gun technology. There are 4 FUJI Turbines to choose from, but don’t worry, it’s not a complex choice. The range has two designs in two turbine types. The Mini-Mite range is the basic version whilst the Q Gold models have the patented Fuji noise reduction system, reducing noise by 50%, down to an almost conversational level. The numbers 3 or 4 refer to the number of turbine fans, four fans giving a higher pressure (9psi versus 6.5psi) to cope with higher viscosity finishes such as latex house paints or larger jobs that need a faster application of the finish, re-spraying a car for example. For normal water or oil based finishes to be applied to furniture, cabinets or for small vehicle panel refinishing the three turbine models will be more than adequate. All models feature an internal air dump valve to allow the non-bleed spray gun feature, twin air filters, a sturdy top grab handle and high quality alloy and brass air fittings. A 7.6 meter hose is supplied, with quick-connect fittings and an air volume control valve. The bottom line is, you can expect a consistent and impressive performance from any model of FUJI HVLP spray system, we don’t think you can really ask for more. 3 Fuji Mini-Mite 3 or 4 Turbine Unit with T70 Spray Gun Fuji Q3 or Q4 Gold Pro Turbine Unit with T70 Spray Gun • Three stage turbine power unit • Most finishes can be sprayed • 25’ (7.6m) 3/4” hose supplied • Supplied with Fuji’s comprehensive guide • Choice of Xpc spray guns with Adjustable Spray Pattern control • 1.4mm aircap as standard, covers the majority of applications • Other aircaps available for special applications Inc.vat Ex.vatCode Mini-Mite T70 Mini-Mite 3 Turbine Unit & Model T70 Suction Feed Spray Gun £469.96 £391.63717477 RatingTrade Mini-Mite 3 Turbine Unit & Power1.5kW 73dB(A) @ 6 meters T70 Gravity Feed Spray Gun £469.96 £391.63717478 Noise Level 1.4mm (Std) Mini-Mite 4 Turbine Unit & Nozzle 7.6m T70 Suction Feed Spray Gun £579.96 £483.30717479 Hose Length 430 x 370 x 430mm Mini-Mite 4 Turbine Unit & Overall L x W x H T70 Gravity Feed Spray Gun £579.96 £483.30717480 Weight12kg 132 Compressors.indd 132 • Quiet running three stage turbine power unit • 7.6m(25’) of 3/4” bore hose • L ow delivery pressure gives good finish with reduced overspray •M ost finishes can be sprayed including inks, stains, lacquers, varnishes, enamels and acrylics • Included is Fuji’s very comprehensive guide covering all aspects of HVLP spraying in great detail Inc.vat Ex.vatCode Pro-Spray 1500-3s Model Q3 Gold Pro Turbine Unit & T70 Suction Feed Spray Gun £629.95 £524.96717481 Rating Industrial Power 1.5kW Q3 Gold Pro Turbine Unit & 78dB(A) T70 Gravity Feed Spray Gun £629.95 £524.96717482 Noise Level Nozzle1.3mm Q4 Gold Pro Turbine Unit & 6m T70 Suction Feed Spray Gun £759.96 £633.30717483 Hose Length 425 x 365 x 415mm Overall L x W x H Q4 Gold Pro Turbine Unit & T70 Gravity Feed Spray Gun £759.96 £633.30717484 Weight14kg Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95 26/11/2014 10:16 Spray Equipment Semi-Pro2 HVLP Spray System Fuji T70 Spray Guns The Fuji T-Series Spray Gun features an exclusive side-mounted pattern control knob to adjust the size of the fan. This knob allows you to switch from a small to large pattern, or anywhere in between. Unlike HVLP turbine spray guns with the front collar adjustment, the pattern control knob offers full incremental fan size throughout the whole range.The fan pattern is adjustable from 1” to 15” from a distance of 8”. Smaller than 1” is achieved by moving closer to the object to be sprayed. All T-Series Spray Guns are installed with a 1.3mm needle and nozzle set-up. You can obtain a professional finish with all known coatings. The gun body is CNC machined to aircraft tolerances. All Fuji spray guns are non-bleed. Air passes through the spray gun only when the trigger is pulled. The light weight of the T-Series and easy-pull trigger means less fatigue for the operator. Features include: • Centre mounted 600cc gravity cup or 950cc bottom feed cup versions available • A stay-cool nylon handle (fitted over a metal tube) • Stainless steel fluid passages and an external needle packing adjustment • Metal fluid knob and collar, stainless steel internal components • Rear rotating nipple for pressure tubes makes for easier adjustment especially for those who are left-handed Model Fuji Q Gold T70 Pro HVLP Industrial Rating 1.5kW Power Noise Level 59dB(A) @ 6 meters Nozzle 1.4mm (Std) 7.6m Hose Length Overall L x W x H 400 x 430 x 470mm 18kg Weight £319.96 Ex.vat: £266.63 Code: 501285 To meet the growing demands of the home, hobby and craft markets, Fuji has introduced the Semi-Pro2 HVLP spray system. Key features found on no other entry level system are standard, such as a powerful 1,400W 2-stage motor turbine and the Fuji M-Model spray gun. This is a non-bleed design of gun with a fan control knob to adjust the spray pattern from small circular to a wide fan (and all increments in-between). Light in weight with a cool handle, this is supplied as a suction gun with a 1,000cc cup, but a smaller 400cc gravity cup kit can be purchased as an option. The nozzle and needle are stainless