Download Samsung VP-D102 Service manual

BDP-S300/S301
RMT-B101A/B101P
SERVICE MANUAL
US Model
Canadian Model
Ver. 1.1 2007.07
BDP-S300/S301
AEP Model
UK Model
E Model
Russian Model
Australian Model
Singapore Model
Thai Model
BDP-S300
Photo: BDP-S300
SPECIFICATIONS
System
Laser: Semiconductor laser
Outputs
(Jack name: Jack type/Output level/
Load impedance)
AUDIO OUT L/R:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/−18 dBm (wave
length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
5.1CH OUTPUT:
Phono jack/2 Vrms/10 kilohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT(Y, /PB/CB,
PR/CR):
Phono jack/Y: 1.0 Vp-p/PB/CB, PR/CR:
progressive or interlace
= 0.7 Vp-p/75 ohms
TM
VIDEO: Phono jack/1.0 Vp-p/75 ohms
S VIDEO: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.286 Vp-p/75ohms
(US, CND)
1.0 Vp-p, C: 0.3 Vp-p (PAL)/Y: 1.0
Vp-p, C: 0.286 Vp-p (NTSC)/75ohms
(SP)
1.0 Vp-p, C: 0.3 Vp-p (PAL)/75ohms
(Except US, CND, SP)
General
Power requirements:
120 V AC, 60 Hz (US, CND)
110–240 V AC, 50/60 Hz (E32)
220–240 V AC, 50/60 Hz
(Except US, CND, E32)
Power consumption: 33 W
Dimensions (approx.):
430 × 79 × 375 mm (17 × 3 1/8 ×
14 7/8 in.) (width/height/depth) incl.
projecting parts
Mass (approx.): 4.5 kg (10 lb)
Operating temperature:
5 °C to 35 °C (41°F to 95°F)
Operating humidity:
25 % to 80 %
Supplied accessories
• Video cord (phono plug × 1) (1)
• Stereo audio cord (phono plug × 2) (1)
• HDMI cord (1)
(supplied with BDP-S301 only)
• Power cord (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• Plug Adaptor (1) (E32)
• GNU License Information (1)
(Except US, CND)
Specifications and design are subject to
change without notice.
•
Abbreviation
CND : Canadian model
E32 : Latin American model
SP : Singaporean model
BLU-RAY DISC PLAYER
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
LEAKAGE TEST
The AC leakage from any exposed metal part to earth
ground and from all exposed metal parts to any exposed metal
part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of
three methods.
1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them
out to the customer and recommend their replacement.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers' instructions to use these
instruments.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and recommend their replacement.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication is 0.75V, so analog meters must have an accurate lowvoltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery
operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)
5. Check the line cord for cracks and abrasion. Recommend the
replacement of any such line cord to the customer.
6. Check the B+ voltage to see it is at the values specified.
7. Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
To Exposed Metal
Parts on Set
0.15 µF
1.5 kΩ
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
AC
voltmeter
(0.75 V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
This label is located on the laser
protective housing inside the enclosure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF
MORE THAN 25 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
This appliance is classified as a
CLASS1 LASER product. The
CLASS1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the enclosure.
Unleaded solder
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur
such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL
OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
–2–
TABLE OF CONTENTS
Section
Title
Page
Section
SERVICE NOTE
1.
5.
DISC REMOVAL PROCEDURE IF THE TRAY
CANNOT BE EJECTED (FORCED EJECTION) ..........
INSTALLATION METHOD OF EARTH SPRING
(FRONT) ........................................................................
INSTALLATION METHOD OF REAR GASKET ............
INSTALLATION METHOD OF NON-HALOGENE
TAPE ..............................................................................
TEST DISC ....................................................................
1.
GENERAL
2.
3.
4.
This Player Can Play the Following Discs and Files ....
Main Features ................................................................
Getting Started ..............................................................
Basic Operations ...........................................................
Watching Movie Files ....................................................
Listening to Music Files .................................................
Viewing Photo Files .......................................................
Changing the Initial Settings .........................................
Additional Information ...................................................
2.
3.
BLOCK DIAGRAMS
3-1.
3-2.
3-3.
3-4.
3-5.
3-6.
3-7.
Main Diagram ................................................................
Audio Block Diagram .....................................................
FL/FR Block Diagram ....................................................
Power 1 Block Diagram .................................................
Power 2 Block Diagram .................................................
Power 3 Block Diagram .................................................
Power 4 Block Diagram .................................................
Page
4.
SCHEMATIC DIAGRAMS AND PRINTED WIRING
BOARDS
4-1.
4-2.
Frame Schematic Diagram ............................................
Printed Wiring Boards and Schematic Diagrams .........
AU-258 (ANALOG AUDIO) Schematic Diagram ...........
AU-258 Printed Wiring Board ........................................
FL-176 Printed Wiring Board ........................................
FL-176 (FL/LED) Schematic Diagram ..........................
FR-271 Printed Wiring Board ........................................
FR-271 (SW/IR, INPUT/LED) Schematic Diagram ......
5.
TROUBLESHOOTING
4
4
4
5
5
1-1
1-1
1-2
1-4
1-7
1-8
1-9
1-10
1-13
Main Set, Power Supply Section ...................................
Operation&Display Section ...........................................
Audio Section ................................................................
FL Section .....................................................................
6.
2-1
2-1
2-1
2-2
2-2
2-3
2-3
2-4
2-4
2-5
2-5
2-5
2-6
2-6
2-7
2-7
3-1
3-3
3-5
3-7
3-9
3-11
3-13
–3–
4-1
4-5
4-5
4-7
4-11
4-13
4-15
4-17
5-1
5-9
5-13
5-14
REPAIR PARTS LIST
6-1. Exploded Views .............................................................
6-1-1. Case Assy ................................................................
6-1-2. Main Chassis Block ..................................................
6-1-3. Main Block ................................................................
6-2. Electrical Parts List .......................................................
DISASSEMBLY AND REASSEMBLY
2-1. DISASSEMBLY ..............................................................
2-1-1. Disassembly Flow .........................................................
2-1-2. Upper Case ...................................................................
2-1-3. Tray Cover Assy ............................................................
2-1-4. BD Drive (Service Use) .................................................
2-1-5. MAIN Board ...................................................................
2-1-6. AU-258 Board ................................................................
2-1-7. Power Block ...................................................................
2-1-8. Circuit Boards Location .................................................
2-2. REASSEMBLY ...............................................................
2-2-1. Upper Case ...................................................................
2-2-2. Tray Cover Assy ............................................................
2-2-3. BD Drive (Service Use) .................................................
2-2-4. MAIN Board ...................................................................
2-2-5. FL-176 Board/FR-271 Board ........................................
2-2-6. DC FAN ..........................................................................
Title
6-1
6-1
6-2
6-3
6-4
SERVICE NOTE
1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the upper case. (Refer to page 2-1)
2. Insert a clip in the hole of a drive and open a tray.
clip
tray
2. INSTALLATION METHOD OF EARTH SPRING (FRONT)
1. Please install earth spring (front) at an installation position of right and left in a front frame.
Please be careful to directions of installation.
2. Please fix by for each one place with a screw.
earth spring (front)
3. INSTALLATION METHOD OF REAR GASKET
1. Please remove a rear panel fixed screw and jack fixed screw (total 9 screws) and remove a rear panel.
2. Please stick a rear gasket inside the lower part of a rear panel. Refer to a lower picture. The location of the gasket is between the
optical terminal and the audio terminal.
3. Please install a rear panel in the chassis from the slanting bottom and install a removed screws.
rear gasket
–4–
4. INSTALLATION METHOD OF NON-HALOGENE TAPE
1. Please connect a drive power supply harness after an exchange of a drive and fix by a reuse clamp.
2. Please stick a non-halogene tape so that a power supply harness may be fixed on the drive back.
non-halogene tape
5. TEST DISC
Part No.
Description
Layer
J-6090-199-A
J-6090-200-A
3-702-101-01
J-6090-088-A
J-6090-089-A
J-6090-077-A
J-6090-078-A
BLX-104
BLX-204
CD (YEDS-18)
HLX-504
HLX-505
HLX-506
HLX-507
Single Layer
Dual Layer
Single Layer (NTSC)
Dual Layer (NTSC)
Single Layer (PAL)
Dual Layer (PAL)
5-1. Operation and Display
Check Items
1) BLX-104
1. Select 23.976Hz 1080p
2. Play “4.Motion pictures”
3. Check whether player can play back or not
4. Check each outputs
Video:
Composite/S Video/ component/HDMI
Audio:
Digital out(Coaxial/Optical)/Audio out/5.1Ch output
* When 1080/24p monitor is nothing, 1080i(59.94Hz or 50Hz) can use instead of 1080/24p.
However this is temporary correspondence.
2) BLX-204
1. Select 1080i(59.94Hz or 50Hz)
2. Play “4.Motion pictures”
3. Check whether player can play back or not
(Check the picture and sound output)
3) CD (YEDS-18)
Check whether player can play back or not
(Check the sound output)
4) HLX-504/505(NTSC) HLX506/507(PAL)
1. After displayed Main Menu, select “1.Video”
2. Play “1.Color Bar 100%”
(Check the picture and sound output)
3. Return to Menu
4. Play “Demonstration 4:3” or “5.Demonstration 16:9”
(Check the picture and sound output)
–5–
5-1-1. BLX-104 Menu Function (1)
Main Menu
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.
5-1-2. BLX-104 Menu Function (2)
Main Menu
To Main Menu after playback of T62_C1
To Main Menu after playback of T61_C1
To Main Menu after playback from T54_C1 to T60_C1
Sub_menu3 is displayed
To Main Menu after playback of T21_C1
To Main Menu after playback of T20_C1
To Main Menu after playback from T2_C1 to T19_C1
Sub_menu1 is displayed
* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively
displayed.
* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.
* 5. AV Sync does not operate.
Note:
Txx_ Cxx
Chapter No.
Title No.
–6–
5-1-3. BLX-104 Menu Function (3)
Main Menu
To Main Menu after playback of T52_C1
To Main Menu after playback of T51_C1
To Main Menu after playback from T44_C1 to T50_C1
Sub_menu2 is displayed
To Main Menu after playback of T42_C1
To Main Menu after playback of T41_C1
To Main Menu after playback from T23_C1 to T40_C1
Sub_menu4 is displayed
* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively
displayed.
* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively
displayed.
* 5. AV Sync does not operate.
–7–
5-1-4. BLX-104 Menu Function (4)
Sub menu1
X
X
X
X
X
X
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is
selectively displayed on Sub menu1 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is
selectively displayed on Sub menu1 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
59.94Hz/1080i is selectively displayed.
6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. ColorBar 100% is selectively displayed on Sub
menu1 screen.
9) At the selection of Main Manu, 1. VideoSignal of 1080/59.94i of Main Menu is selectively displayed.
10) AV Sync does not operate.
–8–
5-1-5. BLX-104 Menu Function (5)
Sub menu2
X
X
X
X
X
X
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
23.976Hz/1080P is selectively displayed.
6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu2 screen.
9) At the selection of Main Manu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.
10) AV Sync does not operate.
–9–
5-1-6. BLX-104 Menu Function (6)
Sub menu3
X
X
X
X
X
X
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/
1080i is selectively displayed.
6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1. 1. Color Bar 100% is selectively displayed on Sub
menu3 screen.
9) At the selection of Main Manu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.
10) AV Sync does not operate.
– 10 –
5-1-7. BLX-104 Menu Function (7)
Sub menu4
X
X
X
X
X
X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
59.94Hz/720P is selectively displayed.
6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu4 screen.
9) At the selection of Main Manu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.
10) AV Sync does not operate.
– 11 –
5-2-1. BLX-204 Menu Function (1)
Main Menu
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.
2-2-2. BLX-204 Menu Function (2)
Main Menu
To Main Menu after playback of T83_C1
To Main Menu after playback of T62tT82
To Main Menu after playback of T61_C1
To Main Menu after playback of T54_C1-T60_C1tT83_C1-T94_C1
Sub_menu3 is displayed
To Main Menu after playback of T67_C1
To Main Menu after playback of T21tT63tT64tT65tT66
To Main Menu after playback of T20_C1
To Main Menu after playback from T2_C1 to T19_C1
Sub_menu1 is displayed
* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively
displayed.
* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.
Note:
Txx_ Cxx
Chapter No.
Title No.
– 12 –
5-2-3. BLX-204 Menu Function (3)
Main Menu
To Main Menu after playback of T70_C1
To Main Menu after playback of T52_C1tT69
To Main Menu after playback of T51_C1
To Main Menu after playback of T44_C1-T50_C1tT71_C1-T81_C1
Sub_menu2 is displayed
To Main Menu after playback of T68_C1
To Main Menu after playback of T42_C1
To Main Menu after playback of T41_C1
To Main Menu after playback from T23_C1 to T40_C1
Sub_menu4 is displayed
* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively
displayed.
* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively
displayed.
– 13 –
5-2-4. BLX-204 Menu Function (4)
Sub menu 1
X
X
X
X
X
X
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is
selectively displayed on Sub menu1 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is
selectively displayed on Sub menu1 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
59.94Hz/1080i is selectively displayed.
6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. Color Bar 100% is selectively displayed on Sub
menu1 screen.
9) Selection of AV Sync t Return to Sub menu1 after playback of T67_C1. 1. Color Bar 100% is selectively displayed on Sub menu1
screen.
10) At the selection of Main Manu, 1. Video Signal of 1080/59.94i of Main Menu is selectively displayed.
– 14 –
5-2-5. BLX-204 Menu Function (5)
Sub menu 2
X
X
X
X
X
X
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
23.976Hz/1080P is selectively displayed.
6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1 and from T71_C1 to T81_C1. SubPic that corresponds to Audio
stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1 and T69. 1. Color Bar 100% is selectively displayed
on Sub menu2 screen.
9) Selection of AV Sync t Return to Sub menu2 after playback of T70_C1. 1. Color Bar 100% is selectively displayed on Sub menu2
screen.
10) At the selection of Main Manu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.
– 15 –
5-2-6. BLX-204 Menu Function (6)
Sub menu 3
X
X
X
X
X
X
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/
1080i is selectively displayed.
6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1 and from T84_C1 to T94_C1. SubPic that corresponds to Audio
stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1tT82. 1. Color Bar 100% is selectively displayed on
Sub menu3 screen.
9) Selection of AV Sync t Return to Sub menu3 after playback of T83_C1. 1. Color Bar 100% is selectively displayed on Sub menu3
screen.
10) At the selection of Main Manu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.
– 16 –
5-2-7. BLX-204 Menu Function (7)
Sub menu 4
X
X
X
X
X
X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed.
2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.
3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.
4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
59.94Hz/720P is selectively displayed.
6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.
During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu4 screen.
9) Selection of AV Sync t Return to Sub menu4 after playback of T68_C1. 1. Color Bar 100% is selectively displayed on Sub menu4
screen.
10) At the selection of Main Manu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.
– 17 –
MEMO
– 18 –
BDP-S300/S301
SECTION 1
GENERAL
About this manual
Instructions in this manual describe the controls on the remote.
You can also use the controls on the player if they have the same
or similar names as those on the remote.
The meanings of the icons used in this manual are described
below:
Icon
Examples of discs that the player
cannot play
This Player Can Play the
Following Discs and Files
The player cannot play the following discs:
• BD-REs/BD-Rs.
• BDs with cartridge.
• DVD-RWs/DVD-Rs of VR mode.
• DVD-RAMs.
• HD DVDs.
• DVD Audio discs.
• DATA CDs (CD-Rs/CD-RWs other than music CD format).
• CD-ROMs recorded in PHOTO CD format.
• Data part of CD-Extras.
• VCDs/Super VCDs.
• HD layer on Super Audio CDs.
Disc Format
Meaning
Functions available for BD-ROMs
including DL discs.
Blu-ray Disc
DVD
Functions available for DVD VIDEOs and
DVD+RWs/DVD+Rs in +VR mode or
DVD-RWs/DVD-Rs in video mode,
including 8 cm discs.
DVD VIDEO
DATA DVD
Functions available for DATA DVDs
(DVD+RWs/DVD+Rs/DVD-RWs/DVDRs containing MPEG-2 PS movie files,
MP3* audio tracks, and JPEG image files).
CD
Functions available for music CDs or CDRs/CD-RWs in music CD Format.
BD
* MP3 (MPEG-1 Audio Layer III) is a standard format defined by ISO
(International Organization for Standardization)/IEC (International
Electrotechnical Commission) MPEG which compresses audio data.
Note
The on-screen display illustrations used in this manual may not match
the graphics displayed on your TV screen.
This section is extracted from instruction manual (3-196-787-11).
DVD-RW/-R
Also, the player cannot play the following discs:
• A BD-ROM/DVD VIDEO with a different region code.
• A disc recorded in a color system other than NTSC, such as
PAL (this player conforms to the NTSC color system).
• A disc that has a non-standard shape (e.g., card, heart).
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane tape or a sticker still
left on it.
DVD+RW/+R
CD
Notes
“Blu-ray Disc” is a trademark.
“Blu-ray Disc,” “DVD+RW,” “DVD-RW,” “DVD+R,” “DVDR,” “DVD VIDEO,” and “CD” logos are trademarks.
• Notes about DVD+RWs/DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/
CD-RWs
Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/
CD-RWs cannot be played on this player due to the recording
quality or physical condition of the disc, or the characteristics
of the recording device and authoring software.
The DVD disc will not play if it has not been correctly
finalized. For more information, refer to the operating
instructions for the recording device. Note that some playback
functions may not work with some DVD+RWs/DVD+Rs, even
if they have been correctly finalized. In this case, view the disc
by normal playback.
Supported file formats (DATA DVD only)
DVD+RWs/DVD-RWs/DVD+Rs/DVD-Rs are called “DATA
DVD” in this manual when the discs contain playable files. The
following file formats are supported:
• MPEG-2 PS movie files.
• MP3 music files.
• JPEG* image files.
* JPEG format conforming to UDF (Universal Disk Format).
• Music discs encoded with copyright protection technologies
This product is designed to playback discs that conform to the
Compact Disc (CD) standard. Recently, various music discs
encoded with copyright protection technologies are being
marketed by some record companies. Please be aware that
among those discs, there are some that do not conform to the
CD standard and may not be playable by this product.
Notes about BD-ROM compatibility
This player supports BD-ROM Profile 1 only. Playback of later
versions and BDs other than BD-ROM is not guaranteed. Since
the Blu-ray Disc specifications are new and evolving, some discs
may not play depending on the disc type and the version.
The audio output differs depending on the source, connected
output jack, and selected audio settings. For details, see page 48.
• Note on DualDiscs
A DualDisc is a two sided disc product which mates DVD
recorded material on one side with digital audio material on the
other side.
However, since the audio material side does not conform to the
Compact Disc (CD) standard, playback on this product is not
guaranteed.
• Note about double-layer DVDs
The playback pictures and sound may be momentarily
interrupted when the layers switch.
,continued
6
5
HDMI (High-Definition Multimedia Interface)
digital interface
Main Features
BD/DVD region code
When connected to an HDMI-equipped display device using a
single HDMI cord, the player can output both SD to HD video
and multi-channel audio signals, in digital form without
degradation.
The HDMI specification supports HDCP (High-bandwidth
Digital Content Protection), a copy protection technology that
incorporates coding technology for digital video signals.
Your player has a region code printed on the back of the unit and
only will play BD-ROM/DVD VIDEOs (playback only) labeled
with identical region codes. This system is used to protect
copyrights.
DVD VIDEOs labeled
will also play on this player.
ALL
Depending on the BD-ROM/DVD VIDEO, there may be no region
code indication, even though playing the BD-ROM/DVD VIDEO is
prohibited by area restrictions.
1
COMPONENT
VIDEO OUT
1
VIDEO
OUT
DIGITAL OUT
VIDEO
AC IN
PB
HDMI
OUT
PR
S VIDEO
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
5.1CH OUTPUT
AUDIO
OUT
Y
FRONT
L
L
R
R
REAR
CENTER
WOOFER
Note on playback operations of BDs/
DVDs
Some playback operations of BDs/DVDs may be intentionally
set by software producers. Since this player plays BDs/DVDs
according to the disc contents the software producers designed,
some playback features may not be available. Also, refer to the
instructions supplied with the BDs/DVDs.
Copyrights
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
Experience the high definition (HD) quality audio/video output
and the library function of this Blu-ray Disc Player.
Library function for recorded files (For JPEG
image, MP3 audio, MPEG-2 PS movie files
only)
BD-ROM playback
BD-ROM is a next generation optical disc format in the HD era.
Featuring massive storage capacity of 25 to 50 GB (five times
larger than a DVD) and a high-speed transfer rate of up to 54
Mbps, the format offers not only uncompromised HD quality
video*1*2, but also enables rich bonus content on a single disc
and HD quality audio up to 8ch, and interactive operability.
With DATA DVDs created on other DVD devices, three
separate movie/music/photo Title List-browsers allow for easy
sorting, searching and playback including a slideshow.
*1 A compatible HD display device is necessary to enjoy the same
quality.
*2 Some discs allow viewing only with an HDMI connection.
24p True Cinema
Movies shot with a film camera consist of 24 frames per second.
Since conventional televisions (both CRT and flat panels)
display frames either at 1/60 or 1/50 second intervals, the 24
frames do not appear at an even pace.
When connected to a TV with 24p capabilities, the player
displays each frame at 1/24 second intervals — the same interval
originally shot with the film camera, thus faithfully reproducing
the original cinema image.
HDMI Control (‘BRAVIA’ Theatre Sync)
‘BRAVIA’ Theatre Sync Function makes operations simple by
connecting Sony components that are compatible with the
HDMI Control function with an HDMI cord.
BD-J application
The BD-ROM format supports Java for interactive functions.
“BD-J” offers content providers almost unlimited functionality
when creating interactive BD-ROM titles*.
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S. and
other countries.
Esmertec and Jbed are trademarks or registered trademarks of
Esmertec AG.
© 2000-2007 Esmertec AG
* This player does not support downloadable BD-J content.
Support of uncompressed multi-channel Linear
PCM
In combination with a compatible AV amplifier, the player can
output up to 8ch Linear PCM surround sound*. With a noncompatible amplifier, the player can output 5.1ch analog signals
from its 5.1CH OUTPUT jack for high quality audio enjoyment.
* Note that the DIGITAL OUT (COAXIAL or OPTICAL) jack does not
output 8ch signals. You will need an HDMI cord and an HDMIcompatible device that support 8ch signals.
AVCHD format disc playback
The player supports AVCHD format files–high definition
recordings made on AVCHD-compatible camcorders. Your high
definition personal archive is readily playable in HD quality.
,continued
8
7
1-1
About playback of discs recorded in
AVCHD format
This player can play AVCHD format discs.
TM
What is the AVCHD format?
The AVCHD format is a high definition digital video camera
format used to record SD (standard definition) or HD (high
definition) signals of either the 1080i specification*1 or the 720p
specification*2 on DVDs, using efficient data compression
coding technology. The MPEG-4 AVC/H.264 format is adopted
to compress video data, and the Dolby Digital or Linear PCM
system is used to compress audio data. The MPEG-4 AVC/
H.264 format is capable of compressing images at higher
efficiency than that of the conventional image compressing
format. The MPEG-4 AVC/H.264 format enables a high
definition (HD) video signal shot on a digital video camera
recorder to be recorded on DVD discs, in the same way as it
would be for a standard definition (SD) television signal.
“AVCHD” and the AVCHD logo are trademarks of Matsushita Electric
Industrial Co., Ltd. and Sony Corporation.
*1 A high definition specification which utilizes 1080 effective scanning
lines and the interlace system.
*2 A high definition specification which utilizes 720 effective scanning
lines and the progressive system.
Notes
• Some AVCHD format discs may not play, depending on the recording
condition.
• The AVCHD format disc will not play if it has not been correctly
finalized.
Step 1: Unpacking
Getting Started
B Connecting to an S VIDEO input jack
Connect using an S VIDEO cord (not supplied). You will enjoy
high quality images.
Blu-ray Disc player
Check that you have the following items:
• Video cord (phono plug × 1) (1)
• Stereo audio cord (phono plug × 2) (1)
• HDMI cord (1)
(supplied with BDP-S301 only)
• Power cord (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to
be connected.
• You cannot connect this player to a TV that does not have
a video input jack.
• Be sure to disconnect the power cord of each component
before connecting.
• Do not apply too much pressure on the connecting cords.
Pushing against the cabinet wall, etc., may damage the
cord.
Connect this player to your TV monitor, projector or AV
amplifier (receiver) using a video cord. Select one of the patterns
A through D, according to the input jack on your TV monitor,
projector or AV amplifier (receiver).
In order to view 1080p progressive signals with a compatible
TV, projector, or monitor with an HDMI input jack, you must
select pattern D. You can use pattern C to view 480p/720p
progressive signals or 1080i interlace signals on a compatible
device with component video input jacks.
Getting Started
Follow steps 1 to 7 to hook up and adjust the
settings of the player.
For jack and button names, see “Index to
Parts and Controls” (page 58).
Step 2: Connecting the
Video Cords/HDMI Cord
COMPONENT
VIDEO OUT
VIDEO
OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
PB
HDMI
OUT
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
PR
FRONT
L
L
R
R
REAR
CENTER
S VIDEO
WOOFER
to S VIDEO
VIDEO
OUT
VIDEO
S VIDEO cord (not supplied)
INPUT
S VIDEO
S VIDEO
A Connecting to a video input jack
Connect the supplied video cord (yellow) to the yellow (video)
jack. You will enjoy standard quality images.
TV, projector, or AV
amplifier (receiver)
: Signal flow
Blu-ray Disc player
COMPONENT
VIDEO OUT
VIDEO
OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
PB
HDMI
OUT
PR
FRONT
L
L
R
R
S VIDEO
C Connecting to component video
input jacks (Y, PB, PR)
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
REAR
CENTER
WOOFER
to VIDEO OUT
VIDEO
OUT
VIDEO
(yellow)
(yellow)
S VIDEO
INPUT
VIDEO
Video cord (supplied)
Connect the component via the COMPONENT VIDEO OUT jacks
using a component video cord (not supplied) or three video cords
(not supplied) of the same kind and length. You will enjoy accurate
color reproduction and high quality images. You can also enjoy
higher quality pictures from 480p/720p progressive signals or 1080i
interlace signals, if your TV, projector or AV amplifier (receiver) is
compatible.
L
Blu-ray Disc player
AUDIO
R
COMPONENT
VIDEO OUT
VIDEO
OUT
DIGITAL OUT
PB
: Signal flow
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To
change the aspect ratio, see page 45.
HDMI
OUT
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
TV, projector, or AV
amplifier (receiver)
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
PR
FRONT
L
L
R
R
S VIDEO
COMPONENT
VIDEO OUT
REAR
CENTER
WOOFER
to COMPONENT
VIDEO OUT
(green)
(green)
COMPONENT
VIDEO IN
Y
Y
(blue)
(blue)
PB
PB
PR
(red)
(red)
PR
Note
Do not connect a VCR, etc., between your TV and the player. If you pass
the player signals via the VCR, you may not receive a clear image on the
TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
Component video
cord (not supplied)
TV, projector, or AV
amplifier (receiver)
: Signal flow
VCR
• Step 1: Unpacking . . . . . . . . . . . . . . . . . . . . . . .9
Blu-ray Disc player
• Step 2: Connecting the Video Cords/
HDMI Cord . . . . . . . . . . . . . . . . . . . . . . . . .10
TV
Connect
directly
• Step 3: Connecting the Audio Cords . . . . . . . .12
• Step 4: Connecting the Power Cord . . . . . . . . .16
• Step 5: Preparing the Remote . . . . . . . . . . . . .16
• Step 6: Easy Setup. . . . . . . . . . . . . . . . . . . . . .18
• Step 7: Additional Adjustments . . . . . . . . . . . .19
9
D Connecting to an HDMI input jack
Use an HDMI cord to enjoy high quality digital pictures and
sound through the HDMI OUT jack. You will enjoy higher
quality pictures from 480p/1080i, or 1080p (highest among the
player output), if your TV, projector or AV amplifier (receiver)
is compatible.
Blu-ray Disc player
COMPONENT
VIDEO OUT
VIDEO
OUT
DIGITAL OUT
PB
PR
FRONT
L
L
R
R
S VIDEO
HDMI
OUT
REAR
CENTER
WOOFER
to HDMI OUT
HDMI cord
(supplied with BDP-S301 only)
TV, projector, or AV
amplifier (receiver)
HDMI IN
This Blu-ray Disc player incorporates High-Definition
Multimedia Interface (HDMI™) technology. HDMI, the HDMI
logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
Notes on connecting to the HDMI OUT jack
Observe the following as improper handling may damage the
HDMI OUT jack and the connector.
• Carefully align the HDMI OUT jack on the back of the player
and the HDMI connector by checking their shapes. Make sure
the connector is not upside down or tilted.
About indicators for HDMI connection
Step 3: Connecting the
Audio Cords
After the player is turned on, the HD indicator on the front panel
lights up when outputting 720p/1080i/1080p video signals. The
HDMI indicator lights up when an HDMI device is connected.
Notes
• Consumers should note that not all high definition television sets are
fully compatible with this product and may cause artifacts to be
displayed in the picture. In the case of 480/720/1080 progressive scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are questions
regarding our TV set compatibility with this model 480p/720p/1080p
Blu-ray Disc player, please contact our customer service center.
• If the picture is not clear, natural, or to your satisfaction, change the
video output resolution by pressing VIDEO FORMAT (page 46).
• Be sure to use only an HDMI cord that bears the HDMI logo.
About the ‘BRAVIA’ Theatre Sync
features (for HDMI connections only)
Select the connection that best suits your system. Be sure to read
the instructions for the components you wish to connect.
Getting Started
HDMI
OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
10
Connection
Your setup
A
TV
B
Stereo amplifier (receiver) and
two speakers
By connecting Sony components that are compatible with the
HDMI Control function with an HDMI cord, operation is
simplified as below:
• One-Touch Play (page 21)
You can turn on the player and TV/AV receiver, set the TV/AV
receiver’s input to the player, and start playback with one touch
of the H button.
• System Power-Off
When you turn the TV off by using the POWER button on the
TV’s remote, the HDMI compatible components turn off
automatically.
Notes about the HDMI OUT jack
• When you connect the player to an AV amplifier (receiver)
using an HDMI cord, you will need to do one of the following:
– Connect the AV amplifier (receiver) to a TV with the HDMI
cord.
– Connect the player to the TV with a video cord other than an
HDMI cord (component video cord, S VIDEO cord, or video
cord).
• When connecting to the HDMI OUT jack, carefully align the
HDMI connector with the jack. Do not bend or apply pressure
to the HDMI cord.
• If you change the component connected to the HDMI OUT
jack, change “Audio (HDMI)” in “Audio Setup” to match the
new component (page 47). The player stores the HDMI related
settings for up to five components.
• The HDMI connection is compatible with 2ch Linear PCM
signals (48 to 192 kHz, 16/20/24 bit), and 6 to 8ch Linear PCM
signals (48 to 96 kHz, 16/20/24 bit), in addition to Dolby
Digital and DTS bit stream (5.1ch signals up to 96 kHz, 16/20/
24bit).
