Download Denon DVD-2800II Operating instructions
Transcript
DVD VIDEO PLAYER DVD-2800 OPERATING INSTRUCTIONS MODE D'EMPLOI INSTRUCCIONES DE OPERACION FOR ENGLISI I READERS P/'_GE 6 PAGE 49 POUR LES LEGTEtJRS FRANCAIS PAGE 50 PAGE 93 _ARALEGTORESDE PAGINA 94 - PAGINA 137 Downloaded From Disc-Player.com Denon Manuals ES_ANOL IMPORTANT TO SAFETY NOTE: This DVD video player uses the semiconductor laser ]o allow you to enjoy WARNING: TO PREVENT EXPOSE FIRE THIS OR SHOCK APPLIANCE HAZARD, TO RAIN DO music at a stable operation, it is recommended to use this in a room of 5 "C(41°F) 35°C(95°F) NOT OR MOISTURE. CAUTION: USE CAUTION: 1. Handle Do not damage When supply cause from the power electric wall outlet, electric occur, contact 3. Do not place anything Do not pl_ce metal supply shock cord If it is damaged or malfunction be sure to remove when or used by holding the plug THE COMPACT OR SPECIFIED REFORMANCE HEREIN OF MAY RESULT EXPOSURE, DISC PLAYER SHOULD REPAIRED BY ANYONE PERSONNEL. shock This device shock, do not open the top cover your DENON NOT BE ADJUSTED EXCEPT PROPERLY QUALIFIED cause inside objects or spill liquid inside or malfunction OR SERVICE on the rating label Model No with the DVD video player harmful interference interferencer recewed, undesired Part 15 of the two conditions: alld (2) this including FCC Rules (1) This device must interference Operation device that may accept may is not any cause operation may result record and retain the Model shown complies subJeCt to the following DEALER This Pleaser RADIATION THOSE the top cover In order to prevent Electric ADJUSTMENTS THAN and not by pulling the cord 2. Do not open If problems OR OTHER cord carefully or deform it may removing attachment CONTROLS IN HAZARDOUS the power deformed, OF PROCEDURES DVD 2800 name and serial number of your Serial No set Class Canadian Cet B digital Interference appareil exEgences • FOR apparatus Causing numedque de du R®glement CANADA meets Equipment la classe sur le mat®del MODEL all requirements of the Regulations B respecte brouiileur routes les du Canada ONLY CAUTION TO PREVENT PLUG CAUTION: TO REDUCE DO NOT USER THE RISK REMOVE SERVICEABLE SERVICING OF ELECTRIC COVER TO (OR PARTS INSIDE. flash an equilateral triangle, presence the sufficient shock with arrowhead is intended of uninsulated product's WIDE BLADE OF • POUR LES MODELE CANADIENS UNIQUEMENT SERVICE magnitude symbol, "dangerous enclosure to constitute withill to alert the user to that voltage" may be of POUR LAME EVITER LES CHOCS ELECTRIQUES, LA PLUS LARGE DE LA FICHE CORRESPONDANTE FOND DE LA PRISE INTERODUIRE LA DANS LA BORNE ET POUSSER JUSQU' AU a risk of electric to persons The exclamation ,_ MATCH INSERT ATTENTION The lightning within SHOCK, FULLY NO REFER PESONNEL. the SLOT, SHOCK, BACK). QUALIFIED ELECTRIC TO WIDE point within important _s intended operating to alert instructions in the arl equilateral triangle and user maintenance (servicing)of the to the presence literature accompanying the appliance Downloaded From Disc-Player.com Denon Manuals 2 FRONT PANEL PANNEAU AVANT PANEL FRONTAL t) el ) _ r"_-4 _ M REAR PANEL PANNEAU ARRIERE PANEL TRASERO \ AUOl_ 01_I_AL0UT mira Downloaded From Disc-Player.com Denon Manuals 3 SAFETY INSTRUCTIONS Read Instructions should 2 3 Retain Instructions should be retained Heed Warnings operating 4 - All the safety be read before and operating the appliance - The safety and operating for future reference - All warnings instructions Follow Instructions should be foflowed should 12 instructions is operated - All operating and in the 14 Cleaning - The recommended use instructions 15 Power Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, m a wet swimming pool, and the like 6 6A basement, 16 or near a An appliance and cart combination should be moved with care 17 - The appliance should be only as recommended by the should be situated not interfere with so that its its proper 18 19 openings; or, placed Sources should be situated away - The appliance should from Grounding or Polarization that the grounding not defeated heat - Precautions or polarization should be taken so means of an appliance _NEC SECTION _102_) POWER SERVICE GROUNDING _NEC ART 25O, PART H) Downloaded From Disc-Player.com Denon Manuals to a in the operating ELECTRIC SERVICE 4 is is of the mast and unit, connection to grounding for the grounding electrode is Object and Liquid Entry - Care should Damage Requiring Service - are not The be taken spilled appliance so that into the should be service personnel when: cord or the plug has been damaged; does not appear to operate exhibits a marked change in performance; or E The appliance has been dropped, or the or other be connected power supply only of the type described instructions or as marked on the appliance 11 away Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long D The appliance or into the normally or enclosure damaged 20 Power be located B Objects have fallen, or liquid has been spilled appliance; or C. The appliance has been exposed to rain; or in a built-in sources such as radiators, heat registers, stoves, appliances (including amplifiers) that produce heat 10 should with regard to proper grounding serviced by quafified A The power-supply installation, such as a bookcase or cabinet that may mTpede the flow of air through the ventilation openings Heat - The appliance antenna lines objects do not fall and liquids enclosure through openings ventilation For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may 9 cleaned only as period of time Ventilation - The appliance location or position does ventilation and See Figure A may cause the appliance should be location of antenna-discharge electrodes, and requirements Wall or Ceiling Mounting mounted to a wall or ceiling manufacturer block be supporting structure, grounding of the leadqn wire to an antenna-discharge unit, size of grounding conductors, the appliance and cart combination to overturn 8 should Outdoor Antenna Grounding - If an outside antenna connected to the receiver, be sure the antenna system information Quick stops, excessive force, and uneven 7 cords grounded so as to provide some protection against voltage surges and built-up static charges Article 810 of the National Electrical Code, ANSI/NFPA 70, provides Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer surfaces Powepsupply by the manufacturer Lines - An outdoor From power 5 - attention to cords at plugs, convenience receptacles, the point where they exit fTom the appliance to and Protection routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular instructions on the appliance be adhered PowepCord Servicing appliance - The user should not attempt beyond that described in instructions All other servicing qualified service personnel should to service the the operating be referred to NOTE ON USE / OBSERVATIONS RELATIVES A L'UTILISATION / NOTAS SOBRE EL USO • Do not let foreign • Keep the set free from moisture, water, and dust Allow for sufficient installed heat dispersion when suffisaHte dans contre I'humidite, • No • Mantenga deje ob]etos extranos dentro del ber_zene, and equEpo el equipo libre de humedad, agua y polvo • Eviter des temporatures Tenir compte I'appareil Ireau et lapoussiere on a rack etrangers I'appareil • Proteger • Avoid high temperatures obJeCts in the set • Ne pas laisser des ob]ets elevoes d'une dispersion de chaleur Iors de Irinstallation • :;7¸¸ ::v sur une etagOre • Evite altas temperaturas Permite la suficiente dispersion ciJando est8 instalado del calor en la conso]a • Do not thhlner • Unplug the power cord the set for long periods • Debrancher le West pendaHt de Iongues periodes le cordon unplugging Tenir la prise ]ors du debranchement avec cordon de energla Sostenga el enchufe el cordon de energ/a without holder cuando desconecte / Droits d'auteur broadcast, contact et des un diluant el contacto y diluyentes de insecticidas, con el equipo cuando • Never ventilation • Ne pas obstruer • No obstruya the ventilation les trous los odficios disassemble or modify the set in any way holes) • Ne • DO not obstruct It is prohibited erl benzene tiempo con cuidado • • No permita gasolina de energ[a du the set avec fappareil utilise du /For sets with Copyrights mettre with / ij I cordon el pas insecticides, pas pot mucho in contact the cord d'alimentation precaution • Maneje • Ne insecticides, cord carefully Hold the plug when • Manipuler el cordon el equipo not using d'alimentation I'appareil no utilice • Handle the power cordon Iorsque • Uesconecte / when of time let come holes jama]s IIappareil d'aeration demonter d'une • Nunca desarme de ventilaciOn maniere ou modifier ou dIulle o modifique autre el equipo de RlnguAa manera / Derechos de Autor by law to reproduce, rent or play discs in public the consent of the copyright • La reproduction, la diffusion, la • De acuerdo location, le prGt ou la lecture publique prohibido de cos disques sont interdits sans le consentement du detenteur des droits d'auteur interpretar con las leyes esta reproducir, emitir: alquilar o discos en pOblico sin la autodzacion del propietado derechos de autor de los Downloaded From Disc-Player.com Denon Manuals 5 l:l_[_ll!._ :I -- TABLE OF CONTENTS -- Features ....................................................................................... 6 @ Playing Repeatedly .............................................................. Discs ............................................................................................ 7 @ Playing Tracks in the Desired Order .......................................... 26 Cautions on Handling Discs ......................................................... 8 Playing Tracks in the Random Order ......................................... 27 Connections ........................................................................ 24, 25 9 - 13 MP3 Playback ...................................................................... Part Names and Functions .................................................. 