steel; other air caps are available as optional extras. The turbine unit is in a sturdy steel cabinet complete with a grab handle and handy gun storage. External air filters are easy to wash or change. Includes a full 7.6m hose with Quick Connect Coupler and an Air Control Valve. This is a lightweight machine ideally suited to serious DIY, crafts or hobbies. Supplied with comprehensive user manual, viscosity cup, cleaning brush and wrench. Everything except the paint! Fuji Semi-Pro2 Pressure Tubes Pressure tubes with check valves for the M-Model spray gun. If these become blocked it would be worth soaking in the appropriate thinners for 30 mins before replacing. In packs of five, N.B. fits M-Model spray guns only. Inc.vat Ex.vatCode Pressure Tubes Suction M-Model £13.96 £11.63501292 3 Fuji Xpc Air Caps Finest 0.7mm (.027”), (0.8mm 0.031” M model)size Aircap Set for finest atomization. Suitable for inks, shading, mist coats and spray tanning. Fine 1mm (.039”) size Aircap Set for fi ner atomization. Suitable for most water-based lacquers and shading. Standard 1.4mm (.055”) (1.3mm .055” M-Model) is installed in all Xpc spray guns. Aircap Set is perfect for most fi ne fi nishing. Medium output 1.5mm (.60”) Aircap Set for slightly heavier coats with standard paints. High output 1.8mm (.070”) Aircap Set for faster coverage of large areas with any type of paint. Extra High output 2.2mm (.086”), (2.0mm, 0.78” m model). Great for spraying large surfaces such as walls with emulsions. Inc.vat Ex.vatCode Expectsome slight texture. T70 Series Suction Spray Gun £239.95 £199.96505155 Needles 211963-211967 are for Xpc guns only, needles 501286T70 Series Gravity Spray Gun £239.95 £199.96505156 501291 are for M-Model guns only. Fuji T70 Series Air Caps Specifications ModelSemi-Pro2 RatingHobby 1.4kW (230V) Power Noise Level76dB(A) 1.3mm (Std) Nozzle Hose Length7.6m 420 x 370 x 420mm Overall L x W x H Weight11kg Inc.vat Ex.vatCode 0.7mm (.027”) Air Cap (Inks, Shading) £45.96 £38.30211963 1mm (.039”) Air Cap (Lacquers, Shading) £45.96 £38.30211964 1.4mm (.055”) Air Cap (Fine Finishing) £45.96 £38.30211965 1.8mm (.070”) Air Cap (Paint, Varnish) £45.96 £38.30211966 2.2mm (.086”) Air Cap (Exterior Paints) £45.96 £38.30211967 0.8mm (.31”) Air Cap (Inks, Shading) £39.96 £33.30501286 1mm (.039”) Lacquers, Shading, Water Based Coatings £39.96 £33.30501287 1.3mm (.055”) Fine finishing, Lacquers, Enamels, Polyuethenes £39.96 £33.30501288 1.8mm (.070”) Paint, Varnish, Fast Finishing£39.96 £33.30501290 2.0mm (.079”) Emulsions, Exterior Finishes£39.96 £33.30501291 1.5mm (.059”) General Paints, Varnish £39.96 £33.30501289 Fuji Gravity Feed Gun Holder Stand • Sizes from 0.8mm (.030”) to 2.5mm (.135”) • Allows the user to fill the • The smallest is suitable for inks, shading and mist coats gravity feed cup without • The largest is great for spraying large surfaces or textured assistance coatings • Rest your Fuji Gravity Spray Fuji T70 Series Gravity Cups • For T70 Series spray guns only, does not fit older spray guns Gun while you are refilling the cup or in-between coats Optional or replacement gravity feed cups for T70 Series spray Inc.vat Ex.vatCode • Will also fit other standard guns. Choice of 600 or 950cc sizes. 1.0mm (0.039”) Lacquers, Shading, size gravity spray guns Water Based Coatings £49.96 £41.63505159 Inc.vat Ex.vatCode 1.5mm (0.060”) Fine Finishing, Inc.vat Ex.vatCode T70 Series 600cc Gravity Cup £39.96 £33.30505167 Lacquers, Enamels, Polurethanes, Latex £49.96 £41.63505161 T70 Series 950cc Gravity Cup £45.96 £38.30505168 Gravity Feed Gun Holder Stand £11.95 £9.96505165 1.8mm (0.070”) Paint, Varnish, Fast Finishing £49.96 £41.63505162 Fuji T70 Series Gravity 2.0mm (0.078”) Exterior Paints, Cup Parts Kit Splatter Paints, Emulsions £49.96 £41.63505163 Fuji 600 & 950cc • Service kit of parts for both 600cc 0.8mm (0.030”) Inks, Shading, Gravity Cup and 950cc gravity feed cups Spray Tanning £49.96 £41.63505158 Gaskets (Pack 5) • For T70 Series spray guns only 1.3mm (0.051”) Standard Fine • Replacement gaskets for gravity cups, pack of 5 Finishing, General Purpose £49.96 £41.63505160 Inc.vat Ex.vatCode Inc.vat Ex.vatCode 2.5mm (0.135”) Stone Finishes, 600/950cc Gravity Cup Parts Kit £21.96 £18.30505157 Industrial Undercoats, Fast Emulsion Finishing£49.96 £41.63505164 T 70 Series Gravity Cup Gaskets (pk5) £13.45 £11.21505166 Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/compressors Compressors.indd 133 133 26/11/2014 10:16 Get creative with Our airbrushing range from SprayCraft offers all you need including ready-to-use kits and accessories for the beginner as well as for the professional. From easy-to-use single action broad stroke to dual action detailed airbrushing, SprayCraft offers the perfect solution. Beginner Sets SP10 Easy To Use Airbrush 3 • SP10 airbrush with hose, propellant adaptor, paint jar, compressor adaptor and cleaning wire • Perfect for the beginner • Single action trigger to regulate airflow and for ease of use • Air and paint mixed outside the airbrush for easy cleaning • Spray pattern approximately 12.5mm • Comes with airbrush, hose, 1/4” BSP Female compressor adaptor and