Note
If you connect a component that does not conform to the selected audio
signal, a loud noise (or no sound) will come out from the speakers, which
could damage your ears or speakers.
C
AV amplifier (receiver) having a
Dolby*1 Surround (Pro Logic)
decoder and 3 to 6 speakers
• Surround effects: Dolby Surround
(Pro Logic)
To prepare for the ‘BRAVIA’ Theatre Sync
features
D-1
AV amplifier (receiver) with
5.1ch input jacks and 6 speakers
• Surround effects: Dolby Digital
(5.1ch), DTS (5.1ch)
Set “HDMI Control” of “Options” setup to “On” (page 52).
Note
Depending on the connected component, the HDMI Control function
may not work. Refer to the operating instructions supplied with the
component.
D-2
AV amplifier (receiver) with a
digital input jack having a Dolby
Digital or DTS*2 decoder and 6
speakers
• Surround effects: Dolby Digital
(5.1ch), DTS (5.1ch)
MI
HDUT
O
MI
HDUT
O
D-3
• Be sure to disconnect the HDMI cord when moving the player.
AV amplifier (receiver) with an
HDMI input jack and 8 speakers
• Surround effects: 8ch Linear
PCM
*1
*2
• If you place the player on the cabinet with the HDMI cord
connected, do not apply too much pressure to the cabinet wall.
It may damage the HDMI OUT jack or the HDMI cord.
• When connecting or disconnecting, do not screw in or rotate
the HDMI connector.
11
12
1-2
Manufactured under license from Dolby laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered trademarks of
DTS, Inc.
Connecting to your TV
A
This connection will use your TV’s speakers for sound.
C Connecting to an AV amplifier
(receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
B Connecting to a stereo amplifier
(receiver) and 2 speakers
If your stereo amplifier (receiver) only has audio input jacks L
and R, use B-1 . If your amplifier (receiver) has a digital input
jack, use B-2 .
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
PB
PR
VIDEO
OUT
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
HDMI
OUT
Getting Started
Blu-ray Disc player
Blu-ray Disc player
COMPONENT
VIDEO OUT
VIDEO
OUT
AC IN
FRONT
REAR
CENTER
L
R
R
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
AC IN
PB
HDMI
OUT
S VIDEO
PR
WOOFER
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
L
FRONT
L
L
R
R
REAR
CENTER
S VIDEO
to AUDIO OUT L/R
(white)
AUDIO
OUT
B-2
L
WOOFER
B-1
DIGITAL OUT
If your AV amplifier (receiver) only has L and R audio input
jacks, use C-1 . If your amplifier (receiver) has a digital input
jack, use C-2 .
You can enjoy surround effects only when playing Dolby
Surround audio or multi-channel audio (Dolby Digital or DTS)
discs.
If your AV amplifier (receiver) has 5.1 channel inputs, use
D-1 .
Blu-ray Disc player
Blu-ray Disc player
COMPONENT
VIDEO OUT
COMPONENT
VIDEO OUT
VIDEO
OUT
DIGITAL OUT
PB
HDMI
OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
PR
FRONT
L
L
R
R
REAR
CENTER
C-2
PR
C-1
D-1
AUDIO
OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
FRONT
L
L
R
R
S VIDEO
WOOFER
DIGITAL OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
PB
HDMI
OUT
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
S VIDEO
L
VIDEO
OUT
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
AUDIO
OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
D-1 Connecting to an AV amplifier
(receiver) with 5.1ch input jacks and 6
speakers
REAR
CENTER
WOOFER
5.1CH OUTPUT
FRONT
L
REAR
CENTER
L
R
(red)
R
R
R
TV
WOOFER
INPUT
to AUDIO OUT
L/R
to DIGITAL OUT
(COAXIAL or OPTICAL)
Stereo audio cord
(supplied)
VIDEO
to DIGITAL OUT
(COAXIAL or OPTICAL)
to AUDIO OUT
L/R
to 5.1CH
OUTPUT
(white)
(white)
L
AUDIO
(white)
Optical digital cord
(not supplied)
(red)
R
(red)
Stereo audio
cord (supplied)
Coaxial digital cord
(not supplied)
: Signal flow
Optical digital cord
(not supplied)
or
(white)
(white)
Monaural
audio cord
(not supplied)
to audio input
to audio input
[Speakers]
AV Amplifier
(receiver) with a
decoder
Stereo amplifier (receiver)
Stereo audio
cord (one is
supplied)
(red)
to coaxial or optical
digital input
to audio input
[Speakers]
[Speakers]
Stereo audio
cord (supplied)
Coaxial digital cord
(not supplied)
(red)
to coaxial or optical
digital input
(red)
or
[Speakers]
AV amplifier
(receiver) with
5.1ch inputs
[Speakers]
Front (L)
Front (R)
Rear (L) Rear (R)
Rear (L)
Center
Front (R)
Center
Rear (R)
Front (L)
Front (R)
: Signal flow
Subwoofer
Subwoofer
Rear (mono)
Front (L)
: Signal flow
: Signal flow
z Hint
z Hint
For correct speaker location, see the operating instructions of the
connected components.
For correct speaker location, see the operating instructions of the
connected components.
Note
When connecting 6 speakers, you do not need the “Rear (mono)” speaker
above.
,continued
14
13
D-2 Connecting to an AV amplifier
(receiver) with a digital input jack and
6 speakers
If you want to use the Dolby Digital, or DTS decoder function
on your AV amplifier (receiver), connect to its digital jack using
D-2 . You can enjoy a more realistic audio presence.
D-3 Connecting to an AV amplifier
(receiver) with an HDMI input jack and
8 speakers
If your AV amplifier (receiver) accepts 8ch Linear PCM input
with an HDMI connection, you can enjoy the surround sound
using D-3 .
Blu-ray Disc player
COMPONENT
VIDEO OUT
DIGITAL OUT
PB
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
HDMI
OUT
FRONT
L
L
R
R
D-2
REAR
VIDEO
OUT
CENTER
HDMI
OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
PR
WOOFER
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
PB
PR
S VIDEO
FRONT
L
L
R
R
S VIDEO
REAR
CENTER
WOOFER
After all of the other connections are complete, connect the
supplied power cord to the AC IN terminal of the player. Then
plug the player and TV power cords into the AC outlet.
Getting Started
Blu-ray Disc player
COMPONENT
VIDEO OUT
VIDEO
OUT
AC IN
Step 4: Connecting the
Power Cord
Step 5: Preparing the
Remote
You can control the player using the supplied remote. Insert two
Size AA (R6) batteries by matching the 3 and # ends on the
batteries to the markings inside the battery compartment. When
using the remote, point it at the remote sensor on the player
(page 58).
AC IN
to AC IN
D-3
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
HDMI
OUT
HDMI
OUT
HDMI cord
(supplied with
BDP-S301 only)
or
or
to HDMI input
HDMI cord
(supplied with
BDP-S301 only)
to HDMI input
to coaxial or optical
digital input
AV amplifier
(receiver) having a
decoder
Center
Subwoofer
[Speakers]
[Speakers]
Rear (L)
Rear (R)
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly
when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or a lighting
apparatus. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of time, remove the
batteries to avoid possible damage from battery leakage and corrosion.
Coaxial digital cord
(not supplied)
Optical digital cord
(not supplied)
[Speakers]
to AC outlet
to HDMI OUT
to DIGITAL OUT
(COAXIAL
or OPTICAL)
to HDMI OUT
AV amplifier
(receiver) with 8ch
outputs
Rear1 (L)
Center
Subwoofer
Rear1 (R)
Front (R)
Rear2 (R)
Rear2 (L)
Front (L)
[Speakers]
Front (R)
Front (L)
: Signal flow
z Hint
z Hint
For correct speaker location, see the operating instructions of the
connected components.
For correct speaker location, see the operating instructions of the
connected components.
Note
Not all HDMI-compatible AV amplifiers (receivers) accept 8ch Linear
PCM signals. See also the operating instructions supplied with the
connected AV amplifier (receiver).
15
16
1-3
If you want to control your TV with the
supplied remote
You can control the volume, input source, and power switch of
your Sony TV with the supplied remote.
OPEN/
CLOSE
DISPLAY TV/VIDEO
DIMMER
While holding down TV [/1, press the number
buttons to select your TV manufacturer’s code
(see the table below).
2
4
5
7
8
TV/VIDEO
2
Release TV [/1.
3
◆Code numbers of controllable TVs
If more than one code number is listed, try entering them one at
a time until you find the one that works with your TV.
6
9
VIDEO
FORMAT
0
CLEAR
AUDIO
SUBTITLE
GREEN
ANGLE
BLUE YELLOW
SYSTEM
MENU
TOP
MENU
POP UP/
MENU
RETURN
PREV
SLOW/STEP
SCAN
Code number
Sony
01 (default)
Easy Setup
SCAN
PAUSE
STOP
PLAY MODE
Start
Cancel
Follow the steps below to make the minimum number of basic
adjustments for using the player. If you do not complete Easy
Setup, it will appear each time you turn on your player.
Make the settings below in the following order.
Please use the Initial Setup if you
want to make more detailed settings.
Use
Wait about 90 seconds before the player turns on and starts
Easy Setup. The start-up time will be much shorter once Easy
Setup is completed.
◆If the above display does not appear
Go to step 6. This display appears only when the player is turned
on for the first time.
f Select the video output format for the
Daewoo
22, 04
Emerson
14
GE
06
Hitachi
02, 04
JVC
09
1
2
3
LG/Gold star
03, 17, 04
4
5
6
MGA/Mitsubishi
13, 04
7
8
NEC
04, 12
CLEAR
0
connected TV, and press ENTER.
OPEN/
CLOSE
TV
"/1
DIMMER
DISPLAY TV/VIDEO
For details about the video output, see page 46.
◆ When using the HDMI OUT jack
Easy Setup
Output Video Format
9
VIDEO
FORMAT
CH
MUTING
MUTING
CH +/–
Panasonic
19
Philips
08, 21
AUDIO
RED
VOL +/–
Pioneer
16
RCA
10, 04
R.Shack
05
Samsung
04, 12, 20
Sanyo
11
Sharp
05, 18
Toshiba
07, 18
Zenith
15
By pressing
You can
TV [/1
Turn the TV on or off.
VOL +/–
Adjust the volume of the TV.
◆To return the remote to its default settings
TV/VIDEO
Switch the TV’s input source between the
TV and other input sources.
Select the channel up and down.
1
2
Remove the batteries from the remote.
CH +/–
MUTING
Mute the sound (for Sony TV only).
3
Wait for a few seconds.
to select then press ENTER.
Confirm SYSTEM MENU Exit
When turned on for the first time
NEXT
PLAY
VOL
Manufacturer
“Easy Setup.”
Before using, make some simple
settings for the BD player.
Getting Started
1
RED
1
e Select “Start,” and press ENTER to start
Step 6: Easy Setup
You can control the volume, input source, and power switch of nonSony TVs as well.
If your TV is listed in the table below, set the appropriate
manufacturer’s code.
TV
TV \/1
Number
buttons
To control other TVs with the remote
SUBTITLE
GREEN
Auto
480i
480p
720p
1080i
1080p
Source Direct
ANGLE
BLUE YELLOW
SYSTEM
MENU
TOP
MENU
Select [Auto] to automatically match the video output
format with the HDMI-connected TV.
Confirm SYSTEM MENU Exit
</M/m/,,
ENTER
RETURN
PREV
Select from “Auto,” “480i,” “480p,” “720p,”
“1080i,” “1080p,” or “Source Direct,” then go to
step 8. “TV Type” in step 7 will be set to “16:9”
(wide screen).
POP UP/
MENU
SLOW/STEP
NEXT
◆ When using the jacks other than the HDMI OUT
jack
a Turn on the TV.
b Press [/1 to turn on the player.
Easy Setup
The player turns on after a moment.
Re-insert the batteries while pressing down 1, 2,
and 3 of the number buttons.
Output Video Format
S-Video/Video only
480i
480p
720p
1080i
Don't Know
c Switch the input selector on your TV so that
the signal from the player appears on your
TV screen.
Note
Select [Auto] to automatically match the video output
format with the HDMI-connected TV.
If the display for OSD language selection does not
appear, select “Start” of “Easy Setup” in “Options”
Setup (page 52).
Depending on the connected unit, you may not be able to control your
TV using all or some of the buttons on the supplied remote.
Confirm SYSTEM MENU Exit
Select from “S-Video/Video only,” “480i,”
“480p,” “720p,” “1080i” or “Don’t Know.” If
you select “720p” or “1080i,” go to step 8. “TV
Type” in step 7 will be set to “16:9” (wide
screen).
d Select the OSD language you want to display,
and press ENTER.
Easy Setup
Language
English
Français
Select the on-screen display language. Audio, subtitle and BD/DVD menu
language options will be set to the same language as this.
Confirm SYSTEM MENU Exit
This will determine the Audio, Subtitle and BD/
DVD menu languages as well.
17
g Select the aspect ratio that matches your TV,
and press ENTER.
Easy Setup
18
Playing a Disc
Step 7: Additional
Adjustments
TV Type
16:9
4:3
Basic
Operations
The following settings and adjustments are necessary when your
connection applies.
Confirm SYSTEM MENU Exit
◆ If you have a wide screen TV or a 4:3 standard TV
with a wide screen mode
Select “16:9” (page 45).
◆ If you have a 4:3 standard TV
Select “4:3” (page 45).
h Select “Finish Setup,” and press ENTER.
◆When using the HDMI OUT jack
(Pattern D –page 11)
• Select the video output resolution for your TV by pressing
VIDEO FORMAT (page 46).
• Select the type of video output from the HDMI OUT jack in
“YCbCr/RGBPC (HDMI)” of “Video Setup” (page 45).
Most of the BD playback operations are
common to DVD. This section covers BD/
DVD/CD playback in general, together with
the basic operation of the player.
For browsing recorded files on DATA
DVDs*, a separate library function is
available. See also page 32 for movie, 36 for
music, 40 for photo files.
For operations using the remote, a complete
list is located on page 24.
For audio connection
Easy Setup
◆When using the DIGITAL OUT (OPTICAL or COAXIAL) jack
(Connection B-2 , C-2 , D-2 –page 13 to 15)
• Set “Dolby Digital” and “DTS” in “Audio Setup” (page 47)
according to your AV amplifier’s (receiver’s) decoder.
Setup is complete!
Enjoy using your BD player!
Finish Setup
Go Back
Use
◆When using the COMPONENT VIDEO OUT jacks
(Pattern C –page 10)
• Select the video output resolution for your TV by pressing
VIDEO FORMAT (page 46).
Getting Started
For video connection
Select the screen aspect ratio to match
your TV.
to select then press ENTER.
Confirm SYSTEM MENU Exit
z Hints
• If you want to reset these settings to their factory defaults, see
“Resetting the Player” (page 53).
• You can re-run “Easy Setup” from “Options” Setup (page 52).
BD
DVD
CD
Z
OPEN/
CLOSE
TV
\/1
DIMMER
Number buttons
DISPLAY TV/VIDEO
1
2
4
5
7
8
CLEAR
0
3
6
9
VIDEO
FORMAT
AUDIO
RED
SUBTITLE
GREEN
ANGLE
BLUE YELLOW
SYSTEM
MENU
TOP MENU
</M/m/,, ENTER
RETURN
* DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs containing
MPEG-2 PS movie, MP3 audio, or JPEG image files.
POP UP/MENU
POP UP/
MENU
RETURN
PREV
SLOW/STEP
SCAN
◆When using the HDMI OUT jack
(HDMI connection of D-2 , D-3 –page 15)
• Set “Dolby Digital” and “DTS” in “Audio Setup” (page 47)
according to your AV amplifier’s (receiver’s) decoder.
• Select the audio output method from the HDMI OUT jack in
“Audio (HDMI)” of “Audio Setup” (page 47).
Color buttons
TOP
MENU
SYSTEM MENU
PLAY
PAUSE
NEXT
SCAN
STOP
H
PLAY MODE
X
VOL
CH
x
MUTING
◆When using the AUDIO OUT (L/R) jacks
(Connection C-1 –page 14)
• Set “DTS Downmix” to “Lt/Rt” in “Audio Setup” (page 47).
◆When using the 5.1CH OUTPUT jacks
(Connection D-1 –page 14)
• Set “Audio Output Mode” to “5.1 Channel” in “Speakers”
Setup (page 51), and adjust the “Speaker Setup” setting for
your system.
a Press \/1.
The player turns on after a moment.
Notes
b Switch the input selector on your TV so that
• If you connect a component that does not conform to the selected audio
signal, a loud noise (or no sound) will come out from the speakers,
which could damage your ears or speakers.
• If you connect using the HDMI OUT jack or COMPONENT VIDEO
OUT jacks and the picture does not appear clearly, the connected
display device may not be compatible with the progressive signals. In
this case, connect the display device to the S VIDEO jack or the
VIDEO jack (pattern A or B – see page 10), re-run the “Easy Setup”
from the “Options” Setup (page 52), and select “S-Video/Video only”
in step 6 (page 18). Also, check the above items again to see if any
additional adjustment is required.
the signal from the player appears on your
TV screen.
c Press Z to open the disc tray.
d Place a disc on the disc tray with the playback
side facing down.
• Playing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . 20
• Guide to Displays . . . . . . . . . . . . . . . . . . . . . . 22
• Guide to the Remote. . . . . . . . . . . . . . . . . . . . 24
• Checking the Disc Information . . . . . . . . . . . . 26
• Clarifying Low Volume Sounds (Audio DRC) . 27
• Adjusting the Pictures . . . . . . . . . . . . . . . . . . 28
• Locking a Disc . . . . . . . . . . . . . . . . . . . . . . . . 29
20
19
1-4
Playback side facing down
e Press Z to close the disc tray.
Wait a short while until the disc type appears on the
front panel display.
f Press H to start playback.
For more information about the remote’s operations,
see page 24.
Details
X
Pauses playback, or restarts playback from the same
point.
x
Stops playback, or cancels the resume point when
pressed twice.
H
Starts or restarts playback from the previous stop
point.
g When you finish playing, press Z to open the
disc tray.
h Remove the disc, and press Z again to close
About One-Touch Play (for HDMI connections
only)
With one touch of the H button, the player and your TV/AV
receiver automatically turn on and the TV/AV receiver’s input is
switched to the player. Playback starts automatically. To use this
function, set “HDMI Control” of “Options” setup to “On”
(page 52).
The TV/AV receiver’s input will also switch to the player
automatically, in the following cases:
– You press H, SYSTEM MENU, TOP MENU, or POP UP/
MENU buttons on the remote.
– A disc with auto playback function is loaded.
Title List
Guide to Displays
To prevent damage to your display device (ghosting), a screen
saver image appears when the player is left unattended, has no
disc inserted, or no title/slideshow is displayed for 15 minutes.
To cancel, press any button on the remote or the player.
For DATA DVDs, this display leads further to the Title Lists of
content type. The three Title Lists appear similar and are
operable in a similar way.
Title List
BD
DVD
DATA DVD
CD
Movies
Photos
When ‘Select an item, and press ENTER’ appears in this manual,
press the </M/m/, keys on the remote to select the item then
the entry button in the middle. You can operate the player
likewise using displays.
Basic Operations
Buttons
About the screen saver function
Music
Access the BD-R/RE titles.
Select SYSTEM MENU Exit
System Menu
Select the Title List you want to view; from “Movies,” “Photos,”
or “Music,” and press ENTER.
Title List
◆Movies
Displays movies/video titles only (page 32).
A/V Control
Setup
◆Photos
Displays image files only (page 40).
the disc tray.
Search for the part you want to play from a list of the disc's content.
Select SYSTEM MENU Exit
i Press \/1 to turn off the player.
a Press SYSTEM MENU to turn on the above
“System Menu.”
To use the BD’s or DVD’s menu
The player’s start menu appears, with entries to all of
the functions.
When you play a BD-ROM, DVD VIDEO, or a finalized
DVD+RW, DVD-RW (Video mode), DVD+R, or DVD-R
(Video mode), you can display the disc’s menu by pressing TOP
MENU or POP UP/MENU. Some BDs/DVDs display the menu
automatically. Either cases, navigate through the menu using
</M/m/,, ENTER, or the number buttons and the color
buttons as indicated by the disc’s on-screen instructions. The BD
menu is operable without interrupting playback.
◆Music
Displays music files only (page 36).
A/V Control (page 27)
Adjusts the audio/video settings. Select either “Video Control,”
or “Audio Control,” and press ENTER.
b Select an item, and press ENTER.
A/V Control
Each item leads to the following function displays.
See the pages in parentheses for operations. When
you want to return to the previous display, press
RETURN.
Video Control
Audio Control
To play restricted BDs
Set the playback picture quality.
If “CAN’T PLAY” appears on the front panel display for a BDROM, change the “BD Parental Control” setting (page 30).
Select SYSTEM MENU Exit
Setup (page 44)
To play restricted DVDs
Enters the Setup displays for changing the player’s settings.
Select the related Setup display, and press ENTER.
For a restricted DVD, the display asks for the password. For
“DVD Parental Control” setting, see page 30.
1
Enter your four-digit password using the number
buttons.
2
Press ENTER to confirm.
To register or change the password, see page 29.
Setup
Video Setup
Audio Setup
Language
Parental Control
Speakers
Options
Notes about Resume Play
• Playback starts from the beginning if the title has not been
played or the previous stop point is canceled.
• The stop point is canceled when:
– you change the settings on the player.
– you turn off the player (BD-ROM and CD only).
– you press x twice.
– you open the disc tray.
– you finish a search.
• The player remembers the stop point for one title/track/file
only. On a music CD, playback resumes from the beginning of
the track.
TV Type
4:3 Video Output
DVD Aspect Ratio
YCbCr/RGBPC(HDMI)
24p Output
16:9
Normal
Letter Box
Y, Cb, Cr
Off
Use
to select an item, then press [RR] or
ENTER.
Confirm SYSTEM MENU Exit
22
21
Entering characters
Guide to the Remote
A Z OPEN/CLOSE (page 20)
– Opens/closes the disc tray.
DATA DVD
TV &/1 (page 17)
– Turns the TV on or to standby mode.
When an on-screen keyboard appears (e.g., when searching for a
title), enter the characters as follows.
The following covers all of the remote’s functions. Refer to the
list when necessary.
s_
B
L
V
2
C
M
W
3
(
D
N
X
4
)
SHFT
E
O
Y
5
F
P
Z
6
G
Q
,
7
H
R
.
8
I
S
:
9
J
T
;
0
SPC DEL CLR
DONE
CANCEL
a Select the character you want to enter, and
press ENTER.
The character appears in the entry field. If necessary,
select the following items, and press ENTER.
Items
Details
SHFT
Switches between upper and lower case
characters. Select this before entering the
character.
SPC
Inserts a space.
DEL
Deletes the last character input.
CLR
Clears all input characters.
OPEN/
CLOSE
Basic Operations
A
K
U
1
_
B DIMMER (page 59)
– Changes the brightness of the front panel display
on the player (when completely darkened,
indicators on the front panel are also turned off
and the FL OFF indicator lights up).
TV
DISPLAY TV/VIDEO
DIMMER
1
2
4
5
6
7
8
9
CLEAR
0
3
AUDIO
SUBTITLE
GREEN
ANGLE
BLUE YELLOW
SYSTEM
MENU
DISPLAY (page 26)
– Displays the disc information on the screen.
TV/VIDEO (page 17)
– Switches between TV and other input sources.
VIDEO
FORMAT
RED
&/1 (page 18)
– Turns on, or sets the player to standby mode.
TOP
MENU
b Repeat step 1 to complete the entry.
C Number buttons (page 26)
– Enters the title/chapter numbers, etc.
CLEAR
– Clears the entry field.
D VIDEO FORMAT (page 45)
– Changes the video output resolution from the
HDMI OUT jack and the COMPONENT VIDEO
OUT jacks. Press this button repeatedly if no
picture appears.
E AUDIO*1 (page 49)
– Selects the sound track or the language track on a
BD/DVD.
c Select “DONE,” and press ENTER to close
the on-screen keyboard.
POP UP/
MENU
RETURN
Note
PREV
You cannot use the extended character set.
SLOW/STEP
SCAN
PLAY
PAUSE
NEXT
SCAN
STOP
PLAY MODE
VOL
CH
MUTING
Number 5, AUDIO, CH+, and H buttons have a tactile dot. Use the
tactile dot as a reference when operating the player.
23
24
1-5
*1 When playing MPEG-2 movie files or MP3 music files on a
DATA DVD, or a music CD, you cannot select the left or
right channel only.
SUBTITLE (page 49)
– Selects the subtitle language on a BD/DVD.
ANGLE
– Switches to other viewing angles when available.
F Color buttons (RED/GREEN/BLUE/YELLOW)
– Short cut keys for selecting items on some BD’s
menus (can also be used for BD’s Java interactive
operations).
G SYSTEM MENU (page 22)
– Enters/exits the player’s start menu (“System
Menu”).
I For TVs operable with the following buttons, see
page 17.
TOP MENU (page 20)
– Opens/closes the BD’s or DVD’s top menu.
Center button (ENTER) (page 20, 22)
– Enters the selected item.
H ./> PREV/NEXT
– Skips to the previous/next chapter, track, or file.
SLOW/STEP*2
c/ C
– Plays in slow motion or stop motion. To return to
normal play, press H.
• To play in slow motion
C during playback. When slow motion
Press
play starts, press
C repeatedly to change the
speed : 1/16 t 1/8 t 1/4 t 1/2 of normal playback
speed.
• To play in stop motion (step by step)
C
Press X during playback, then press c or
repeatedly.
2
m/M SCAN*
– Scans backwards or forward. The speed changes
when pressed repeatedly.
DATA DVD
DVD
DATA DVD
Number buttons
CD
a During playback, press PLAY MODE
repeatedly.
2
4
5
6
7
8
9
3
CLEAR
0
VIDEO
FORMAT
AUDIO
SUBTITLE
GREEN
a Press DISPLAY.
Example: When playing a DVD VIDEO.
Play
DVD-VIDEO
PREV
1-1 2.01.23
Chapters 12
Title Total
Repeat Title
2h15m34s
POP UP/
MENU
RETURN
SLOW/STEP
SCAN
PLAY
PAUSE
PLAY MODE
CD
TOP
MENU
ENTER
◆When playing a video or movie title
DATA DVD
You can check the title/chapter/track information including
video transmission rate etc., by pressing DISPLAY. The
information differs depending on the disc type and the player
status.
ANGLE
BLUE YELLOW
SYSTEM
MENU
Available items differ depending on the current title/
track/file or the disc type. To cancel the Play Mode,
press PLAY MODE again. For “Time Search,” see
“Searching using the remote” (page 26).
Items
DISPLAY TV/VIDEO
1
RED
DVD
TV
DIMMER
Playing in various play mode
BD
Checking the Disc
Information
BD
OPEN/
CLOSE
CH (channel) +/– (page 17)
– Selects the TV channels up and down.
NEXT
SCAN
STOP
PLAY MODE
VOL
Details
CH
MUTING
Repeat Chapter
(BD-ROM/DVD VIDEO
only)
Repeats the current chapter.
Repeat Title
Repeats the current title.
The following information appears:
1 Playback status
2 Disc type
◆When playing a music track
3 Title information
Items
Details
Repeat Track
Repeats the current track.
Repeat All
Repeats all the tracks on the disc or the
“Music” Title List.
*2 Depending on the disc or file type, the function may not work
or the scan speeds may differ.
Random
Plays all the tracks on the disc or the
“Music” Title List in a random order.
H PLAY
– Starts or re-starts playback.
◆When playing a photo image
PLAY MODE
– Switches to other play modes (Repeat Play, etc.)
when pressed during playback.
– Searches for a specific point (page 26).
DVD
You can search by entering the title/chapter number or the time
code (elapsed time from the beginning of the disc).
Basic Operations
</M/m/, (page 20, 22)
– Moves the highlight to select a displayed item.
BD
VOL (volume) +/– (page 17)
– Adjusts the TV volume.
POP UP/MENU (page 20)
– Opens/closes the BD’s pop up menu, or the
DVD’s disc menu.
RETURN (page 20, 22)
– Returns to the previous display.
Searching using the remote
MUTING (page 17)
– Mutes the TV sound.
To search for a title or chapter (BD-ROM, DVD
VIDEO only)
1
Items
Details
Repeat All
Repeats all the files on the disc or
“Photos” Title List.
Random
Plays all the files on the disc or “Photos”
Title List in a random order.
2
Enter the title number using the number buttons
while the player is in stop mode.
To search for a chapter, enter the chapter number
during playback. If you make a mistake, press
CLEAR once and re-enter.
• Currently playing title number/currently playing
chapter number.
• Total number of chapters within the title.
• Total playback time of the title.
4 Elapsed time of the current title
5 Play mode
b Press DISPLAY again.
Press ENTER to start playback.
Play
DVD-VIDEO
1-1 2.01.23
Chapter Time
Chapter Total
To search for a specific point
X PAUSE
– Pauses/re-starts playback.
x STOP
– Stops playback.
– Clears the resume point when pressed twice. The
resume point for a title is the last point you
played, the last track for an audio file, or the last
photo for a photo file.
1
During playback, press PLAY MODE repeatedly
until “Time Search” appears.
2
Enter the time code using the number buttons.
Enter the time in minutes and seconds (e.g., ‘12030’
for 1 hour, 20 minutes and 30 seconds). If you make
a mistake, press CLEAR once and re-enter.
3
Press ENTER to start playback.
Repeat Title
01.11.56
2h15m34s
10.03 Mbps
The display switches to show the following
information:
1 Chapter information
Note
Depending on the DVD VIDEO/BD-ROM/DATA DVD, these search
functions may not work.
• Elapsed time of the current chapter.
• Total playback time of the current chapter.
2 Video transmission rate and the stream
information
,continued
26
25
z Hints
• You can check disc information also on the front panel display
(page 59) or the Title List display (page 22).
• You can check the audio information by pressing AUDIO.
Adjusting the Pictures
Clarifying Low Volume
Sounds (Audio DRC)
Fine-tuning the picture to your
preference
Memory1
BD
DVD
BD
DATA DVD
DVD
White Adjust
DATA DVD
Black Adjust
Hue
Audio DRC
Off
Max
Basic Operations
Audio Control
Color Level
The “cinema tuned” picture preset setting will allow you to
maximize the visual impact of the BD or DVD you are watching
by optimizing the picture settings for different lighting
environments. “Memory” allows you to make your own detailed
adjustments.
Even at low volume, you can make low sounds such as dialogs
more audible.
Min
Max
Min
Max
Green
Red
Min
Max
Use [LL][RR] to set the behavior of film source
input. Press ENTER to preview.
a Select from “Memory 1” to “Memory 3” in
step 4 of “Adjusting the Pictures” (page 28).
b Select “Detailed Settings,” and press ENTER
to turn on the above display.
To switch to another “Memory,” press RETURN.
Adjusting sound accentual width (dynamic range).
This is effective when playback sound is Dolby Digital.
Standard
Convenient when you cannot turn up the volume (e.g., at
night)
Detailed Settings
b Select “A/V Control,” and press ENTER.