13, 14 Using the Multiple Audio, Subtitle and Angle Functions .30 Remote Control Unit ............................................................ 15, 16 Using the Menus ................................................................. 33, 34 17 @ Changing the Default Settings .......................................... 35 - 47 Loading Discs ............................................................................ Playback ............................................................................ 18 - 21 Using the On Screen Display ..................................................... 22 Adjusting the Picture Quali_ ..................................................... 23 Troubleshooting 28, 29 32 ......................................................................... 48 Main Specifications .................................................................... 49 • ACCESSORIES Please check to make sure the following items are included with the main unit in the carton: (1) Audio video cord ............................................................ 1 (4) AC cord ..................................................................... 1 (2) Remote control unit (RC-546) .......................................... 1 {5) Operating instructions 1 (3) "AAA" 2 {6) Service station list ......................................................... [] (R03) batteries ................................................... 1 FEATURES 1. Progressive Scan circuit "Pure The DVD-2800 Scan circuit movies is equipped "Pure Progressive TM'' (NOTE with a high precision Progressive TM'' allowing and other 1) dimensional Progressive it to images on DVDs with a quality extremely reproduce near that of 2. High 6. quality thanks to a 12-bit 4:4:4 video D/A The converter With progresswe images, and oversampling D/A converter brightness oversampling of brightness of colors signals is conducted, with 12-bit processing signals to achieve signals and a 54 MHz is included for the images with all the beauty DVDs are meant to provide 3. CD-R/RW playback The DVD-2800 recording can also play is equipped faithful D/A conversion further enhances number The output with of the a 24-bit range and distortion for high bitstream quafity output 24-bit data of audio performance sound for This as the and makes full use of provided by a high rates is compatible with When a Dolby Digital decoder Downloaded From Disc-Player.com Denon Manuals Dolby Digital bitstream the three- _E by connecting or concert is recreated sense of presence, as hall format _ for e wE_ DVD DTS video a commercially _E_s_ DTS m o_t_t sound available r can a_ be DTS decoder and AV amplifier 7. Many convenient (1) Multiple functions audio function of up to 8 audio languages of languages offered differs flom DVD to from DVD to DVD) subtitle function of up to 32 subtitle (The number of languages languages offered differs DVD) (3) Multiple angle function The angle of view can be changed (For DVDs on which multiple angles are recorded) (4) Playback disable function do not want is connected, of the sound in a strong compatibility co_ enjoyed This function compatibility 2) DVD-2800 is audio Selection D/A converter high quality of bits and high sampling 5. Dolby Digital (NOTE (new D/A converter such aspects S/N ratio, dynamic possibilities DVD_2800 optional (2) Multiple 96 kHz 24-bit The DVD-2800 the discs media) 4. High precision output (The number CD-R and CD-RW resulting 3) Selection compatibility and positioning in a movie theater DTS bitstream (NOTE picture sense naturally, if you were the original 6 ................................................... can be used to disable playback children to watch of DVDs you I:I_[_ II _'I-"I NOTES: 1 "Pure 2 Manufactured Progressive" "Dolby" 3 [] of Silicon Image, Dolby Laboratories and the double_D Laboratories Dolby is a trademark under license from Confidential Laboratories "DTS" symbol Inc are trademarks unpublished works of Dolby ¢_1992 - 1997 All rights reserved is a trademark of Digital Theater Systems, Inc DISCS • The types of discs listed on the table below The marks are indicated can be used on the DVD-2800 on the disc labels or jackets Usable • Recorded discs Mark (logo) Disc size signals The following types of discs cannot DVDs with region DVD video DVD audio (NOTE 1) 12cm Digital aLidio e digital video (MPEG2) VIDEO numbers other than "1" or "ALL" DVD audio discs (NOTE 1) DVD-R/RW cm DVD-ROM/RAMs CVD 12cm Digital audio digital video (MPEG1) Video CD be played on the DVD-2800: SVCD CD-ROMs VSDs cm (Only MP3 file can be played) CDVs (Only the audio parL can be played ) 12cm CD-Gs (Only the audio is output) DIGITAl.AUDIO CD CD R CD RW Photo CDs (NEVER play such discs on the DVD 2800) Digital audio MP3 If you attempt (NOTE 2) to play photo CDs, the data on the disc may be damaged Ollln'AI. AUnlO CrTI OlDM_L AUDIO NOTE 1 : Video part which based on DVDwideo specification only can be played NOTE 2: According to recording quality, some CD_R/RW cannot be played • Disc terminology • Titles and chapters DVD-videos (DVD-videos) are divided • Playback into several large sections called "titles" and smaller sections called "chapters" Numbers are allotted to these sections These numbers called "title numbers" and "chapter control are information, In this manual, referred to "menu words "playback with a function for selecting etc, playing Video CDs with Title 2 the are equipped menus on the TV screen displaying For example: (video CDs) CDs including disc or jacket numbers" Title 1 Video controfi' on the for displaying the desired position, in dialog fashion video CDs using such menus is playback" playback control can be used on the DVD- 2800 1 Chapter 2 NOTE: • This DVD video manufactured • Tracks (video and music CDs) Video and music CDs are divided into sections called "tracks" Numbers called "track to these sections These numbers are numbers" player DVD Region Region disc number does number is designed respond Management Information on a DVD disc If the are allotted to to the that is recorded described not correspond of this and Region DVD video on the to the playen this DVD video player cannot play this disc For example: The Region number for this DVD video player is 1 1lack 1 Track 2 -b 1lack 3 d- Track 4 -I_ 1lack 6 q- - Downloaded From Disc-Player.com Denon Manuals 7 l:l_[_ll!._ :I [] CAUTIONS Only the discs ON HANDLING including the marks shown DISCS on page 7 can be played on the DVD-2800. Note, however, that discs discs, hexagonal discs, Do not attempt to etc) with special cannot play such shapes • Be especially careful from their cases (hearbshaped as they may damage grease or dirt on discs not to scratch discs when removing them • Do not bend discs. be played on the DVD-2800 discsr • Do not get fingerprints, the player • Do not heat discs • Do not enlarge the center • Do not write hole on the labeled (printed) side with a bdFpoint pen or a pencil • Water Avoid touching them the surface of discs when loading and unloading droplets suddenly from hairdryeh etc, • Always may form on the surface if the disc is moved a cold one place to a warm Do not use a to dry the disc eject discs after playing them. • Keep discs in their cases to protect them from dust, scratches and warping Be careful not to get • Do not put discs fingerprints on the signal surface (the side which shines in rainbow in the following 1 Places exposed 2 Humid colors) Fingerprints quality dirt • or dirt on the disc may lower or cause breaks in playback Wipe to heat from heaters, available wipe off fingerprints of time etc sound and picture off fingerprints or • Only load one disc at a time may result in damage Use a commercially for long periods or dusty places 3 Places exposed • places: to direct sunlight disc cleaning set or a soft cloth to • Load 8 cm discs adapter or dirt Loading one disc on top of another or scratch securely the discs in the disc guide, without If the disc is not properly loaded, using an it may slip out of the guide and block the disc tray • Be careful not to let your fingers get caught when the disc tray is closing • Do not place anything • Do not load cracked fixed with adhesive, but discs in the disc tray or warped • Do not use discs on which / Wipe gently from the middle Do outwards not wipe with a circular motiorl NOTE: • Do not use record spray or antistatic Also do not use volatile chemicals such as benzene or thinner Record Thinner spray Downloaded From Disc-Player.com Denon Manuals 8 Benzene discs or discs that have been etc the adhesive part of cellophane tape or glue used to attach the label is exposed, or discs with traces of tape or labels that have been peeled off Such discs may get stuck inside the player, resulting in damage I:I_[_IIKI-" I [] CONNECTIONS NOTES: • Read the manuals of all the components when making • Be sure to connect connections left and right channels properly, L (left) to L, R (right) to R • Keep the power cord unplugged until all connections have • Plug been completed • If the power the is on when be generated the power Incomplete connections are made, noise may securely result in humming the TV's video input connector into the power outlet may result in noise • Binding the power cord together and damage the speakers • Use the included audio video cord to connect or S_VIDEO OUT and AUDIO OUT cord connection with connection cords may or noise and audio input connectors to the DVD-2800's ]o power VIDEO OUT outlet DVD-2800 S-Video output The video connector signals are divided into color (C) and brightness (Y) signals, achieving a clearer If the TV is equipped with recommend output connecting connector connection picture an S-Video input connectoT, it to the DVD-2800's using a commercially we S-Video available S-Video cord NOTES: • Connect directly VCR the DVD_2800's or through (video video an AV amplifier cassette recorder) outputs to the TV either Do not connect Some discs contain it via a copy prohibit signals if such discs are played via a VCR, the copy prohibit system may cause disturbance • Set the comply formated "TV TYPE" in "VIDEO SETUP" with your TV's video format set to NTSC When in "SETUP" to the TV is NTSC (See page 41) in the picture Downloaded From Disc-Player.com Denon Manuals 9 Color component output connectors (PR/CR, PB/CB and Y) The red (PR/CR), blue (PB/Crs} and brightness reproduction • The color component input connectors Y, B-Y and Y/CR, CB and Y, etc) Connect (Y) signals are output independently, achieving more faithful o[ the colors may be marked differently on some TVs or monitors For details, refer to the TV's operating in this way if your TV is compatible with Progressive (PR, PB and Y/R- instructions Scan. DVD_2800 ]u power i outlet i NOTES: • Use tile three commercially available video cords to connect the DVD_2800's color component output connectors to the TV or monitor • Set the "TV TYPE" in "VIDEO NTSC • Set the **VIDEO OUT" in "VIDEO CONSUMERS NOTE THAT PRODUCT PROBLEMS, in "SETUP" SHOULD SETUP" NOT AND MAY CAUSE ARTIFACTS iT iS RECOMMENDED Downloaded From Disc-Player.com Denon Manuals 10 SETUP" to comply with your TV's video format When the TV is NTSC formated set to (See page 41) in "SETUP" to comply ALL DEFINITION HIGH TO BE DISPLAYED THAT THE USER SWITCH with Progressive TELEVISION IN THE PICTURE TV (NTSC formated SETS ARE FULLY only) COMPATIBLE IN CASE OF 525 PROGRESSIVE THE CONNECTION TO THE **STANDARD WITH THIS SCAN PICTURE DEFINITION" OUTPUT I:I_[_ II _'I-"I When DVDs recorded in Dolby Digital or DTS are played, Dolby audio output connectors If a Dolby Digital or DTS decoder of a movie theater or concert hall Digital or DTS bitstream is connected, signals you can achieve are output from the DVD player's sound with the power digital and sense of presence TV DVO28oo, Vl_ - To power outlet AClN AUOIO Dla_TaL OUT VIDEO _q Front speaker (right) Front speaker (left) (commercially available) Optical fiber cable G sommercially available) 75 ohms pin-plug cable 4LJ Subwoofer Digital audio input Digital audio input connector (OPTICAL) connector (COAXIAL) 0 Surround _eft) I .... [ __ I N I _ _ _ _ _ _ _ _ _ JOO_ speaker (right} AV amplifier witb a built in decoder (AV control center) NOTES: • Set the "TVTYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format Wherl tho TV is NTSC forrnated, setto NTSC (See page 41 .) • Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using a decoder, etc, that is not DTS compatible • Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL) NOTE: • Store the dust cap in a safe place, and be careful not to lose it Dust cap When not using the terminal, the terminal from dust attach the cap to protect Remove the dust cap, line up the cable in the proper directly, then securely as far as itManuals goes Downloadedinsert From itDisc-Player.com Denon 11 l:l_[_ll!._ :I • Sound output from the DVD-2800's digital audio output connectors Re_rto Settings Audio recording Digital audio data output page format Digital out : Normal Dolby Digital out : PCM conversion Digital bitstrearn Doiby Digital 2 channels PCM data (48 kHz/16bit) 42 DTS bitstrearn Digital out : Normal Digital out : PCM conversion No output data LPCM conversion mode : OFF 48 kHz/16 24 LPCM conversion mode : ON 48 kHz/16 bit PCM LPCM conversion mode : ON 48 kHz/16 bit PCM CP:ON LPCM conversion mode : OFF No output data (when CP : OFF LPCM conversion mode : OFF 96 kHz PCM (when DTS DVD video DVD audio (video bit PCM 48 kHz part only) O 96 kHz 43 © Video CD Music MPEG CD Linear MP3 CD 1 PCM MP 3 • Linear PCM audio is the signal recording While the signals are recorded format 441 kHz/16 bit PCM 441 kHz/16 bit PCM 32 48 kHz/16 "OFF" is selected, Set the "AUDIO SETUP" OUT" "LPCM SELECT" Playing digital signals are not output default setting as shown from the digital audio output below (See at this time TV -> "PCM" -_ "ON" DVDs with incorrect seWngs may result noise that could damage your ears or the speakers • Set the "TV TYPE" in "VIDEO SETUP" in **SETUP" comply with your TV's video format When the TV is NTSC formated, set to NTSC (See page 41 ) AUDIO o_ • BIG_TALgUT I1 m Digital Downloaded From Disc-Player.com Denon Manuals 12 audio input bit PCM at 48 kHz/q 6 bit to 96 kHz/24 bit, providing page 43) • "DIGITAL not copy protected) used for music CDs a[ 44 1 kHz/16 bit for music CDs, for DVDs they are recorded higher sound quality than music CDs • When copy protected) connector / tCOAXlAL) _UT I:h_[_ II _'I-"I DVD 2800 A_10 D_TAL_UT VIDE0q [q] = Stereo component o °© © l o ©@© © NOTE: • Set the "TV TYPE" in VIDEO (See page 41 ) [] PART NAMES SETUP in "SETUP to comply with your TV's video format When tho TV is NTSC formated AND FUNCTIONS See page 3 PLAY _i_ • Press this button to play the disc Power button • Press once to turn the power on • Press again to set to the position and turn the • Press images power POWER button power to the standby on the mode remote O Power unit the while the 0 the @ Skip is on button on the remote mode by pressing control unit power lights when the power is on and when button frame (11 STILL/PAUSE) to pause images by frame or music or to play (See page 20 21 ) STOP button (111STOP) • Press this to stop the disc (See page 20) button (14141) back to the begmning • Press again to move back to the beginning the track (or chapter) mode _i) HDCD indicator • This indicator lights when HDCD _ format (NOTE 1) playing discs recorded of the current Slow/Search reverse button ® Skip button • Press • Lights when progressive is selected as the video output direction this to • Load discs here ® (See page 17) • Press the OPEN/CLOSE button _ Slow/Search disc tray when the PLAY button pressed button • Press this but[on (_ OPEN/CLOSE) to open and close the disc tray Downloaded From Disc-Player.com Denon Manuals _ is ® ® Remote play mode (See page 20 move and to search in the 21 ) ahead to the button direction beginning of the next (See page 21 ) (Ibis) • Press this to set the slow to open and close the forward • The disc tray is also closed (41<1) (1_1_1) track (or chapter) Disc tray of the previous (See page 21 ) • Press this to set the slow in Scan indicator OPEN/CLOSE this button (See page 18) track (or chapter) is in the standby _]_ Progressive (1_ PLAY) • Press this to move indicator • This indicator _) by pressing control • Turn the power on from the standby POWER button STILL/PAUSE "OFF" power off • Set the set to NTSC play mode and to search Jr] the (See page 20 21 ) control sensor Display • Information or] the disc that is currently playing is shown on the display (See page 14) (See page 17) 13 l:l_[_ll!._ :I NOTE 1: rHDCD ;-_,High Definition Compatible Microsonics _Mare either registered Pacific Microsonics, Inc in the countries HDCD system M[crosonics, following: In 5,808,574, Australia: _) the Audio Digital audio available connectors output output using 5,872,531, and in output • Connect (AUDIO _) OUT) S-Video connector (OPTICAL) in stores _) pin-plug (S-VIDEO OUT) • Connect using video cords (available in stores) (COAXIAL) Connect connector Component video output connectors (COMPONENT VIDEO OUT) from this connector connector output • Connect using an S-Video connection cord (available in stores) audio video cord an audio cord 75 £_/ohms • Digital data is output Video 5,864,311, of the 5,640,161, using an optical fiber cable (available audio • Connect _) 5,683,074, pending using the included • Digital data is output Digital flom Pacific by one or more 5,479,168, 5,854,600, output • Connect _) under license _s covered Other patents and Pacific ",_m_ll • Connect (]_ USA: 5,838,274, 669114 [_] I:_II manufactured Inc This product Digital trademarks or trademarks of United States and/or other Power input a commercially • Connect to AC power supply using the included AC cord cord from this connector connectors (VIDEO using the included OUT) audio video cord Lights during playback, flashes when the resume play memory function is activated Lights in the still/pause mode l Lights in the repeat play mode ii D _D -ANGLE PHOG. T':" .".F."-".F-"T':" .".F."T" 'T':" T" "T':" .".F." "'i i'l[i "."i|" i"11 i."i'i "."i" • i."i "."i!" • "'i T........................ I I......................... I i'l,i I 96kHz24bit -- k The title and elapsed track time are displayed here during playback The title/chapter number is displayed here for DVDs, the track number for video and music CDs Lights in the programmed play mode Lights during playback of multiple angles disc Lights when a DVD is loaded Downloaded From Disc-Player.com Denon Manuals 14 in the disc tray I linear PCM sound ights during playback of 24 bit Lights during of linear playback PCM sound with a sampling frequency of 96 kHz I:Ii_[,.'