fitted propellant adaptor SP10K Easy-To-Use Airbrush Kit • Perfect for the beginner • Single action trigger to regulate airflow and for ease of use • Air and paint mixed outside the airbrush for easy cleaning • Spray pattern approximately 12.5mm • Comes with airbrush, hose, 1/4” BSP Female compressor adaptor and fitted propellant adaptor • 300ml air propellant included Acrylic Airbrush Paint Set A primary colour set of 6 acrylic paints. They come in 32ml bottles and can be used with airbrushes, paint brushes, pens and rollers. Colours included are red, blue, yellow, green, black and white. They can be used on metals, plastics, glass, paper, canvas, wood, leather, fabrics, ceramics and clay. Inc.vat Ex.vatCode Set of 6 £27.46 £22.88504975 Inc.vat Ex.vatCode Inc.vat Ex.vatCode SP10K £25.96 £21.63504964 SP10 £17.95 £14.96504965 Intermediate Sets Model Craft Dropper Bottles SP20K Airbrush Kit SP50K Dual Action Airbrush Kit • 3 easy change tips for fine, medium and broad strokes • S ingle action trigger to regulate airflow and for ease of use •A ir and paint mixed outside the airbrush for easy cleaning • S pray pattern range from 0.8 to 38mm • K it comes with SP20 airbrush, hose, 1/4” BSP Female compressor adaptor and fitted propellant adaptor • 3 00ml air propellant included • Pack of 4 x 17ml bottles • Suitable for storing paints for modelling and air brushing Inc.vat Ex.vatCode 4 Pack 17ml Bottles £3.76 £3.13504806 • Internal dual mix airbrush • For fine detail and larger coverage work • Can be used for a wide range of applications • Fine dot spray pattern Universal Airbrush • Spray pattern approx. 1.6 - 38mm Propellant •C omes with propellant can adaptor and 1/8” female threaded • Universal airbrush propellant in 300ml and hose connection Inc.vat Ex.vatCode 500ml cans Inc.vat Ex.vatCode •D oes away with the need for a compressor SP20K £40.96 £34.13504967 SP50K £61.96 £51.63504968 • S uitable for use with SprayCraft, Aztek, Badger, Revell and most popular airbrushes • P lease note: this product can only be shipped to UK mainland Expert Sets Inc.vat Ex.vatCode 300ml £6.46 £5.38504977 500ml £8.46 £7.05504978 SP30 Top Feed Airbrush & Compressor Set Airbrush Cleaner • A single action gravity feed airbrush and mini compressor • Spray pattern of 1.6 to 30mm • K it contains SP30 airbrush, mini compresor and hose with fittings • A must for every airbrush user • Use to clean all parts of an airbrush • Size of can: 150ml • P lease note, this product can only be shipped to UK mainland Inc.vat Ex.vatCode SP30 £99.96 £83.30504971 Inc.vat Ex.vatCode 150ml £5.95 £4.96504981 134 Compressors.indd 134 axminster.co.uk/signup for our exclusive email offers 26/11/2014 10:17 Spraying Equipment SprayCraft Set of 3 Jars (SP50) Apollo Pro-Spray 1500-3s A British made High Volume Low Pressure unit designed for the serious sprayer, this model has a powerful 1,500 watt 3 stage turbine and the ability to handle all types of coatings. Inc.vat Ex.vatCode The turbine housing is all steel and powder coated to Set of 3 Jars £5.95 £4.96504979 withstand the everyday knocks and scuffs on-site or in the workshop. The 6 metre air hose with brass couplings is rugged enough for everyday use. The externally mounted air filter is easy to check and change when required. Included with this machine is the professional ANB300 Proline aluminium spray gun with several key features. This is a “non bleed” gun, meaning that the air shuts off when the trigger is released, reducing Set of 4 dust lift. A stainless steel needle set (1.3mm is supplied as standard), essential with the new generation of water-borne Jars For coatings. Smooth trigger action for accurate application control. SP10 and Ergonomic, stay-cool handle unit for all day comfort. Adjustable SP20 fan pattern from horizontal to vertical plus and additional spot • 2 x 1/2oz and 2 x 1oz jars controller for super fine detail work. This powerful spray unit • For use with the SP10 and SP20 airbrushes has been designed with the professional sprayer, looking for the Inc.vat Ex.vatCode highest possible finish whatever the application. Set of 4 Jars £6.46 £5.38504980 • 3 x 22cc jars with screw-on metal lids • For use with the SP50 airbrush Airbrush Cleaning Pot Pro-Spray 1500-3s Model RatingIndustrial Power1.5kW Noise Level78dB(A) Nozzle1.3mm Hose Length6m 425 x 365 x 415mm Overall L x W x H Weight14kg Inc.vat Ex.vatCode Pro-Spray 1500-3s 230V £369.96 £308.30210615 Air Brush Filter Regulator • For cleaning residual paints from airbrushes • Allows you to clean the airbrush safely • Just press the brush into the nozzle and spray into the jar • Filter prevents fumes from entering the atmosphere Inc.vat Ex.vatCode Cleaning Pot £21.46 £17.88504976 Polyvine Acrylic Enamel Paint Suitable for interior and exterior applications, Polyvine acrylic enamel paints are easy to use, low odour and non-hazardous. Safe for children’s toys, they can be applied either with a brush or an airbrush. Tough and durable, they are available in a wide range of inter mixable colours which can be applied to plastic, metal, wood, glass, ceramic or porcelain. Nice-easy clean-up using water too. This combined filter and regulator can be used to achieve perfect results with your air brush from compressor supplied air. The air pressure can be set by rotating the control knob at the top whilst the centrifugal filter will ensure a supply of water-free air to the brush. The body of the regulator has two 1/8” BSP female tappings and there are two 1/8” BSP male to male adaptors provided. 