◆ To adjust while previewing the effect
Select a setting and press ENTER to switch the
display for the setting. Press </, to adjust
while checking the effect on the background
playback picture. Then press ENTER to save the
adjustment.
c Select “Video Control,” and press ENTER to
Underlined are the default settings for “Memory.”
a Press SYSTEM MENU during playback.
a Press SYSTEM MENU during playback.
b Select “A/V Control,” and press ENTER.
c Select “Audio Control,” and press ENTER to
turn on the above display.
turn on the above display.
d While “Audio DRC” is highlighted, select
from “Max” to “Off” by pressing </,.
d Press </, to select a setting.
e Press ENTER.
Items
Details
Brighter Room
For a room brighter than normal.
Theater Room
For a dark room such as a home
theater.
Standard (default)
Normally, select this.
Memory (1-3)
Select a setting when you want to
use the detailed picture adjustments
you previously made, or when you
want to make a new set. The player
remembers up to three sets (see
page 28).
Note
“Audio DRC” is effective only when the disc is a Dolby Digital Blu-ray
Disc or DVD, and:
– “Dolby Digital” in “Audio Setup” is set to “Downmix PCM” (page 47)
and the audio signals are output from the DIGITAL OUT (OPTICAL
or COAXIAL) jack or the HDMI OUT jack.
– “Audio (HDMI)” in “Audio Setup” is set to “PCM” (page 47) and the
audio signals are output from the HDMI OUT jack.
– the audio signals are output from the AUDIO OUT (L/R) jacks or the
5.1CH OUTPUT jacks.
e Press ENTER.
z Hint
The above description applies when the picture setting of your TV (if
any) is set to ‘Standard.’
Note
“Memory” settings do not affect the output from the S VIDEO OUT or
VIDEO OUT jacks.
28
27
1-6
c Select each of the picture elements, and
adjust using </,.
Items
Details
White Adjust
(Min~(mid)~Max)
Adjusts the brightness of white
colors.
Black Adjust
(Min~(mid)~Max)
Adjusts the richness of dark colors.
Hue
(Green~(mid)~Red)
Balances the green and the red
colors.
Color Level
(Min~(mid)~Max)
Adjusts the color saturation.
d Press RETURN.
Locking a Disc
Setting/changing the password
BD
DVD
Setting the Parental Control for DVD
VIDEOs
Setting the Parental Control for BDROMs
DVD
BD
Setup
BD
DVD
Video Setup
Audio Setup
Language
Parental Control
Speakers
Options
By setting the password and your limit in “Parental Control”
Setup, you can control playback of inappropriate discs.
Change Password
DVD Parental Control
BD Parental Control
Setup
Next Screen
Next Screen
Next Screen
Video Setup
Audio Setup
Language
Parental Control
Speakers
Options
Basic Operations
Use
to select an item, then press [RR] or
ENTER.
Confirm SYSTEM MENU Exit
Parental Control
BD PLAYER
Use the number keys to
enter the password to
turn off the parental
lock.
Current Level
Disc Level
a Press SYSTEM MENU.
3
5
The password is required when the DVD exceeds the
level you set.
Notes
• You cannot limit playback if the DVD VIDEO/BD-ROM does not
have the “Parental Control” function.
• If you forget the password, you will have to return all of the player
settings to their factory defaults (page 53).
• The above display does not appear for BD-ROM. If you cannot play a
BD-ROM because of Parental Control, reset “Change Age Restriction”
of “BD Parental Control” (page 50).
Setup
Change Level
Video Setup
Audio Setup
Language
Parental Control
Speakers
Options
Password
Level
Off
Use the number keys to enter the password, and press ENTER.
Change Age Restriction
Password
Age Restriction
255
Use the number keys to enter the password, and press ENTER.
Confirm SYSTEM MENU Exit
Confirm SYSTEM MENU Exit
a Press SYSTEM MENU.
a Press SYSTEM MENU.
b Select “Setup,” and press ENTER.
b Select “Setup,” and press ENTER.
c Select “Parental Control,” and press ENTER
to turn on the “Parental Control” Setup.
c Select “Parental Control,” and press ENTER
to turn on the “Parental Control” Setup.
d Select “Change Password (Set Password),”
and press ENTER.
d Select “DVD Parental Control,” and press
ENTER.
d Select “BD Parental Control,” and press
ENTER.
e Select “Next Screen,” and press ENTER to
turn on the password display.
e Select “Change Level,” and press ENTER to
turn on the above display.
e Select “Change Age Restriction,” and press
ENTER to turn on the above display.
b Select “Setup,” and press ENTER.
c Select “Parental Control,” and press ENTER
to turn on the above “Parental Control”
Setup.
◆ When you have not yet registered a password
Enter a four-digit password using the number
buttons, and press m. Re-enter it for
confirmation, and press ENTER.
This will set the playback limitation level.
f Enter the password using the number
buttons, and press ENTER.
◆ When you have already registered a password
Enter the four-digit password using the number
buttons, and press ENTER. Enter a new password
and press m, then re-enter it for confirmation, and
press ENTER.
g Press </, to select the limitation level
from “Off” to “Level 8,” and press ENTER.
Note that the lower the value, the stricter the
limitation.
z Hint
h When the display returns to the “Parental
Control” Setup, select “DVD Parental
Control,” and press ENTER.
To continue to set “DVD Parental Control,” go to step 4 of “Setting the
Parental Control for DVD VIDEOs” (page 30).
i Select “DVD Country Code,” and press
ENTER.
For BD-ROMs, the restriction is set by age, not by
level.
f Enter the password using the number
buttons, and press ENTER.
g Press </, to select the age from “0” to
“255,” and press ENTER.
h When the display returns to the “Parental
Control” Setup, select “BD Parental
Control,” and press ENTER.
i Select “BD Country Code,” and press
ENTER.
This ensures that you see the scenes intended for
your residential area.
This ensures that you see the scenes intended for
your residential area.
j On the “DVD Country Code” display, enter
the password using the number buttons, and
press ENTER.
k Press </, to select your country code (see
page 69), or press m and enter the code for
your area using the number buttons.
l Press ENTER.
j On the “BD Country Code” display, enter the
password using the number buttons, and
press ENTER.
k Press </, to select your country code (see
page 69), or press m and enter the code for
your area using the number buttons.
l Press ENTER.
z Hint
To continue to set “BD Parental Control,” go to step 4 of “Setting the
Parental Control for BD-ROMs” (page 30).
,continued
29
30
Viewing All Titles
Watching Movie
Files
DATA DVD
The “Movies” Title List first displays all titles on the disc.
All Movies
Basic Operations
Use the “Movies” Title List to browse
through and sort MPEG-2 PS movie files on
DATA DVDs.
All Movies
Browse
Search
Sort
1214 items
Spider
1:31
Smoother
1:02
Sideway
1:31
Home
1:25
Alpinist
1:33
Electricity
1:26
Lemon Grove
1:57
Bridget
1:36
Finding Never-Ever Land
1:18
Meet My Mom
1:18
List
Select SYSTEM MENU Exit
The Browse menu appears when you press <
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
c Select “Movies,” and press ENTER.
The above “All Movies” display appears, showing
all titles (scrollable by pressing m). From “All
Movies” you can apply items to all titles using the
Browse menu (see below).
To use the Browse menu
Press < after step 3 to display the items for the “Movies” Title
List. For operations, see the pages in parentheses. Available
items differ depending on the display.
Items
Details
All Movies
Lists all titles (as above).
Browse
Displays a list of genres, Quicklist, or
folders (page 34).
Search
Searches for a title using the on-screen
keyboard (page 34).
Sort
Reorders the titles by date or alphabet (see
below).
◆Example: To apply “Sort” to all titles
A Select “Sort,” and press ENTER.
B Select the setting you want to sort by; “Recent first,”
“Oldest first,” “By title (AtZ),” “By title (ZtA),” and
press ENTER.
• Viewing All Titles . . . . . . . . . . . . . . . . . . . . . . 32
• Browsing by Genre, Quicklist, or Folder . . . . . 34
• Searching for a Title . . . . . . . . . . . . . . . . . . . . 34
• Programming Playback (Quicklist) . . . . . . . . . 35
32
31
1-7
About the “Movies” (All Movies) Title List
display
Playing a title
a After step 3 of “Viewing All Titles” above,
select the title you want to play, and press
ENTER or H.
All Movies
The title starts playing. You can apply other playback
settings to the selected title using the “Options”
menu (see below).
Date : 2006
Genre : Adventure
Format : MPEG
1:31
Smoother
1:02
Sideway
1:31
Home
1:25
Alpinist
1:33
Electricity
1:26
Lemon Grove
1:57
Bridget
1:36
Finding Never-Ever Land
1:18
DATA DVD
DATA DVD
Narrow down the list of titles by selecting the category type (e.g.,
“Folders”), then the category.
You can find the exact title, or titles with a similar name.
1:18
1214 items
List
Options
Spider
Smoother
Select SYSTEM MENU Exit
1:31
1:02
Play from Beginning
1:31
Add to Quicklist
1:25
Sideway
Home
Alpinist
1:33
Electricity
1:26
Lemon Grove
Folders
1 Detailed information
Displays details about the selected title.
1:57
Bridget
1:36
Finding Never-Ever Land
Meet My Mom
1:18
• Date: Displays the recording year.
• Genre: Displays the genre name.
• Format: Displays the coding format.
1:18
List
Select SYSTEM MENU Exit
The “Options” menu appears when you select a title and
press ,
2 List area
Displays the title names of all content.
To use the “Options” menu
Watching Movie Files
Date : 2006
Genre : Adventure
Format : MPEG
Searching for a Title
1214 items
Spider
Meet My Mom
All Movies
Browsing by Genre,
Quicklist, or Folder
Search Results
2 items
5 items
Winter games 2006
Say No
1:31
Interviews
Sea
1:02
Sideway
1:31
Spider
1:25
Stay Alive
1:33
s_
A B C D E F GH I J
K L MNO P QR S T
U VWX Y Z , . : ;
1 2 3 4 5 6 7 8 9 0
_
( )
SHFT
b Select “Title List,” and press ENTER.
Items
Details
Play from Beginning
Starts playing the title you selected from
the beginning.
d Press < to turn on the Browse menu.
Add to Quicklist
Adds the selected title to the Quicklist.
c Select “Movies,” and press ENTER.
e Select “Browse,” and press ENTER.
◆Example: To apply “Play from Beginning” to the selected title
f Select the list you want to view from
A Select “Play from Beginning,” and press ENTER.
“Genres,” “Quicklist,” or “Folders,” and
press ENTER.
To play in other play mode
The list of genres/Quicklist/folders appears as above.
For details about the Quicklist, see “Programming
Playback (Quicklist)” (page 35).
During playback, press PLAY MODE repeatedly. The selected
item changes with each press: “Time Search” (page 26) —
“Repeat Title” — “Repeat Off”
See page 25 for details.
g Select the genre/Quicklist/folder you want to
CLR
CANCEL
Select SYSTEM MENU Exit
Search results are narrowed down as more characters
are entered
a Press SYSTEM MENU.
Press , instead of ENTER in the above step to display the
“Options” menu settings applicable to the title in the given
situation. In the above example, the following items are
available.
SPC DEL
DONE
Confirm SYSTEM MENU Exit
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
c Select “Movies,” and press ENTER.
d Press < to turn on the Browse menu.
e Select “Search,” and press ENTER to turn on
the above display.
f Enter the title name using the on-screen
keyboard (see page 23).
z Hint
You can select a title and start playback by pressing H or ENTER, or
using the “Options” menu (press ,).
view, and press ENTER.
z Hint
See page 24 for the remote’s operations.
z Hint
You can select a title and start playback by pressing H or ENTER, or
using the “Options” menu (press ,).
34
33
Programming Playback
(Quicklist)
To remove the title from the “Quicklist”
1
Select the title you want to remove from the
displayed “Quicklist,” and press ,.
2
Select “Remove,” and press ENTER.
Viewing All Artists
Listening to
Music Files
z Hint
You can play the “Quicklist” content in other play modes by pressing
PLAY MODE (page 25).
DATA DVD
Play your favorite titles in the order you like by making your
own “Quicklist.”
Quicklist
The “Quicklist” may be cleared after some operations (e.g., opening the
disc tray, or turning off the player etc.).
1:31
Smoother
1:02
Sideway
1:31
Home
1:25
Alpinist
1:33
Electricity
1:26
Lemon Grove
1:57
Bridget
1:36
Finding Never-Ever Land
1:18
Meet My Mom
1:18
List
Select SYSTEM MENU Exit
The “Quicklist” does not affect the original recording on
the disc
DATA DVD
The “Music” Title List first displays a list of the artist names on
the disc.
Use the “Music” Title List to browse
through and play the MP3 track files on
DATA DVDs. You can make a “Quicklist”
of your favorites and play in various play
modes.
14 items
Spider
Watching Movie Files
Date : 2006
Genre : Adventure
Format : MPEG
Note
Artists
7 items
All Artists
Angela Simpson
6 Albums
Blue Glass
5 Albums
Bohemian Beat
6 Albums
Cela
4 Albums
Classic Remix
5 Albums
Commotion
2 Albums
Count Dra"Q"la
Main Menu
2 Albums
Options
Play SYSTEM MENU Exit
The Browse menu appears when you press <
a Press SYSTEM MENU.
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
b Select “Title List,” and press ENTER.
c Select “Movies,” and press ENTER.
c Select “Music,” and press ENTER.
The above “Artists” display appears, showing all
artist names (scrollable by pressing m). From
“Artists” you can apply items to all tracks using the
Browse menu (see below).
d When the “All Movies” Title List appears,
select the title you want to add to the top of
the “Quicklist,” and press ,.
To use the Browse menu
e Select “Add to Quicklist” from the “Options”
Press < after step 3 to display the items for the “Music” Title
List. For operations, see the pages in parentheses. Available
items differ depending on the display.
menu, and press ENTER.
f Repeat step 4 and 5 to select all the desired
titles.
Items
Select in the order you want to play. You can add the
same title multiple times.
The “Quicklist” can contain up to 25 titles.
All Songs
Lists all tracks (page 37).
Browse
Details
Displays a list of artists, albums, genres,
Quicklist, or folders (page 38).
Search
g Press < to turn on the Browse menu.
Searches for a track using the on-screen
keyboard (page 38).
Sort
h Select “Browse,” and press ENTER.
Reorders the tracks by alphabet, or year,
etc. (see below).
Now Playing
Displays the track information and the
playback information during playback.
i Select “Quicklist,” and press ENTER to turn
◆Example: To apply “Sort” to all tracks
on the above display.
A To display the list of tracks, select “All Songs” from the
Browse menu and press ENTER.
The “Quicklist” Title List appears with the
programmed content.
B Press < to turn on the Browse menu.
j Select the title you want to start playback,
C Select “Sort,” and press ENTER.
• Viewing All Artists . . . . . . . . . . . . . . . . . . . . . 36
and press ENTER.
• Browsing by Artist, Album, Genre, Quicklist,
or Folder . . . . . . . . . . . . . . . . . . . . . . . . . . 38
• Searching for a Track . . . . . . . . . . . . . . . . . . . 38
• Programming Playback (Quicklist) . . . . . . . . . 39
35
36
1-8
D Select the setting you want to sort by; “Recent first,”
“Oldest first,” “By title (AtZ),” “By title (ZtA),” “By
artist (AtZ),” “By artist (ZtA),” and press ENTER.
About the “Music” (All Songs) Title List display
Playing a track
a After step 3 of “Viewing All Artists” above,
narrow down the list of tracks by selecting
the artist, then the album.
All Songs
Artist:Deep
Artist
: DeepGreen
Green
Album : Splash!
Album:Remixes
81-04
Genre:Alternative
Genre
: Alternative
Format:MP3
Format
: MP3
To list all tracks, press < and select “All Songs”
from the Browse menu.
b Select the track you want to play, and press
ENTER or H.
All Songs
Shout in Rio
Artist : Deep Green
Album : Splash!
Genre : Alternative
Format : MP3
Home
Rash (Spiritual Mix)
5:26
I Feel You (Remix)
4:57
Route 57 (Beatmasters Mix)
9:36
Free (DJ Remix)
6:18
Personal Note
6:18
Main Menu
Options
To use the “Options” menu
Press , instead of ENTER in the above step to display the
“Options” menu settings applicable to the track in the given
situation. In the above example, the following items are
available.
Items
Details
Play Song
Starts playing the track you selected from
the beginning.
Add to Quicklist
Adds the selected track to the Quicklist.
6:33
5:26
4:57
Route 57 (Beatmasters Mix)
9:36
Free (DJ Remix)
6:18
Personal Note
6:18
Options
Play SYSTEM MENU Exit
2 List area
Displays overall content.
• Main area: Displays the track names.
• Sub area: Displays the total playback time of each
track.
Play SYSTEM MENU Exit
The “Options” menu appears when you select a track
and press ,
3:55
Rash (Spiritual Mix)
I Feel You (Remix)
• Artist: Displays the artist name.
• Album: Displays the album name.
• Genre: Displays the genre name.
• Format: Displays the coding format.
9:31
6:33
7:31
Strangled
About unplayable audio track files
Searching for a Track
DATA DVD
DATA DVD
Narrow down the list of tracks by selecting the category type
(e.g., “Genres”), then the category.
You can find the exact track, or tracks with a similar name.
Genres
Play Song 8:00
7:31
Add to Quicklist
3:55
Strangled
8:00
Shout in Rio
Home
Search Results
20 items
All Genres
Alternative
2876 Songs
Blues
195 Songs
Books And Spoken
Listening to Music Files
Policies of Truth
9:31
Policies of Truth
1 Detailed information
Displays details about the selected track.
1214 items
Never Let Me Down (Split Mix)
Options
Never Let Me Down (Split Mix)
Main Menu
The title starts playing. You can apply other playback
settings to the selected track using the “Options”
menu (see below).
Browsing by Artist, Album,
Genre, Quicklist, or Folder
1214 items
16 Songs
Celtic
304 Songs
Classical
841 Songs
Comedy
R
A B C D E F GH I J
K L MNO P QR S T
U VWX Y Z , . : ;
1 2 3 4 5 6 7 8 9 0
_
( )
32 Songs
Country
2 Songs
Dance
460 Songs
Dark
60 Songs
SHFT
Main Menu
Options
DONE
Play SYSTEM MENU Exit
b Select “Title List,” and press ENTER.
The player does not play the file if:
– The DATA DVD is not recorded in an MP3 format that
conforms to UDF (Universal Disk Format).
– The audio track file does not have the extension “.MP3.”
– The data is not formatted properly even though it has the
extension “.MP3.”
– The data is not MPEG-1 Audio Layer III data.
– The data is recorded in mp3PRO format.
– The file name contains characters other than numbers and
English alphabet.
c Select “Music,” and press ENTER.
d Press < to turn on the Browse menu.
e Select “Browse,” and press ENTER.
f Select the list you want to view from
“Artists,” “Albums,” “Genres,” “Quicklist”
or “Folders,” and press ENTER.
The list of artists/albums/genres/Quicklist/folders
appears as above.
For details about the Quicklist, see “Programming
Playback (Quicklist)” (page 39).
◆Example: To apply “Play Song” to the selected track
A Select “Play Song,” and press ENTER.
To play in other play mode
folder you want to view, and press ENTER.
z Hint
You can select a track from the list of tracks, and start playback by
pressing ENTER or H, or using the “Options” menu (press ,).
z Hints
• See page 24 for the remote’s operations.
• Even after stopping playback, the player resumes playback from the
last track you played.
• Depending on the writing software used, the displayed track or album
names may be different from the characters you input.
8:00
7:31
Ree
7:32
Rise
6:33
Rose Bed
6:34
Rule the World
6:35
CLR
CANCEL
Select SYSTEM MENU Exit
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
c Select “Music,” and press ENTER.
d Press < to turn on the Browse menu.
e Select “All Songs,” and press ENTER.
f Press < to turn on the Browse menu.
g Select “Search,” and press ENTER to turn on
the above display.
h Enter the track name using the on-screen
keyboard (see page 23).
g Select the artist/album/genre/Quicklist/
During playback, press PLAY MODE repeatedly. The selected
item changes with each press: “Repeat Track” — “Repeat All”
— “Random” — “Repeat Off”
See page 25 for details.
9:31
Raging Plants
Ragamufin
Search results are narrowed down as more characters
are entered
Genres without content do not appear in the list
a Press SYSTEM MENU.
SPC DEL
7 items
Raga
z Hints
• You can select a track from the search result, and start playback by
pressing ENTER or H, or using the “Options” menu (press ,).
• You can search for a genre, artist, album, or folder name from each
Title List (e.g., “Genres”).
Notes
• Playback time of MP3 audio tracks may not be displayed correctly.
• If you put an extension “.MP3” to a non-MP3 file, the file may
accidentally play on the player. Note that such output may cause the
connected device to malfunction.
• Playback may not start immediately after skipping to another album.
• When using the Resume function on MP3 tracks, playback starts from
the beginning of the track.
37
Programming Playback
(Quicklist)
38
To remove the title from the “Quicklist”
1
Select the track you want to remove from the
displayed “Quicklist,” and press ,.
2
Select “Remove,” and press ENTER.
Viewing All Folders
Viewing Photo
Files
z Hint
You can play the “Quicklist” content in other play modes by pressing
PLAY MODE (page 25).
DATA DVD
Play your favorite tracks in the order you like by making your
own “Quicklist.”
Note
The “Quicklist” may be cleared after some operations (e.g., opening the
disc tray, or turning off the player etc.).
Quicklist
Never Let Me Down (Split Mix)
9:31
8:00
Shout in Rio
7:31
Options
Play SYSTEM MENU Exit
The “Quicklist” does not affect the original recording on
the disc
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
Listening to Music Files
Artist : Deep Green
Album : Splash!
Genre : Alternative
Format : MP3
Main Menu
Use the “Photos” Title List to view the
JPEG images on DATA DVDs. You can
reorder the files and start playing a
slideshow.
3 items
Policies of Truth
DATA DVD
The “Photos” Title List first displays all the folders on the disc.
Folders
2 items
Kurobe-dam 2005
Jungfraujoch 2006
Confirm SYSTEM MENU Exit
The Browse menu appears when you press < while on
the leftmost row
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
c Select “Photos,” and press ENTER.
c Select “Music,” and press ENTER.
The above “Folders” display appears, showing all
folders (scrollable by pressing m). From “Folders”
you can apply items to all files using the Browse
menu (see below).
d Press < to turn on the Browse menu.
e Select “All Songs,” and press ENTER.
To use the Browse menu
f When the “All Songs” Title List appears,
Press < after step 3 to display the items for “Photos” Title List.
For operations, see the pages in parentheses. Available items
differ depending on the display.
select the track you want to add to the top of
the “Quicklist,” and press ,.
g Select “Add to Quicklist” from the “Options”
Items
Details
All Photos
Displays all files in alphabetical order
(page 41).
menu, and press ENTER.
h Repeat step 6 and 7 to select all the desired
tracks.
Select in the order you want to play. You can add the
same track multiple times.
The “Quicklist” can contain up to 25 tracks.
Browse
Displays a list of dates, Quicklist, or
folders (page 42).
Search
Searches for a file using the on-screen
keyboard (page 42).
Sort
Reorders the files by date or alphabet (see
below).
◆Example: To apply “Sort” to all files
i Press < to turn on the Browse menu.
A To display the list of all files, select “All Photos” from the
Browse menu and press ENTER.
j Select “Browse,” and press ENTER.
B Move the highlight to the left most row, and press < to
turn on the Browse menu.
k Select “Quicklist,” and press ENTER to turn
C Select “Sort,” and press ENTER.
on the above display.
• Viewing All Folders . . . . . . . . . . . . . . . . . . . . . 40
The “Quicklist” Title List appears with the
programmed content.
• Browsing by Date, Quicklist, or Folder . . . . . . 42
• Searching for a Photo. . . . . . . . . . . . . . . . . . . 42
l Select the track you want to start playback,
• Programming a Slideshow Playback (Quicklist)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
and press ENTER.
40
39
1-9
D Select the setting you want to sort by; “Recent first,”
“Oldest first,” “By title (AtZ),” “By title (ZtA),” and
press ENTER.
About the “Photos” (All Photos) Title List
display
Playing a slideshow
a After step 3 of “Viewing All Folders” above,
press < and select “All Photos” from the
Browse menu.
All Photos
Browsing by Date,
Quicklist, or Folder
1214 items
File : DSC00434.jpg
File:Summer
of '06.jpg
Date:July/23/2006
Date
: 7/23/2006
Resolution:196x298
Resolution:
293 x 196
pixels
Format:JPEG
Format:
JPEG
b Select the file you want to start from, and
press ENTER to turn on the “Options”
menu.
Searching for a Photo
DATA DVD
DATA DVD
Narrow down the list of files by selecting the category type (e.g.,
“Date”), then the category.
You can find the exact file, or files with a similar name.
Confirm SYSTEM MENU Exit
c Select “Slideshow,” and press ENTER.
Year
Slideshow starts.
You can apply other playback settings to the selected
file using the “Options” menu (see below).
All Photos
Slideshow
Add to Quicklist
File : DSC00434.jpg
Date : 7/23/2006
Resolution: 293 x 196
Format: JPEG
2 List area
Displays overall photo content in thumbnail.
Confirm SYSTEM MENU Exit
To use the “Options” menu
Available “Options” menu settings differ depending on the
situation. In the above example of the use of the “Options”
menu, the following items are available.
Items
Details
Slideshow
Starts playing a slideshow as above.
Add to Quicklist
Adds the selected file to the Quicklist for
later slideshow playback.
To play in other play mode
During playback, press PLAY MODE repeatedly. The selected
item changes with each press:
“Repeat All” — “Random” — “Repeat Off”
See page 25 for details.
7 items
2006
About unplayable photo files
The player does not play the file if:
– The DATA DVD is not recorded in a JPEG format that
conforms to UDF (Universal Disk Format).
– The photo file is not recorded in a format that conforms to the
DCF*.
– The file has an extension other than “.JPEG.”
– The image is larger than 4,096 (width) × 4,096 (height) in
normal mode, or progressive JPEG.
– The image does not fit the screen (the image is reduced).
– The file name contains characters other than numbers and
English alphabet.
• Even when the above are not applicable, some files may not
play depending on the recording condition or the method (e.g.,
writer software).
• Files may not play on this player if edited on a PC.
2005
File:Summer of '06.jpg
Date:July/23/2006
Resolution:196x298 pixels
Format:JPEG
2004
2003
R_
2002
A B C D E F GH I J
K L MNO P QR S T
U VWX Y Z , . : ;
1 2 3 4 5 6 7 8 9 0
_
( )
2001
2000
1999
1998
Viewing Photo Files
• File: Displays the file name.
• Date: Displays the shooting date.
• Resolution: Displays the picture resolution in width ×
height.
• Format: Displays the recording format.
1214 items
Options
The “Options” menu appears when you select a file and
press ENTER
Search Results
10 items
2007
1 Detailed information
Displays details about the selected file.
SHFT
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
c Select “Photos,” and press ENTER.
d Press < to turn on the Browse menu.
e Select “Browse,” and press ENTER.
f Select the list you want to view from “Date,”
“Quicklist,” or “Folders” and press ENTER.
The list of date/Quicklist/folders appears as above.
For details about the Quicklist, see “Programming a
Slideshow Playback (Quicklist)” (page 43).
* “Design rule for Camera File system”: Image standards for digital
cameras regulated by JEITA (Japan Electronics and Information
Technology Industries Association).
g Select the date/Quicklist/folder you want to
view, and press ENTER.
You can select a file and start slideshow by using “Options” menu (press
,).
• See page 24 for the remote’s operations.
• Even after stopping playback, the player resumes playback from the
last file you played.
CLR
CANCEL
Select SYSTEM MENU Exit
Search results are narrowed down as more characters
are entered
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
c Select “Photos,” and press ENTER.
d Press < to turn on the Browse menu.
e Select “All Photos,” and press ENTER.
f Move the highlight to the leftmost row, and
press < to turn on the Browse menu.
g Select “Search,” and press ENTER to turn on
the above display.
h Enter the file name using the on-screen
keyboard (see page 23).
z Hint
z Hints
SPC DEL
DONE
Confirm SYSTEM MENU Exit
z Hint
You can select a file and start slideshow by using “Options” menu (press
,).
Note
The photos may appear slowly depending on the size and the number of
files.
42
41
Programming a Slideshow
Playback (Quicklist)
m Select “Slideshow” from the “Options”
Using the Setup Displays
menu, and press ENTER.
To remove from the “Quicklist”
DATA DVD
Play a slideshow in the order you like by making your own
“Quicklist.”
Quicklist
1
Select the file you want to remove from the
displayed “Quicklist,” and press ENTER.
2
Select “Remove,” and press ENTER.
Changing the
Initial Settings
z Hint
You can play the “Quicklist” content in other play modes by pressing
PLAY MODE (page 25).
Select “Setup” from the “System Menu”
when you need to change the settings of the
player (e.g., when changing the connected
device or the audio/video output, etc.).
The last part of this section explains how to
return all of these settings to their factory
defaults.
22 items
Note
The “Quicklist” may be cleared after some operations (e.g., opening the
disc tray, or turning off the player etc.).
File : DSC00434.jpg
Date : 7/23/2006
Resolution: 293 x 196
Format: JPEG
a Press SYSTEM MENU.
b Select “Title List,” and press ENTER.
Viewing Photo Files
Confirm SYSTEM MENU Exit
The “Quicklist” does not affect the original recording on
the disc
BD
DVD
CD
Setup
Video Setup
Audio Setup
Language
Parental Control
Speakers
Options
TV Type
4:3 Video Out
DVD Aspect Ratio
YCbCr/RGBPC(HDMI)
24p Output
16:9
Normal
Letter Box
Y, Cb, Cr
Off
Use
to select an item, then press [RR] or
ENTER.
Confirm SYSTEM MENU Exit
Note
Playback settings described in this section may not work
when there is any preset playback setting in the disc. The
disc’s playback settings take priority over the player’s
playback settings.
DATA DVD
From the “System Menu,” enter the “Setup” displays to change
the settings of the player.
a Press SYSTEM MENU while the player is
stopped.
b Select “Setup,” and press ENTER.
c Select the “Setup” display you want to use,
c Select “Photos,” and press ENTER.
from “Video Setup,” “Audio Setup,”
“Language,” “Parental Control,”
“Speakers,” or “Options,” and press
ENTER.
d Press < to turn on the Browse menu.
e Select “All Photos,” and press ENTER.
The “Setup” display appears with the related items.
Note that the display switches to the screen saver if
you do not operate for 15 minutes.
f When the “All Photos” Title List appears,
select the file you want to add to the top of the
“Quicklist,” and press ENTER.
d Select the item you want to change, and press
ENTER.
Refer to the explanations in the following sections.
g Select “Add to Quicklist” from the “Options”
menu, and press ENTER.
To return to the previous display
h Repeat step 6 and 7 to select all the desired
Press RETURN.
files.
Select in the order you want to play. You can add the
same file multiple times.
The “Quicklist” can contain up to 25 files.
i Move the highlight to the leftmost row, and
press < to turn on the Browse menu.
• Using the Setup Displays . . . . . . . . . . . . . . . . 44
• Video Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 45
j Select “Browse,” and press ENTER.