.]II[_]-"I [] • REMOTE CONTROL The DVD-2800 (1] Remove car] be controlled the remote control UNIT from a distance using the included unit's rear cover remote control Cautions unit (RC_546) On Batteries • Use "AAA" (R03) batteries • Replace the batteries in this remote with control new ones approximately a year, though this depends on the frequency the remote control unit is used • If the remote control unit unit does not operate the main unit, replace the batteries once with which flom close to with new ones, even if less than a year has passed • The included _2} Place two "AAA" in the direction (R03) batteries indicated in the battery Replace compartment • When by the marks battery is only for verifying it with a new battery inserting the batteries, proper direction, remote control unit's battery • To prevent following damage be careful the or battery remote _CIose • If the the rear cover the batteries • When when should of batteries heat or dispose not planning • The the control sensor remote distance to of use the if the the • The however, remote remote remote angle control off the fluid then insert control as shown unit can if there unit point unit, or] the be are from This a direct distance obstacles is not it at the diagram used 7 meters control control wipe compartment, remote of approximately be shortel, or leak, carefully of the battery operating remote _. types control unit for a long period of time from the inside new batteries Approx 7 meters in the fluid leakage: disassemble, batteries marks with an old one • Do not use two different • Remove to do so in the (_ and _ compartment • Do not use a new battery • Do not short-circuit, batteries in flames operation as soon as possible in the pointed will way directly at sensor control unit of up to 30 with can be operated respect to the at a horizontal remote control sensor NOTES: • It may be difficult to operate the remote control unit if the remote control sensor is exposed to direct sunlight or strong artificial light • Do not press buttons on the main unit and on the remote control unit at the same time Doing so will result in malfunction Downloaded From Disc-Player.com Denon Manuals 15 POWER button (POWER) Press this to switch between DISPLAY button Press this to display the power the ON SCREEN on and standby t i MENU button OPEN/CLOSE button MENU (OP/CL) (MENU) SUBTITLE i TOP (DISPLAY) button (TOP MENU) k button (SUBTITLE) Press this to switch the DVD's subtitle language Cursor buttons Use the • and • buttons the vertical direction to select Use the _1 and I_ buttons the horizontal in to select ANGLE button (ANGLE) Press this to switch in the ar_gle direction SLOW/SEARCH AUDIO _or button DMDs _dJo r press _is _g_ge this to switch "LR", "L" ENTER _o F0_ s_vitct_ vJde_ _e aDs the cha_nel r RETURN press t STILL/PAUSE t PLAY button button (||) (1_) (SKIP) CLEAR button Number to the previous (ENTER) buttons i STOP (RETURN) Press this to return menu screen Press the EN[ER button to select the item selected with the cursor buttons I SKIP button between and "R" button buttons (SLOW/SEARCH) (AUDIO) button (CLEAR) Press this to clear numbers have input (at) that you buttons CALL Use these to iIIput numbers Use the +10 button to input numbers of 10 or over Example: button (CALL) Press this to check the program contents To input 25 [NON PROGRAM/DIRECT RANDOM button (RANDOM) Press this to play the tracks on the video or music CD in ral_ldol3] order button (PROG/DIRECT) Press this to switch normal between play, programmed the play NTSC/PAL Use this to switch output i SET UP button (SET button (V.S.S,) Sets tile viltual surround (A-B soufld (Functions when playing DVDs recorded in Dolby Digital with two or more channels) REPEAT button (REPEAT) Press this to play tracks repeatedly Downloaded From Disc-Player.com Denon Manuals 16 forn%t (NTSC/PAL) the set's video (NTSC/PAL) UP) A-B V.S.S. button REPEAT button REPEAT) Use this to repeat sections two specific points between l:!_[_ | F-'I-" I This set has the following SETUP" These presettings presettings: have been preset "DISC SETUP", upon shipment "OSD SETUP", from the factory "VIDEO SETUP", "AUDIO If you wish to change them SETUP", "RATINGS"r to suit your specific and purposes, "OTHER refer to pages 35 to 47 [] • LOADING Set discs DISCS in the disc tray with the labeled (printed) side facing [_ll#_J_,j I,]'L"-_ up • Pick up the disc carefully so as not to touch the signal surface and hold it with the labeled side facing • With up the disc tray fully open, set the disc in the disc tray • Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in 12 cm disc guide the inner tray guide (Figure 2) 8 cm disc guide • Press the loaded OPEN/CLOSE button • The disc tray can also be closed / by pressing The disc automatically is automatically to load the disc the PLAY button Disc tray Figure 1 NOTE: • Do not move the DVD-2800 so may scratch [t}] _ while a disc is playing Doing the disc _m[_-_] ,1,'_ ,_ t_, 4 (t) Turn on the power (27Press the OPEN/CLOSE button 12 crn disc / j/ / OPEN/CLOSE button Figure 2 / Disc tray NOTES: • Be sure to turn on the power before opening 8 cm disc and closing the disc tray • Do not strike on the button with a pencil, etc NOTES: • If a foreign simply object is caught in the disc tray during closing, press the OPEN/CLOSE button again and the tray will open • Do not press the disc tray in by hand when off Doing so will damage • Do not place foreign damage the power is it objects in the disc tray Doing so will it Downloaded From Disc-Player.com Denon Manuals 17 l:l_[_ll!._ :I [] PLAYBACK 5 1_2,4 o "; --% ...... '_=_ I L _ o,_o:,_ ] m 2,4 Turn ol7 the power • Press the power 1 buttOnr the power indicator lights and the power turns on • When standby remote control mode, unit press the POWER button of Main unit Remote control unit ± 2 Press the OPEN/CLOSE button to open the disc tray \ Main unit Remote control unit J 3 Set the disc in the disc tray J / ± Press the OPEN/CLOSE • For 4 many playback interactive control, use the procedure Interactive stories, button a menu DVDs and video screen appears CDs In this case in step 6 to select the desired DVDs are DVDs including multiple Main unit with Example: For DVDs with screens Remote menu TOP MENU control 1. Opening etc I Banana I 2. 1st movement 3. 2nd movement 4. 3rd movement 5. Ending Downloaded From Disc-Player.com Denon Manuals 18 unit For video CDs with playback item angles, Example: control I:I_[_ II _'I-"I 5 Press the PLAY button Main unit Use the cursor desired (A, T, _1 and I_) to select control unit the item • For some 6 buttons Remote discs there is a second Fflenu screen if so, press the I_1_1 button to display the next menu screen (See the disc's jacket) The cursor video buttons CDs desired Use (A, T, _1 and I_) do not work the number buttons to select for the Remote control unit item Press the ENTER button • The desired item is selected and playback starts • You can return to the menu screen by pressing 7 MENU/MENU this depends button Remote the TOP control unit Example: When "Apple" Es selected while the DVD is playing, though on the disc • Press the RETURN button during CD to return to the menu screen playback TOP MENU of a video Banana I I IlStrawberrYl Apple Peoch IIPineapple I Orange \ NOTES. • If _ operated, appears or] the TV screen that operation while is not possible with that disc buttons are being on the DVD-2800 or • Do not place more than one disc Jr]the disc tray • The disc keeps turning while the menu screen is displayed on the TV screen • Set the disc in the disc guide Downloaded From Disc-Player.com Denon Manuals 19 l:l_[_ll!._ :I PLAY button STOP button ' o _ ..... SKIP buttons _L--_01 STOP button _( STILL/PAUSE button sl SLOW/SEARCH +--_._ _A_,_ PLAY button CO do do Go _ G) STILL/PAUSE buttons button SLOW/SEARCH buttons During playback, control unit, playback <Resume when in the memory the function pressed main unit or the remote "1_" if the it was is pressed, flashes the STOP button, stoppedThe disc tray that position on the display playback resume is opened or the is When the resumes play memory STOP button is Main to continue button • Press the PLAY button playing the disc, to save electricity The resume either control STILL/PAUSE to resume display during unit to set the power to the standby normal button on the the elapsed function only works time is shown for on the playback buttons unit Remote control unit Remote control unit on the main unit Reverse direction I,_1_ / + : Forward direction Main again, the search speed increases • Press the PLAY button to resume normal playback (in four steps) • In some pressed Downloaded From Disc-Player.com Denon Manuals unit NOTE: when 2O unit playback During playback, press one of the SLOW/SEARCH or the remote control unit • When pressed control main unit or the Main : Remote play memory discs for which on the main to turn the power off or press the on the remote playback, press the control unit _1_1 / - unit time press the POWER POWER button mode STOP button after pressing at which is canceled a second on the (DVD only)> the At this time, is pressed position • If you do not want During remote function DVD-2800, PLAY button from the STOP button stops and wall paper is displayed play memory • With the stored press cases one of the the during menu menu screen SLOW/SEARCH may reappear buttons playback on a video CD is I:I_[_ II _'I-"I During playback, control press one of the skip buttons on the main unit or the remote unit /- : 1_1_1/ • A number pressed • When Reverse direction : Forward of chapters direction (PREVIOUS) (NEXT) or tracks equal to the number of braes the button is is skipped the skip beginning back button of the currently is pressed once, the playing chapter pickup returns to the Main unit or track Playing Remote control unit NOTE: position • S In some when cases the menu screen one of the SKIP buttons menu playback may reappear is pressed during on a video CD Reverse direction _ _ Forward direction (direction of playback) remote control unit During playback, press the STILL/PAUSE button on the main unit or the • The picture moves forward one frame each brae the button is pressed • Press the PLAY button In the still mode, or the remote playback : \ buttons "-_ Main unit Remote control unit Main unit Remote control unit on the main unit unit Reverse direction _-_,- / _ : Forward • When pressed normal press one of the SLOW/SEARCH control _1_1 / - to resume __"[_ direction again, the slow • Press the PLAY button play speed increases to resume normal playback NOTE: • Reverse slow play is not possible on video CDs • Using the VSS (Virtual Surround Sound) function gives the sound a sense of expansion even when only front speakers expansion, it also makes it seem as if sound is coming During playback, I (left and right) are used For discs with surround and allows you to achieve signals, the VSS from the sides, even though there are no speakers press surround button on the remote control there unit NOTES: Distance • This function only works with DVDs containing • Note that for some discs the effect surround is best when functions listening of the left and right speakers two or more channels will be weak or there • For some discs the sound may be distorted. • Turn off other effects not only gives the sound Remote control unit theVSS • The effect function will be no effect If so turn the VSS function Speaker mode, etc) at a distance the TV equal to 3 to 4 times (distance Speaker off (the TV's surround from A of Dolby Digital signals 3 to 4 times the distance distance A A) Listening position Downloaded From Disc-Player.com Denon Manuals 21 I:I_[_II[._ :I [] USING THE ON-SCREEN • Use this function to display and change DISPLAY information on the disc (titles, chapters, time, etc) In the play mode, press the DISPLAY button • The On-Screen • The picture Display appears on the TV screen switches each time the button Remotecontrol unit is pressed • The items Example: displayed differ from disc to disc Example: For video and music CDs For DVDs • Normal playback screen • Normal playback screen / • Disc information • Disc information screen screen 02/10 0I:20 TRACK -SINGLE ELAPSED 1 CHAPTER TITLE ELAPSED PICTURE MODE 02/08 0:20:11 STANDARD PICTURE MODE REPEAT A-B REPEAT PLAY MODE AUDIO MODE STANDARD OFF OFF NORMAL L/R • D sc ]rlforwlatEoE] screen / f SUBTITLE AUDIO 01/03 01/03 ENGLISH ENG ON SINGLE REMMN 03:17 ,,I, DOLBY D3/2.1 AUDIOOUTPUT DIGITAL TOTAL ELAPSED 06:10 ,,I, lJJ TOTAL • For the REMAIN on-screen 32:00 display for video CDs and regular CDs, only the disc time changes Use the • and • cursor • The selected buttons to select the item you wish to change item is displayed with a yellow frame (1_ For DVDs "TITLE", 2 "CHAPTER", "TITLE ELAPSED" and "PICTURE MODE" can be selected. 