3 Inc.vat Ex.vatCode Filter Regulator £27.96 £23.30510047 510041 510040 Inc.vat Ex.vatCode Metallic Gold £1.96 £1.63952523 Metallic Silver £1.96 £1.63952524 510051 Antique Bronze £1.96 £1.63952525 Baltic Blue £1.96 £1.63952526 Brunswick Green £1.96 £1.63952527 510050 Black £1.96 £1.63952528 Bright Red £1.96 £1.63952529 Emerald £1.96 £1.63952530 French Blue £1.96 £1.63952531 Matt Flesh £1.96 £1.63952532 A selection of accessories and spare items for our range of air Brown £1.96 £1.63952533 brushes and small compressors, CP101 and CP103. To ensure Ferrari Red £1.96 £1.63952534 that you order the right items check that the hoses and fitments A small 1.5cfm oil-less diaphragm compressor driven by a 90W Ivory £1.96 £1.63952535 all have common threads. N.B. The only sizes used here are M5, induction motor. Quiet and exceptionally portable, the CP103 Lime £1.96 £1.63952536 1/8” BSP and 1/4” BSP. is suitable for use with most small air brushes and air brush kits. Matt Black 20ml £1.96 £1.63952537 Inc.vat Ex.vatCode Supplied complete with a 3.5 litre air reservoir tank, this gives Matt White £1.96 £1.63952538 1/8” BSP Female - 1/8” Hose £2.46 £2.05510041 a much smoother flow of air to the brush so that a better finish Orange £1.96 £1.63952539 1/8” BSP Male - 1/8” BSP Male Adaptor £2.46 £2.05510050 can be achieved. Complete with a 1/8” BSP outlet and 1/8” BSP Matt Primer £1.96 £1.63952541 1/4” BSP Male - 1/8” BSP Female £2.95 £2.46510051 to 5mm adaptor and moulded 13A plug. Pink £1.96 £1.63952542 1/8” BSP Female - M5 Male £2.16 £1.80510040 N.B. This compressor is only suitable for use with air brushes. Purple £1.96 £1.63952543 Sea Blue £1.96 £1.63952544 Specification - CP103 White £1.96 £1.63952546 ModelCP103 Yellow £1.96 £1.63952548 Hobby Rating Metallic Gold £3.76 £3.13952549 90W (230V) Power Metallic Silver £3.76 £3.13952550 Max Pressure35psi Brunswick Green £3.76 £3.13952551 Noise Level51db Black £3.76 £3.13952552 • 7mm o/d braided rubber air hose 1/8 BSP Outlet Bright Red £3.76 £3.13952553 • 1/8” BSP female fittings 400 x 130 x 350mm Overall L x W x H French Blue £3.76 £3.13952554 • Length 1.8m(6’) Weight7.7kg £3.76 £3.13952555 Matt Black Inc.vat Ex.vatCode White £3.76 £3.13952556 Inc.vat Ex.vatCode Braided Hose with 1/8” BSP Ends £10.45 £8.71510046 Yellow £3.76 £3.13952557 CP103 Compressor 230V £154.96 £129.13400314 Axminster Air CP103 Air Brush Compressor with Reservoir Tank Air Brush Fittings Braided Rubber Air Hose with 1/8” BSP Ends Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/compressors Compressors.indd 135 135 26/11/2014 10:17 Section Jet JSM-4140 3/8” Mini Impact Wrench Jet JSM-5130/5252 1/4” Die Grinder Part of the Jet “ERGO” range of high quality, light weight, low vibration tools, these die grinder’s are easy to control, allowing delicate tasks to be completed with ease. There is a choice of straight or 90° angled versions. The 1/4” collet allows many type of commonly available fittings to be used, enhancing the usefulness of this great tool. Supplied with 1/4” and 6mm collets. Specification - JSM-5130/5252 3 ModelJSM-5130/5252 RatingTrade 20,000 rpm No Load Speed 1/4” NPT Inlet 90 psi Operating Pressure Air Consumption4cfm Weight0.75kg Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these lightweight 3/8” and 1/2” impact wrench’s have an exceptional power to weight ratio and features twin hammers plus an easy-to-use torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor’s are completely reliable and highly durable. Perfect for use every day in the workshop. Specification - JSM - 4140 ModelJSM-4140/4341 RatingTrade No Load Speed9,000rpm 1/4” NPT Inlet Operating Pressure90psi Air Consumption4cfm Max Torque200ft/lbs Weight1.75kg Jet JSM-4540 3/4” Impact Wrench Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, this heavyweight 3/4” impact wrench really is a powerful tool with an exceptional power to weight ratio and features twin hammers plus an easy-to-use torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor is completely reliable and highly durable. This unit has an extremely high torque output, enough for just about any task. Perfect for use all day in the workshop. Specification - JSM-4540 ModelJSM-4540 RatingTrade No Load Speed5,500rpm 3/8” NPT Inlet Operating Pressure90psi Air Consumption4cfm Max Torque1,400ft/lbs 4.0 kg Weight Inc.vat Ex.vatCode Inc.vat Ex.vatCode JSM-4140 3/8” Impact Wrench £139.96 £116.63505065 JSM-4540 3/4” Impact Wrench £359.95 £299.96505068 JSM-4341 1/2” Mini Impact Wrench £139.96 £116.63505067 Inc.vat Ex.vatCode JSM-5130 1/4” Air Die Grinder £67.96 £56.63505061 JSM-5252 1/4” Angle Die Grinder £72.96 £60.80505062 Jet JSM-4343 1/2” Impact Wrench Jet JSM-3330/3430 3/8” Ratchet Wrench Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these lightweight 3/8” and 