• Audio Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 47
k Select “Quicklist,” and press ENTER to turn
• Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
on the above display.
• Parental Control . . . . . . . . . . . . . . . . . . . . . . . 50
The “Quicklist” Title List appears with the
programmed content.
• Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
• Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
l Select the file you want to start playback, and
• Resetting the Player . . . . . . . . . . . . . . . . . . . . 53
press ENTER.
43
44
1-10
To set the video output resolution
Video Setup
Press VIDEO FORMAT repeatedly to select the desired resolution. Note that the resolution differs depending on the display device,
connecting jack and the source material as below.
Underlined items are the default settings.
TV Type
– Select your TV type.
4:3
– 4:3 screen TV.
16:9
– Wide-screen TV, or a TV with a wide mode function.
4:3 Video Out
– Select the display configuration for a 4:3
screen picture on a 16:9 wide screen TV.
Full
– Displays a 4:3 screen picture in 16:9 aspect ratio.
HDMI OUT
COMPONENT VIDEO OUT
VIDEO/S VIDEO
Automatically selects the
recommended resolution acceptable
for your TV.
480i
480i
480i
480i
480i
480p
480p
480i
720p
720p
BD:720p, DVD:480p*3
480i
1080i
1080i
BD:1080i, DVD:480p*3
480i
1080p
1080p
480i
480i
Source Direct
Output differs depending on source
material*1
Output differs depending on source
material*2
480i
* Outputs in the same resolution and frequency as recorded on the disc.
*2 1080/24p video signals are not output from the COMPONENT VIDEO OUT jacks.
*3 Outputs in the resolution of the original setting (720p or 1080i) when the DVD is not copy guarded.
Normal
– Displays a 4:3 screen picture in 4:3 aspect ratio with black bands on the sides. Select
this if your TV does not have a 4:3 screen mode.
Notes
• If the picture is not clear, natural or to your satisfaction, try another resolution that suits the disc and your TV/projector, etc. For the details, refer also
to the instruction manual supplied with the TV/projector, etc.
• 480i or 480p video signals may be output when you connect to the COMPONENT VIDEO OUT jacks and play some copy-guarded BDs/DVDs. To
enjoy the HD quality resolution in this case, connect the display device to the HDMI OUT jack using an HDMI cord.
• Even when you select a setting other than “Auto,” the player automatically adjusts the video signals if the TV cannot accept the set resolution.
Changing the Initial Settings
– Select the type of output from the HDMI
OUT jack.
480i
480p
1
DVD Aspect Ratio
Letter Box
– Select the display configuration for a 16:9 – Displays a wide picture with black bands on the top and
DVD picture on a 4:3 screen TV (selectable bottom.
when “TV Type” is set to “4:3”).
Note that the aspect ratio is fixed on some Pan & Scan
discs. For example, a 4:3 letterbox picture – Displays a full-height picture on the entire screen, with
trimmed sides.
may appear even when “Pan & Scan” is
selected.
YCbCr / RGBPC (HDMI)
Connecting
jack
Auto
Settings
Y, Cb, Cr
– Select this when connecting to an HDMI device.
RGB (16-235)
– Select this when connecting to a device with an HDCP-compliant DVI jack.
RGB (0-255)
– Select this when connecting to an RGB (0-255) device.
To output the 1080/24p video signals
A 1080/24p-compatible TV is required for this setting.
1
2
Set “24p Output” in “Video Setup” to “On” (page 45).
Press VIDEO FORMAT repeatedly to select “Auto” or “Source Direct.”
Note
If there is no picture, press VIDEO FORMAT repeatedly until the picture appears correctly.
24p Output
On
– For connection to a 1080/24p-compatible TV – Sends 1920 × 1080p/24 Hz video signals when playing Film-based materials on BDROMs (720p/24 Hz or 1080p/24 Hz). Select this when the connection applies.
using the HDMI OUT jack.
Off
– Select this for any other connection.
Note
“TV Type” and “DVD Aspect Ratio” can be set when video output resolution is 480i/480p.
,continued
46
45
About the audio output signals
Audio Setup
The audio output differs as follows, depending on the source, output jack, and the selected settings.
Jacks/
settings
Disc/source
BDLinear PCM 2ch
ROM
Underlined items are the default settings. Since many factors
affect the type of audio output, see also “About the audio output
signals” on page 48.
Dolby Digital
Dolby Digital
– Select the audio signals output when playing – Select this when connecting to a device with a built-in Dolby Digital decoder.
Dolby Digital discs. This setting affects the Downmix PCM
output from the DIGITAL OUT (COAXIAL – Converts to output Linear PCM signals. Select this when connecting to a device
or OPTICAL) jack.
without a built-in Dolby Digital decoder.
DIGITAL OUT (OPTICAL/
COAXIAL) jacks*2
HDMI OUT jack*3
2ch
5.1ch
PCM
Bitstream
PCM*4
2ch
2ch
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
2ch Downmix
LPCM
2ch Downmix
LPCM
2ch Downmix
LPCM
2ch Downmix
LPCM
5.1ch LPCM
5.1ch LPCM
5.1ch*5 2ch Downmix
5.1ch
7.1ch
DTS Downmix
– Select the type of 2-channel signals when
down-mixed from multi-channel DTS
sources (effective for audio connections
when “DTS” is set to “Downmix PCM”).
Audio (HDMI)
– Select the output method from the HDMI
OUT jack.
Stereo
– Downmixes multi-channel audio signals for two channel stereo.
Lt/Rt
– Allows you to hear surround sound when the connected device has a built-in Dolby
Pro Logic decoder.
Auto
– Normally, select this. Outputs audio signals according to the status of the connected
HDMI device.
PCM
– Converts all audio signals to Linear PCM.
DVD
CD
Auto*4
2ch Downmix
5.1ch
Downmix
7.1ch LPCM
7.1ch LPCM
Dolby Digital
2ch Downmix
5.1ch
2ch Downmix
LPCM
Dolby Digital
5.1ch LPCM
Dolby Digital
Dolby Digital Plus
2ch Downmix
5.1ch
2ch Downmix
LPCM
Dolby Digital
7.1ch LPCM*6 Dolby Digital
Dolby TrueHD
2ch Downmix
5.1ch
Dolby Digital
5.1ch LPCM
Dolby Digital
DTS
2ch Downmix
5.1ch
DTS
5.1ch LPCM
DTS
DTS-HD
2ch Downmix
5.1ch
DTS
5.1ch LPCM
DTS
Linear PCM
2ch
2ch
2ch LPCM
2ch LPCM
2ch LPCM
Dolby Digital
2ch Downmix
5.1ch
Dolby Digital
5.1ch LPCM
Dolby Digital
DTS
2ch Downmix
5.1ch
DTS
5.1ch LPCM
DTS
MPEG
2ch
2ch
2ch LPCM
—
2ch LPCM
2ch LPCM
Linear PCM 2ch
2ch
2ch
2ch LPCM
2ch LPCM
2ch LPCM
2ch LPCM
DTS
2ch Downmix
5.1ch
2ch Downmix
LPCM
DTS
5.1ch LPCM
DTS
DTS
Changing the Initial Settings
DTS
– Select the audio signals output when playing – Select this when connecting to a device with a built-in DTS decoder.
DTS discs. This setting affects the output
Downmix PCM
from the DIGITAL OUT (COAXIAL or
– Converts to output Linear PCM signals. Select this when connecting to a device
OPTICAL) jack.
without a built-in DTS decoder.
AUDIO OUT L/R jacks*1
2ch Downmix
LPCM
2ch Downmix
LPCM
2ch Downmix
LPCM
2ch LPCM
2ch Downmix
LPCM
2ch Downmix
LPCM
*1 “2 Channel” and “5.1 Channel” are selectable under “Audio Output Mode” in “Speakers” Setup (page 51).
*2 PCM : when “Dolby Digital” or “DTS” in “Audio Setup” is set to “Downmix PCM” (page 47).
Bitstream : when “Dolby Digital” or “DTS” in “Audio Setup” is set to “Dolby Digital” or “DTS” (page 47).
*3 Selectable under “Audio (HDMI)” in “Audio Setup” (page 47).
*4 Selectable under “Audio (HDMI)” in “Audio Setup” (page 47). Resulting output may differ depending on the connected HDMI device.
*5 When the sampling frequency is 192 kHz, the player downmixes to 2ch signals even if the disc or source is 5.1ch.
*6 Outputs 7.1ch LPCM signals decoded from Dolby Digital Plus audio stream.
,continued
48
47
1-11
Language
Parental Control
Underlined items are the default settings.
This function limits playback of DVD VIDEOs and BD-ROMs.
To activate, see “Locking a Disc” (page 29).
The default settings are underlined.
Notes
• When you select a language in “Audio,” “Subtitles,” “BD/DVD Menu”
that is not recorded on the disc, one of the recorded languages is
automatically selected.
• Playback settings stored in the disc take priority over these settings.
Notes
• You cannot limit playback if the disc does not have the Parental Control
function.
• If you forget the password for “Parental Control,” you will need to reset
the player (page 53). Note that all the settings you made also return to
their defaults.
OSD
English
– Select your language for the player on-screen – Displays the menus and messages in English.
displays.
Français
– Displays the menus and messages in French.
Audio
– Select the default soundtrack language for
BD-ROMs/DVD VIDEOs.
English
– Plays the soundtrack in English.
Other
– See “Language Code List” on page 68 and enter the code for your language.
Subtitles
English
– Select the default subtitle language for BD- – Displays the subtitles in English.
ROMs/DVD VIDEOs.
French
– Displays the subtitles in French.
Other
– See “Language Code List” on page 68 and enter the code for your language.
BD/DVD Menu
– Select the default menu language for BDROMs/DVD VIDEOs.
w/Subtitle
– Displays BD’s/DVD’s menus in the same language as the subtitle language.
Changing the Initial Settings
French
– Plays the soundtrack in French.
Change Password (Set Password)
Next Screen
– Set or change the password for the “Parental Control” function. You will be asked for
the password when playing restricted discs or when changing the control level.
DVD Parental Control
Change Level
– Set the control level. The display asks for the password if the disc’s pre-determined
level exceeds the limit you set. The default setting is “Off.”
DVD Country Code
– This ensures that you see the scenes intended for your residential area.
BD Parental Control
Change Age Restriction
– Set the control level. The display asks for the password if the disc’s pre-determined
age restriction is higher than the age you set. The default setting is “255.”
BD Country Code
– This ensures that you see the scenes intended for your residential area when playing
BD-ROMs.
English
– Displays BD’s/DVD’s menus in English.
French
– Displays BD’s/DVD’s menus in French.
Other
– See “Language Code List” on page 68 and enter the code for your language.
Subtitle Display
On
– Turns on the subtitles.
Off
– Turns off the subtitles.
49
50
Speakers
Options
The following items are necessary when using the 5.1CH
OUTPUT jacks.
The default settings are underlined.
Audio Output Mode
– For analog connection.
Speaker Setup
2 Channel
– Select this when connecting to an AV amplifier (receiver) using the AUDIO OUT (L/
R) jacks.
On Screen Display
On
– Select whether to display the playback status – Displays playback status.
on the screen (Stop, Play, etc.).
Off
– Playback status is not displayed.
5.1 Channel
– Select this when connecting to an AV amplifier (receiver) using the 5.1CH OUTPUT
jacks.
– Select whether to activate the “Auto Power
Off” function of the player.
Next Screen
1 Select the speaker setting that needs adjusting by pressing M/m.
• “C” (center speaker): “Yes” or “No”
• “Ls/Rs” (left surround speaker/right surround speaker): “Yes” or “No”
• “L/R” (left front speaker/right front speaker): “Large” or “Small”
2 Adjust the setting by pressing </,.
• For “C” and “Ls/Rs,” select whether the speakers are included in your system.
• For “L/R,” select the size. This setting is disabled if either of “C” or “Ls/Rs” is set
to “No.”
3 Press ENTER to save the adjustments.
Auto Power Off
Easy Setup
Changing the Initial Settings
– This setting affects the output from the
5.1CH OUTPUT jacks.
Underlined items are the default settings.
– Re-runs the Easy Setup to make the basic
settings.
On
– Turns off the player when the player is left in stop or pause mode without operation
for 30 minutes.
Off
– The player remains turned on with or without operation.
Start
– Press ENTER and see page 18.
HDMI Control
On
– Select whether to activate the HDMI Control – Activates the function.
Off
function of the player (page 11).
– Turns off the function.
Hybrid Disc Playback Layer
– Select the layer priority when playing a
Hybrid Disc. Remove the disc when you
change the setting.
51
52
1-12
BD
– Plays BD layer.
DVD
– Plays DVD layer.
CD
– Plays CD layer.
Troubleshooting
Resetting the Player
Additional
Information
You can return all of the player settings to their factory defaults.
@/1
x
HDMI
HD
If you experience any of the following difficulties while using
the player, use this troubleshooting guide to help remedy the
problem before requesting repairs. Should any problem persist,
consult your nearest Sony dealer (For customers in the USA
only).
FL OFF
Power
a When the power is on, hold down x on the
The power does not turn on.
, Check that the power cord is connected securely.
, It takes a short while before the player turns on.
front panel, and press @/1.
The player turns off, and all of the settings return to
their factory defaults.
Changing the Initial Settings
Picture
There is no picture/picture noise appears.
• Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 54
• Self-Diagnosis Function . . . . . . . . . . . . . . . . . 57
, Re-connect the connecting cord securely.
, The connecting cords are damaged.
, Check the connection to your TV (page 10) and switch the
input selector on your TV so that the signal from the player
appears on the TV screen.
, The disc is dirty or flawed.
, If the picture output from your player goes through your
VCR to get to your TV or if you are connected to a
combination TV/VIDEO player, the copy-protection signal
applied to some BD/DVD programs could affect picture
quality. If you still experience problems even when you
connect your player directly to your TV, try connecting your
player to your TV’s S VIDEO input (page 10).
, The player is connected to an input device that is not HDCPcompliant (the HDMI indicator on the front panel does not
light up). See page 11.
, If the HDMI OUT jack or the COMPONENT VIDEO OUT
jacks are used for video output, changing the output
resolution may solve the problem (page 46). Press VIDEO
FORMAT repeatedly until the picture appears correctly.
, Depending on the disc, the picture quality may be poor when
the VIDEO FORMAT setting is set to other than “480i,”
even when the player is connected to a progressive or HD
TV using a component cord or an HDMI cord. If this
happens, press VIDEO FORMAT repeatedly to switch to
“480i.”
, When playing a double-layer DVD, the video and audio may
be momentarily interrupted at the point where the layers
switch.
• Index to Parts and Controls . . . . . . . . . . . . . . 58
• GNU License Information . . . . . . . . . . . . . . . . 60
• Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
• Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 67
• Language Code List . . . . . . . . . . . . . . . . . . . . 68
• Parental Control Country/Area Code List . . . . 69
• Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
, The aspect ratio of the disc is fixed on your BD/DVD. See
page 45.
The dark area of the picture is too dark/the
bright area is too bright or unnatural.
, Set “Video Control” in “A/V Control” to “Standard”
(default) (page 28).
, Adjust each picture setting for “Memory” in “Video
Control” to midpoint (default) (page 28).
Sound
There is no sound.
The sound is not output correctly.
, Check the “Audio Output Mode” in “Speakers” Setup
(page 51) if the AUDIO OUT (L/R) jacks or the 5.1CH
OUTPUT jacks are used for audio connection.
, The disc is skewed.
, The player cannot play certain discs (page 6).
, The region code on the BD/DVD does not match the player.
, Moisture has condensed inside the player (page 3).
, The player cannot play a recorded disc that is not correctly
finalized (page 6).
, The movie file size exceeds 2 GB.
, The file on the DATA DVD contains characters other than
numbers and English alphabet.
Some functions such as Stop, Search, Slowmotion Play, Repeat Play, or Random Play
cannot be performed.
, Depending on the disc, you may not be able to do some of
the operations above. Refer to the operating manual that
comes with the disc.
The language for the soundtrack cannot be
changed.
The MP3 audio track file cannot be played
(page 36).
, Try using the BD’s or DVD’s menu instead of the direct
selection button on the remote (page 21).
, Multi-lingual tracks are not recorded on the BD/DVD being
played.
, The BD/DVD prohibits the changing of the language for the
sound track.
, The DATA DVD is not recorded in the MP3 format that
conforms to UDF (Universal Disk Format).
, The audio track file does not have the extension “.MP3.”
, The data is not formatted properly even though it has the
extension “.MP3.”
, The data is not MPEG-1 Audio Layer III data.
, The player cannot play audio tracks in mp3PRO format.
, Characters other than numbers and English alphabet are
contained in the file name.
The subtitle language cannot be changed or
turned off.
, Try using the BD’s or DVD’s menu instead of the direct
selection button on the remote (page 21).
, Multi-lingual subtitles are not recorded on the BD/DVD
being played.
, The BD/DVD prohibits the changing of subtitles.
The photo file cannot be played (page 40).
, The disc is dirty or flawed.
, The DATA DVD is not recorded in a JPEG format that
conforms to UDF (Universal Disk Format).
, The file has an extension other than “.JPEG” or “.JPG.”
, The image is larger than 4,096 (width) × 4,096 (height) in
normal mode. (Some progressive JPEG files cannot be
displayed even if the file size is within this specified
capacity.)
, The image does not fit the screen (the image is reduced).
, The photo file format does not conform to DCF* (page 41).
, Characters other than numbers and English alphabet are
contained in the file name.
Additional Information
, The disc is dirty or flawed.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input jack on the
amplifier (receiver) (page 12).
, The amplifier (receiver) input is not correctly set.
, The player is in pause mode or in Slow-motion Play mode.
, The player is in scan mode.
, If the audio signal does not come through the DIGITAL
OUT (OPTICAL or COAXIAL)/HDMI OUT jack, check
the audio settings (page 47).
, The equipment connected to the HDMI OUT jack does not
conform to the audio signal format, in this case set “Audio
(HDMI)” in “Audio Setup” to “PCM” (page 47).
The angles cannot be changed.
, Try using the BD’s or DVD’s menu instead of the direct
selection button on the remote (page 21).
, Multi-angles are not recorded on the BD/DVD being played.
, The BD/DVD prohibits changing of the angles.
The HDMI Control function does not work.
, If the HDMI indicator on the front panel does not light up,
check the HDMI connection (page 11, 15).
, Set “HDMI Control” to “On” (page 52).
, Make sure that the connected component is compatible with
the HDMI Control function. Refer to the operating
instructions of the component for details.
, Check that the power cord of the connected component is
connected securely.
, Check the connected component’s setting for the HDMI
Control function. Refer to the operating instructions of the
component.
, If you change the HDMI connection, connect and disconnect
the power cord, or if power failure occurs, set “HDMI
Control” to “Off,” then set “HDMI Control” to “On”
(page 52).
, For details on the HDMI Control function, see “About the
‘BRAVIA’ Theatre Sync features (for HDMI connections
only)” (page 11).
* “Design rule for Camera File system”: Image standards for digital
cameras regulated by JEITA (Japan Electronics and Information
Technology Industries Association).
The file name is not correctly displayed.
No sound is output from the HDMI OUT jack
, Try the following: 1Turn the player off and on again.
2Turn the connected equipment off and on again.
3Disconnect and then reconnect the HDMI cord.
, The HDMI OUT jack is connected to a DVI device (DVI
jacks do not accept audio signals).
The sound volume is low.
, The sound volume is low on some BDs/DVDs. The sound
volume may improve if you adjust the “Audio Control”
setting in “A/V Control” (page 27).
, The player can only display numbers and alphabet. Other
characters may be displayed differently.
, Depending on the writing software used, the input characters
may be displayed differently.
The disc does not start playing from the
beginning.
, Random Play or Repeat Play is selected (page 25).
, Resume play mode is on (page 20).
The player starts playing the disc
automatically.
The display language on the screen switches
automatically.
, The disc features an auto playback function.
Operation
The remote does not function.
, The batteries in the remote are weak (page 16).
, There are obstacles between the remote and the player.
, The distance between the remote and the player is too far.
, The remote is not pointed at the remote sensor on the player.
, When “HDMI Control” is set to “On” (page 52), the display
language on the screen automatically switches according to
the language setting of the connected TV (if you change the
setting on your TV, etc).
Playback stops automatically.
, While playing discs with an auto pause signal, the player
stops playback at the auto pause signal.
The player does not operate properly.
, When static electricity, etc., causes the player to operate
abnormally, unplug the player.
The disc does not play.
, The disc is turned over. Insert the disc with the playback side
facing down.
, Try the following: 1Turn the player off and on again.
2Turn the connected equipment off and on again.
3Disconnect and then connect the HDMI cord again.
, If the HDMI OUT jack is used for video output, changing the
video output resolution may solve the problem (page 46).
Press VIDEO FORMAT repeatedly until the picture appears
correctly.
54
53
The picture does not fill the screen, even
though the aspect ratio is set in “TV Type”
under “Video Setup.”
There is no picture or picture noise appears
when connected to the HDMI OUT jack.
,continued
55
56
1-13
The disc tray does not open and “LOCK”
appears on the front panel display.
, Contact your Sony dealer or local authorized Sony service
facility.
The disc tray does not open and you cannot
remove the disc even after you press Z.
, Turn on the player.
As soon as “POWER ON” appears on the front panel
display, press x on the player (not the remote) repeatedly
until the tray opens. Repeat the above procedure several
times if the tray does not open on the first try.
“UNPLAYABLE” appears when playing a DATA
DVD.
, See also “The photo file cannot be played” or “The MP3
audio track file cannot be played” (page 55).
, The MP3 audio track/JPEG image file you want to play/view
is damaged.
, The data is not MPEG-1 Audio Layer III data.
, The JPEG image file format does not conform to DCF*
(page 41).
, The JPEG image file has the extension “.JPG” or “.JPEG,”
but is not in JPEG format.
* “Design rule for Camera File system”: Image standards for digital
cameras regulated by JEITA (Japan Electronics and Information
Technology Industries Association).
The player does not accept any button.
, Hold down \/1 on the player for more than five seconds
until the indicators on the front panel display turn off.
Index to Parts and Controls
Self-Diagnosis Function
Buttons on the remote and the player have the same function if they have the same or similar name.
For details, see the pages in parentheses.
When the self-diagnosis function is activated to prevent the
player from malfunctioning, the “ERR” error code appears on
the front panel display indicating the cause.
Error code
Cause and/or corrective
action
AACS ERR
AACS read failure.
tRemove the protected disc.
LSI1 ERR
LSI2 ERR
LSI3 ERR
MEM ERR
FLASH ERR
ROM ERR
tContact your nearest Sony dealer
or local authorized Sony service
facility and give the error code.
Front panel
HDMI
Additional Information
A @/1 (20)
– Turns on the player, or sets to standby mode.
B Disc tray (20)
C H, X, x (20)
– Starts, pauses, or stops playback.
D ./> (24)
– Skips to the previous/next chapter or track.
– Scans forward or backwards when held down.
E A (20)
– Opens or closes the disc tray.
HD
FL OFF
F HDMI indicator (11)
– Lights up when an HDMI device is connected.
HD indicator (11)
– Lights up when outputting 720p/1080i/1080p
video signals.
FL OFF indicator (24)
– Lights up when the front panel display and other
indicators on the front panel are turned off.
G Remote sensor (16)
H Blu-ray Disc indicator
– Lights up when a BD is recognized.
– Lights up for a few seconds when the player is
turned on.
I Front panel display (59)
58
57
GNU License
Information
Front panel display
Regarding the GNU General
Public License
The software programs used on this component
include the GNU/Linux system.
The GNU/Linux system contains software
licensed for use based on the terms of a GNU
General Public License. If necessary, the user
may request the source code for this licensed
software. The source code is available on our
website. Access the following URL to download:
http://www.sony.net/Products/Linux
Please refrain from making inquiries about the
source code content.
Details of the GNU General Public License can
be found at the GNU website
(http://www.gnu.org).
The playback information is displayed as follows.
A H
– Lights up during playback.
Example: When playing a DVD VIDEO or a BD-ROM
B Playback information
z Hint
You can change the brightness of the front panel display by pressing
DIMMER (page 24).
GNU General Public License
A Current title number
C Elapsed time of the title
Rear panel
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software
Foundation, Inc.
59 Temple Place - Suite 330, Boston, MA 021111307, USA
Everyone is permitted to copy and distribute
verbatim copies of this license document, but
changing it is not allowed.
Additional Information
B Current chapter number
Note that the chapter number is not displayed if the
title’s elapsed time exceeds 10 hours.
◆Preamble
The licenses for most software are designed to
take away your freedom to share and change it.
By contrast, the GNU General Public License is
intended to guarantee your freedom to share and
change free software-to make sure the software is
free for all its users. This General Public License
applies to most of the Free Software
Foundation’s software and to any other program
whose authors commit to using it. (Some other
Free Software Foundation software is covered by
the GNU Lesser General Public License instead.)
You can apply it to your programs, too.
When we speak of free software, we are referring
to freedom, not price. Our General Public
Licenses are designed to make sure that you have
the freedom to distribute copies of free software
(and charge for this service if you wish), that you
receive source code or can get it if you want it,
that you can change the software or use pieces of
it in new free programs; and that you know you
can do these things.
To protect your rights, we need to make
restrictions that forbid anyone to deny you these
rights or to ask you to surrender the rights. These
restrictions translate to certain responsibilities
for you if you distribute copies of the software, or
if you modify it.
For example, if you distribute copies of such a
program, whether gratis or for a fee, you must
give the recipients all the rights that you have.
You must make sure that they, too, receive or can
get the source code. And you must show them
these terms so they know their rights.
We protect your rights with two steps: (1)
copyright the software, and (2) offer you this
license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we
want to make certain that everyone understands
that there is no warranty for this free software. If
the software is modified by someone else and
passed on, we want its recipients to know that
what they have is not the original, so that any
problems introduced by others will not reflect on
the original authors’ reputations.
Finally, any free program is threatened
constantly by software patents. We wish to avoid
the danger that redistributors of a free program
will individually obtain patent licenses, in effect
making the program proprietary. To prevent this,
For connections, see page 10 to 16.
COMPONENT
VIDEO OUT
VIDEO
OUT
DIGITAL OUT
PB
HDMI
OUT
PR
S VIDEO
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
5.1CH OUTPUT
AUDIO
OUT
Y
VIDEO
AC IN
FRONT
L
L
R
R
REAR
CENTER
WOOFER
A AC IN terminal (16)
F AUDIO OUT (L/R) jacks (13, 14)
B HDMI OUT jack (11, 12, 15)
G 5.1CH OUTPUT (FRONT L/R, REAR L/R, CENTER,
WOOFER) jacks (14)
C VIDEO OUT (VIDEO/S VIDEO) jacks (10)
D COMPONENT VIDEO OUT (Y/PB/PR) jacks (10)
E DIGITAL OUT (COAXIAL/OPTICAL) jacks (13, 14)
60
59
1-14
we have made it clear that any patent must be
licensed for everyone’s free use or not licensed at
all.
The precise terms and conditions for copying,
distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or
other work which contains a notice placed
by the copyright holder saying it may be
distributed under the terms of this General
Public License. The “Program”, below,
refers to any such program or work, and a
“work based on the Program” means either
the Program or any derivative work under
copyright law: that is to say, a work
containing the Program or a portion of it,
either verbatim or with modifications and/or
translated into another language.
(Hereinafter, translation is included without
limitation in the term “modification”.) Each
licensee is addressed as “you”.
Activities other than copying, distribution
and modification are not covered by this
License; they are outside its scope. The act
of running the Program is not restricted, and
the output from the Program is covered only
if its contents constitute a work based on the
Program (independent of having been made
by running the Program). Whether that is
true depends on what the Program does.
1. You may copy and distribute verbatim
copies of the Program’s source code as you
receive it, in any medium, provided that you
conspicuously and appropriately publish on
each copy an appropriate copyright notice
and disclaimer of warranty; keep intact all
the notices that refer to this License and to
the absence of any warranty; and give any
other recipients of the Program a copy of
this License along with the Program.
You may charge a fee for the physical act of
transferring a copy, and you may at your
option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the
Program or any portion of it, thus forming a
work based on the Program, and copy and
distribute such modifications or work under
the terms of Section 1 above, provided that
you also meet all of these conditions:
a) You must cause the modified files to
carry prominent notices stating that you
changed the files and the date of any
change.
b) You must cause any work that you
distribute or publish, that in whole or in
part contains or is derived from the
Program or any part thereof, to be
licensed as a whole at no charge to all
third parties under the terms of this
License.
c) If the modified program normally reads
commands interactively when run, you
must cause it, when started running for
such interactive use in the most
ordinary way, to print or display an
announcement including an
appropriate copyright notice and a
notice that there is no warranty (or else,
saying that you provide a warranty) and
that users may redistribute the program
under these conditions, and telling the
user how to view a copy of this License.
(Exception: if the Program itself is
interactive but does not normally print such
an announcement, your work based on the
Program is not required to print an
announcement.)
These requirements apply to the modified
work as a whole. If identifiable sections of
that work are not derived from the Program,
and can be reasonably considered
independent and separate works in
themselves, then this License, and its terms,
do not apply to those sections when you
distribute them as separate works. But when
you distribute the same sections as part of a
whole which is a work based on the
3.
4.
5.
Program, the distribution of the whole must
be on the terms of this License, whose
permissions for other licensees extend to the
entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to
claim rights or contest your rights to work
written entirely by you; rather, the intent is
to exercise the right to control the
distribution of derivative or collective
works based on the Program.
In addition, mere aggregation of another
work not based on the Program with the
Program (or with a work based on the
Program) on a volume of a storage or
distribution medium does not bring the other
work under the scope of this License.
You may copy and distribute the Program
(or a work based on it, under Section 2) in
object code or executable form under the
terms of Sections 1 and 2 above provided
that you also do one of the following:
a) Accompany it with the complete
corresponding machine-readable
source code, which must be distributed
under the terms of Sections 1 and 2
above on a medium customarily used
for software interchange; or,
b) Accompany it with a written offer,
valid for at least three years, to give any
third party, for a charge no more than
your cost of physically performing
source distribution, a complete
machine-readable copy of the
corresponding source code, to be
distributed under the terms of Sections
1 and 2 above on a medium customarily
used for software interchange; or,
c) Accompany it with the information you
received as to the offer to distribute
corresponding source code. (This
alternative is allowed only for
noncommercial distribution and only if
you received the program in object
code or executable form with such an
offer, in accord with Subsection b
above.)
The source code for a work means the
preferred form of the work for making
modifications to it. For an executable work,
complete source code means all the source
code for all modules it contains, plus any
associated interface definition files, plus the
scripts used to control compilation and
installation of the executable.
However, as a special exception, the source
code distributed need not include anything
that is normally distributed (in either source
or binary form) with the major components
(compiler, kernel, and so on) of the
operating system on which the executable
runs, unless that component itself
accompanies the executable.
If distribution of executable or object code
is made by offering access to copy from a
designated place, then offering equivalent
access to copy the source code from the
same place counts as distribution of the
source code, even though third parties are
not compelled to copy the source along with
the object code.
You may not copy, modify, sublicense, or
distribute the Program except as expressly
provided under this License. Any attempt
otherwise to copy, modify, sublicense or
distribute the Program is void, and will
automatically terminate your rights under
this License.