6} For video and music CDs "TRACK", "TOTAL "SINGLE REMAIN" ELAPSED", "SINGLE and "PICTURE MODE" REMAIN", "TOTAL ELAPSED", can be selected Remote control unit Changing the elapsed time Input using the number buttons, then press the ENTER button Example: For 1 minute 26 seconds _ "0126" 3 @ Changing the title, track or chapter • For DVDs <E) Input using the number buttons, then press the ENTER button (For some discs it is not possible to change the tJtJe or chapter) • For video and music CDs <E) bN<! Input using the number Downloaded From Disc-Player.com Denon Manuals 22 buttons Playback starts From that track C) Remote control unit I:I_[_ II _I-"I [] ADJUSTING THE PICTURE QUALITY ..... 2, 5 Press the 1 DISPLAY button, use the • and • cursor buttons to select the "PICTU RE MODE", the ENTER button then press Remote Use the • and • cursor buttons memory, unit to select the picture then press the ENTER button • The display switches as follows: STANDARD _ MEMORY 1 _ MEMORY MEMORY 2 control 3 -_ MEMORY STANDARD (Factory 4 _ 2 MEMORY 5 default) When this is selected, Remote control unit Remote control unit both the picture quality and function are reset to factory setting MEMORY 1 to MEMORY 5 Picture quality stored here settings Select the item to change • CONTRAST, and GAMMA CONTRAST you have adjusted can be using • and T buttons BRIGHTNESS, SHARPNESS, can be adjusted as you like HUE (-6 ~ +6) Adjusts the contrast of the image BRIGHTNESS (0 ~ +12) Adjusts the picture's SHARPNESS brightness Adjusts the sharpness HUE (-6 - +6) Adjusts the balance of the picture of the does not affect Progressive GAMMA Select 3 (black level) (-6 ~ +6) green and red (This Scan images) I LI_HTEI_ I]ARI(EI_ I (-6 ~ +6) this if dark portions of the picture are too dark or bright portions are too bright (This does not affect Interlaced images) • Black Level To select "LIGHTER" LIGHTER the black level or "DARKER" of Remote control unit \ the picture, 17.5 IRE) The black level of the picture is selected to the lighter one Select this connected connector setting normally when the player is to a TV set through the VIDEO OUT or B-VIDEO OUT connector (Factory preset) DARKER (0 IRE) The black level of the darker one Select this setting picture normally is selected when the to the player is connected to a TV set through the COMPONENT VIDEO OUT (Y, PdCB, PR/CR) connector Downloaded From Disc-Player.com Denon Manuals 23 l:l_[_ll!._ :I 4 Use the A,'Ir,_l and il_ cursor picture adjustment quality buttons item then q> to select the to adjust its Remote control unit Remote control unit level \. Press the ENTER button • All the adjustments [] • are stored in the memory PLAYING REPEATEDLY Use this function to play your favorite audio or video sections repeatedly C G d 30o iDdo _G 0© 1 In the play mode, press the REPEAT button • The display pressed, on the TV screen and the corresponding switches each time repeat play the button or stop mode is is set Remote O) For DVDs • Normal 1 @} For video • playback • Chapterrepeated Normal and music corltrol unit CDs playback • Trackrepeated TRACK REPEAT ÷ 4, € • Entire disc • Title repeated DISC BEPEAT repeated • REPEAT • Repeat playback caRceled • OFF Repeat playback canceled J $ To return to normal playback: Return to normal playback by pressing Downloaded From Disc-Player.com Denon Manuals 24 the button REPEAT button until "REPEAT OFF" appears on the TV screen I:I_[_ II _'I-"I _®_ co.co _I02 1 During playback, press the A-B REPEAT button • This sets start point A Remote control unit A TO Press the A-B REPEAT button 2 • This sets starts end point B SET B again B, and repeat playback of the A-B section Remote control unit $ To return to normal playback: Press the A-B REPEAT button until "A TO B CANCELED" appears on the TV screen NOTES: • Repeat playback • The repeat shown may not work playback on the display for some DVDs and A-B repeat playback functions will not work for DVDs and video CDs for which the elapsed time is not during playback • In some cases, subtitles may not be displayed near the A and B points during A-B repeat playback Downloaded From Disc-Player.com Denon Manuals 25 I_[_IG_:I [] • PLAYING TRACKS IN THE DESIRED ORDER Use this function with video and n7usic CDs to play the tracks This function does not affect with DVD in the desired order 3 r_-_-_7 i_o_ _,_1 2 c5o c5_I o ; --% ...... I _=_ In the stop mode, • The program I _ o,20;,3:_ press the PROG/DIRECT selection screen i .... I Im O i button once appears 1 Remote control unit Use the number buttons to select the track number you want to program EX: To program track 5 and track 12: Press 5 (number button) PROGRAM P01:05 03:12 : (Z) (Z) f,I, 2 Press +10 (number button) PROGRAM _o2:i o3:_2 Remote control unit Press 2 (number button) PROGRAM P02:12 06:32 Press the PLAY button • Playback of the tracks in the programmed order begins Main unit $ To return to normal to stop programmed Now press the PLAY button The entire to start normal playback, then press the PROG/DLRECT playback from the beginning button of the disc The program play screen appears Press the CLEAR button to clear the last track in the program program: progran7 is cleared To check the programmed when the power is turned contents, Up to 30 tracks can be programmed Downloaded From Disc-Player.com Denon Manuals 26 unit the program: Press the STOP button To clear the entire control playback: Press the STOP button To clear tracks from Remote off or the disc is ejected press the CALL button The programmed contents are displayed step by step I:I_[_ II _'I-"I [] • PLAYING TRACKS IN THE RANDOM ORDER Use this function with video and music CDs to play the tracks This function does not affect with DVD in random order 2 m2 (oGoc do_c CO(O_ _o_c I _ In the stop mode, • The random .... I,,_ _,_0:,_:_ I press the RANDOM © ml B button play screen appears RA_M 1 "RAN_0M ON " Remote control unit f Press the PLAY button • The tracks start playing in random order Main unit • Random playback To return to normal is not possible Remote contro] unit for some discs playback: Press the STOP button to stop random playback, then press the RANDOM button once Downloaded From Disc-Player.com Denon Manuals 27 I _I_['-III l_']:I [] MP3 PLAYBACK • There are many music distribution as instructed If music recorded software), sites on the internet on the site and written on commercially onto a CD-R/RW available from which music CDs is converted the data on a 12 cm CD is reduced when capacity 5-minute tracks are converted on a computer into about 1/10 the amount data of about 10 music CDs can fit onto a single CD-R/RW Values music files in MP3 format with can be downloaded Music downloaded disc can be played on the DVD-2800 disc a standard into MP3 files using an MP3 encoder of the original data A single CD-R/RW Thus, when disc can contain written (conversion in MP3 format, bit rate of 128 kbps into MP3 files and using a CD-R/RW disc with of 650 MB 3 2, 3 o [_ _ --% ...... I _=_ I _ =,2=:,_:_ I Load the CD-R/RW disc on which the MP3 format music been into flies have written the 1 .... O i 3 f DVDI • When the disc is loaded in the DVD-2800, information 1 [_sc NFOBMA O_I DENON the disc screen appears • If there are multiple folders, • If there are no folders contains 2, 8_ 2800 (See page 18) proceed to step 2 on the disc (if the disc MP3 files), proceed All the folders recorded only _LAYMODE : Ng_MAk SIN_L_ EL,_PSED : --:-- to step 3 on the disc are displayed (The folders are not displayed by layer} F Use the • and • cursor buttons to select the folder E containing the file(s) you want to play, then press the ENTER button 2 Remote control unit To change the folder Use the • cursor button upper right of the screen, to select "ROOT" at the then press the ENTER button The screen in step I reappears desired folder Select the \ Remote control unit Downloaded From Disc-Player.com Denon Manuals 28 the over 100 tracks B28 NFOa_ATON] DENON a I:I_[_ II _']-"I Use the • and • cursor file you wantto buttons to sdecttheMP3 play, then press the PLAY button or ENTER bu_on • Playback starts The display can be switched elapsed time and the pressing the DISPLAY button Programmed between single playback the single remaining is not time possible with by MP3 discs 3 Remote To change the MP3 file Press the STOP button, then cursor buttons the desired to reselect To set the random In the stop mode, use the • control unit and • MP3 file play mode press the RANDOM Then press the PLAY button button or ENTER button To set the repeat mode The repeat mode changes Main each time the REPEAT unit Remote control unit button is pressed NORMAL -_ TRACK REPEAT -_ FOLDER REPEAT t I $ To return to the initial disc information