1/2” ratchet wrench’s have exceptional power to weight ratios plus an easy-touse torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor is completely reliable and highly durable. Perfect for use every day in the workshop. Specification -JSM-3330/3430 ModelJSM-3330 RatingTrade No Load Speed150rpm 1/4” NPT Inlet Operating Pressure90psi Air Consumption4cfm Max Torque50ft/lbs Weight1.25kg The “ERGO” range from Jet is a range of air tools made to the highest specification and build standards. These tools combine light weight, a comfortable grip and low vibration levels to give reliability and all day comfort in use. This medium weight 1/2” impact wrench has an exceptional power to weight ratio and features twin hammers plus an easy-to-use torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor is completely reliable and highly durable. Perfect for use every day in the workshop. Specification - JSM-4343 ModelJSM-4343 RatingTrade No Load Speed7,000rpm 1/4” NPT Inlet Operating Pressure90psi Air Consumption4.4cfm Max Torque600ft/lbs Weight2.5kg Inc.vat Ex.vatCode JSM-3330 3/8” Air Ratchet Wrench JSM-3430 1/2” Air Ratchet Wrench 136 Compressors.indd 136 £69.96 £69.96 £58.30505071 £58.30505072 Jet JSM-8272/8372 Air Screwdriver Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these screwdrivers are both light in weight and very comfortable in use. There is a choice of two models, high and low speed, both having a 1/4” Hex drive. There is an adjustable torque setting on both models, the slow speed model having an extra high level of torque available. The high quality air motor, variable speed trigger and convenient forward/reverse control all give positive control. Plenty of torque is available to handle even tough tasks. These drills will work tirelessly all day long. Specification - JSM-8272/8372 ModelJSM-8272/8372 RatingTrade No Load Speed1,800rpm 1/4” NPT Inlet Operating Pressure90psi Air Consumption4cfm 45-115 ft/lbs Torque Weight1.25kg Inc.vat Ex.vatCode Inc.vat Ex.vatCode JSM-8272 Slow Speed Air Screwdriver £84.96 £70.80505069 JSM-4343 1/2” Air Impact Wrench £159.96 £133.30505066 JSM-8372 High Speed Air Screwdriver £99.96 £83.30505070 Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95 26/11/2014 10:17 Trade Air Tools uvex Ultra Comfort Safety Goggles One of our best selling googles, giving essential eye protection and ultimate comfort, having uvex ‘surpervision extreme’ technology meaning the lens cannot steam up. Protection for any activity involving tools and where there is a possible danger to your eyes. Chemical resistant, anti scratch, 100% UV protection and all round vision. The soft shroud adapts to face curves for a perfect seal, exceptionally comfortable and there is good side protection, even when worn with prescription spectacles. Class 1 polycarbonate lens, CE approved EN166 1B 349. Jet JSM-7572/7472 3/8” Reversible Air Drill Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these air drills are easy to control, comfortable to use and can be used all day long. Both are fitted with top quality Jacobs industrial keyed chucks, the JSM-7572 a 3/8” chuck whilst the JSM-7472 has a 1/2” chuck. Both air drills have a trigger operated variable sped control and a thumb operated forward/reverse control. The 1/2” model has a side handle for extra control, especially useful when drilling sheet metal. Full ball bearing construction and a planetary reduction gearbox ensures reliability every day. Specification - JSM-7572/7472 ModelJSM-7572/7472 RatingTrade 1,800 rpm No Load Speed 1/4” NPT Inlet 90 psi Operating Pressure Air Consumption4cfm Weight1.5kg Axminster Professional Tyre Inflator This is a rugged tyre inflator with a dial reading pressure gauge, more like the one you find at the local garage (or maybe even better!). With a large, clear gauge protected by a rubber housing, it reads in psi, kg/cm², kpa and bar. Cleverly, the gauge swivels to allow left or right handed use. It has a 1/4” BSP female fitting. For quick release couplings use 100313 or 410251 (swivelling). Inc.vat Ex.vatCode Ultra Comfort Safety Goggles £12.96 £10.80310226 Axminster B41 Air Caulk-Mastic Gun If you have ever dispensed more than half a tube of Inc.vat Ex.vatCode mastic around windows or frames you will appreciate the Professional Tyre Inflator £58.96 £49.13505212 simplicity and convenience of this very simple gun. At the touch Inc.vat Ex.vatCode JSM-7572 3/8” Air Drill £94.96 £79.13505063 JSM-7472 1/2” Air Drill £114.96 £95.80505064 3 of the trigger air pressure is applied to the back of the cartridge and out comes a very even flow of material. Be warned, however, that if the pressure is too high it tends to come out rather quickly! Suitable for use with virtually any small compressor fitted with a reservoir. Saves a lot af arm ache! The tool is supplied with a 1/4” BSP bayonet connector. Please refer to the Airline Fittings section for details of suitable airlines and fittings. Inc.vat Ex.vatCode Mastic Gun £23.95 £19.96340448 Axminster R15 Air Riveter Kit Axminster Air 10mm Reversible Drill This heavy duty air drill is fitted with 10mm capacity Jacobs keyed chuck. Rugged machined alloy