However, parties who have received copies,
or rights, from you under this License will
not have their licenses terminated so long as
such parties remain in full compliance.
You are not required to accept this License,
since you have not signed it. However,
nothing else grants you permission to
modify or distribute the Program or its
derivative works. These actions are
prohibited by law if you do not accept this
License. Therefore, by modifying or
distributing the Program (or any work based
Software Foundation, write to the Free
Software Foundation; we sometimes make
exceptions for this. Our decision will be
guided by the two goals of preserving the
free status of all derivatives of our free
software and of promoting the sharing and
reuse of software generally.
◆NO WARRANTY
11. BECAUSE THE PROGRAM IS
LICENSED FREE OF CHARGE, THERE
IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT
PERMITTED BYAPPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES
PROVIDE THEPROGRAM “AS IS”
WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIROR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY
WHOMAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING
ANY GENERAL,SPECIAL,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
◆END OF TERMS AND CONDITIONS
◆How to Apply These Terms to Your
New Programs
If you develop a new program, and you want it to
be of the greatest possible use to the public, the
best way to achieve this is to make it free
software which everyone can redistribute and
change under these terms.
To do so, attach the following notices to the
program. It is safest to attach them to the start of
each source file to most effectively convey the
exclusion of warranty; and each file should have
at least the “copyright” line and a pointer to
where the full notice is found.
<one line to give the program’s name and an
idea of what it does.>
Copyright (C) yyyy name of author
This program is free software; you can
redistribute it and/or modify it under the terms of
the GNU General Public License as published by
the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
This program is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU
General Public License along with this program;
if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.
Also add information on how to contact you by
electronic and paper mail.
If the program is interactive, make it output a
short notice like this when it starts in an
interactive mode:
Gnomovision version 69, Copyright (C)
year name of author
Gnomovision comes with ABSOLUTELY
NO WARRANTY; for details type ‘show
w’. This is free software, and you are
welcome to redistribute it under certain
conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show
c’ should show the appropriate parts of the
General Public License. Of course, the
commands you use may be called something
other than ‘show w’ and ‘show c’; they could
even be mouse-clicks or menu items-whatever
suits your program.
You should also get your employer (if you work
as a programmer) or your school, if any, to sign
a “copyright disclaimer” for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program ‘Gnomovision’ (which
makes passes at compilers) written by James
Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit
incorporating your program into proprietary
programs. If your program is a subroutine
library, you may consider it more useful to
permit linking proprietary applications with the
library. If this is what you want to do, use the
GNU Lesser General Public License instead of
this License.
GNU Lesser General Public
License
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software
Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 021111307, USA
Everyone is permitted to copy and distribute
verbatim copies of this license document, but
changing it is not allowed.
[This is the first released version of the Lesser
GPL. It also counts as the successor of the GNU
Library Public License, version 2, hence the
version number2.1.]
and recompiling it. And you must show them
these terms so they know their rights.
We protect your rights with a two-step method:
(1) we copyright the library, and (2) we offer you
this license, which gives you legal permission to
copy, distribute and/or modify the library.
To protect each distributor, we want to make it
very clear that there is no warranty for the free
library. Also, if the library is modified by
someone else and passed on, the recipients
should know that what they have is not the
original version, so that the original author’s
reputation will not be affected by problems that
might be introduced by others.
Finally, software patents pose a constant threat to
the existence of any free program. We wish to
make sure that a company cannot effectively
restrict the users of a free program by obtaining a
restrictive license from a patent holder.
Therefore, we insist that any patent license
obtained for a version of the library must be
consistent with the full freedom of use specified
in this license. Most GNU software, including
some libraries, is covered by the ordinary GNU
General Public License. This license, the GNU
Lesser General Public License, applies to certain
designated libraries, and is quite different from
the ordinary General Public License. We use this
license for certain libraries in order to permit
linking those libraries into non-free programs.
When a program is linked with a library, whether
statically or using a shared library, the
combination of the two is legally speaking a
combined work, a derivative of the original
library. The ordinary General Public License
therefore permits such linking only if the entire
combination fits its criteria of freedom. The
Lesser General Public License permits more lax
criteria for linking other code with the library.
We call this license the “Lesser” General Public
License because it does Less to protect the user’s
freedom than the ordinary General Public
License. It also provides other free software
developers Less of an advantage over competing
non-free programs. These disadvantages are the
reason we use the ordinary General Public
License for many libraries. However, the Lesser
license provides advantages in certain special
circumstances.
For example, on rare occasions, there may be a
special need to encourage the widest possible use
of a certain library, so that it becomes a de facto
standard. To achieve this, non-free programs
must be allowed to use the library.
A more frequent case is that a free library does
the same job as widely used non-free libraries. In
this case, there is little to gain by limiting the free
library to free software only, so we use the Lesser
General Public License.
In other cases, permission to use a particular
library in non-free programs enables a greater
number of people to use a large body of free
software. For example, permission to use the
GNU C Library in non-free programs enables
many more people to use the whole GNU
operating system, as well as its variant, the GNU/
Linux operating system.
Although the Lesser General Public License is
Less protective of the users’ freedom, it does
ensure that the user of a program that is linked
with the Library has the freedom and the
wherewithal to run that program using a
modified version of the Library.
The precise terms and conditions for copying,
distribution and modification follow. Pay close
attention to the difference between a “work based
on the library” and a “work that uses the library”.
The former contains code derived from the
library, whereas the latter must be combined with
the library in order to run.
Additional Information
on the Program), you indicate your
acceptance of this License to do so, and all
its terms and conditions for copying,
distributing or modifying the Program or
works based on it.
6. Each time you redistribute the Program (or
any work based on the Program), the
recipient automatically receives a license
from the original licensor to copy, distribute
or modify the Program subject to these
terms and conditions. You may not impose
any further restrictions on the recipients’
exercise of the rights granted herein. You
are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or
allegation of patent infringement or for any
other reason (not limited to patent issues),
conditions are imposed on you (whether by
court order, agreement or otherwise) that
contradict the conditions of this License,
they do not excuse you from the conditions
of this License. If you cannot distribute so as
to satisfy simultaneously your obligations
under this License and any other pertinent
obligations, then as a consequence you may
not distribute the Program at all. For
example, if a patent license would not
permit royalty-free redistribution of the
Program by all those who receive copies
directly or indirectly through you, then the
only way you could satisfy both it and this
License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid
or unenforceable under any particular
circumstance, the balance of the section is
intended to apply and the section as a whole
is intended to apply in other circumstances.
It is not the purpose of this section to induce
you to infringe any patents or other property
right claims or to contest validity of any
such claims; this section has the sole
purpose of protecting the integrity of the
free software distribution system, which is
implemented by public license practices.
Many people have made generous
contributions to the wide range of software
distributed through that system in reliance
on consistent application of that system; it is
up to the author/donor to decide if he or she
is willing to distribute software through any
other system and a licensee cannot impose
that choice.
This section is intended to make thoroughly
clear what is believed to be a consequence
of the rest of this License.
8. If the distribution and/or use of the Program
is restricted in certain countries either by
patents or by copyrighted interfaces, the
original copyright holder who places the
Program under this License may add an
explicit geographical distribution limitation
excluding those countries, so that
distribution is permitted only in or among
countries not thus excluded. In such case,
this License incorporates the limitation as if
written in the body of this License.
9. The Free Software Foundation may publish
revised and/or new versions of the General
Public License from time to time. Such new
versions will be similar in spirit to the
present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing
version number. If the Program specifies a
version number of this License which
applies to it and “any later version”, you
have the option of following the terms and
conditions either of that version or of any
later version published by the Free Software
Foundation. If the Program does not specify
a version number of this License, you may
choose any version ever published by the
Free Software Foundation.
10. If you wish to incorporate parts of the
Program into other free programs whose
distribution conditions are different, write to
the author to ask for permission. For
software which is copyrighted by the Free
◆Preamble
The licenses for most software are designed to
take away your freedom to share and change it.
By contrast, the GNU General Public Licenses
are intended to guarantee your freedom to share
and change free software-to make sure the
software is free for all its users. This license, the
Lesser General Public License, applies to some
specially designated software packages-typically
libraries-of the Free Software Foundation and
other authors who decide to use it. You can use it
too, but we suggest you first think carefully about
whether this license or the ordinary General
Public License is the better strategy to use in any
particular case, based on the explanations below.
When we speak of free software, we are referring
to freedom of use, not price. Our General Public
Licenses are designed to make sure that you have
the freedom to distribute copies of free software
(and charge for this service if you wish); that you
receive source code or can get it if you want it;
that you can change the software and use pieces
of it in new free programs; and that you are
informed that you can do these things.
To protect your rights, we need to make
restrictions that forbid distributors to deny you
these rights or to ask you to surrender these
rights. These restrictions translate to certain
responsibilities for you if you distribute copies of
the library or if you modify it.
For example, if you distribute copies of the
library, whether gratis or for a fee, you must give
the recipients all the rights that we gave you. You
must make sure that they, too, receive or can get
the source code. If you link other code with the
library, you must provide complete object files to
the recipients, so that they can relink them with
the library after making changes to the library
1.
2.
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any
software library or other program which
contains a notice placed by the copyright
holder or other authorized party saying it
may be distributed under the terms of this
Lesser General Public License (also called
“this License”). Each licensee is addressed
as “you”.
A “library” means a collection of software
functions and/or data prepared so as to be
conveniently linked with application
programs (which use some of those
functions and data) to form executables.
The “Library”, below, refers to any such
software library or work which has been
distributed under these terms. A “work
based on the Library” means either the
Library or any derivative work under
copyright law: that is to say, a work
containing the Library or a portion of it,
either verbatim or with modifications and/or
translated straightforwardly into another
language. (Hereinafter, translation is
included without limitation in the term
“modification”.)
“Source code” for a work means the
preferred form of the work for making
modifications to it. For a library, complete
source code means all the source code for all
modules it contains, plus any associated
interface definition files, plus the scripts
used to control compilation and installation
of the library.
Activities other than copying, distribution
and modification are not covered by this
License; they are outside its scope. The act
of running a program using the Library is
not restricted, and output from such a
program is covered only if its contents
constitute a work based on the Library
(independent of the use of the Library in a
tool for writing it). Whether that is true
depends on what the Library does and what
the program that uses the Library does.
You may copy and distribute verbatim
copies of the Library’s complete source
code as you receive it, in any medium,
provided that you conspicuously and
appropriately publish on each copy an
appropriate copyright notice and disclaimer
of warranty; keep intact all the notices that
refer to this License and to the absence of
any warranty; and distribute a copy of this
License along with the Library.
You may charge a fee for the physical act of
transferring a copy, and you may at your
option offer warranty protection in
exchange for a fee.
You may modify your copy or copies of the
Library or any portion of it, thus forming a
work based on the Library, and copy and
distribute such modifications or work under
the terms of Section 1 above, provided that
you also meet all of these conditions:
a) The modified work must itself be a
software library.
b) You must cause the files modified to
carry prominent notices stating that you
changed the files and the date of any
change.
c) You must cause the whole of the work
to be licensed at no charge to all third
parties under the terms of this License.
d) If a facility in the modified Library
refers to a function or a table of data to
be supplied by an application program
that uses the facility, other than as an
argument passed when the facility is
invoked, then you must make a good
faith effort to ensure that, in the event
an application does not supply such
function or table, the facility still
operates, and performs whatever part of
its purpose remains meaningful.
(For example, a function in a library to
compute square roots has a purpose that is
entirely well-defined independent of the
application. Therefore, Subsection 2d
requires that any application-supplied
function or table used by this function must
be optional: if the application does not
supply it, the square root function must still
compute square roots.) These requirements
apply to the modified work as a whole. If
identifiable sections of that work are not
derived from the Library, and can be
3.
4.
5.
reasonably considered independent and
separate works in themselves, then this
License, and its terms, do not apply to those
sections when you distribute them as
separate works. But when you distribute the
same sections as part of a whole which is a
work based on the Library, the distribution
of the whole must be on the terms of this
license, whose permissions for other
licensees extend to the entire whole, and
thus to each and every part regardless of
who wrote it.
Thus, it is not the intent of this section to
claim rights or contest your rights to work
written entirely by you; rather, the intent is
to exercise the right to control the
distribution of derivative or collective
works based on the Library. In addition,
mere aggregation of another work not based
on the Library with the Library (or with a
work based on the Library) on a volume of a
storage or distribution medium does not
bring the other work under the scope of this
License.
You may opt to apply the terms of the
ordinary GNU General Public License
instead of this License to a given copy of the
Library. To do this, you must alter all the
notices that refer to this License, so that they
refer to the ordinary GNU General Public
License, version 2, instead of to this
License. (If a newer version than version 2
of the ordinary GNU General Public
License has appeared, then you can specify
that version instead if you wish.) Do not
make any other change in these notices.
Once this change is made in a given copy, it
is irreversible for that copy, so the ordinary
GNU General Public License applies to all
subsequent copies and derivative works
made from that copy. This option is useful
when you wish to copy part of the code of
the Library into a program that is not a
library.
You may copy and distribute the Library (or
a portion or derivative of it, under Section 2)
in object code or executable form under the
terms of Sections1 and 2 above provided
that you accompany it with the complete
corresponding machine-readable source
code, which must be distributed under the
terms of Sections 1 and 2 above on a
medium customarily used for software
interchange.
If distribution of object code is made by
offering access to copy from a designated
place, then offering equivalent access to
copy the source code from the same place
satisfies the requirement to distribute the
source code, even though third parties are
not compelled to copy the source along with
the object code.
A program that contains no derivative of
any portion of the Library, but is designed to
work with the Library by being compiled or
linked with it, is called a “work that uses the
Library”. Such a work, in isolation, is not a
derivative work of the Library, and
therefore falls outside the scope of this
License. However, linking a “work that uses
the Library” with the Library creates an
executable that is a derivative of the Library
(because it contains portions of the Library),
rather than a “work that uses the library”.
The executable is therefore covered by this
License. Section 6 states terms for
distribution of such executables.
When a “work that uses the Library” uses
material from a header file that is part of the
Library, the object code for the work may be
a derivative work of the Library even
though the source code is not. Whether this
is true is especially significant if the work
can be linked without the Library, or if the
work is itself a library. The threshold for this
to be true is not precisely defined by law.
If such an object file uses only numerical
parameters, data structure layouts and
accessors, and small macros and small
inline functions (ten lines or less in length),
,continued
62
61
6.
component itself accompanies the
executable.
It may happen that this requirement
contradicts the license restrictions of
other proprietary libraries that do not
normally accompany the operating
system. Such a contradiction means
you cannot use both them and the
Library together in an executable that
you distribute.
7. You may place library facilities that are a
work based on the Library side-by-side in a
single library together with other library
facilities not covered by this License, and
distribute such a combined library, provided
that the separate distribution of the work
based on the Library and of the other library
facilities is otherwise permitted, and
provided that you do these two things:
a) Accompany the combined library with
a copy of the same work based on the
Library, uncombined with any other
library facilities. This must be
distributed under the terms of the
Sections above.
b) Give prominent notice with the
combined library of the fact that part of
it is a work based on the Library, and
explaining where to find the
accompanying uncombined form of the
same work.
8. You may not copy, modify, sublicense, link
with, or distribute the Library except as
expressly provided under this License. Any
attempt otherwise to copy, modify,
sublicense, link with, or distribute the
Library is void, and will automatically
terminate your rights under this License.
However, parties who have received copies,
or rights, from you under this License will
not have their licenses terminated so long as
such parties remain in full compliance.
9. You are not required to accept this License,
since you have not signed it. However,
nothing else grants you permission to
modify or distribute the Library or its
derivative works. These actions are
prohibited by law if you do not accept this
License. Therefore, by modifying or
distributing the Library(or any work based
on the Library), you indicate your
acceptance of this License to do so, and all
its terms and conditions for copying,
distributing or modifying the Library or
works based on it.
10. Each time you redistribute the Library (or
any work based on the Library), the
recipient automatically receives a license
from the original licensor to copy,
distribute, link with or modify the Library
subject to these terms and conditions. You
may not impose any further restrictions on
the recipients’ exercise of the rights granted
herein. You are not responsible for
enforcing compliance by third parties with
this License.
11. If, as a consequence of a court judgment or
allegation of patent infringement or for any
other reason (not limited to patent issues),
conditions are imposed on you (whether by
court order, agreement or otherwise) that
contradict the conditions of this License,
they do not excuse you from the conditions
of this License. If you cannot distribute so as
to satisfy simultaneously your obligations
under this License and any other pertinent
obligations, then as a consequence you may
not distribute the Library at all.
For example, if a patent license would not
permit royalty-free redistribution of the
Library by all those who receive copies
directly or indirectly through you, then the
only way you could satisfy both it and this
License would be to refrain entirely from
distribution of the Library. If any portion of
this section is held invalid or unenforceable
under any particular circumstance, the
balance of the section is intended to apply,
and the section as a whole is intended to
apply in other circumstances.
It is not the purpose of this section to induce
you to infringe any patents or other property
right claims or to contest validity of any
such claims; this section has the sole
purpose of protecting the integrity of the
free software distribution system which is
implemented by public license practices.
Many people have made generous
contributions to the wide range of software
distributed through that system in reliance
on consistent application of that system; it is
up to the author/donor to decide if he or she
is willing to distribute software through any
other system and a licensee cannot impose
that choice.
This section is intended to make thoroughly
clear what is believed to be a consequence
of the rest of this License.
12. If the distribution and/or use of the Library
is restricted in certain countries either by
patents or by copyrighted interfaces, the
original copyright holder who places the
Library under this License may add an
explicit geographical distribution limitation
excluding those countries, so that
distribution is permitted only in or among
countries not thus excluded. In such case,
this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may publish
revised and/or new versions of the Lesser
General Public License from time to time.
Such new versions will be similar in spirit to
the present version, but may differ in detail
to address new problems or concerns.
Each version is given a distinguishing
version number. If the Library specifies a
version number of this License which
applies to it and “any later version”, you
have the option of following the terms and
conditions either of that version or of any
later version published by the Free Software
Foundation. If the Library does not specify
a license version number, you may choose
any version ever published by the Free
Software Foundation.
14. If you wish to incorporate parts of the
Library into other free programs whose
distribution conditions are incompatible
with these, write to the author to ask for
permission. For software which is
copyrighted by the Free Software
Foundation, write to the Free Software
Foundation; we sometimes make exceptions
for this. Our decision will be guided by the
two goals of preserving the free status of all
derivatives of our free software and of
promoting the sharing and reuse of software
generally.
ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE LIBRARY
(INCLUDING BUT NOTLIMITED TO
LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OFTHE
LIBRARY TO OPERATE WITH ANY
OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
◆END OF TERMS AND CONDITIONS
◆How to Apply These Terms to Your
New Libraries
If you develop a new library, and you want it to
be of the greatest possible use to the public, we
recommend making it free software that
everyone can redistribute and change. You can
do so by permitting redistribution under these
terms (or, alternatively, under the terms of the
ordinary General Public License).
To apply these terms, attach the following
notices to the library. It is safest to attach them to
the start of each source file to most effectively
convey the exclusion of warranty; and each file
should have at least the “copyright” line and a
pointer to where the full notice is found.
<one line to give the library’s name and an
idea of what it does.>
Copyright (C) year name of author
This library is free software; you can redistribute
it and/or modify it under the terms of the GNU
Lesser General Public License as published by
the Free Software Foundation; either version 2.1
of the License, or (at your option) any later
version.
This library is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU Lesser
General Public License for more details.
You should have received a copy of the GNU
Lesser General Public License along with this
library; if not, write to the Free Software
Foundation, Inc., 59Temple Place, Suite 330,
Boston, MA 02111-1307, USA
Also add information on how to contact you by
electronic and paper mail.
You should also get your employer (if you work
as a programmer) or your school, if any, to sign
a “copyright disclaimer” for the library, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright
interest in the library ‘Frob’ (a library for
tweaking knobs) written by James Random
Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
Additional Information
then the use of the object file is unrestricted,
regardless of whether it is legally a
derivative work. (Executables containing
this object code plus portions of the Library
will still fall under Section 6.)
Otherwise, if the work is a derivative of the
Library, you may distribute the object code
for the work under the terms of Section 6.
Any executables containing that work also
fall under Section 6, whether or not they are
linked directly with the Library itself.
As an exception to the Sections above, you
may also combine or link a “work that uses
the Library” with the Library to produce a
work containing portions of the Library, and
distribute that work under terms of your
choice, provided that the terms permit
modification of the work for the customer’s
own use and reverse engineering for
debugging such modifications.
You must give prominent notice with each
copy of the work that the Library is used in
it and that the Library and its use are covered
by this License. You must supply a copy of
this License. If the work during execution
displays copyright notices, you must include
the copyright notice for the Library among
them, as well as a reference directing the
user to the copy of this License.
Also, you must do one of these things:
a) Accompany the work with the
complete corresponding machinereadable source code for the Library
including whatever changes were used
in the work (which must be distributed
under Sections 1 and 2 above); and, if
the work is an executable linked with
the Library, with the complete
machine-readable “work that uses the
Library”, as object code and/or source
code, so that the user can modify the
Library and then relink to produce a
modified executable containing the
modified Library. (It is understood that
the user who changes the contents of
definitions files in the Library will not
necessarily be able to recompile the
application to use the modified
definitions.)
b) Use a suitable shared library
mechanism for linking with the
Library. A suitable mechanism is one
that (1) uses at run time a copy of the
library already present on the user’s
computer system, rather than copying
library functions into the executable,
and (2) will operate properly with a
modified version of the library, if the
user installs one, as long as the
modified version is interfacecompatible with the version that the
work was made with.
c) Accompany the work with a written
offer, valid for at least three years, to
give the same user the materials
specified in Subsection 6a, above, for a
charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by
offering access to copy from a
designated place, offer equivalent
access to copy the above specified
materials from the same place.
e) Verify that the user has already
received a copy of these materials or
that you have already sent this user a
copy.
For an executable, the required form of
the “work that uses the Library” must
include any data and utility programs
needed for reproducing the executable
from it. However, as a special
exception, the materials to be
distributed need not include anything
that is normally distributed (in either
source or binary form) with the major
components (compiler, kernel, and so
on) of the operating system on which
the executable runs, unless that
◆NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED
FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO
THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE
LIBRARY “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIESOF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF
THELIBRARY IS WITH YOU. SHOULD
THE LIBRARY PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR
CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY
WHOMAY MODIFY AND/OR
REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING
OpenSSL License
◆OpenSSL
Copyright (c) 1998-2004 The OpenSSL Project.
All rights reserved.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following conditions
are met:
1. Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
,continued
64
63
1-15
3.
4.
5.
6.
All advertising materials mentioning
features or use of this software must display
the following acknowledgment:
“This product includes software developed
by the OpenSSL Project for use in the
OpenSSL Toolkit.
(http://www.openssl.org/)”
The names “OpenSSL Toolkit” and
“OpenSSL Project” must not be used to
endorse or promote products derived from
this software without prior written
permission.
For written permission, please contact
[email protected].
Products derived from this software may not
be called “OpenSSL” nor may “OpenSSL”
appear in their names without prior written
permission of the OpenSSL Project.
Redistributions of any form whatsoever
must retain the following acknowledgment:
“This product includes software developed
by the OpenSSL Project for use in the
OpenSSL Toolkit
(http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE
OpenSSL PROJECT “AS IS” AND ANY
EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE OpenSSL PROJECT OR
ITS CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
This product includes cryptographic software
written by Eric Young ([email protected]).
This product includes software written by Tim
Hudson ([email protected]).
Original SSLeay License
◆Original SSLeay
Copyright (C) 1995-1998 Eric Young
([email protected]) All rights reserved.
This package is an SSL implementation written
by Eric Young ([email protected]).
The implementation was written so as to conform
with Netscapes SSL.
This library is free for commercial and noncommercial use as long as the following
conditions are aheared to. The following
conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES,
etc., code; not just the SSL code. The SSL
documentation included with this distribution is
covered by the same copyright terms except that
the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young's, and as such any
Copyright notices in the code are not to be
removed.
If this package is used in a product, Eric Young
should be given attribution as the author of the
parts of the library used.
This can be in the form of a textual message at
program startup or in documentation (online or
textual) provided with the package.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following conditions
are met:
1. Redistributions of source code must retain
the copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
3. All advertising materials mentioning
features or use of this software must display
the following acknowledgement:
“This product includes cryptographic
software written by Eric Young
([email protected])”
The word 'cryptographic' can be left out if
the rouines from the library being used are
not cryptographic related :-).
4. If you include any Windows specific code
(or a derivative thereof) from the apps
directory (application code) you must
include an acknowledgement:
“This product includes software written by
Tim Hudson ([email protected])”
THIS SOFTWARE IS PROVIDED BY ERIC
YOUNG ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any
publically available version or derivative of this
code cannot be changed. i.e. this code cannot
simply be copied and put under another
distribution licence [including the GNU Public
Licence.]
FreeType
The FreeType Project is copyright (C) 19962000 by David Turner, Robert Wilhelm, and
Werner Lemberg. All rights reserved except as
specified below.
THE FREETYPE PROJECT IS PROVIDED
‘AS IS’ WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL ANY OF
THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY DAMAGES CAUSED
BY THE USE OR THE INABILITY TO USE,
OF THE FREETYPE PROJECT.
Howl
Copyright (c) 2003, 2004 Porchdog Software All
rights reserved.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
jpeg-6b
If only executable code is distributed, then the
accompanying documentation must state that
“this software is based in part on the work of the
Independent JPEG Group”.
libpng
COPYRIGHT NOTICE, DISCLAIMER, and
LICENSE:
If you modify libpng you may insert additional
notices immediately following this sentence.
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5
- October 3, 2002, are Copyright (c) 2000-2002
Glenn Randers-Pehrson, and are distributed
according to the same disclaimer and license as
libpng-1.0.6 with the following individuals
added to the list of Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the
disclaimer:
There is no warranty against interference
with your enjoyment of the library or
against infringement. There is no warranty
that our efforts or the library will fulfill any
of your particular purposes or needs. This
library is provided with all faults, and the
entire risk of satisfactory quality,
performance, accuracy, and effort is with
the user.
libpng versions 0.97, January 1998, through
1.0.6, March 20, 2000, are Copyright (c) 1998,
1999 Glenn Randers-Pehrson, and are distributed
according to the same disclaimer and license as
libpng-0.96, with the following individuals
added to the list of Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96,
May 1997, are Copyright (c) 1996, 1997 Andreas
Dilger
Distributed according to the same disclaimer and
license as libpng-0.88, with the following
individuals added to the list of Contributing
Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
For the purposes of this copyright and license,
“Contributing Authors” is defined as the
following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”.
The Contributing Authors and Group 42, Inc.
disclaim all warranties, expressed or implied,
including, without limitation, the warranties of
merchantability and of fitness for any purpose.
The Contributing Authors and Group 42, Inc.
assume no liability for direct, indirect, incidental,
special, exemplary, or consequential damages,
which may result from the use of the PNG
Reference Library, even if advised of the
possibility of such damage.
Permission is hereby granted to use, copy,
modify, and distribute this source code, or
portions hereof, for any purpose, without fee,
subject to the following restrictions:
1.
2.
3.
The origin of this source code must not be
misrepresented.
Altered versions must be plainly marked as
such and must not be misrepresented as
being the original source.
This Copyright notice may not be removed
or altered from any source or altered source
distribution.
The Contributing Authors and Group 42, Inc.
specifically permit, without fee, and encourage
the use of this source code as a component to
supporting the PNG file format in commercial
products. If you use this source code in a product,
acknowledgment is not required but would be
appreciated.
A “png_get_copyright” function is available, for
convenient use in “about” boxes and the like:
printf(“%s”,png_get_copyright(NULL));
Glossary
Luxi fonts copyright (c) 2001 by Bigelow &
Holmes Inc. Luxi font instruction code copyright
(c) 2001 by URW++ GmbH. All Rights
Reserved. Luxi is a registered trademark of
Bigelow & Holmes Inc.
THE FONT SOFTWARE IS PROVIDED “AS
IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
NONINFRINGEMENT OF COPYRIGHT,
PATENT, TRADEMARK, OR OTHER
RIGHT. IN NO EVENT SHALL BIGELOW &
HOLMES INC. OR URW++ GMBH. BE
LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, INCLUDING ANY
GENERAL, SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF THE USE OR
INABILITY TO USE THE FONT SOFTWARE
OR FROM OTHER DEALINGS IN THE FONT
SOFTWARE.
AACS
“Advanced Access Content System” is a
specification for managing digital
entertainment contents stored on the next
generation of prerecorded and recorded
optical media. The specification enables
consumers to enjoy digital entertainment
content, including high-definition
content.
AVCHD (page 6)
The AVCHD format is a high definition
digital video camera format used to
record SD (standard definition) or HD
(high definition) signals of either the
1080i specification*1 or the 720p
specification*2 on DVDs, using efficient
data compression coding technology.
The MPEG-4 AVC/H.264 format is
adopted to compress video data, and the
Dolby Digital or Linear PCM is used to
compress audio data. The MPEG-4
AVC/H.264 format is capable of
compressing images at higher efficiency
than that of the conventional image
compression format. The MPEG-4
AVC/ H.264 format enables a high
definition (HD) video signal shot on a
digital video camera recorder to be
recorded on DVDs in the same way as
for a standard definition (SD) television
signal.
TIFF
Copyright (c) 1988-1997 Sam Leffler
Copyright (c) 1991-1997 Silicon Graphics, Inc.
THE SOFTWARE IS PROVIDED “AS-IS”
AND WITHOUT WARRANTY OF ANY
KIND, EXPRESS, IMPLIED OR
OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR
SILICON GRAPHICS BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OF ANY
KIND, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA
OR PROFITS, WHETHER OR NOT ADVISED
OF THE POSSIBILITY OF DAMAGE, AND
ON ANY THEORY OF LIABILITY, ARISING
OUT OF OR IN CONNECTION WITH THE
USE OR PERFORMANCE OF THIS
SOFTWARE.
Also, the PNG logo (in PNG format, of course) is
supplied in the files “pngbar.png” and
“pngbar.jpg (88x31) and “pngnow.png” (98x31).
This software is based in part on zlib see http://
www.zlib.net for information.
Libpng is OSI Certified Open Source Software.
OSI Certified Open Source is a certification mark
of the Open Source Initiative.
This software is based in part on Mozilla Public
License 1.1 see http://www.mozilla.org/MPL/
for information.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 3, 2004
This software is based in part on Apple Public
Source License or the reciient's rights thereunder
see http://developer.apple.com/ for information.
Libungif
This software is based in part on Intel License see
http://www.intel.com/ for information.
Additional Information
libpng version 1.2.6, December 3, 2004, is
Copyright (c) 2004 Glenn Randers-Pehrson, and
is distributed according to the same disclaimer
and license as libpng-1.2.5 with the following
individual added to the list of Contributing
Authors
libpng versions 0.5, May 1995, through 0.88,
January 1996, are Copyright (c) 1995, 1996 Guy
Eric Schalnat, Group 42, Inc.
*1 A high definition specification that
utilizes1080 effective scanning lines and
the interlace format.
*2 A high definition specification that utilizes
720 effective scanning lines and the
progressive format.