Press the STOP button, select "ROOT" screen use the • cursor button at the upper to right of the screen, then press the ENTER button The screen in step 1 reappears NOTES: • The DVD-2800 compatible is compatible with • It may not be possible • The digital signals presetting source when in the expected writing them The signals are output to 11 characters, of writing software it is possible consisting in a format names including other quality select have no extension (with of 32, 441 or 48 kHz) It is not Layer 3", MP1, MP2, etc dirt, warping, etc into PCM, regardless of whether with the same sampling frequency On the DVD-2800, may change the audio output as that of the music we recommend using MP3 files the position of the folders and the MP3 discs level 1" as the writing software's capital letters, and the .... (underscore) "1SO9660 level 1 ", normal display and playback Macintosh tape, etc, software software format This may not be possible usage instructions folder names and file names on the screen will not be displayed like titles The DVD-2800 can display up mark may not be possible In addition, folder and file properly Files cannotbeplayediftheyhaveanyextensionotherthan"MP3"orifthey computers, of up to 8 capital or numbers • Do not apply stickers, with "1SO9660 For details, refer to the writing of numbers, symbols since the writing are not possible discs, to display other than ordeL • Be suretoaddtheextension"MP3"toMP3files consisting the sound flequency 5 Audio on the CD-R/RW playback MP3 files on CD-R/RW the DVD-2800 • If recorded discs due to disc properties, MP3 files are MP3 signals converLed or "PCM conversion" search and programmed writing (sampling Layer 3", "MPEG-2 bit rates of 128 kbps or greater. with some types • With playing Layer 3" standards Audio the higher an MP3 file's bit rate, the better with order of the files when • When Audio as "MPEG-2 to play some CD-R/RW output • MP3 files may not be played • Manual the "MPEGq standards is set to "normal" • In general, recorded with such other MP3 files and recording can be played by adding the extension to either the label side or the signal side of CD-R/RW a disc, the disc may get stuck inside the DVD-2800 • The DVD-2800 is not compatible with packet • The DVD-2800 is not compatible with write • The DVD-2800 is not compatible with play lists " MP3" after the file name the files on the CD-R/RW) and be impossible discs If adhesive gets on the surface of to eject software ID3-Tag Downloaded From Disc-Player.com Denon Manuals 29 I :I_['-"]III.I: I [] • USING THE MULTIPLE With DVDs containing multiple AUDIO, audio language signals, SUBTITLE AND ANGLE FUNCTIONS the audio language can be switched during playback AUDIO During playback, 1 • The current • S:DOLBY 83/2.T ENG press the AUDLO button audio language number is displayed Remote control unit AUDIO iiX/3:DOLBY D3/2 I FRA Use the • and • cursor buttons to select the desired language • The display turns off when the AU DlO button is pressed Remote control unit NOTES: • With some discs it is not possible to change the audio language during playback In such cases, select fiom the DVD menu (See page 34) • If the desired language is not set after pressing • The language selected in the default settings Downloaded From Disc-Player.com Denon Manuals 3O the • and • cursor buttons (see page 36) is set when several times, the power the disc does not include that language is turned on and when the disc is replaced I:I_[_ II _'I-"I • With DVDs containing multiple subdtle language signals, the subtitle language can be switched during playback ml SU_TITLE 1 During playback, • The current press the SUBTITLE subtitle % button language number is displayed Remote control unit 2 Use the • and • cursor buttons to select the desired language • The display turns off when the SUBTITLE button is pressed Remote control unit NOTES: • If the desired language is not set after pressing • The subtitle language set with replaced If that language • When the subtitle • When monitor is not included language a disc supporting the default is changed, the closed In this case, turn the subtitle the • and • cursor buttons settings on the disc, the disc's default several caption several timeSr the disc does not include that language (see page 37) is set when seconds is played, language may be required the subtitle the power is turned on and when the disc is is set for the new language and the closed caption to appear may overlap each other on the TV off Downloaded From Disc-Player.com Denon Manuals 31 l:l_[_ll!._ :I • With DVDs containing multiple angle signals, the angle can be switched during playback --1 FG-®_ 1 During playback, • The current press the ANGLE angle number Use the • and T cursor buttons 2 desired button is displayed or the number buttons Remote control unit Remote control unit to select the angle • The display turns off when the ANGLE button is pressed NOTES: • The multiple angle function • At scenes where multiple only works Downloaded From Disc-Player.com Denon Manuals 32 with discs on which angles are recorded, multiple angles are recorded the angle can be switched I:I_[_ II _'I-"I [] • USING THE MENUS For DVDs containing multiple titles, the desired title can be selected and played from the top menu 3 Example: TO_ M_NU 1 During playback, press the TOP MENU TOP MENU button • The top menu appears Remote control unit Example: When "Orange" is selected Use the cursor or number 2 buttons • If you select the title number to select the desired using the number buttons, title skip step TOP MENU (_1) 3 below \. Remote control unit Press the ENTER button 3 • Playback starts • Playback also starts if the PLAY button is pressed Remotecor]troJ unit Downloaded From Disc-Player.com Denon Manuals 33 I _l_[e] II [_: I • Some DVDs includespecialmenus For example, DVDs calledDVD menus with complex contents may subtitle language menus These menus are called"DVD contain guide menus, and DVDs with multiplelanguages may contain audio and menus" Here we describe the general procedure forusing DVD menus 2 3_1 / 0_-- Example: DVD MENU 1 During playback, press the MENU button • The DVD menu appears 2. AUDIO Remote control unit 3. ANGLE x Example: "AUDIO" is selected 2 Use the cursor or number buttons • If you select below using the item to select the desired the number buttons, DVD MENU item skip step 3 I1. SUB TITLE 3. ANGLE Remote control unit L Press the ENTER button 3 • The selected • If more item is set menus appear, repeat steps 2 and 3 Remote Downloaded From Disc-Player.com Denon Manuals 34 COrltrOJ unit I:I_[,.'.]II[_]-"I [] CHANGING THE DEFAULT SETTINGS In the stop mode, press the SETUP button • The setup (default settings) screen appears I 1. DISC SETUP Use this to set the language If the set language to be used when is not offered playing the disc. L3_VI_EO_TU on that disc, the discs default language is set 2. OSD SETUP Use this to set the language messages 3. VIDEO 1 displayed for the default ST_ M_NU_i_ _A_E ] DENON L 1,016C S setting I • 0TH_ _i I% _X_T screen and on the TV screen (" PLAY", etc) DISC SETUP SETUP Use this to set the DVD-2800's screen mode (TV aspect and TV type) 4. AUDIO SETUP Use this to set the DVD-2800's (Digital and LPCM output audio output mode settings) 5. RATINGS Use this to disable playback cannot watch Note that playback be disabled them of adult DVDs so that if the rating level is not recorded that it is possible 6. OTHER SETUP to disable playback These include special setdngs Use the • and • cursor buttons children Remote control unit of adult DVDs cannot on the DVD, but of all DVDs CAPTIONS and COMPRESSION to select the desired setting itemr then press the ENTER button Select "1 2 DISC SETUP" Select "20SD SETUP" (See page 36) (See page 38) Select "3 VIDEO SETUP" (See page 40) Select "4 AUDIO (See page42) Select "5 RATINGS" Select "6 OTHER SETUP" SETUP" (See page 44) Remote (See page 46) ¢ To exit the setup mode At the setup screen in step I on page 35, use the • and • cursor buttons is also possible to quit by pressing the SETUP button on the remote control to select "EXIT SETUP", control unit then press the ENTER button it unit Downloaded From Disc-Player.com Denon Manuals 35 I =l_[e]II 1_I:I IiV_v_ _'_JTill s][,,'][s.]L_"] =iltlj "._i 3, 4 2,:,: (3) dO (]0 Go G) Go COG) do qo_ 1 2 Read page 35 Use the • and • cursor buttons to select the desired setting then press the ENTER button 1. DIALOG Use this to set the language of the sound output [ [ 1,DIAL06 12 SL_BT_TLE from the speakers 2. SUBTITLE Use this 3 to set the language of the this to recorded set Remote the language on the disc (top menu To exit the disc setup of the menus DISCLANGIIAGE _DIALOG) buttons to select MAIN control unit then press the ENTER button RETURN previous button you can go back to the screen • The screen returns to as it was in step 1 Use the • and • cursor buttons setting unit etc) Remote Press control mode Use the • and • cursor PAGE", _ subtitles displayed on the TV 3. DISC MENUS Use DiSCG_IU_] DENON _N_LI_H I to select the desired then press the ENTER button (1_ When 1 DIALOG" ENGLISH (Factory f is selected: default) [ /]IALOG ] DENON Select this when you want to play the DVD with the sound in English FRENCH Select this when you want to play the DVD with the sound in French Remote control unit SPANISH 4 Select this when you want to play the DVD with DIALOG-->E_GLJSH L_E_ECT_T&_I_ the sound in Spanish GERMAN Select this when you want to play the DVD with the sound in German CHINESE Select this when you want to play the DVD with the sound in Chinese JAPANESE Select this when you want to play the DVD with the sound in Japanese Downloaded From Disc-Player.com Denon Manuals 36 Remote control unit j LOE¢ISIO_tENTIEIC_U_O_] I:I_[_ II _'I-"I To exit the dialog mode Use the • and • cursor SETUP", Press RETURN previous @ When buttons to select "DISC then press the ENTER button button, you can go back to the screen "2 SUBTITLE" ENGLISH (Factory is selected: default} Select this when you want to play the DVD