casing and protective rubber grip give it a very durable build quality. Ball bearings are used throughout and a planetary gearbox provides the necessary speed reduction. Fitting very nicely in the hand, with a forward/reverse selection by the flick of a switch. A 1/4” BSP quick release bayonet fitting is provided. Please refer to the Airlines Fittings section for details of suitable airlines and fittings. A production rivet gun kit with four different rivet heads for blind rivets 3mm, 4mm and 5mm. The rivet is easily set with a pull on the trigger and without the risk of damaged knuckles. On the rear of the gun is a receiver which catches rivet shanks and stores them ready for later disposal. Supplied in a kit box with an impressive collection of rivets, jaws, noses, spare parts and tools. This gun will work on virtually any compressor with a reservoir tank. 1/4” BSP female fitting. Air Tool Oil A high quality lubricating oil specially designed for use with air tools and supplied in a one litre bottle. Inc.vat Ex.vatCode Air Tool Oil 1 litre £14.95 £12.46200611 Air Dusters Inc.vat Ex.vatCode Air Riveter Kit £89.95 £74.96800435 Pop Rivets 3, 4 and 5mm head diameter alloy Pop Rivets for maximum grip. Material lengths are 3mm (short), 6mm (medium) and 13mm (long). Axminster Heavy Duty Air Duster A nicely made cast alloy air duster. Inc.vat Ex.vatCode Chrome plated body with brass valve and 3mm Alloy Short (Pkt 100) £2.26 £1.88900086 nozzle to ensure a long life. Convenient 3mm Alloy Medium (Pkt 100) £2.26 £1.88900085 hanging hook. Comfortable and durable 3mm Alloy Long (Pkt 100) £2.26 £1.88900084 in use. Has a 1/4” BSP female fitting. For 4mm Alloy Short (Pkt 100) £2.46 £2.05900089 quick release coupling use 100313 or 4mm Alloy Long (Pkt 50) £1.96 £1.63701468 410251 (swivelling). 5mm Alloy Short (Pkt 50) £2.26 £1.88701471 5mm Alloy Medium (Pkt 50) £2.26 £1.88701470 Inc.vat Ex.vatCode Inc.vat Ex.vatCode 5mm Alloy Long (Pkt 50) £2.46 £2.05701469 Reversible Air Drill £41.95 £34.96501165 Air Duster £14.95 £12.46310374 Specification - 10mm Reversible Drill RatingTrade No Load Speed2,200rpm 1/4” BSP Inlet Operating Pressure90psi Air Consumption6cfm Weight1.250kg Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/compressors Compressors.indd 137 137 26/11/2014 10:17 Air Tool Sanders Mirka RO325DB Mirka ROS325CV Mirka ROS325CV/ROS325DB 77mm Random Orbit Sander 3 The Mirka ROS325CV (Central Vacuum) and ROS325DB (Dust Bag) pneumatic random orbit sanders are fitted with a 77mm backing pad that has been specially developed for spot sanding of defects or sanding small furniture pieces. The ROS325CV model is fitted with Mirka’s central vacuum port, so that when the sander is connected to a suitable dust extraction system you are able to sand completely dust free. The ROS325DB model has a dust bag for those who do not have a vacuum extraction system; only compressed air is required for dust free sanding. These sanders fit neatly in the hand and are extremely light and balanced so can be used for long periods without the user tiring. The speed is exceptionally easy to control. A 2.5mm orbit guarantees a fine surface finish. If you are looking for sanding perfection in a smaller package then these sanders are for you. Full range of abrasives available, see Abrasives, Cleaners and Finishes section. Inc.vat Ex.vatCode ROS325CV 77mm Central Vacuum £149.95 £124.96501125 ROS325DB 77mm Dust Bag £149.95 £124.96501126 Mirka ROS650DB Mirka ROS650CV Mirka ROS650CV/ROS650DB 150mm Random Orbit Sander The Mirka ROS650CV (Central Vacuum) and Mirka ROS650DB (Dust Bag) are 150mm air powered random orbital sanders with a 5.0mm orbit. This style of sander has a huge reputation for fine finishing and Mirka products take the lead in this field. The ROS650CV is fitted with a central vacuum port which ensures completely dust free sanding when it’s connected to a suitable extraction system. The ROS650DB is fitted with a dust bag system which ensures completely dust free sanding without requiring connection to an extraction system. These sanders are extremely light in weight, very well balanced and can be used for long periods. The speed can be regulated through a range of 4-12,000rpm. Suitable for use on all kinds of surfaces and capable of a very fine finish. Perfect for large furniture, work surfaces and vehicle use. Full range of abrasives available, see Abrasives, Cleaners and Finishes section. Inc.vat Ex.vatCode ROS650CV 150mm Central Vacuum £134.95 £112.46501127 ROS650DB 150mm Dust Bag £159.96 £133.30501128 Comparison Chart - Mirka Random Orbit Sanders ROS325CV & ROS325DB Model RatingIndustrial No Load Speed12,000rpm Noise Level dB @ 1M80 6.2 bar Operating Pressure 481 l/min (17cfm) Air Consumption Pad Size77mm Weight0.5kg 138 Compressors 03.indd 138 ROS650CV & ROS650DB Industrial 12,000rpm 77 6.2 bar 481 l/min (17cfm) 150mm 0.8kg For Mirka Abrasives, please go to the Abrasives, Cleaners & Finishes Section *SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406 26/11/2014 12:04 Industrial Site Nailers Axminster Air DA1564 15 Gauge Finish Nailer Axminster Air FN2890D Framing Nailer An industrial finishing nailer