BD-J application
The BD-ROM format supports Java for
interactive functions.
“BD-J” offers content providers almost
unlimited functionality when creating
interactive BD-ROM titles.
The GIFLIB distribution is Copyright (c) 1997
Eric S. Raymond
THE SOFTWARE IS PROVIDED “AS IS”,
WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
BD-R
TinyLogin
This software is copyright 1988 - 1994, Julianne
Frances Haugh. All rights reserved.
BD-R (Blu-ray Disc Recordable) is a
recordable, write-once Blu-ray Disc,
available in the same capacities as the
BD below. Since contents can be
recorded and cannot be overwritten, a
BD-R can be used to archive valuable
data or storing and distributing video
material.
The shadow utilities license
This software is copyright 1988 - 1994, Julianne
Frances Haugh. All rights reserved.
Vera.ttf/VeraMono.ttf
Copyright © 2003 by Bitstream, Inc. All Rights
Reserved. Bitstream Vera
SansBitstreamVeraSans-RomanRelease 1.10
Copyright © 2003 by Bitstream, Inc. All Rights
Reserved. Bitstream Vera is a trademark of
Bitstream, Inc.
Interlace format shows every other line
of an image as a single “field” and is the
standard method for displaying images
on television. The even number field
shows the even numbered lines of an
image, and the odd numbered field
shows the odd numbered lines of an
image.
DVD-RW (page 5)
A DVD-RW is a recordable and
rewritable disc that is the same size as a
DVD VIDEO. The DVD-RW has two
different modes: VR mode and Video
mode. DVDs created in Video mode
have the same format as a DVD VIDEO,
while discs created in VR (Video
Recording) mode allow the contents to
be programmed or edited.
DVD+R (page 5)
DVD+RW (page 5)
A DVD+RW (read “plus RW”) is a
recordable and rewritable disc.
DVD+RWs use a recording format that
is comparable to the DVD VIDEO
format.
Film-based software, Video-based
software
DVDs can be classified as Film-based or
Video-based software. Film-based
DVDs contain the same images (24
frames per second) that are shown at
movie theaters. Video-based DVDs,
such as television dramas or sitcoms,
display images at 30 frames (or 60
fields) per second.
One of the video data compression
schemes established by the Moving
Picture Experts Group (MPEG), which is
adopted for DVD VIDEOs and digital
broadcasts worldwide. The scheme
specifies MPEG-2 PS (Program Stream)
for recordable media such as a DVD
VIDEO, and MPEG-2 TS (Transport
Stream) for digital broadcasts and other
communications.
Pop-up menu
An enhanced menu operation available
on BD-ROMs. The pop-up menu
appears when MENU is pressed during
playback, and can be operated while
playback is in progress.
Progressive format
Compared to the Interlace format that
alternately shows every other line of an
image (field) to create one frame, the
Progressive format shows the entire
image at once as a single frame. This
means that while the Interlace format can
show 30 frames/60 fields in one second,
the Progressive format can show 60
frames in one second. The overall
picture quality increases and still images,
text, and horizontal lines appear sharper.
Title (page 26)
The longest section of a picture or music
feature on a DVD, movie, etc., in video
software, or the entire album in audio
software.
Specifications
Language Code
List
A disc format developed for recording/
playing high-definition (HD) video (for
HDTV, etc.), and for storing large
amounts of data. A single layer Blu-ray
Disc holds up to 25 GB, and a dual-layer
Blu-ray Disc holds up to 50 GB of data.
Digital audio compression technology
that DTS, Inc. developed. This
technology conforms to multi-channel
surround sound. The rear channel is
stereo and there is a discrete subwoofer
channel in this format. DTS provides the
same discrete channels of high quality
digital audio.
Good channel separation is realized
because all of the channel data is
recorded discretely and little
deterioration occurs because all channel
data processing is digital.
DTS-HD (page 48)
Chapter (page 25)
Sections of a picture or a music feature
that are smaller than titles. A title is
composed of several chapters.
Depending on the disc, no chapters may
be recorded.
Dolby Digital (page 47)
Digital audio compression technology
developed by Dolby Laboratories. This
technology conforms to multi-channel
surround sound. The rear channel is
stereo and there is a discrete subwoofer
channel in this format. Dolby Digital
provides the same discrete channels of
high quality digital audio found in
“Dolby Digital” theater surround sound
systems. Good channel separation is
realized because all of the channel data is
recorded discretely and little
deterioration occurs because all channel
data processing is digital.
Dolby Digital Plus (page 48)
Developed as an extension to Dolby
Digital, the audio coding technology
supports 7.1 multi-channel surround
sound.
Dolby Surround (Pro Logic)
(page 47)
Audio signal processing technology that
Dolby Laboratories developed for
surround sound. When the input signal
contains a surround component, the Pro
Logic process outputs the front, center
and rear signals. The rear channel is
monaural.
DTS-HD is an extended format of the
Coherent Acoustics audio coding
system, which also encompasses DTS
Digital Surround, DTS-ES, and DTS 96/
24. DTS-HD is highly flexible in
supporting the number of discrete
surround sound channels. While 7.1ch
surround sound is planned for Blu-ray
Discs, the audio signals can be
downmixed to 5.1 or 2 channels for
backward compatibility, and the
reproduced audio quality can either be at
the bit rate of DTS Digital Surround or
the lossless mode.
DVD VIDEO (page 5)
A disc format that contains up to eight
hours of moving pictures on a disc the
same diameter as a CD. A single-layer
single sided DVD holds up to 4.7 GB; a
double layer single-sided DVD, 8.5 GB;
a single layer double-sided DVD, 9.4
GB; double-layer double-sided DVD, 17
GB. The MPEG 2 format is adopted for
the efficient video data compression.
The variable rate coding technology that
changes the data to be allocated
according to the status of the picture is
adopted for reproducing high-quality
pictures. Audio information is recorded
in a multi-channel format, such as Dolby
Digital, allowing for a realistic audio
presence.
Language (abbr.)
Code
Language (abbr.)
Code
Hindi (hi)
0809
Sinhalese (si)
1909
Croatian (hr)
0818
lovak (sk)
1911
Hungarian (hu)
0821
Slovenian (sl)
1912
Armenian (hy)
0825
Samoan (sm)
1913
Interlingua (ia)
0901
Shona (sn)
1914
Interlingue (ie)
0905
Somali (so)
1915
Laser: Semiconductor laser
Language (abbr.)
Code
Inupiak (ik)
0911
Albanian (sq)
Outputs
Japanese (ja)
1001
Indonesian (in)
0914
Serbian (sr)
1918
(Jack name: Jack type/Output level/
Load impedance)
AUDIO OUT L/R:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm (wave
length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
5.1CH OUTPUT:
Phono jack/2 Vrms/10 kilohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT(Y, PB,
PR):
Phono jack/Y: 1.0 Vp-p/PB, PR:
progressive or interlace
= 0.7 Vp-p/75 ohms
VIDEO: Phono jack/1.0 Vp-p/75 ohms
S VIDEO: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.286 Vp-p/75 ohms
English (en)
0514
Icelandic (is)
0919
Siswati (ss)
1919
French (fr)
0618
Hebrew (iw)
0923
Sesotho (st)
German (de)
0405
Yiddish (ji)
1009
Sundanese (su)
1921
Italian (it)
0920
Javanese (jw)
1023
Swedish (sv)
1922
For details, see page 49.
System
General
Power requirements:
120 V AC, 60 Hz
Power consumption: 33 W
Dimensions (approx.):
430 u 79 u 375 mm (17 × 3 1/8 ×
14 7/8 in.) (width/height/depth) incl.
projecting parts
Mass (approx.): 4.5 kg (10 lb)
Operating temperature:
5 ºC to 35 ºC (41°F to 95°F)
Operating humidity:
25 % to 80 %
Spanish (es)
See page 9.
HDMI is an interface that supports both
video and audio on a single digital
connection. The HDMI connection
carries standard to high definition video
signals and multi-channel audio signals
to AV components such as HDMI
equipped TVs, in digital form without
degradation.
The HDMI specification supports HDCP
(High-bandwidth Digital Contents
Protection), a copy protection
technology for digital entertainment
contents for HDMI.
Specifications and design are subject to
change without notice.
67
68
1-16
1920
0519
Georgian (ka)
1101
Swahili (sw)
1923
1412
Kazakh (kk)
1111
Tamil (ta)
2001
Russian (ru)
1821
Greenlandic (kl)
1112
Telugu (te)
2005
Chinese (zh)
2608
Cambodian (km)
1113
Tajik (tg)
2007
Korean (ko)
1115
Kannada (kn)
1114
Thai (th)
Greek (el)
0512
Kashmiri (ks)
1119
Tigrinya (ti)
2009
Afar (aa)
0101
Kurdish (ku)
1121
Turkmen (tk)
2011
2008
0102
Kirghiz (ky)
1125
Tagalog (tl)
2012
Afrikaans (af)
0106
Latin (la)
1201
Setswana (tn)
2014
Amharic (am)
0113
Lingala (ln)
1214
Tonga (to)
2015
Arabic (ar)
0118
Laothian (lo)
1215
Turkish (tr)
2018
Assamese (as)
0119
Lithuanian (lt)
1220
Tsonga (ts)
2019
Aymara (ay)
0125
Latvian (lv)
1222
Tatar (tt)
2020
Azerbaijani (az)
Supplied accessories
HDMI (High-Definition Multimedia
Interface)
1917
Dutch (nl)
Abkhazian (ab)
Additional Information
A DVD+R (read “plus R”) is a
recordable disc that is the same size as a
DVD VIDEO. Contents can be recorded
only once to a DVD+R, and will have the
same format as a DVD VIDEO.
MPEG-2
Blu-ray Disc (BD) (page 5)
DTS (page 47)
66
65
Interlace format
Dolby TrueHD is a lossless coding
technology that supports up to 8
channels of multi-channel surround
sound for the next generation optical
discs. The reproduced sound is true to
the original source bit-for-bit.
BD-RE (Blu-ray Disc Rewritable) is a
recordable and rewritable Blu-ray Disc,
available in the same capacities as the
BD below. The re-recordable feature
makes extensive editing and timeshifting applications possible.
Bigelow & Holmes Inc and URW++ GmbH Luxi
font license
A DVD-R is a recordable disc that is the
same size as a DVD VIDEO. Contents
can be recorded only once to a DVD-R,
and will have the same format as a DVD
VIDEO. The DVD-R has two different
modes: VR mode and Video mode.
DVDs created in Video mode have the
same format as a DVD VIDEO, while
discs created in VR (Video Recording)
mode allow the contents to be
programmed or edited.
Dolby TrueHD (page 48)
BD-ROMs (Blu-ray Disc Read-Only
Memory) are commercially produced
discs and are available in the same
capacities as the BD below. Other than
conventional movie and video contents,
these discs have enhanced features such
as interactive content, menu operations
using pop-up menus (see below),
selection of subtitle display, and
slideshow. Although a BD-ROM may
contain any form of data, most BD ROM
discs will contain movies in High
Definition format, for playback on Bluray Disc players.
BD-RE
Luxi font
DVD-R (page 5)
BD-ROM (page 5)
0126
Malagasy (mg)
1307
Twi (tw)
Bashkir (ba)
0201
Maori (mi)
1309
Ukrainian (uk)
2111
Byelorussian (be)
0205
Macedonian (mk)
1311
Urdu (ur)
2118
Bulgarian (bg)
0207
Malayalam (ml)
1312
Uzbek (uz)
2126
Bihari (bh)
0208
Mongolian (mn)
1314
Vietnamese (vi)
2209
Bislama (bi)
0209
Moldavian (mo)
1315
Volapük (vo)
2215
Bengali (bn)
2023
0214
Marathi (mr)
1318
Wolof (wo)
2315
Tibetan (bo)
0215
Malay (ms)
1319
Xhosa (xh)
2408
Breton (br)
0218
Maltese (mt)
1320
Yoruba (yo)
2515
Catalan (ca)
0301
Burmese (my)
1325
Zulu (zu)
2621
Corsican (co)
0315
Nauru (na)
1401
Czech (cs)
0319
Nepali (ne)
1405
Welsh (cy)
0325
Norwegian (no)
Danish (da)
0401
Occitan (oc)
1503
Bhutani (dz)
0426
Oromo (om)
1513
Esperanto (eo)
1415
0515
Oriya (or)
Estonian (et)
0520
Panjabi (pa)
1601
Basque (eu)
0521
Polish (pl)
1612
Persian (fa)
0601
Pashto, Pushto (ps)
1619
Finnish (fi)
0609
Portuguese (pt)
1620
Fiji (fj)
0610
Quechua (qu)
1721
Faroese (fo)
0615
Rhaeto-Romance (rm)
1813
Frisian (fy)
0625
Kirundi (rn)
1814
Irish (ga)
0701
Romanian (ro)
1815
Scots-Gaelic (gd)
0704
Kinyarwanda (rw)
1823
Galician (gl)
0712
Sanskrit (sa)
1901
Guarani (gn)
0714
Sindhi (sd)
1904
Gujarati (gu)
0721
Sangho (sg)
1907
Hausa (ha)
0801
Serbo-Croatian (sh)
1908
1518
Index
Parental Control
Country/Area
Code List
Words in quotations appear in the onscreen displays.
Area (abbr.)
Code
Argentina (ar)
0118
Numerics
Australia (au)
0121
5.1CH OUTPUT 14, 51
Austria (at)
0120
Belgium (be)
0205
Brazil (br)
0218
Canada (ca)
0301
0314
Denmark (dk)
0411
Finland (fi)
0609
France (fr)
0618
Germany (de)
A
“A/V Control” 22
AACS 66
ANGLE 24
AUDIO 24
“Audio Control” 27
“Audio Output Mode” 51
“Audio Setup” 47
AVCHD 6, 66
0312
China (cn)
B
0405
0811
India (in)
0914
Indonesia (id)
0904
Italy (it)
0920
Batteries 16
Blu-ray Disc 5, 66
‘BRAVIA’ Theatre Sync 11
Additional Information
Hong Kong (hk)
C
CD 5
Chapter 66
Color buttons 24
Connecting
the audio cords 12
the video cords 10
Japan (jp)
1016
Korea, Republic of (kr)
1118
Malaysia (my)
1325
Mexico (mx)
1324
Netherlands (nl)
1412
New Zealand (nz)
1426
D
Norway (no)
1415
DIMMER 24
Disc Information 26
DISPLAY 24
Display
front panel display 59
Dolby Digital 14, 47, 66
Dolby Digital Plus 48, 66
Dolby TrueHD 48, 66
DTS 47, 66
“DTS Downmix” 47
DTS-HD 48, 66
DVD VIDEO 66
DVD+R 67
DVD+RW 67
DVD-R 67
DVD-RW 67
Pakistan (pk)
1611
Philippines (ph)
1608
Portugal (pt)
1620
Russian Federation (ru)
1821
Singapore (sg)
1907
Spain (es)
0519
Switzerland (ch)
0308
Sweden (se)
1905
Taiwan (tw)
2023
Thailand (th)
2008
United Kingdom (gb)
0702
United States of America
(us)
2119
“Language” 49
M
For details, see pages 50 and 52.
Chile (cl)
L
E
Easy Setup 18
F
Film based software 67
Front panel display 59
H
HDMI 11, 12, 18, 45, 47, 67
HDMI Control 11, 21, 52
I
Interlace format 67
70
69
1-17
“Memory” 28
“Movies” 32
MPEG 32
“Music” 36
O
“Options” 52
P
“Parental Control” 50
“Photos” 40
POP UP/MENU 25
Pro Logic 14, 47, 66
Progressive format 67
R
Region code 7
Remote 16, 17, 24
Resetting the Player 53
S
Searching 26, 34, 38, 42
“Setup” 22
Setup Displays 44
“Slideshow” 41
“Speaker Setup” 51
“Speakers” 12, 51
SUBTITLE 24
T
Title 67
Title List 22
TOP MENU 25
Troubleshooting 54
“TV Type” 45
U
Usable discs 5
V
Video based software 67
“Video Control” 28
“Video Setup” 45
MEMO
1-18E
BDP-S300/S301
SECTION 2
DISASSEMBLY AND REASSEMBLY
2-1.
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1-1. DISASSEMBLY FLOW
SET
2-1-2. UPPER CASE
(Page 2-1)
2-1-3. TRAY COVER ASSY
(Page 2-2)
2-1-5. MAIN BOARD
(Page 2-3)
2-1-6. AU-258 BOARD
(Page 2-3)
2-1-7. POWER BLOCK
(Page 2-4)
2-1-4. BD DRIVE (SERVICE USE)
(Page 2-2)
Note: Follow the disassembly procedure in the numerical order given.
2-1-2. UPPER CASE
3 upper case
1 tapping screw
2 three screws
1 tapping screw
2-1
2-1-3. TRAY COVER ASSY
1 Insert a clip in the hole of a drive
and open a tray.
4 tray cover assy
2
3 two claws
2-1-4. BD DRIVE (SERVICE USE)
5 two screws
5 two screws
8 BD drive
(service use)
6
7 connector
1 three claws
4 two screws
3 connector
1 three claws
2 front panel assy
2-2
2-1-5. MAIN BOARD
8 six screws (BV3)
4 connector
9 MAIN board
5 two connectors
1 harness (MBD-003)
6 four screws (BV3)
7 screw (P3)
2 connector
3 connector
2-1-6. AU-258 BOARD
3 four screws (BV3)
1 connector
5 AU-258 board
2 three screws (BV3)
2-3
2-1-7. POWER BLOCK
1 two connectors
2 connector
3 five screws (BV3)
4 power block
2-1-8. CIRCUIT BOARDS LOCATION
AU-258 board
MAIN board
FL-176 board
power block
FR-271 board
2-4
2-2.
REASSEMBLY
• This set can be assembled in the order shown below.
2-2-1. UPPER CASE
1 upper case
3 tapping screw
2 three screws
3 tapping screw
2-2-2. TRAY COVER ASSY
1 Insert a clip in the hole of a drive
and open a tray.
3 tray cover assy
2
4 two claws
2-5
2-2-3. BD DRIVE (SERVICE USE)
4 two screws
4 two screws
1 BD drive
(service use)
3
2 connector
8 three claws
5 two screws
6 connector
8 three claws
7 front panel assy
2-2-4. MAIN BOARD
2 six screws (BV3)
7 connector
1 MAIN board
6 two connectors
9 harness (MBD-003)
3 four screws (BV3)
4 screw (P3)
5 connector
8 connector
2-6
2-2-5. FL-176 BOARD, FR-271 BOARD
1 FL-176 board
2 two screws
5 flexible flat cable
(FLR-011)
4 two screws
3 FR-271 board
2-2-6. DC FAN
1 DC fan
3 connector
2 two screws
2-7
MEMO
2-8E
BDP-S300/S301
SECTION 3
BLOCK DIAGRAMS
3-1. MAIN BLOCK DIAGRAM
CN5701
MAIN BOARD
(DB-BMB102)
256MByte
128MByte
DDR 512Mbit
DDR 512Mbit
DRAM0
DRAM1
I2S
CN1802
BD-ROM
DRIVE
(BDV-102SO)
Parallel
ATAPI
DIGITAL OUT
Flash 512Mbit
OPTICAL
SPDIF1
COAXIAL
27MHz
VIDEO OUT
BD PLAYER
PROCESSOR
1K EEPROM
CVBS/Y/C
VIDEO
VIDEO
DRIVER
S VIDEO
I2C
COMPONENT
VIDEO OUT
Y
CN3501
LED_PON
FLDATA
FLCLK
FLSTB
LED_FL_OFF
LED_HDMI
LED_HD
LED_Blue
Y/Cb/Cr
7
27
29
26
21
20
19
5
VIDEO
BUFFER
PB
PR
FIP/LED
SPIDF0
I2S
HDMI
OUT
HDMI Tx
VOUT 24bit
FL/FR
(SEE PAGE 3-5)
KEY0
KEY1
3
23
MODEL 1
KEY
Sub
Microcomputer
I2C
4
CN6701
IR
FAN
1
05
3-1
3-2
XAMUTE
2
XMMUTE
1
ADATA5_1
27
ADATA5_2
26
ALRCK
22
ADATA5_0
21
ABCLK
20
MCLK
18
24
23
16
15
14
13
12
DAC_XCS_2
DAC_XRST
DAC_MDO
DAC_MDI
DAC_MC
DAC_XCS_1
DAC_MUT
AUDIO
(SEE PAGE 3-3)
BDP-S300/S301
3-2. AUDIO BLOCK DIAGRAM
AU-258 BOARD
(SEE PAGE 4-5)
ADATA5_2
ALRCK
ABCLK
MCLK
DAC_XCS_2
DAC_XRST
DAC_MDO
DAC_MDI
CN001
DAC_XCS_2
DAC_XCS_2
24
DAC_XRST
DAC_XRST
23
DAC_MDO
DAC_MDO
16
DAC_MDI
DAC_MDI
15
DAC_MC
DAC_MC
14
DAC_XCS_1
DAC_XCS_1 13
DAC_MUT
DAC_MUT
12
DAC_MC
DAC_MUT
ADATA5_1
3 DATA
ALRCK
1 LRCK
ABCLK
2 BICK
Aout L- 18
5 MCLK
MCLK
IC011
AMP
IC008
AUDIO
DAC
28 X-MS
DAC_XCS_2
6
DAC_XRST
–
6 X-RST
Aout L+ 17
5
+
7
DAC_MDO
25 MDO
3
26 MDI
27 MC
+
–
DAC_MDI
1
DAC_MC
2
DAC_MUT
4 MUTE
3 DATA
1 LRCK
2 BICK
5 MCLK
28 X-MS
Aout L- 18
IC010
AMP
IC007
AUDIO
DAC
6
–
6 X-RST
Aout L+ 17
5
+
3
+
–
7
25 MDO
26 MDI
27 MC
1
J001
2
CENTER
4 MUTE
WOOFER
Aout R+ 13
23 DZFL
Aout R+ 13
23 DZFL
22 DZFR
Q022
MUTE
22 DZFR
Q023
MUTE
L
Aout R- 12
Aout R- 12
MCLK
18
ABCLK
20
ADATA 5_0
MAIN
(SEE PAGE 3-2)
21
REAR
R
MCLK
ABCLK
Q020
MUTE
Q021
MUTE
ADATA 5_0
ALRCK
ALRCK
22
ADATA 5_2
ADATA 5_1
26
ADATA5_0
ADATA 5_2
ALRCK
ABCLK
ADATA 5_1
27
MCLK
10
9
5
4
1
2
Q009
SW
DAC_XCS_1
Q013
SW
DAC_XRST
DAC_MDO
IC004
GATE
XMMUTE
1
XAMUTE
2
Q001
MUTE
DRIVE
8
Q003
MUTE
DRIVE
Q017
SW
DAC_MDI
6
DAC_MC
3
DAC_MUT
L
3 DATA
1 LRCK
2 BICK
5 MCLK
28 X-MS
6 X-RST
Aout L- 18
IC009
AMP
IC006
AUDIO
DAC
J003
6
–
Aout L+ 17
5
+
L
7
25 MDO
R
26 MDI
3
27 MC
2
+
–
1
4 MUTE
Q018
MUTE
A out R+ 13
Q015
SW
Q014
SW
23 DZFL
22 DZFR
Q011
SW
FRONT
R
Aout R- 12
Q008
SW
Q007
SW
Q006
SW
05
3-3
3-4
Q019
MUTE
AUDIO
OUT
5.1CH
OUTPUT
BDP-S300/S301
3-3. FL/FR BLOCK DIAGRAM
FL-176 BOARD
(SEE PAGE 4-13)
IC100
FL DRIVE
7 DIN
SEG1
|
SEG16
14
|
29
ND100
FLUORESCENT
INDICATOR
TUBE
S(1)-(16)
8 CLK
9 STB
GRID2 41
|
|
GRID12 31
COM(1)-(11)
CN100
LED_PON
FR-271 BOARD
(SEE PAGE 4-17)
24
4
2
5
28
FLDATA
FLCLK
FLSTB
KEY 0
CN101
3
KEY0
CN600
9
S100
S600
A
1
KEY1
4
8
LED_PON
LED_1
LED_FL_OFF
MAIN
(SEE PAGE 3-1)
LED_HDMI
LED_HD
KEY1
S601
S602
S603
S604
S605
.
>
X
x
H
POWER 3
(SEE PAGE 3-11)
10
5
11
6
12
7
26
9
LED_FL_OFF
LED_HDMI
LED_HD
LED_Blue
LED_Blue
8
7
Q604
LED
DRIVE
D605
FL OFF
6
Q602
LED
DRIVE
D603
HDMI
5
Q603
LED
DRIVE
D604
HD
3
Q600
LED
DRIVE
+5V
MODEL 1
IC601
REMOTO
COMMANDER
RECEIVER
27
IR
30
2
IR
10
05
3-5
3-6
1 OUT
D601
(LED_Blue)
BDP-S300/S301
3-4. POWER 1 BLOCK DIAGRAM
POWER BLOCK
MAIN BOARD
(DB-BMB102)
CN202
SW+12V
6, 7
4
CN201
SW+12V (A)
11
SW-12V (A)
9
EV+6V
6
11
9
6
SW+1.5V
3, 4
6, 7
2
4
SW+5V
P_ON
~AC IN
2
3, 4
SWITCHING POWER SUPPLY CIRCUIT
SW+3V
1
1
CN102
CN6002
SW+12V
SW+3V
SW+5V
CN6051
SW+12V (A)
SW-12V (A)
EV+6V
SW+1.5V
P_ON
Sub
Microcomputer
FU101
CN5701
1, 2
AC
INLET
CN203
SW+12V
SW+5V
4
6
10
1
4
POWER 2
(SEE PAGE 3-9)
SW+12V
SW+5V
BD-ROM
DRIVE
(BDV-102SO)
CN3501
16
05
3-7
V–12A
V+12A
V+3D
3-8
V+5FL
POWER 3
(SEE PAGE 3-11)
BDP-S300/S301
3-5. POWER 2 BLOCK DIAGRAM
AU-258 BOARD
(SEE PAGE 4-5)
CN001
V-12A
POWER 1
(SEE PAGE 3-8)
V+12A
V+3D
Q002
B- SWITCH
4
6
IC001
-9V
REG.
Q004
B+ SWITCH
10
Q005
SWITCH
IC009
IC010
IC011
AMP
AMP
AMP
IC008
AUDIO
DAC
IC007
AUDIO
DAC
IC006
AUDIO
DAC
IC002
+9V
REG.
IC003
+5V
REG.
IC004
GATE
05
3-9
3-10
BDP-S300/S301
3-6. POWER 3 BLOCK DIAGRAM
FR-271 BOARD
FL-176 BOARD
(SEE PAGE 4-17)
(SEE PAGE 4-13)
POWER 1
(SEE PAGE 3-8)
CN101
CN100
V+5FL
CN600
8
15
V+5E
4
IC601
REMOTO
COMMANDER
RECEIVER
D601
(LED Blue)
D603
HDMI
IC100
FL DRIVE
VEE
30
D604
HD
D605
FL OFF
Q103
B+ SWITCH
F100
T100,
Q104,105
DC-DC
CONVERTER
F1
F2
Q101,102
SWITCHING
D100
Q100
SW
LED_PON
FL/FR
(SEE PAGE 3-5)
LED_1
05
3-11
3-12E
ND100
FLUORESCENT
INDICATOR
TUBE
BDP-S300/S301
SECTION 4
SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS
4-1. FRAME SCHEMATIC DIAGRAM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
JA4101
VIDEO OUT
VIDEO
S VIDEO
A
JA4201
COMPONENT
VIDEO OUT
AU-258
BOARD
D
1
1
XMMUTE
XAMUTE
2
2
XAMUTE
GND
3
3
GND
V-12A
4
4
V-12A
GND
5
5
GND
V+12A
6
6
V+12A
GND
7
7
GND
V+6E
8
8
V+6E
GND
9
9
GND
10
10
V+3D
GND
11
11
GND
DAC_MUT
12
12
DAC_MUT
E
13
13
27P
CN6002
V+3D
DAC_XCS_1
DAC_XCS_1
DAC_MC
14
14
DAC_MC
DAC_MDI
15
15
DAC_MDI
DAC_MDO
16
16
DAC_MDO
GND
17
17
GND
MCLK
18
18
MCLK
GND
19
19
GND
ABCLK
20
20
ABCLK
ADATA5_0
21
21
ADATA5_0
MAIN BOARD
(DB-BMB102)
1
CN202 8P
8P
GND
1
SW+12V
2
PM-138
HARNESS
1
GND
2
SW+12V
GND
3
3
GND
SW+5V
4
4
SW+5V
GND
5
5
GND
SW+3V
6
6
SW+3V
SW+3V
7
7
SW+3V
GND
8
8
GND
P_ON
1
1
P_ON
ALRCK
22
22
ALARCK
DAC_XRST
23
23
DAC_XRST
DAC_XCS_2
24
24
DAC_XCS_2
GND
2
2
GND
ADATA5_3
25
25
ADATA5_3
SW+1.5V
3
3
SW+1.5V
ADATA5_2
26
26
ADATA5_2
SW+1.5V
4
4
SW+1.5V
ADATA5_1
27
27
ADATA5_1
GND
5
5
GND
EV+6V
6
6
EV+6V
GND
7
7
GND
A GND
8
8
A GND
SW-12V (A)
9
9
SW-12V (A)
A GND
10
10
A GND
SW+12V (A)
11
11
SW+12V (A)
1
SW+12V(W)
2
GND
3
GND
4
SW+5V(W)
CN201 11P
CN6051 11P
B TO B
F
2
HARNESS
CN101 2P
CN5701
27P
XMMUTE
C
AC-259
1
1
R
CN001
2
2
R
PB
PR
V++
WOOFER
JA5501
COAXIAL
L
L
GND
R
CENTER
FAN
HDMI
OUT
3
Y
2P
L
B
AC-Inlet
CN4501
4
OPTICAL
FRONT
REAR
CN6701
AUDIO
OUT
L
DIGITAL OUT
JA5502
N
J001
5.1CH OUTPUT
J003
PM-139
HARNESS
PBD-003
G
HARNESS
CN203
POWER
BLOCK
V+13SW
LED_Blue
MODEL1
KEY0
5
4
3
IR
LED_P ON
6
GND
GND
1
LED_IOE
7
2
FLDC+
GND
8
FLDC-
9
GND
11
10
FL-29V
12
LED_HD
19
13
LED_HDMI
20
GND
LED_FL_OFF
21
14
LED_LAN
22
V+5FL
KEY1
23
GND
LED_DDHD
24
15
GND
25
GND
FLSTB
26
16
FLDATA
27
18
19
20
21
22
23
24
25
26
27
28
29
30
GND
FLDC-
GND
FLDC+
LED_IOE
GND
LED_P ON
V+13SW
LED_Blue
MODEL1
KEY0
GND
IR
17
13
GND
FL-29V
12
LED_HD
16
11
LED_HDMI
GND
10
LED_FL_OFF
15
9
LED_LAN
14
8
KEY1
GND
7
V+5FL
6
5
FLSTB
GND
4
LED_DDHD
3
2
GND
FLCLK
FLDATA
GND
CN100 30P
1
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
FFC
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1
2
3
GND
SW+12V(W)
4
GND
4P
SW+5V(W)
17
GND
28
FML-003
MBD-003 HARNESS
J
18
FLCLK
29
CN3501
GND
40
39
38
36
37
35
34
33
32
31
30
29
28
27
26
25
22
24
21
23
20
19
18
17
16
15
14
13
12
11
10
8
9
7
6
5
4
3
2
1
30
CN1802 40P
30P
H
I
FR-271
BOARD
CN101 11P
BD-ROM DRIVE
(BDV-102SO)
K
L
M
4P
FL-176 BOARD
CN600 11P
GND
1
11
GND
IR
2
10
IR
KEY0
3
9
KEY0
KEY1
4
8
KEY1
LED_FL_OFF
5
7
LED_FL_OFF
LED_HDMI
6
6
LED_HDMI
LED_HD
7
5
LED_HD
V+5E
8
4
V+5E
LED_Blue
9
3
LED_Blue
GND
10
2
GND
GND
11
1
GND
FLR-011
FFC
4-2
05
4-1
FRAME SCHEMATIC DIAGRAM
BDP-S300/S301
THIS NOTE IS COMMON FOR WIRING BOARDS AND
SCHEMATIC DIAGRAMS
(In addition to this, the necessary note is printed in each block)
(For printed wiring boards)
• b: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated)
• Through hole is omitted.