with the subtitles FRENCH in English [ Select U]is when you want to play the DVD with the subtitles in French SUB ILE I DENON I 2, Sttll _ SPANISH I Select U]is when the subtitles GERMAN you want to play the DVD with Remote control unit in Spanish Select this when you want to play the DVD with the subtitles in German SUBTITLE--> FRENCH CHINESE Select this when you want to play the DVD with the subtitles in Chinese Remote control unit JAPANESE Select this when you want to play the DVD with the subtitles OFF Select this subtitles in Japanese if you do turn off the subtitle 4 not want (For some discs To exit the subtitle Press ® When the to mode buttons to select "DISC then press the ENTER button RETURN previous display display) Use the • and • cursor SETUP", to it is not possible button, you can go back to the screen "3 ENGLISH DISC MENUS" (Factory is selected: default} Select this when you want to display the menus [ in English FRENCH Select this when you want to display in French the menus Remote SPANISH Select this when you want to display 0_scME_US ]DENON control unit the menus in Spanish. GERMAN DISCMENUS-->_GLISfl Select this when you want to display in German the menus CHINESE Remote Select this when you want to display in Chinese control unit the menus JAPANESE Select this when you want to display the menus in Japanese To exit the disc menus mode Use the • and • cursor buttons SETUP", Press RETURN previous to select "DISC then press the ENTER button button, you can go back to the screen Downloaded From Disc-Player.com Denon Manuals 37 I_[_IG_:I 2,:,: ' 1 2 See page 35 Use the • and • cursor buttons setting to select the desired then press the ENTER button / 1. OSD LANGUAGE Use this setting to set language screen and messages screen (" PLAY, 2. WALL PAPER 3 the for the displayed I l LOSD LANGUAIII] l 2,WAtLPAPE_ ] default on the TV osoS_TU_ I DENON L EH_L)ISH ] etc) Use this to select the image to be shown on the Remote control unit screen in the stop mode and CD play mode OSDLANGUAGE To exit the osd setup mode Use the • and • cursor PAGE", Press buttons to select [S[LECT_ 'lr&-II_lP, MAIN j LgEC[SIII_;fIITERBUTTON I then press the ENTER button RETURN previous button you can go back to the Remote control unit screen • The screen returns to as it was in step 1 Use the • and • cursor buttons to select the desired setting then press the ENTER button (1_ When 10SD LANGUAGE is selected: ENGLISH (Factory Select this to set the OSD language OSDL_NGGAG] DENON [ default) [ I I)SII LJ_tIUAtlI_ ] to English FRAN(_AIS 4 Select this to set the OSD language ESPAI_IOL to French Select this to set the OSD language to Spanish USOLANGUAGE--> ENGLISH $ To exit the osd language mode Use the • and • cursor buttons to select SETUP, "OSD then press the ENTER button Press RETURN button previous screen Downloaded From Disc-Player.com Denon Manuals 38 LSELECT_TA'41_ you can go back to the j Lllecistoti:_Teellltil_ _ I:I_[_ II _'I-"I Use the • and • cursor buttons to select the desired setting, then press the ENTER button _ When "2 WALL PAPER" is selected: BLUE (Factory [ VIAL _A_/I ]DENON default) Select this to display a blue background PICTURE 4 Select this to display a defocussed Choose this for CRT and Plasma TVs picture WALLPAPES--> i3LUE ¢ To exit the wall paper mode Use the • and • SETUP", Press RETURN previous cursor buttons to select "OSD then press the ENTER button button, you can go back to the screen Downloaded From Disc-Player.com Denon Manuals 3g I _I_['-III l_']:I GOdO_ 1 2 See page 35 Use the • and • cursor buttons to select the desired setting then press the ENTER button 1. TV ASPECT F Use this to set the shape of your TV's screen 2. TV TYPE Use this to set your TV's video format or MULTI) 3. VIDEO OUT 3 Use this to select either output image output or interlace the PAGE", Press image Remote control previous button \ you can go back to the control unit to as it was in step 1 Use the • and • cursor buttons to select the desired setting then press the ENTER button (1_ When 1 TV ASPECT is selected: DVDs in the pan & scar] mode of the the Discs for which sides mode (with black strips WIDE (16:9) Select this to play wide mode previous button screen Downloaded From Disc-Player.com Denon Manuals 4O g_P[_T 1 are control unit box at the top and bottom) TVASPECT--> WIDE(16:9}TV DVDs in the full-screen Remote to select VIDEO then press the ENTER button RETURN I LT Remote DVDs in the letter To exit the TV aspect mode Use the • and • cursor buttons Press [ cut off) box mode Select this to play wide SETUP, picture pan & scan is not specified played in the letter 4:3 LB 4 F default) Select this to play wide (with DENON MAIN Remote 4:3 PS (Factory IV ASPECT ] TV ASP£CT to select screen • The screen returns DENON TV ASPEC_ ] unit then press the ENTER button RETURN ] VDEO SUP I I (NTSC, PAL progressive To exit the video setup mode Use the • and • cursor buttons [ you can go back to the control unit I:I_[e] II _"]-"I @ When "2 TV TYPE" MULTI (Factory is selected: default) Sdect this when your TV is compatible the NTSC and PAL formats NTSC signals jacks when played, video are output discs and recorded when the video are output discs from recorded [ output in NTSC format PAL signals outputjacks format NTSC from F with both are I , ?V TY_ output format DENON 1 in PAL Remote If NTSC is selected, NTSC ] the are played Select this when your TV's video format /V IYP control unit is NTSC is fixed TV TYPE--> NTSC TV to iSEL_CT: '_A'_l_ I BE_ISIONE_TE_;St_TON] PAL Select this when your TV's video format If PAL is selected, output format 8 To exit the TV type mode Use the • and • cursor buttons 4 SETUP", Press _) When Remote CORtfOl LH'IJ[ to select "VIDEO then press the ENTER button RETURN previous is PAL is fixed to PAL button, you can go back to the screeR "3 VIDEO OUT" PROGRESSIVE is selected: (Factory Select this when using the DVD-2800 to a progressive INTERLACED type TV [ using the DVD-2800 Use the • and • cursor Press connected Remote control I unit buttons Vll_EOOUT-->PBOGEESSIVE to select "VIDEO ISJELECT:VA_i_ I D_C_SION_TERE_TON and progressive image output j then press the ENTER button RETURN previous DENON type TV 8 To exit the video out mode SETUP", VIDO OUT ] connected I 3_/ID_@ @UT Select this when to an interlace (NOTE) default) button, you can go back to the Remote screeR CORtfOl LH'IJ[ NOTE: • For the component possible to specify output only, it is possible progressive image output to switch between for the Video output interlace u_Tage output connectors or S-Video output It is not connector Downloaded From Disc-Player.com Denon Manuals 41 I_[_I_-_:I 3, 4 1 2 See page 35 Use the • and • cursor buttons to sdect the desired F setting, then press the ENTER button 1. DIGITAL OUT Use this format to select the digital 2. LPCM SELECT (96 kHz _ 3 Use this to set the digital playing DVDs recorded output's [ I signal • DI_ITALOU_ A_DOSUP IDENON L _I¢_AL I 48 kHz) audio output when Remote in linear PCM audio control urlit To exit the audio setup mode Use the • and • cursor buttons to select DIGITAL OUT "MAIN I s_f.l_ct_ PAGE", then press the ENTER button Press RETURN button, you can go back to the previous screen • The screen returns Remote to as it was in step 1 Use the • and • cursor buttons CORtfOl IUECiSIO_NtEe B_O_ LJrli[ to select the desired setting, then press the ENTER button (1_ When "1 DIGITAL OUT" is selected: NORMAL (Factory default) f Select this to listen to the signals output f_om the terminals (optical/coaxial) recorded PCM Select 4 in Dolby digital audio output digital audio output when playing DVDs I Digital or DTS this to listen to the signals output f_om the terminals (opticaffcoaxial) recorded in linear PCM digital audio output digital audio output when playing DVDs Remote corltrol urlit When "OFF" output Digital from the set's analog audio output signals are not output from the audio output is selected, SETUP", signals are digital Remote to select "AUDIO then press the ENTER button RETURN previous analog at this time To exit the digital out mode Use the • and • cursor buttons button, screen Downloaded From Disc-Player.com Denon Manuals 42 I > AU_)tOS_TgP I > _iA_ PA6 DIGITAL OUT-->Ni_RMAL OFF Press OI61A OU ] DENON you can go back to the CORtfOl LJrli[ I ] I:I_[_ II _'I-"I @ When "2 LPCM SELECT (96 kHz _- 48 kHz)" is selected: This setting is valid when "NORMAL" is selected for "1 DIGITAL OUT" OFF (Factory or "PCM" default) Only linear PCM audio signals recorded at 48 kHz/16 bits are output from the digital output terminals When playing DVDs containing 48 kHz/20 or 24 bit or 96 kHz linear PCM audio signals, output For 4 from the digital output DVDs on which measures are taken, are output recorded in the no copyright however, format nothing is [ LPCMSELECT I DENON terminals protection the audio signals in which they were Remote control unit ON (96 kHz --> 48 kHz) When playing bit or 96 signals DVDs containhqg kHz linear are converted and output PCM 48 kHz/20 or 24 audio into 48 kHz/16 flora the digital output (In consideration of copyrights, audio digital output signals, is under LPCM SELECT--> OFF the liSELECT: TA<I_ j IDEClSI_iE_r_0N ] bit signals terminals the actual PCM Remote CORtfO] LJrli[ 48 kHz/16 bits) To exit the LPCM select mode Use the • and • cursor buttons SETUP", Press "AUDIO then press the ENTER button RETURN previous to select button, you can go back to the screen Downloaded From Disc-Player.com Denon Manuals 43 I =l_[e]II [.']:I 2,3, 1 2 4 See page 35 Use the • and • cursor buttons to select the desired setting then press the ENTER button 1. RATING LEVEL Use this to restrict not want children playback to view of adult DVDs you do Note that even with [ adult DVDs, viewing cannot be restricted unless the restriction level is recorded on the disc 3 2. It is however DVDs possible PASSWORD CHANGE to disable playback _:SW_D _HA_GE of all Remote Use this to change _l _GsI DENON control unit the password The set's password is set to "0000" mATINGLEVEL by default I_E_LEC;T_ T&<_ To exit the rating setup Use the • and • cursor PAGE", Press \ mode buttons to select MAIN Remote then press the ENTER button RETURN previous button IOEOISIZ_:4ENTEeB_rIOM ] control unit you can go back to the screen • The screen returns to as it was in step 1 Use the • and • cursor buttons to select the desired [ I, ATI G LIVe, I DENON setting then press the ENTER button (1) When 1 RATING LEVEL is selected: Level 0(LOCK ALL) Select this to disable playback Use this for example DVDs on which Level 1 of all DVDs to disable playback of adult the rating level is not recorded RATING LEVEL--> NO LIMIT Select this to play only DVDs for children 4 and general audience Level 2 to Level 8 Select this (Adult DVDs cannot be played) Remote to play DVDs for general and children Adult DVDs cannot NO LIMIT (Factory default) control unit \ f audiences be played I _AS_WO'_D I DENON Select this to play all DVDs Use the number buttons to input a 4 digit password then press the ENTER button The sets password is set to 0000 Do not forget the password The setting cannot be changed the correct Remote control unit by default without inputting PLEASEENTER_ASSWORD password [ OECESlO_:e_}rEe OOTr O_ %. Downloaded From Disc-Player.com Denon Manuals 44 ] I:I_[e] II [_']-"I I Remote control PAS_WO'_D I DENON unit PRESSE_TERTO CONTINUE L_CiS*O_:F_TE_XTO_ I Remote _} When Use "2 the password, PASSWORD number buttons to 4 is selected: input setting cannot be changed default _ASSWO_,D I DENON a 4-digit G) the password inputting the correct password The set's password is set Unit I [ I}LB [ fCE__'A_SWOI_D then press the ENTER button Do not forget S The CHANGE" CORtfOI Q without PLEASE F_TER OLD PASSWORD to "0OO0" by L_CIS_ON_F_TeemrrTo_ ] Remote controJ unit I _A_SWO_D I DENON bSl_Ft PA_$WOB_ PLEASE E_TER NEW_ASSWORD LoEC[SIO_:e_Tee eoxto_ ] Remote CORtfOI Unit I _SSWO_,D I DENON PLEASEXEENTElt PASSWO,_D Downloaded From Disc-Player.com Denon Manuals 45 l:l_[_lff._ :I 2,3, 4 1 2 See page 35 Use the • and • cursor buttons to select the desired setting, then press the ENTER button 1. CAPTIONS Use this to set whether closed captions 2. COMPRESSION 3 or not recorded [ 0 _lll sEIu_ I DENON I I, C_TI to display the on DVDs Use this to set the dynamic range output when Remote control unit playing discs CLOSEDCAPTION To exit the other setup mode Use the • and • cursor PAGE", Press buttons to select "MAIN \ then press the ENTER button RETURN previous button, you can go back to the Remote control unit screen • The screen returns to as it was in step 1 Use the • and • cursor buttons to select the desired setting, then press the ENTER button (1_ When "1 CAPTIONS" is selected: OFF (Factory default) Select this when captions on containing ON 4 the English screen playing when Press previous on the screen Remote control unit English captions CLOS_ CAPTIO_ --> LSI_LECT;YA_II_ to select "OTHER button, you can go back to the screen • The screen returns to as it was in step 1 Downloaded From Disc-Player.com Denon Manuals 46 DVDs \ then press the ENTER button RETURN D,IPONS ] DENON J L_0Tff L_ I_AIN the captions DVDs containing To exit the captions mode Use the • and • cursor buttons SETUP", playing captions Select this to display when [ L_._A??IONS you do not want to display the Remote control unit Off j ECISIOII:E!_ITIflI_III'I_ I I:I_[_ II _'I-"I _} When "2 COMPRESSION" OFF (Factory is selected: Select this for the standard ON Select this when 4 low to achieve the volume watching DVDs (This setting in Dolby [ is low range Li!!_ ilil]!__ __ _ ___i_iiiiiiiiiiiiiii! 1 powerful sound This setting late at night with even Remote is suited for the Press unit volume COMPSESSION--> OFF Digital ) LSELECT_ YA'_I_ Remote CORtfOl j ECISIO_:F_T_II_UTfD_I I urli[ then press the ENTER button RETURN previous control is only valid for DVDs recorded To exit the compression mode Use the • and T cursor buttons to select "OTHER SETUP", _0_21/SSION] DENON default) button, you can go back to the screen • The screen returns to as it was in step 1 NOTES: • An English caption decoder is required to display English captions • DVDs with caption signals are indicated by the D , _ , _ , mark English captions cannot be displayed when playing DVDs which do not contain caption signals • The characters in which the captions are displayed (capital letters, small letters, italics, etc) depend on the DVD and cannot be selected with the DVD-2800 Downloaded From Disc-Player.com Denon Manuals 47 l:l_[_ll!._ :I [] TROUBLESHOOTING • Are all the connections • Are you following • Are the amplifier if the DVD-2800 be damaged sales office correct ? the instructions and speakers does not seem in the manual operating to be functioning [urn off the poweh ? properly ? properly, unplug the power below if this does not solve cord from the power outletr check the table and contact your store of purchase Symptom Power button does not start when PLAY is pressed Playback stops immediately Picture does not appear Sound is not produced or sound quality Espoor Menu playback the DVD-2800 or nearest Check does not turn on Playback the problem, of video CD's is not • Plug the power cord securely • Is there • Discs other • Disc is dirty • Check the connections • Set the TV's input to "video" • Check the connections • Properly • Check the "DIGITAL • Menu playback • Some disturbance is normal • Some operations are disabled • • Subtitles Subtitles condensation into the power Page outlet 9 on the disc or player ? (Let stand for 1 or 2 hours) than DVDs, video CDs and music Wipe may Denon CDs cannot be played 7 off the dirt 8 9 9 set the input of the TV, stereo, OUT" etc and "COMPRESSION" is not possible with anything settings but video 42, 47 CDs with playback control 18 possible Picture is disturbed during the search operation Buttons do not operate No subtitles Audio are displayed (or subtitle) language does not switch • does not switch Playback selected For some discs the title is for rating level has been forgotten Reset all the setting Preset. does not switch the audio (or subtitle) it is performed, language but can be switched for discs cannot 31 which • Check the "RATINGS SETUP" do not include be switched when multiple the operation to 30, 31 on the menu screens • The angle cannot be switched for DVDs which do not contain cases multiple angles are only recorded for specific scenes does not start when The password 19 are not displayed for DVDs not containing subtitles are turned off Turn the subtitles setting on • The audio (or subtitle) lallguage audio (or subtitle) languages switch Angle for some discs multiple angles In some setting 32 44 • While the player is in the stop mode, hold the player's SKIP (14141) button and the STILL/PAUSE button down simultaneously and then hold the OPEN/CLOSE button down for longer than 3 seconds (until "INITIALIZE" disappears from the TV monitor) to Factory The lock will be released default values The disc is not played with the audio or subtitle language set as the default and all default • The disc does not play with the selected language is not included on that DVD settings and picture audio or subtitle settings language will return to the if that audio or subtitle 36, 37 setting Picture is not displayed Menu screen language messages in 4:3 (or 16:9) • Set the "TV ASPECT" for the desired • Check the default • Check that the batteries control unit does not operate • • • Downloaded From Disc-Player.com Denon Manuals 48 setting setting to the proper for the disc language's setting for the connected menu language "O" and "O" TV 40 37 do not display • The batteries Remote default are dead are inserted Replace them in the proper with directions new batteries Point the remote control unit at the remote control sensor when operati_g it Operate the remote control unit within a distance of 7 meters from the remote control sensor Remove the obstacle between the remote control unit and remote control sensor 15 15 15 15 15 I:I_[_ II g'1-"I [] MAIN SPECIFICATIONS Signal system: NTSC/PAL Applicable (1) DVD-Video discs: l-layer discs 12 cm single-sided diSCSr 24ayer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer per side) l-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs (1 layer per side) (2) Compact discs (CD-DA, Video CD) 12 cm discs, 8 cm discs S-Video output: Y output level: 1 Vp-p (75 !,;!/ohms) C output Output connectors: S connectors, 1 set Video output: Output (75 _2/ohms) Output connector: Component Y output output: level: 1 Vpp level: 0648 Output connector: Fixed output Audio output properties: Vp-p Pin-plug jacks, 1 set level: 1 Vp-p (75 !,2/ohms) PdC£ output Audio output: level: 0286 Vp-p (75 O/ohms) Pin jack, PFdCR output level: 0648 Vp-p (75 _/ohms) 1 set level: 2 Vrms, 1 set (1) Frequency response (1} DVDs (linear PCM) : 2 Hz to 22 kHz (48 kHz sampling) : 2 Hz to 44 kHz (96 kHz sampling) (2} CDs (2) : 2 Hz to 20 kHz S/N ratio (1} DVDs : 115dB (2} CDs (3) : 115dB Total harmonic (1} DVDs : 00018 % (2} CDs : 00018 % (4) Dynamic Digital audio output: range (1} DVDs : 108 dB (2} CDs : 100dB Optical digital output : Optical : Pin jack, Power supply: Coaxial digital output AC 120 V, 60 Hz Power consumption: 22 W Maximum external dimensions: Remote control unit: Infrared Power supply: DC 3 V, 2 "AAA" intellectual incorporates property must be authorized authorized 1 set 1 set RC-546 Type: This product connector, 434 (width) x 132 (height) x 339 (depth) mm (including protruding parts) 65 kg Mass: • distortion copyright rights owned by Macrovision by Macrovision * Design pulse (R03) batteries protection by Macrovision Corporation, Corporation and specifications technology that Corporation and is intended Reverse engineering is protected by method and other rights owners for home and other or disassembly are subject to change without notice claims of certain Use of this copyright limited viewing US patents protection and other technology uses only unless otherwise is prohibited in the course of product improvement Downloaded From Disc-Player.com Denon Manuals 49