for both interior and exterior use. The non-marking tip device and the adjustable depth control make it just as good for fine furniture and upholstery work as it is for battening and framing. Easy loading of nails into the rear entry angled magazine coupled with the powerful nailing action make this a real time saver on site. The swivelling exhaust deflector and rubber grip handle makes for comfortable use. The nails are 34°, 15 gauge (1.8mm) with 3mm heads. The nailer will take nails with a minimum length of 15mm and a max of 50mm. The tool has a 1/4” male bayonet fitting. Lubricate regularly. Please refer to Airline Fittings section for details of suitable airlines and fittings. For quick release bayonet fitting use 100313 or 410251 (swivelling). Supplied in a plastic storage case. This is a heavy duty on-site-use nailer, just the job for trusses, decking, framing and sheeting. Exceptionally light and strong due to its magnesium alloy casing. The FN2890D Framing Nailer fires collated 28° clipped head nails from 50mm to 90mm with a diameter from 2.9mm minimum, to 3.3mm maximum. The nailer has a fast loading magazine with load sight and maximum capacity of 84 nails (2 strips). Its handle has a rubberised grip for user comfort, especially useful for shock absorbing and a variable position air exhaust vent. Supplied with 2 triggers to allow single action firing only (to prevent a double firing) or the faster bump feed firing action. Also comes supplied in a sturdy case with safety goggles, service tools and lubrication oil. Please note that this nail gun requires a compressor capable of delivering 7cfm minimum. The tool has a 1/4” BSP female inlet; refer to the Airline Fittings section for details of suitable airlines and fittings. Specifications ModelDA1564 RatingIndustrial Inlet1/4”BSP 100 Nails Load Capacity Operating Pressure70-120psi Air Consumption7cfm 345 x 120 x 305mm Overall L x W x H Weight2.53kg Specifications ModelFN2890D RatingIndustrial 1/4” BSP Inlet 84 Nails Load Capacity Operating Pressure60-95psi Air Volume7cfm 215 x 82 x 135mm Overall L x W x H Weight3.5kg 3 BULK PRICING AVAILABLE on all nails and staples Inc.vat Ex.vatCode Inc.vat Ex.vatCode DA1564 15 Gauge Finish Nailer £104.95 £87.46953416 Framing Nailer £159.96 £133.30200395 15 Gauge Finish Nails Box 4,000 Fits Axminster DA65 or any 15 gauge nail gun. Inc.vat Ex.vatCode 32mm £25.96 £21.63114014 38mm £29.95 £24.96114015 44mm £34.96 £29.13114016 50mm £38.95 £32.46114017 Makita GN900SE Gas Nailer • Clipped head Li-Ion / gas nailer • 7.2V battery will fire up to 4,000 nails per charge • 40g gas cell fires up to 1,200 shots per cell • 34° nails firing 2-3 nails a second • LED low battery light, 30 minute battery charge • Error detection system • Supplied with 2 x Li-Ion batteries, charger and a case • Free 3 year service plan included on tool registration Specifications ModelGN900SE RatingIndustrial 44 Nails Load Capacity Weight3.5kg Makita Nail and Gas Packs for Gas Nailer Galvanised ring and smooth nails, in lengths: 51mm, 63mm and 90mm. Supplied with sufficient gas per box of nails. 28 Degree Galvanised Ring Shank Nails - Box 2,000 Inc.vat Ex.vatCode 50mm £25.45 £21.21100073 Inc.vat Ex.vatCode 60mm £26.95 £22.46100074 75mm £34.96 £29.13100075 51 x 2.8mm Ring pkt 4000 + Gas £72.96 £60.80501838 Inc.vat Ex.vatCode 90mm x 3.3mm £42.96 £35.80340331 90 x 3.1mm Smooth pkt 2000 + Gas £61.96 £51.63501841 Gas Nailer £459.96 £383.30210703 Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/compressors Compressors.indd 139 139 26/11/2014 10:17 Workshop Air Nailers With the increasing popularity of low cost portable. Compressors has come a big increase in the use of air powered nailers and staplers in the upholstery, craftwork, furniture making and building trades. They are relatively cheap to buy, convenient to use, very productive and, provided that sensible precautions are taken, long lasting and safe to use. Here are a few safety and maintenance points to watch: Tools should be lubricated regularly and care taken to ensure that the air pressure is correct and adjusted to suit the size of nail or staple. Excessive pressure will cause unnecessary strain on the firing pin. The firing pin should be regarded as a consumable part and a spare kept to hand. Nail guns use the spent air at the end of the stroke to return the piston or firing pin to the upper position and therefore, if the gun has been used on a discharged compressor, the piston may remain in the downward position. If this should occur, and it sometimes is unavoidable, especially when the unit is new and is not worn in, the gun should be removed from the supply and the firing pin returned manually to its normal resting position. If the firing pin should break after a jam, a new firing pin should be installed immediately to avoid any further damage. If you have problems operating one of our nail guns please contact our Specialist Sales Department who will be pleased to help. Always check for a broken firing pin before sending back for repair under warranty as this can easily be replaced without incurring postage or service charges. Axminster Air AWHP Headless