• Circled numbers refer to waveforms.
• There are few cases that the part printed on diagram
isn’t mounted in this model.
• Chip parts.
Transistor
Diode
6 5 4 4 5 6
C
B
E
4 5
1
3
2
1 2 3 3 2 1 3 2 1 5 4 3
2
3
1 2
3
1 2
1
(For schematic diagrams)
• All capacitors are in µF unless otherwise noted. pF : µµF.
50V or less are not indicated except for electrolytics and tantalums.
• All resistors are in ohms, 1/4 W (Chip resistors : 1 /10 W) un-less
otherwise specified.
kΩ=1000Ω, MΩ=1000kΩ.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor, because it is damaged by the heat.
• All variable and adjustable resistors have characteristic curve B,
unless otherwise noted.
• 2: nonflammable resistor
• 5: fusible resistor
• C : panel designation
•
f : internal component.
• C : adjustment for repair.
• U : B+ Line
• V : B– Line
• Circled numbers refer to waveforms.
• Voltages are dc between measurement point.
• Readings are taken with a color-bar signals on Blu-ray disc.
• Readings are taken with a digital multimeter (DC 10MΩ).
• Voltage variations may be noted due to normal production tolerances.
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce por tant le numéro
spécifié.
When indicating parts by reference number, please include
the board name.
NOTE
4-3
4-4
BDP-S300/S301
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
AU-258 (ANALOG AUDIO) SCHEMATIC DIAGRAM
– Ref. No. : AU-258 board; 1,000 series –
: Uses unleaded solder. • See page 2-4 for circuit boards location.
4
3
6
5
7
AU-258 BOARD
10
11
14
13
12
15
16
17
18
BB+
R103
R081
1.8k
0.5%
470p
R084
12
13
14
B+
B+
B+
B+
B+
C020
47
25V
C034
XX
C058
10
50V
C043
0.1
C035
AOUTRAOUTL+
AOUTR+
AGND C
VCOM
11
12
13
14
2.5
1.4
5.1
B+
VCC L
VCC F
3.3
DZFL
MSEL
3.3
B+
0
1.7
MDI
MC
1.7
R134
680
0.5%
R095
1.8k
0.5%
C116
0.1
0
9
VCC
6
7
8
4
3
2
1
R079 XX
B+
C061
10
50V
C064
2.2
C054
0.1
100
R080
R149
47k
0.5%
C123
0.1
R157
4.7k
R163
100k
C143
100p
Q022
2SD2704K-T146
D015
XX
MUTE
R150
47k
0.5%
C134
0.1
R096
1.8k
0.5% B+
R035
10k
0
Q023
2SD2704K-T146
MUTE
R158
4.7k
0.7
R142
470
0.5%
C144
100p
D016
XX
R169
470
0.5%
0
C129
47
63V
C108
470p
C080
1500p
C078
XX
C130
XX
B-
R135
680
0.5%
11.8
B+
B+
9
0
0.9
VCC
OUT
-IN
0.9
+IN
-IN
OUT
+IN
0
0.9
-IN
OUT
C133
0.1
+IN
AGND R
AOUTL-
10
R168
470
0.5%
B+
5
R132
3.3k
0.5%
C107
470p
R141
470
0.5%
0.7
C113
XX
C106
470p
R133
3.3k
0.5%
C128
47
63V
C105 470p
5.1
VCC R
9
1.4
AGND F
8
AGND L
DGND
7
R075 XX
SWITCH
C112
XX
R131
680
0.5%
VCC C
1.4
1.4
5.1
3.3
3.3
6
DZFR
5
MDO
4
C048
0.1
Q008
MSB709-RT1
+IN
R130
680
0.5%
C079
1500p
C077
XX
15
VDD
16
R065 XX
-9
R031
10k
C147
1
17
C044 XX
R028
10k
18
3
R071 XX
M
19
C045 47 25V
11.8
20
2
R059
XX
B+
21
X_RST
22
MCLK
23
MUTE
24
5.1
0
0
25
1
1.7
L
26
DATA
B+
AUDIO DAC
X_MS
IC008
PCM1791ADBR
8
B+
IC008
27
BICK
28
LRCK
9
C005
0.1
AMP
IC011
NJM4580MD-(TE2)
R129
3.3k
0.5%
B+
XX
0
1A
VCC
R058
C060
0.1
R094
1.8k
0.5%
3.3
1B
4B
XX
3.3
4A
0
0
0
4Y
3B
3Y
3A
10
3.3
11
3.3
12
3.3
13
14
R176
0
R177
0
GATE
IC004
SN74LVC08APWR
XX
C053
0.1
C047
0.1
R093
1.8k
0.5%
1.7
1Y
0
2A
0
2B
0
3.3
2Y
3.3
GND
3.3
7
6
5
4
3
2
1
K
XX
R064
IC011
C046
39
16V
C024
XX
R070
C122
47
63V
B+
J
R074
0.9
C063
2.2
B+
IC004
R167
470
0.5%
0.1
C052
47 25V
D014
XX
9
C017
0.1
D004
XX
R078
100
C023
XX
C142
100p
Q021
2SD2704K-T146
MUTE
R140
470
0.5%
C100
XX
R118
3.3k
0.5%
R088
1.8k
0.5%
VCC
C010
0.1
B+
B+
R073
XX
R156
4.7k
0.7
C127
0.1
C088
470p
OUT
O
R146
47k
0.5%
R117
680
0.5%
C074
1500p
C068
XX
+5V REG.
G
1
0
R087
1.8k
0.5%
R063 XX
R069 XX
5.1
I
2
WOOFER
B-
0
12.6
3
D013
XX
Q020
2SD2704K-T146
MUTE
R145
47k
0.5%
C118
0.1
XX
B+
D001
DAN202K-T-146
4
-9.1
2.5
1.4
VCC L
5.1
VCC F
MDO
MDI
DZFL
3.3
R116
680
0.5%
C141
100p
CENTER
C115
IC003
REAR
0.7
R
R162
100k
R155
4.7k
8
OUT
11
L
0
0
10
7
-IN
VCOM
9
6
+IN
AOUTR+
AGND C
8
VCC C
AOUTRAOUTL+
7
1.4
6
AGND L
5
R053 XX
R007 22
FRONT
AMP
IC010
-VCC
5.1
1.4
1.4
5.1
3.3
3.3
4
DZFR
3
MSEL
AGND R
AOUTL-
15
VCC R
16
AGND F
17
DGND
18
5
0.9
R008
XX
IC003
NJM78M05DL1A-TE1
R175
0
19
2
R057 XX
B+
20
L
R
R165
470
0.5%
IC010
C087
470p
IC002
NJM78M09DL1A(TE1)
L001
XX
I
21
VDD
22
X_RST
23
5.1
0
1.7
0
24
1
B+
-9
25
3.3
I
Q004
2SB1561T100Q
B+ SWITCH
26
MCLK
12.6
B+
12.7
G
12.8
27
1.7
R012
10k
H
AUDIO DAC
MUTE
+9V REG.
28
IC007
C019
470
16V
C016
0.1
0
C004
47
25V
IC002
R115
3.3k
0.5%
J001
B+
C098
XX
C086
470p
D012
XX
C126
0.1
C085
470p
R112
680
0.5%
NJM4580MD-(TE2)
DATA
12
B+
C009
0.1
C007
47
25V
0
R030
XX
R019
10k
C018
470
16V
C015
0.1
MC
-14.4
C008
0.1
C006
47
25V
3.3
R024
220k
1.7
R017
10k
O
G
R114
3.3k
0.5%
X_MS
-9V REG.
BICK
IC001
-13.8
XX
C140
100p
R173
470
0.5%
0
R052
LRCK
-14.4
R023
100k
B+
-13.8
Q005
MSD601-RST1
SWITCH
D002
1SS355TE-17
R011
10k
R139
470
0.5%
C121
47
63V
C097
XX
R113
680
0.5%
D011
XX
C139
100p
C083
XX
C095
470p
C073
1500p
C067
XX
R056 XX
D003
1SS355TE-17
C003
47
25V
O
COM
R166
470
0.5%
C120
47
63V
R111
3.3k
0.5%
R085
1.8k
0.5%
B-
-9.1
I
0
R138
470
0.5%
R171
470
0.5%
0.9
-14.5
R154
4.7k
R108
680
0.5%
C109
0.1
R107
3.3k
0.5%
R086
1.8k
0.5%
IC007
PCM1791ADBR
B-
-14.4
-VCC
-9.1
C057
0.1
R068
XX
1.7
-14.4
C096
XX
R110
3.3k
0.5%
0.9
C050
0.1
C042
0.1
R062 XX
B-
B+
0.9
C037
39
16V
IC001
NJM79M09DL1A-TE1
MUTE
0.7
B+
R002
100
C022
XX
F
AMP
C125
0.1
D008
XX
Q019
2SD2704K-T146
IC009
C084
470p
C072
1500p
C066
XX
0.5%
1.8k 0.5%
L002
XX
R013
XX
Q002
2SD1781K-T146-QR
B- SWITCH
0.9
VCOM
2.5
1.4
B+
R077 100
R083 1.8k
AUDIO OUT
R
C138
100p
R109
680
0.5%
C062
2.2
L
D007
XX
C137
100p
IC009
NJM4580MD-(TE2)
C056
10
50V
J003
R170
470
0.5%
R144
47k
0.5%
B-
B+
XX
XX
22
XX
1
0.9
AOUTR+
AGND C
R022
0
B-
C055
0.1
5.1
AOUTRAOUTL+
VCC L
5.1
VCC F
DZFL
R072 XX
R061 XX
R003
R006
R004
R016
VCC C
AGND R
AOUTL-
14
B+
E
1.4
VCC R
13
1.4
AGND F
12
AGND L
DGND
11
2
-IN
100
1.4
0
5.1
0
5.1
VDD
10
DZFR
X_RST
9
R067 XX
R178
C049
0.1
C040
0.1
C036
39
16V
0
0
8
3
OUT
27
7
4
-IN
26
ADATA5_1
6
8
+IN
25
ADATA5_2
5
7
-VCC
24
ADATA5_3
4
6
0.9
DAC_XCS_2
3
R161
100k
R143
47k
0.5%
C117
0.1
5
-9.1
23
2
R153
4.7k
0.7
B-
DAC_XRST
1
R055 XX
R018
22
15
0.1
22
16
XX
21
17
C110
20
ALRCK
18
C099
ABCLK
ADATA5_0
C094
XX
B-
19
0
R106
3.3k
0.5%
XX
18
GND
19
Q018
2SD2704K-T146
MUTE
C124
0.1
XX
MCLK
20
C032
17
R051 XX
R009
22
21
C051 0.1
16
GND
AUDIO DAC
R015
XX
R001
XX
22
C033 47 25V
D
DAC_MDO
R014
XX
23
3.3
15
24
3.3
14
25
B+
13
DAC_MC
DAC_MDI
26
C041 0.1
DAC_XCS_1
IC006
27
MSEL
12
B+
B+
MCLK
DAC_MUT
28
B+
1.7
11
IC006
PCM1791ADBR
9
10
GND
1.7
GND
V+3D
MDO
8
B+
MAIN
BOARD
(DB-BMB102)
CN5701
R137
470
0.5%
R105
680
0.5%
C082
470p
MUTE
V+6E
XX
0
7
XX
MC
6
GND
XX
R054
R050
3.3
V+12A
R060
1.7
B-
B+
MDI
5
DATA
4
GND
XX
1.2
V-12A
R066
X_MS
3
BICK
GND
B+
LRCK
2
1.7
1
25
C119
47
63V
27P
B+
C
R104
680
0.5%
C071
1500p
C065
XX
R082
1.8k
0.5%
XAMUTE
24
C081
NO MARK:REC/PB MODE
XMMUTE
23
3.3k 0.5%
C093
-REF.NO.:1,000 SERIESXX MARK:NO MOUNT
B
22
21
B+
AUDIO
CN001
20
19
B-
C114
A
9
8
5.1CH OUTPUT
2
XX
1
0.9
•
• See page 4-7 for printed wiring board.
R136
3.3k
0.5%
C021 XX
C027
XX
0
C030
XX
C038
XX
R089
XX
0.1
R029
47k
Q014
MUN2213T1
SWITCH
R090
XX
R046 XX
R172
XX
C135
XX
J002
XX
Q024
R040 XX
XX
R159
XX
R164
XX
(Center)
MSB709-RT1
C145
XX
SWITCH
11.8
DGND
AGND F
VCC R
5
6
7
8
9
10
11
12
13
6
7
8
-IN
OUT
VCC
VCC C
5
D010
XX
IC012
XX
R123
XX
OUT
VDD
4
15
-IN
X_RST
3
16
VCOM
MCLK
2
17
AOUTR+
AGND C
MUTE
1
18
AOUTRAOUTL+
DATA
VCC L
19
BICK
DZFL
20
AGND R
AOUTL-
21
AGND L
22
VCC F
23
MSEL
MDO
24
DZFR
25
MDI
26
LRCK
IC005
XX
Q015
MUN2213T1
SWITCH
27
X_MS
28
MC
0
0.1
P
D009
XX
(Sub)
0
3.3
R021
47k
R147
XX
R036
10k
Q007
DTC124TKA-T146
SWITCH
Q001
MUN2213T1
MUTE DRIVE
C101
XX
R122
XX
R042 XX
Q009
11.1
0.1
3
R032
10k
C148
1
R020
10k
O
11.8
C089
XX
C075
XX
R044 XX
11.8
C131
XX
R121
XX
C069
XX
+IN
C002
1000
16V
+IN
3.1
11.8
-VCC
Q003
MUN2213T1
MUTE DRIVE
C028
XX
N
11.8
Q006
DTC124TKA-T146
SWITCH
0.1
4
3
2
1
C146
XX
14
11.8
Q013
C149
1
R034
10k
MSB709-RT1
R010 XX
R038
10k
0
Q011
DTC124TKA-T146
SWITCH
Q
R027
XX
SWITCH
11.1
Q017
MUN2213T1
SWITCH
R124
XX
C090
XX
C091
XX
R091
XX
R047 XX
R048
3.3
R126
XX
XX
R005
XX
R092
XX
0.1
C070
XX
C076
XX
C103
XX
R152
XX
R127
XX
R128
XX
Q12
XX
C150
XX
R151
XX
C111
XX
R041 XX
R043 XX
R045 XX
0
C102
XX
Q025
XX
R160
XX
C136
XX
C092
XX
C104
XX
R174
XX
R148
XX
C132
XX
R033
XX
SIGNAL PATH
R049
100
R037
XX
R
AUDIO
SIGNAL
Q016
XX
Q010
XX
05
R039
XX
C039
XX
C025
XX
R125
3.3k
PB
C029 C026
XX
XX
4-5
C059
XX
C031
XX
4-6
ANALOG AUDIO
AU-258
BDP-S300/S301
AU-258 BOARD (SIDE A)
IC004
IC006
IC007
IC008
H-11
C-7
D-7
F-7
Q006
Q007
Q008
Q009
Q011
Q013
G-11
G-11
I-11
I-11
G-12
H-12
AU-258 (ANALOG AUDIO) PRINTED WIRING BOARD
– Ref. No. : AU-258 board; 1,000 series –
There are a few cases that the part isn't mounted in this model is printed on this diagram.
: Uses unleaded solder. • See page 2-4 for circuit boards location.
AU-258 BOARD (SIDE A)
R039
A
R016
R007
R050
+
C036
C040
C062
C055
R154
C
15
1
IC006
R003
R002
R005
C022
14
R004
C051
R178
R009
B
R015
R051
R010
R022
R055
R027
R061
R014
C041
R001
R067
R077
R072
R006
R018
28
R054
R060
R161
R066
C049
R078
R073
R063
R030
R069
R153
C043
R057
R053
C052
D
R052
+
IC007
C037
15
1
C042
C063
R162
C057
R156
C023
14
R056
28
R062
R068
R155
C050
R079
R158
C048
R071
R075
R080
R065
R059
C054
IC008
15
R058
+
R064
28
R070
R074
R043
Q011
R041
C031
R177
R176
R040
Q006
Q007
ECB
EC B
ECB
C150
C149
+
R046
C030
14
8
IC004
1
7
C147
R031
C148
R036
R044
R035
R042
28
C005
IC005
C027
15
1
C028
C059
H
14
C038
R159
C021
R032
BC E
R045
Q010
C029
R164
R047
R049
R048
G
R034
EC B
R037
R160
C053
R038
C064
1
R157
C060
F
14
C046
C024
R163
C047
E
R033
ECB
Q012
Q013
I
05
ANALOG AUDIO
AU-258
1
2
3
4-7
4
5
6
7
8
9
10
4-8
ECB
ECB
Q008
Q009
11
12
1-873-157- 11
BDP-S300/S301
AU-258 BOARD (SIDE B)
1
27
CN001
A
R123
R122
C140
C139
D014 D011
J001
R
C141
C144
C143
IC012
C145
C
E
R147
8
C089
G
R172
B
H
C131
C135
1-873-157- 11
R121
I
05
12
11
10
9
4-9
8
7
6
5
4
3
2
4-10
L
CENTER
AU-258 BOARD (SIDE B)
Q024
R151
1
F
J002
ECB
R152
R141
C132
Q025
C146
R174
C133
C112
C128
5.1CH OUTPUT
WOOFER
D009 D010
E
REAR
E
D015 D016 D013
R165
C
R149
B
C136
5
L
D
R168
C123
Q022
R148
4
R169
R150
C134
ECB
R142
8
C104
C103
C102 C111
C091
C090
C070
C076
R125
R126
C142
R171
R146
R145
C126
E
C101
R089
C075
R090
R124
C039
R167
C127
C118
C115
C129
R127
C069
C025
R091
R173
R144
R143
C124
C093
C100
B
C
Q023
1
C105
C092
D012
R170
C125
C117
C094
C099
C110
C098
C114
C116
5
FRONT
R139
IC011
C113
C106
R128
R092
R029
BCE
4
C130
C026
B CE
C108
R129
C002
Q014
C097
C073
R093
Q015
ECB
C
Q020
C121
R135
R130
R131
C138
C096
C083
C107
C078
C080
R133
C079
R175
BCE
8
C085
R134
C077
R094
R028
BCE
5
Q021
R140
IC010
R136
R132
C061
ECB
R020
R021
Q017
C095
C086
R114
C020
R095
O
Q003
C122
1
R112
R096
C044
I
4
C045
IC003
L
R
Q018
BC E
C088
R111
D001
Q016
C119
R117
R113
C067
L001
C017
R085
C010
C087
C074
R115
C019
C058
R116
O
R086
D004
C068
R118
Q019
ECB
R137
C034
D003
IC002
I
Q004
C016
C007
R008
C009
C
ECB
8
C081
R088
R012
Q001
R138
R103
R087
B
5
R104
R105
1
C035
C004
E
C082
R106
C071
R081
4
IC009
C065
L002
O
R082
C018
I
D002
R023
IC001
C015
C006
ECB
R024
BC E
Q005
R013
C003
R017
R019
C008
Q002
R011
R108
AUDIO OUT
B
R109
C109
C056
C084
C120
R107
C032
C072
R083
C066
R084
R
J003
R110
C137
R166
C033
D007 D008
2
26
1
D001
D002
D003
G-11
C-10
D-10
IC001
IC002
IC003
IC009
IC010
IC011
C-10
D-11
E-11
B-4
D-4
F-4
Q001
Q002
Q003
Q004
Q005
Q014
Q015
Q017
Q018
Q019
Q020
Q021
Q022
Q023
G-12
B-11
G-11
D-12
C-12
H-11
H-11
H-12
C-2
C-2
E-2
D-2
F-2
F-2
ANALOG AUDIO
AU-258
BDP-S300/S301
FL-176 (FL/LED) PRINTED WIRING BOARD
– Ref. No. : FL-176 board; 2,000 series –
There are a few cases that the part isn't mounted in this model is printed on this diagram.
: Uses unleaded solder. • See page 2-4 for circuit boards location.
FL-176 BOARD
FB003
S100
R116
R118
R123
R122
BCE
R103
4
R105
R121
C124
JW104
R101
F100
R110
T100
JW116
C113
C114
42
4
C104
2 1
Q105
C118
C119
D105
JL107
JW111
Q104
D
05
8
L102
ECB
Q101
Q102
E CB
1
Q103
D103
ECB
44
R104
R124
D100 Q100
JL106
45
R125
C108
2
23 2
JW114
C116
D104
D102
D101
JL105
R102
R119
R120
JW105
C102
C117
JW113
C120
ND100
R126
5
R112
12
IC100
R113
JW115
JW110
C111
JW102
JW117
JW109
C101
JL108
11
JL101
C112
JL102
JW121
1
R109
33 34
R117
C123
JW112
CN101
R106
C106
JL104
R111
R107
R115
JL109
C109 JW101
C110
C107
2
C
C115
JL103
R114
R100
1
44
JW108
JW120
R108
10
11
JW119
JW107
JW106
JL100
29
30
CN100
2
JW122
JW118
JW103
1
C100
L101
A
C105
FB004
B
1
FB001
FB002
E CB
1
2
3
4
5
6
7
8
9
10
1-873-142- 11
FL-176 BOARD
FL/LED
FL-176
4-11
4-12
CN101
C-1
D100
D101
D102
D103
D104
D105
B-9
C-9
C-9
C-9
C-8
C-7
IC100
C-4
Q100
Q101
Q102
Q103
Q104
Q105
B-9
B-9
B-9
B-10
D-10
D-10
BDP-S300/S301
FL-176 (FL/LED) SCHEMATIC DIAGRAM • See page 4-11 for printed wiring board.
– Ref. No. : FL-176 board; 2,000 series –
1
3
2
4
5
6
7
9
8
12
11
14
13
15
16
17
ND100
FLUORESCENT INDICATOR TUBE
FL-176 BOARD
A
10
INDICATOR DRIVE
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
C104
F2
F2
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
NC
NC
NC
NC
NC
NC
NC
NC
NC
9
NC
8
NC
6G
7
NC
5G
6
11G
4G
5
10G
3G
4
9G
2G
2
8G
1G
1
7G
F1
NO MARK:REC/PB MODE
F1
-REF.NO.:2,000 SERIESXX MARK:NO MOUNT
44 45
XX
S[1]
S[2]
S[3]
S[4]
S[5]
S[6]
S[7]
S[8]
S[9]
S[10]
S[11]
S[12]
B+
C
B+
B+
R117
10k
JL104
COM[2]
COM[3]
COM[4]
COM[5]
COM[6]
COM[7]
COM[8]
-21.4
-21.4
-21.4
-21.4
-21.4
-21.4
-21.4
VDD
GRID1
GRID2
GRID3
GRID4
GRID5
GRID6
GRID7
GRID8
GRID9
-15.4
-17.4
-15.4
S[7]
S[8]
S[9]
SEG9
-17.2
S[6]
SEG8
-15.4
S[5]
SEG7
-23.1
S[4]
SEG6
-23.1
S[3]
SEG5
-21.2
S[2]
SEG4
-21.2
S[1]
SEG3
SEG10
SEG2
KEY2
SEG1
SEG11
22
24
KEY1
21
23
LED_P ON
SEG12
20
22
GND
STB
19
21
LED_ICE
SEG13
CLK
18
20
FLDC+
SEG14
17
19
DIN
15
18
GND
SEG15
IC100
PT6315
16
17
GND
FLDC-
SEG16
FL DRIVE
14
FL-29V
IC100
13
16
DOUT
12
GND
C110
XX
C107
XX
CSC
4.9
15
5
VSS
4.9
C106
XX
B+
JL101
VEE
10 11
V+5FL
14
47
LED4
VDD
R106
GRID12
33 32 31 30 29 28 27 26 25 24 23
13
5
34
GND
5
JL102
35
R107 47
36
12
GRID11
LED3
9
11
LED_HD
GRID10
LED2
8
LED_HDMI
JL103
37
R108
47
LED1
7
-21.4
COM[9]
-21.4
COM[10]
-21.4
COM[11]
C123
0.01
R116
XX
R118
8.2k
R123
8.2k
R119
12k
R124
12k
R125
12k
S100
C124
0.01
/
-23.6
-23.1
S[16]
-19.3
S[15]
-17.3
S[14]
-23.1
S[13]
-23.1
S[12]
-23.1
S[11]
-13.4
S[10]
JL109
V+13SW
25
LED_Blue
26
MODEL1
27
KEY0
28
GND
29
1
GND
IR
30
2
IR
3
KEY0
4
KEY1
5
LED_FL_OFF
6
LED_HDMI
7
LED_HD
8
V+5E
9
LED_Blue
C116
XX
B+
G
2.8
JL100
38
9
10
39
LED_LAN
LED_FL OFF
GND
MAIN BOARD
(DB-BMB102)
CN3501
R111
100k
8
40
KYE1
41
7
6
6
5
GND
LED_DDHD
R114
XX
4
5
3
4
R126
33k
2
3
FLSTB
42
2
GND
43
FLCLK
FLDATA
R115
XX
C115
0.1
44
1
C112
XX
C111
XX
R113
10k
1
E
GND
C109
XX
C102
0.1
C101
100
16V
C100
XX
30P
VSS
CN100
R121
1.8k
B+
COM[1]
B+
-21.4
B+
R109
0
D
R120
10k
R122
2.2k
R100
0
B+
F
S[13]
S[14]
S[15]
S[16]
COM[11]
COM[10]
COM[9]
COM[8]
COM[7]
COM[6]
COM[5]
COM[4]
COM[3]
COM[2]
COM[1]
B
CN101 11P
H
FR-271 BOARD
CN600
(SEE PAGE 4-17)
B+
4
2
1
R103
22k
R110
1.8k
Q103
RSS040P03FD5TB
B+ SWITCH
R104
22k
C105
0.022
2
10
3
1
C113
0.01
C108
100
16V
4
7
D101
1SS355TE-17
C114
XX
D102
1SS355TE-17
JL106
C119
0.1
0
2.7
0
D100
DAN202UT106
2.4
0
FB002
FB003
K
FB004
-0.4
Q100
DTC114YKA-T146
SWITCH
5
8
6
9
JL107
2.7
Q102
FB001
GND
JL105
D104
1SS355TE-17
4.8
-0.4
R105
22k
J
Q104
2SC2411K-T-146-CR
DC-DC CONVERTER
4.9
8
4.9
R101
10k
D103
1SS355TE-17
4.9
7
4.9
L101
XX
GND
11
4.9
6
4.9
10
D105
MM3Z5V6ST1
B+
L102
47uH
5
4.9
3
B+
I
0
R102
0
F100
0.5A
32V
DTC124EKA-T146
SWITCHING
0
Q105
2SC2411K-T-146-CR
DC-DC CONVERTER
T100
DC-DC CONVERTER
TRANSFORMER
Q101
DTC124EKA-T146
SWITCHING
C117
22
C118
0.1
R112
27k
C120
0.1
JL108
05
4-13
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce por tant le numéro
spécifié.
4-14
FL/LED
FL-176
BDP-S300/S301
FR-271 (SW/IR, INPUT/LED) PRINTED WIRING BOARD
– Ref. No. : FR-271 board; 2,000 series –
There are a few cases that the part isn't mounted in this model is printed on this diagram.
: Uses unleaded solder. • See page 2-4 for circuit boards location.
FR-271 BOARD
A
A
R611
R607
S604
S602
S601
R609
R606
R608
X
G
JW607
x
.
S605
R610
S603
R612
S600
B
R630
ECB
JL602
1
2
VCC O
C605
JW605
JL605
C603
JW610
Q600
R604
JL601
E CB
D601
JL603
(LED Blue)
R631
JW611
D
CN600
C600
IC601
10
HDMI
11
D603
HD
JW606
D604
FL OFF
C602
D605
R602
C
JL600
JW602
ECB
JW601
JL606
JW609
ECB
R614
Q602
JW603
R615
Q603
R616
JW604
Q604
R629
R628
JL607
JW608
>
D606
1-873-143- 11
1
05
2
3
4
5
6
7
8
9
FR-271 BOARD
CN600
C-11
D601
D603
D604
D605
D-11
C-5
C-4
C-2
IC601
C-8
Q600
Q602
Q603
Q604
D-10
C-5
C-3
C-2
SW/IR, INPUT/LED
FR-271
4-15
4-16
10
11
BDP-S300/S301
FR-271 (SW/IR, INPUT/LED) SCHEMATIC DIAGRAM
– Ref. No. : FR-271 board; 2,000 series –
1
• See page 4-15 for printed wiring board.
3
2
4
5
6
8
7
FR-271 BOARD
A
LED DRIVE, FUNCTION KEY
-REF.NO.:2,000 SERIESXX MARK:NO MOUNT
NO MARK:REC/PB MODE
S600
CN600
B
R606
1.8k
11P
GND
1
GND
2
LED_Blue
3
V+5E
4
LED_HD
5
LED_HDMI
6
LED_FL_OFF
7
IC601
B+
FL-176
BOARD
CN101
(SEE PAGE 4-14)
REMOTE COMMANDER RECEIVER
JL601
IC601
GP1UM28XK0SF
B+
4.9
VCC
4.9
C
R609
2.2k
JL602
KEY1
8
OUT
KEY0
9
GND
IR
10
GND
11
R607
8.2k
R610
8.2k
R608
12k
R611
12k
R612
12k
JL603
R602
47
B+
C600
XX
JL600
C602
0.1
B+
S602
S603
S604
S605
C603
XX
C605
47
16V
S601
JL607
JL606
B+
JL605
D
B+
B+
R604
82
R631
XX
B+
R615
330
R614
330
R616
330
(LED Blue)
HDMI
D601
NSPW-310BST-A0S
D606
XX
4
0
R628
XX
0
Q600
MUN2211T1
LED DRIVE
R629
XX
D605
SLI-343YC
D604
SLI-343YC
E
3.1
FL OFF
HD
D603
SLI-343YC
4
Q602
MUN2211T1
LED DRIVE
0
R630
XX
4
Q603
MUN2211T1
LED DRIVE
0
Q604
MUN2211T1
LED DRIVE
05
4-17
4-18
SW/IR, INPUT/LED
FR-271
BDP-S300/S301
MEMO
4-20E
Main Set, Power Supply Section
Flowchart No.1
Power does not turn on
Does the power turn on by the Power button of
remote controller and main set?