Pinner • Drives 24 gauge headless pins up to 20mm long • Fast fixing of mouldings, decorative trim, glazing bead, etc • Almost invisible holes left behind nail • Lightweight and comfortable for all day use • Suitable for use with small compressors • Supplied with 1/4” BSP Quick Release bayonet fitting £35.95 3 Ex.vat: £29.96 Code: 010016 Inc.vat Ex.vat Code Replacement Firing Pin £4.96 £4.13 100140 Axminster Air AW50N 18G Brad Nailer • Lightweight, reliiable, trade-rated brad nail gun • Fires 18 gauge T-headed brad nails from 15-50mm long • Trigger or bump operation • Supplied with 1/4” BSP Quick Release bayonet fitting £54.96 Ex.vat: £45.80 Code: 340382 Inc.vat Ex.vat Code Replacement Firing Pin £6.96 £5.80 340383 Axminster Air T50P 16G Brad Nailer Axminster Air AW32NS Nailer Stapler • Medium weight, trade-rated nailer • Fires 16 gauge T-headed nails from 20-50mm long • Trigger or bump operation • Supplied with 1/4” BSP Quick Release bayonet fitting • Ideal for panel and cabinet assembly Ex.vat: £74.96 Code: 953415 140 Compressors 04.indd 140 Ex.vat: £45.80 Code: 340379 • Fires 18 gauge T-headed nails 10-30mm • Fires 18 gauge narrow crown staples 15-32mm • Low air consumption - can be used with 25 litre tank compressors • Easy to load and with depth adjustment control • Supplied with 1/4” BSP Quick Release bayonet fitting and storage case Inc.vat Ex.vat Code Replacement Firing Pin £6.96 £5.80 340380 £89.95 Specifications - Workshop Air Nailers & Staplers AW50N Model AWHP Trade Rating Trade 1/4” BSP Inlet 1/4” BSP 100 Nails Load Capacity 100 Nails 60 - 95 psi Operating Pressure 95psi 4.5cfm Air Consumption 4cfm -1.4kg Weight 0.8kg £54.96 T50P Trade 1/4” BSP 100 Nails 70 - 120psi 4.5cfm 2.1kg AW32NSAWMN TradeTrade 1/4” BSP 1/4” BSP 100 Nails / Staples 80 Nails 60 - 95psi 85 - 115psi 3.5cfm 5cfm 1.4kg3.2kg *SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406 26/11/2014 12:05 Workshop Air Nailers & Staplers Accessories Axminster Air AWMN Air Masonry Nailer • Drives hardened 25-64mm nails into a variety of hard surfaces • Easy loading 80 nail magazine, sight gauge included • Perfect for 1st or 2nd fix operations, inside or outside use • Full safety features and strongly built for on site use • 1/4” BSP female inlet, runs on 25lt capacity compressor BULK PRICING AVAILABLE on all nails and staples £94.96 See online at axminster.co.uk or call 03332 406406 for details Ex.vat: £79.13 Code: 340392 24 Gauge Headless Pins - Box 10,000 Inc.vat Ex.vat Code Replacement Firing Pin £8.46 £7.05 340393 Inc.vat Ex.vat Code 12mm £5.46 £4.55 502472 15mm £6.46 £5.38 502473 18mm £7.45 £6.21 502474 20mm £8.46 £7.05 502475 18 Gauge T Head Nails - Box 5,000 Axminster Air 6-22 Air Stapler Inc.vat Ex.vat Code 10mm £3.46 £2.88 340345 15mm £4.26 £3.55 340346 20mm £5.46 £4.55 340347 25mm £6.25 £5.21 340348 30mm £7.75 £6.46 340349 35mm £8.46 £7.05 340350 40mm £8.95 £7.46 340351 50mm £10.96 £9.13 340352 • Trade rated for continuous use • Fires 20 gauge wide crown staples from 6 to 22mm long • Perfect for upholstery use, thin boards and panels • Fitted with a swivelling exhaust air vent • Supplied with 1/4” BSP bayonet £41.95 3 Ex.vat: £34.96 Code: 100238 16 Gauge T Head Nails - Box 2,500 Inc.vat Ex.vat Code 25mm £5.76 £4.80 340317 32mm £6.76 £5.63 340326 38mm £7.75 £6.46 340330 50mm £9.46 £7.88 340344 13 Gauge Masonry Nails Axminster Air 9040L Air Stapler Inc.vat Ex.vat Code 38mm £8.95 £7.46 900127 45mm £10.45 £8.71 900128 50mm £11.46 £9.55 900130 64mm £13.45 £11.21 900136 • Heavy duty, trade rated stapler • Fires narrow crown 18 gauge staples up to 38mm long • Good for stapling hardboard, thin ply and similar • Supplied with swivelling exhaust air vent and safety latch • Supplied with 1/4” BSP bayonet fitting £54.96 20 Gauge Narrow Crown Staples - Box 5,000 Inc.vat Ex.vat Code 10mm £3.76 £3.13 340338 13mm £4.26 £3.55 340339 16mm £4.96 £4.13 340340 19mm £5.76 £4.80 340341 Ex.vat: £45.80 Code: 200433 20 Gauge Wide Crown Staples - Box 5,000 Air Tool Oil A high quality lubricating oil specially designed for use with air tools and supplied in a one litre bottle. Inc.vat Ex.vat Code Air Tool Oil 1 litre £14.95 £12.46 200611 Airline Reel 6-22 Trade 1/4” BSP 100 Staples 65 - 95psi 4cfm 1.25kg 9040L Trade 1/4” BSP 100 Staples 60 - 100psi 4cfm 1.5kg • 20 metres of high pressure airline stored on a hose reel • Fibre reinforcement gives 12 bar working pressure • Separate hose with rotary seal for connection to compressor • Much longer life than loose airline hose • Supplied with Quick Release bayonet fittings • Top quality, made in Germany Inc.vat Ex.vat Code 6mm £3.46 £2.88 340310 8mm £3.96 £3.30 340311 10mm £4.45 £3.71 340312 13mm £4.96 £4.13 340313 16mm £5.95 £4.96 340314 19mm £6.46 £5.38 340315 22mm £6.96 £5.80 340316 18 Gauge Narrow Crown Staples - Box 5,000 Inc.vat Ex.vat Code 16mm £8.46 £7.05 340332 19mm £9.96 £8.30 340333 22mm £10.45 £8.71 340334 25mm £11.95 £9.96 340335 Inc.vat Ex.vat Code 32mm £14.46 £12.05 340336 38mm £15.96 £13.30 340337 Airline Reel 20m £49.96 £41.63 110163 Call free 0800 371822 Mobile friendly 03332 406406 Order online axminster.co.uk/compressors Engineering 01.indd 141 141 26/11/2014 10:59