No
For the remote controller, see Operation and Display section, Flowchart No.1
“Disabled operation from remote controller”
Yes
No
Is the fuse in each line on power board OK?
FU101 on primary side
CN6051 6pin 6V
5-1
6V P301 3V P401
12V P202 1.5V P501
5V P302
Yes
Yes
Check/replace the power harnesses (PM-138, PM-139)
If not improved by replacement, replace the Power board
Is 5V supplied to connector CN100 15pin on FL board?
No
No
Replace the Main board and Power Board
SECTION 5
TROUBLESHOOTING
Is the power supplied to connector CN6051 on
main board?
For the Power button of main set, see Operation and Display section,
Flowchart No.2 “Disabled key operation”
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
Yes
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
BDP-S300/S301
Main Set, Power Supply Section
Flowchart No.2
The set does not start normally by power ON
Is about 5V supplied to connector CN100 28pin
(=Key 0) on FL board when Power key on the set
is pressed?
No
Is the symptom improved by replacingthe Power switch?
No
See FL board flowchart 1
Yes
Yes
Is the error code “∗∗∗ ERR” displayed on FL tube?
Replace the Power switch
Displayed
Replace the Main board
Not displayed
Is 5V supplied to connector CN6051 1pin on main board
by power ON?
No
Go to Flowchart No.1 “Power does not turn on”
5-2
Yes
Is respective voltages supplied to connector CN6021 &
CN6051 on main board?
CN6002 6pin 3V
CN6002 4pin 5V
CN6002 2pin 12V
CN6051 11pin 12.5V
CN6051 9pin -15V
CN6051 3pin 1.5V
No
Is the fuse in each line on power board OK?
3V
5V
12V
12.5V
-15V
1.5V
P401
P302
P202
P401
P601
P501
Yes
Yes
Replace the Main Board
Check/replace the power harness (PM-138, PM-139).
If not improved by replacement, replace the Power board.
No
Replace the Power board.
If not improved by replacement, replace the Main board.
Main Set, Power Supply Section
Flowchart No.3
Drive does not operate normally
Are 12V and 5V supplied to the drive?
No
Is P303 fuse (5V) on power board OK?
Yes
Yes
Check/replace the power harnesses (PBD-003).
If not improved by replacement, replace the Power board
Is ATAPI reset?
Is connector CN1802 1pin on main board “H”?
5-3
Check/replace the drive flexible cable (MBD-003).
If not improved by replacement, replace the Drive.
If not still improved by replacement, replace the Main board.
No
Replace the Main board
No
Replace the power board. If the fuse blows again,
5V system in drive is faulty.
Replace the drive
Main Set, Power Supply Section
Flowchart No.4
Video is not displayed normall
Is the display of FL tube/LED normal?
Yes
Replace the Main board
No
Go to Flowchart No.2
“The set does not start normally by power ON”
5-4
Main Set, Power Supply Section
Flowchart No.5
Audio is not heard normally
No
Go to Flowchart No.2 ‘‘The set does not start normally
by Power on’’
Display on FL tube/LED normal?
Yes
No
Is the audio signal present to digital output
(HDMI/Coax/SPDIF) ?
Replace the Main board
Yes
5-5
Are audio digital signals output to connector
CN5701 on Main board?
CN5701 27pin ADATA32
CN5701 26pin ADATA22
CN5701 25pin ADATA42
CN5701 22pin ALRCK2
CN5701 21pin ADATA12
CN5701 20pin ABLCK2
CN5701 18pin AMCLK2
No
Replace the Main board
Yes
Are control signals output to connector
CN5701 on Main board?
CN5701 23pin DAC_RST#
CN5701 16pin DAC_MDO
CN5701 15pin DAC_MDI
CN5701 14pin DAC_MC
CN5701 13pin DAC_CS#
CN5701 12pin DAC_MUT
CN5701 2pin XAMUTE
CN5701 1pin XMMUTE
Yes
Proceed to ‘‘Audio board flowchart’’
No
Replace the Main board
Main Set, Power Supply Section
Flowchart No.6
Video is not played back normally
Try to play CD (YEDS-18), DVD (HLX-504 or HLX-505)
and BD (BLX-104) respectively.
Is any one played back normally?
Yes
Check/replace the drive flexible PWB (MBD-003).
If not improved by replacement, replace the Drive
If not improved by replacement, replace the Main board
No
Go to Flowchart No.3
“Drive does not operate normally”
5-6
Main Set, Power Supply Section
Flowchart No.7
Audio is not played back normally
Does the drive operate normally?
No
See Flowchart No.3 ‘‘Drive does not operate normally’’
in this section
Yes
No
Audio present to Digital OUT
(HDMI/COAXIAL/SPDIF)?
Replace the Main board
Yes
5-7
Audio digital signals outputted to connector
CN5701 on Main board?
CN5701 27pin ADATA32
CN5701 26pin ADATA22
CN5701 25pin ADATA42
CN5701 22pin ALRCK2
CN5701 21pin ADATA12
CN5701 20pin ABLCK2
CN5701 18pin AMCLK2
No
Replace the Main board
Yes
Control signals outputted to connector
CN5701on Main board?
CN5701 23pin DAC_RST#
CN5701 16pin DAC_MDO
CN5701 15pin DAC_MDI
CN5701 14pin DAC_MC
CN5701 13pin DAC_CS#
CN5701 12pin DAC_MUT
CN5701 2pin XAMUTE
CN5701 1pin XMMUTE
Yes
Proceed to ‘‘Audio board flowchart’’
No
Replace the Main board
Main Set, Power Supply Section
Flowchart No.8
Fan does not rotate
Is about 8V supplied to connector CN6701 1pin
on Main board?
No
EV+12V supplied to connector CN6002 2pin
on Main board?
Yes
Replace the Fan
No
Is P202 fuse on Power board OK?
Yes
Replace the Main board
Yes
Replace the Power board
No
Replace the Power board
5-8
Operation & Display Section
Flowchart No.1
Disabled operation from remote controller
Operation from remote controller is disabled though
operation is enabled from a key on main set
Is the power turned on by Power ON button
of remote controller?
NO
Replace the Main board
Yes
Is “L” pulse signal input to CN100 30pin on FL board
when operating remote controller?
5-9
Yes
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
No
Is “L” pulse signal input to CN101 2pin on FL board
when operating remote controller?
Yes
Conductor from CN101 2pin to CN100 30pin on
FL board is broken.
NO
Symptom improved after FR board was replaced?
Yes
Check peripheral parts of IC601
(light receiver from remote controller) on FR board.
If faulty, replace the FR board.
No
Replace the FL board flexible cable (FLR-011)
Operation & Display Section
Flowchart No.2
Disabled key operation
Are the specified voltages output to connector CN100
8 and 28 pins on FL board when each button is pressed?
Power
Key0=28pin: 4.06~4.49 [V]
Open/Close Key0=28pin: 1.36~1.50 [V]
Play
Key1=8pin: 3.43~3.79 [V]
Pause
Key1=8pin: 2.13~2.35 [V]
Stop
Key1=8pin: 2.78~3.07 [V]
Previous
Key1=8pin: 0.72~0.80 [V]
Next
Key1=8pin: 1.36~1.50 [V]
Yes
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
No
Symptom improved if FR board is replaced?
Yes
No
Symptom improved if FL board flexible cable (FLR-011) is
replaced?
Yes
Replace the FR board
Replace the FL board flexible cable (FLR-011)
5-10
Reference: Relation between buttons and voltages
KEY
Specified voltages [v]
SPEC
CENTER
KEY1
KEY0
0
0
0.76
PREVIOUS
0.72~0.80
NEXT
OPEN/CLOSE
1.36~1.50
1.43
2.13~2.35
2.24
PAUSE
2.78~3.07
2.92
STOP
3.43~3.79
PLAY
3.61
P_ON
4.06~4.49
4.27
No
FL board flowchart 2
Operation & Display Section
Flowchart No.3
FL display tube does not light
Is 2V voltage supplied to connector CN100 24pin
on FL board?
No
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
No
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
No
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
Yes
Is 0V voltage supplied to connector CN100 10pin
on FL board?
Yes
Are STB, CLK and DIN signals input to connector
CN100 2, 4, 5 pins on FL board?
5-11
CN100 5pin STB
CN100 2pin CLK
CN100 4pin DATA
Yes
FL board flowchart 3
Operation & Display Section
Flowchart No.4
LED does not light up
5V voltage supplied to connector CN100 15pin on
FL board?
3.3V voltage supplied to connector CN100 on
FL board?
CN100
CN100
CN100
CN100
CN100
No
No
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
Check/replace the FL board flexible cable (MAIN h FL).
If not improved by replacement, replace the Main board.
24pin Power button
26pin Blue HD
12pin HD
11pin HDMI
10pin FL OFF
Does the LED on FR board light up?
No
5-12
Check LED peripheral parts on FL board.
If faulty, replace the FL board.
Yes
No
Symptom improved if FR board is replaced?
Yes
Check LED peripheral parts on FR board.
If faulty, replace the FR board.
Replace the FL board flexible cable (FL h FR).
Audio Section
No
Is each power supplied to Audio board?
CN001
CN001
CN001
CN001
24pin
22pin
20pin
18pin
Replace the Main board
-12V
+12V
+6V
+3V
Yes
Check the power circuits on Audio board
No
Check the circuits on input side of IC001, 002, 003
IC003 INPUT pin 12V
IC002 INPUT pin 12V
IC001 INPUT pin -12V
Yes
No
5-13
Check the outputs of each Reg IC
IC003 OUTPUT pin 5V
IC002 OUTPUT pin 10V
IC001 OUTPUT pin -10V
Check the output of IC006, 007, 008
Check the output and peripheral circuits of IC009,
010, 011
Check the circuits on output side of IC001, 002, 003
FL Section
Flowchart No.1
Inactive Power button on main set
Yes
Is the symptom improved by replacing the FL board?
No
Replace the Main board
Yes
Does the potential of CN100 28pin (Key 0) change to
around 4.3V when Power button is pressed?
Yes
Key 1 line is broken. Replace the FL board.
No
Check the FL-MAIN flexible cable
5-14
FL Section
Flowchart No.2
Inactive keys on main set
Yes
Symptom improved if FL board is replaced?
No
Replace the Main board
Yes
Which line of keys is inactive?
Key 0 t Go to “Key 0 is inactive”
Key 1 t Go to “Key 1 is inactive”
Key 0 is inactive (Power button is active)
Is about 5V present in CN100 28pin without pressing a key?
No
Check 5V line, R117 periphery and conductors on the FL board.
If faulty, replace the FL board.
No
Check the resistors and conductors on Key 0 line.
If faulty, replace the FL board.
No
Check 5V line, R120 periphery and conductors on the FL board.
If faulty, replace the FL board.
No
Check the resistors and conductors on Key 1 line.
If faulty, replace the FL board.
Yes
5-15
Does the potential of CN100 28pin (Key 0) change
when CN101 3pin and 1pin are short-circuited?
Yes
Check resistance of resistors on Key1 line.
Also, check peripheral conductor patterns.
Key 1 is inactive
Is about 5V present in CN100 28pin without pressing a key?
Yes
Does the potential of CN100 8pin (Key 1) change
when CN101 4pin and 1pin are short-circuited?
Yes
Check resistance of resistors on Key1 line.
Also, check peripheral conductor patterns.
Reference: Relation between buttons and voltages
KEY
Specified voltages [v]
SPEC
CENTER
KEY1
KEY0
0
0
0.76
PREVIOUS
0.72~0.80
OPEN/CLOSE
NEXT
1.36~1.50
1.43
2.13~2.35
2.24
PAUSE
2.78~3.07
2.92
STOP
3.43~3.79
PLAY
3.61
P_ON
4.06~4.49
4.27
FL Section
Flowchart No.3
FL tube does not light
Yes
No
Is about 5V applied to F100?
Go to “FL tube switch periphery check”
Yes
Is about -24V applied to JL105?
No
Check the FL tube DD converter peripheral circuits.
If faulty, replace the FL board.
Yes
No
Is 5V applied to IC100 43pin?
Check the 5V line on FL board.
Yes
No
Does the IC100 5pin oscillate?
5-16
Replace the IC100.
If not effective, replace the FL board.
Yes
Are the pulses input to IC100 7, 8, 9 pins?
Yes
Check the wiring between FL tube and IC100.
If OK, replace the IC100.
If not effective, replace the FL board.
No
Replace the FL-MAIN FFC.
If not effective, replace the Main board.
FL Section
Flowchart No.4
FL tube switch periphery check
Is the potential of Q103 1, 2, 3 pins 5V?
No
Check the 5V line on FL board.
Yes
Is the potential of Q103 4pin around 0V?
No
No
Is the Q102 base voltage about 3V?
Yes
Yes
Replace the Q103
No
Is the Q101 base voltage 0V?
Yes
Replace the Q102
Replace the Q101
5-17
No
No
Is the CN100 10pin 0V?
Does the CN100 10pin become 0V when Dimmer button
on remote controller is pressed several times?
Yes
Yes
Replace the Main board
Is the Q100 24pin about 3V?
Yes
Replace the Q100
No
Replace the Main board
No
Dimmer has effect only
MEMO
5-18E
BDP-S300/S301
SECTION 6
REPAIR PARTS LIST
6-1.
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they may
have some difference from the original one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color
Cabinet's Color
• Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
6-1-1.
• The mechanical parts with no reference number in
the exploded views are not supplied.
• Accessories and packing materials are given in the
last of the electrical parts list.
• Abbreviation
AUS : Australian model
CND : Canadian model
E32 : Latin American model
RUS : Russian model
SP : Singaporean model
TH : Thai model
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
CASE ASSY
A001
5
not supplied
7
4
5
main chassis block
3
2
1
Ref. No.
1
1
2
2
3
4
5
7
Part No.
Description
Ref. No.
Remark
X-2177-651-1 PANEL ASSY, FRONT
(S300BJ/S300BJP/S300BM)
X-2178-128-1 PANEL ASSY, FRONT (S301BJ/S301BM)
X-2177-652-1 COVER ASSY, TRAY
(S300BJ/S300BJP/S301BJ)
X-2186-585-1 COVER ASSY, TRAY (S300BM/S301BM)
2-686-188-02 PLATE, BD INDICATION
7
4-942-568-41 EMBLEM (NO.5), SONY
3-070-883-71 SCREW, TAPPING
A-1267-558-A CASE BLOCK ASSY (SERVICE USE SKZ)
(S300BJ/S300BJP/S301BJ)
A001
6-1
A001
A001
Part No.
Description
Remark
A-1313-101-A CASE BLOCK ASSY (SERVICE USE SOEM)
(S300BM/S301BM)
1-479-848-31 REMOTE COMMANDER (RMT-B101A)
(S300BJ/S300BJP/S300BM: US, CND/
S301BJ/S301BM)
1-479-848-41 REMOTE COMMANDER (RMT-B101A)
(S300BM: E32)
1-480-207-21 REMOTE COMMANDER (RMT-B101P)
(S300BM: AEP, UK, RUS, SP, TH, AUS)
6-1-2.
MAIN CHASSIS BLOCK
51
58
55
#1
51
not supplied
53
#1
54
not supplied
51
56
not supplied
57
59
not supplied
(FL-176 board)
51
51
not supplied
main block
51
not supplied
(FR-271 board)
Note: Please install it when Ref. No. 58 or 59 parts have
not adhered when drive is exchanged. Please refer
to SERVICE NOTE for the installation method.
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Note: Please use A-1337-670-A for BD drive with priority. (US, CND)
Ref. No.
Part No.
51
* 53
* 54
3-077-331-01 +BV3 (3-CR)
4-099-553-01 REUSE CLAMP
1-965-333-11 HARNESS (MBD-003)
(S300BJ/S300BJP/S301BJ)
1-965-684-11 HARNESS (MBD-007)
(S300BM: US, CND/S301BM)
1-965-688-11 HARNESS (MBD-008)
(S300BM: AEP, UK, RUS, E32, SP, TH, AUS)
* 54
* 54
0 55
55
Description
Remark
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Ref. No.
Part No.
Description
0 55
0 55
0 55
0 55
A-1337-677-A
A-1337-678-A
A-1382-235-A
A-1382-236-A
DRIVE (SOEM (SERVICE USE R2)) (AEP, UK)
DRIVE (SOEM (SERVICE USE R4)) (AUS)
DRIVE (SOEM (SERVICE USE R3)) (SP/TH)
DRIVE (SOEM (SERVICE USE R5)) (RUS)
56
57
58
59
#1
1-787-625-21
3-077-331-31
3-087-220-01
2-348-685-01
7-682-544-09
FAN, DC
+BV3 (3-CR)
TAPE, NON-HALOGENE
SPRING, EARTH (FRONT)
+B 3X3
A-1337-670-A DRIVE (P (SERVICE USE R1)) (US, CND)
A-1337-673-A DRIVE (SKZ (SERVICE USE R1)) (US, CND)
6-2
Remark
6-1-3.
103
MAIN BLOCK
not supplied
(AU-258 board)
103
102
102
not supplied
not supplied
101
103
not supplied
105
not supplied
108
108
#1
not supplied
109
not supplied
The components identified by mark 9 contain confidential information.
Strictly follow the instructions whenever the components are repaired
and/or replaced.
Note: Please install it when Ref. No. 109 part have not adhered
when drive is exchanged. Please refer to SERVICE NOTE
for the installation method.
Les composants identifiés par la marque 9 contiennent des informations
confidentielles.
Suivre scrupuleusement les instructions chaque fois qu’un composant
est remplacé et / ou réparé.
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Ref. No.
101
102
103
Part No.
Description
1-834-107-11 CABLE, FLEXIBLE FLAT (FML-003)
3-087-220-01 TAPE, NON-HALOGENE
3-077-331-01 +BV3 (3-CR)
Remark
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Ref. No.
Part No.
0 105
1-474-057-41 POWER BLOCK (ZSSR641GA)
(US, CND)
0 105
1-474-057-51 POWER BLOCK (ZSSR641IA)
(AEP, UK, RUS, SP, TH, AUS)
3-077-331-31 +BV3 (3-CR)
3-274-166-01 GASKET, REAR
7-682-544-09 +B 3X3
108
109
#1
6-3
Description
Remark
AU-258
6-2. ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the
parts list may be different from the parts specified in the diagrams or the components used
on the set.
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
• RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
Ref. No.
Part No.
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
• Items marked “*” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• SEMICONDUCTORS
In each case, u: µ, for example:
uA. . : µA. . uPA. . : µPA. .
uPB. .
: µPB. . uPC. . : µPC. .
uPD. .
: µPD. .
• CAPACITORS
uF: µF
• COILS
uH: µH
Description
Remark
Ref. No.
AU-258 BOARD, COMPLETE
(Ref. No. 1000 Series)
***********************
< CAPACITOR >
C002
C003
C004
C005
C006
1-126-767-11
1-126-947-11
1-126-947-11
1-107-826-11
1-126-947-11
ELECT
ELECT
ELECT
CERAMIC CHIP
ELECT
1000uF
47uF
47uF
0.1uF
47uF
20%
20%
20%
10%
20%
16V
35V
35V
16V
35V
C007
C008
C009
C010
C015
1-126-947-11
1-107-826-11
1-107-826-11
1-107-826-11
1-107-826-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
0.1uF
0.1uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
35V
16V
16V
16V
16V
C016
C017
C018
C019
C020
1-107-826-11
1-107-826-11
1-128-528-11
1-128-528-11
1-126-967-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
ELECT
0.1uF
0.1uF
470uF
470uF
47uF
10%
10%
20%
20%
20%
16V
16V
25V
25V
50V
C022
C023
C024
C033
C035
1-164-230-11
1-164-230-11
1-164-230-11
1-126-947-11
1-126-947-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
220PF
220PF
220PF
47uF
47uF
5%
5%
5%
20%
20%
50V
50V
50V
35V
35V
C036
C037
C040
C041
C042
1-100-388-21
1-100-388-21
1-107-826-11
1-107-826-11
1-107-826-11
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
39uF
39uF
0.1uF
0.1uF
0.1uF
20%
20%
10%
10%
10%
16V
16V
16V
16V
16V
C043
C045
C046
C047
C048
1-107-826-11
1-126-947-11
1-100-388-21
1-107-826-11
1-107-826-11
CERAMIC CHIP
ELECT
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47uF
39uF
0.1uF
0.1uF
10%
20%
20%
10%
10%
16V
35V
16V
16V
16V
C049
C050
C051
C052
C053
1-107-826-11
1-107-826-11
1-107-826-11
1-107-826-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C054
C055
C056
1-107-826-11 CERAMIC CHIP
1-107-826-11 CERAMIC CHIP
1-126-964-11 ELECT
0.1uF
0.1uF
10uF
10%
10%
20%
16V
16V
50V
6-4
Part No.
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
When indicating parts by reference
number, please include the board.
Description
Remark
C057
C058
1-107-826-11 CERAMIC CHIP
1-126-964-11 ELECT
0.1uF
10uF
10%
20%
16V
50V
C060
C061
C062
C063
C064
1-107-826-11
1-126-964-11
1-165-884-91
1-165-884-91
1-165-884-91
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
10uF
2.2uF
2.2uF
2.2uF
10%
20%
10%
10%
10%
16V
50V
6.3V
6.3V
6.3V
C071
C072
C073
C074
C079
1-130-473-00
1-130-473-00
1-130-473-00
1-130-473-00
1-130-473-00
MYLAR
MYLAR
MYLAR
MYLAR
MYLAR
0.0015uF
0.0015uF
0.0015uF
0.0015uF
0.0015uF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C080
C081
C082
C083
C084
1-130-473-00
1-130-467-00
1-130-467-00
1-130-467-00
1-130-467-00
MYLAR
MYLAR
MYLAR
MYLAR
MYLAR
0.0015uF
470PF
470PF
470PF
470PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C085
C086
C087
C088
C105
1-130-467-00
1-130-467-00
1-130-467-00
1-130-467-00
1-130-467-00
MYLAR
MYLAR
MYLAR
MYLAR
MYLAR
470PF
470PF
470PF
470PF
470PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C106
C107
C108
C109
C110
1-130-467-00
1-130-467-00
1-130-467-00
1-107-826-11
1-107-826-11
MYLAR
MYLAR
MYLAR
CERAMIC CHIP
CERAMIC CHIP
470PF
470PF
470PF
0.1uF
0.1uF
5%
5%
5%
10%
10%
50V
50V
50V
16V
16V
C116
C117
C118
C119
C120
1-107-826-11
1-107-826-11
1-107-826-11
1-128-552-11
1-128-552-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
0.1uF
0.1uF
0.1uF
47uF
47uF
10%
10%
10%
20%
20%
16V
16V
16V
63V
63V
C121
C122
C123
C124
C125
1-128-552-11
1-128-552-11
1-107-826-11
1-136-165-00
1-136-165-00
ELECT
ELECT
CERAMIC CHIP
FILM
FILM
47uF
47uF
0.1uF
0.1uF
0.1uF
20%
20%
10%
5%
5%
63V
63V
16V
50V
50V
C126
C127
C128
C129
C133
1-136-165-00
1-136-165-00
1-128-552-11
1-128-552-11
1-136-165-00
FILM
FILM
ELECT
ELECT
FILM
0.1uF
0.1uF
47uF
47uF
0.1uF
5%
5%
20%
20%
5%
50V
50V
63V
63V
50V
AU-258
Ref. No.
Part No.
Description
C134
C137
C138
C139
C140
1-136-165-00
1-162-927-11
1-162-927-11
1-162-927-11
1-162-927-11
FILM
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
100PF
100PF
100PF
100PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
Remark
C141
C142
C143
C144
C147
1-162-927-11
1-162-927-11
1-162-927-11
1-162-927-11
1-165-908-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
100PF
100PF
100PF
1uF
5%
5%
5%
5%
10%
50V
50V
50V
50V
10V
C148
C149
1-165-908-11 CERAMIC CHIP
1-165-908-11 CERAMIC CHIP
1uF
1uF
10%
10%
10V
10V
Ref. No.
< DIODE >
D001
D002
D003
8-719-914-43 DIODE DAN202K
8-719-988-61 DIODE 1SS355TE-17
8-719-988-61 DIODE 1SS355TE-17
< IC >
IC001
IC002
IC003
IC004
IC006
6-702-296-01
6-700-792-01
8-759-052-52
8-759-679-55
6-707-237-01
IC
IC
IC
IC
IC
NJM79M09DL1A-TE1
NJM78M09DL1A (TE1)
L78M05T-FA
SN74LVC08APWR
PCM1791ADBR
IC007
IC008
IC009
IC010
IC011
6-707-237-01
6-707-237-01
8-759-656-83
8-759-656-83
8-759-656-83
IC
IC
IC
IC
IC
PCM1791ADBR
PCM1791ADBR
NJM4580MD-(TE2)
NJM4580MD-(TE2)
NJM4580MD-(TE2)
< JACK >
J001
J003
1-785-489-11 JACK, PIN 6P (5.1CH OUTPUT)
1-785-868-21 JACK, PIN 2P (AUDIO OUT L/R)
< TRANSISTOR >
Q001
Q002
Q003
Q004
Q005
8-729-421-19
8-729-921-80
8-729-421-19
8-729-045-17
8-729-010-29
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
UN2213
2SD1781K-T146-QR
UN2213
2SB1561T100Q
MSD601-RST1
Q006
Q007
Q008
Q009
Q011
8-729-027-53
8-729-027-53
8-729-010-05
8-729-010-05
8-729-027-53
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTC124TKA-T146
DTC124TKA-T146
MSB709-RT1
MSB709-RT1
DTC124TKA-T146
Q013
Q014
Q015
Q017
Q018
8-729-010-05
8-729-421-19
8-729-421-19
8-729-421-19
6-551-287-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
MSB709-RT1
UN2213
UN2213
UN2213
2SD2704K-T146
Q019
Q020
Q021
Q022
Q023
6-551-287-01
6-551-287-01
6-551-287-01
6-551-287-01
6-551-287-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SD2704K-T146
2SD2704K-T146
2SD2704K-T146
2SD2704K-T146
2SD2704K-T146
< RESISTOR >
R002
R004
R007
R009
1-216-809-11
1-216-801-11
1-216-801-11
1-216-801-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
22
22
22
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
6-5
Part No.
Description
Remark
R011
1-216-833-11 METAL CHIP
10K
5%
1/10W
R012
R017
R018
R019
R020
1-216-833-11
1-216-833-11
1-216-801-11
1-216-833-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
10K
22
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R021
R022
R023
R024
R028
1-216-841-11
1-216-864-11
1-216-845-11
1-216-849-11
1-216-833-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
0
100K
220K
10K
5%
1/10W
5%
5%
5%
1/10W
1/10W
1/10W
R029
R031
R032
R034
R035
1-216-841-11
1-216-833-11
1-216-833-11
1-216-833-11
1-216-833-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
10K
10K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R036
R038
R077
R078
R080
1-216-833-11
1-216-833-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
10K
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R081
R082
R083
R084
R085
1-216-657-11
1-216-657-11
1-216-657-11
1-216-657-11
1-216-657-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.8K
1.8K
1.8K
1.8K
1.8K
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R086
R087
R088
R093
R094
1-216-657-11
1-216-657-11
1-216-657-11
1-216-657-11
1-216-657-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.8K
1.8K
1.8K
1.8K
1.8K
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R095
R096
R103
R104
R105
1-216-657-11
1-216-657-11
1-216-663-11
1-216-647-11
1-216-647-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.8K
1.8K
3.3K
680
680
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R106
R107
R108
R109
R110
1-216-663-11
1-216-663-11
1-216-647-11
1-216-647-11
1-216-663-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
3.3K
3.3K
680
680
3.3K
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R111
R112
R113
R114
R115
1-216-663-11
1-216-647-11
1-216-647-11
1-216-663-11
1-216-663-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
3.3K
680
680
3.3K
3.3K
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R116
R117
R118
R129
R130
1-216-647-11
1-216-647-11
1-216-663-11
1-216-663-11
1-216-647-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
680
680
3.3K
3.3K
680
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R131
R132
R133
R134
R135
1-216-647-11
1-216-663-11
1-216-663-11
1-216-647-11
1-216-647-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
680
3.3K
3.3K
680
680
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R136
R137
R138
R139
1-216-663-11
1-208-774-11
1-208-774-11
1-208-774-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
3.3K
470
470
470
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
AU-258
Ref. No.
FL-176
Part No.
Description
Remark
R140
1-208-774-11 METAL CHIP
470
0.5%
1/10W
R141
R142
R143
R144
R145
1-208-774-11
1-208-774-11
1-208-822-11
1-208-822-11
1-208-822-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470
470
47K
47K
47K
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R146
R149
R150
R153
R154
1-208-822-11
1-208-822-11
1-208-822-11
1-216-829-11
1-216-829-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47K
47K
47K
4.7K
4.7K
0.5%
0.5%
0.5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R155
R156
R157
R158
R161
1-216-829-11
1-216-829-11
1-216-829-11
1-216-829-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
4.7K
4.7K
4.7K
4.7K
100K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R162
R163
R165
R166
R167
1-216-845-11
1-216-845-11
1-208-774-11
1-208-774-11
1-208-774-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
470
470
470
5%
5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R168
R169
R170
R171
R173
1-208-774-11
1-208-774-11
1-208-774-11
1-208-774-11
1-208-774-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470
470
470
470
470
0.5%
0.5%
0.5%
0.5%
0.5%
1/10W
1/10W
1/10W
1/10W
1/10W
R175
R176
R177
R178
1-216-864-11
1-216-864-11
1-216-864-11
1-216-809-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
0
0
100
Ref. No.
D105
Part No.
Description
Remark
8-719-036-94 DIODE RD5.6SB-T1
< FUSE >
0 F100
1-576-863-21 FUSE 0.5A 32V
< FERRITE BEAD >
FB001
FB002
FB003
FB004
1-414-226-21
1-414-226-21
1-414-226-21
1-414-226-21
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
< IC >
IC100
8-759-643-83 IC uPD16315GB-3BS
< COIL >
L102
1-414-743-21 INDUCTOR
47uH
< FLUORESCENT INDICATOR TUBE >
ND100
1-519-958-11 INDICATOR TUBE, FLUORESCENT
< TRANSISTOR >
5%
Q100
Q101
Q102
Q103
Q104
8-729-027-46
8-729-901-00
8-729-901-00
6-551-382-01
8-729-901-88
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
Q105
8-729-901-88 TRANSISTOR
DTC114YKA-T146
DTC124EK
DTC124EK
RSS040P03FD5TB
2SC2411K-CR
2SC2411K-CR
< RESISTOR >
1/10W
FL-176 BOARD, COMPLETE
(Ref. No. 2000 Series)
**********************
R100
R101
R102
R103
R104
1-216-864-11
1-216-833-11
1-216-864-11
1-216-837-11
1-216-837-11
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
10K
0
22K
22K
R105
R106
R107
R108
R109
1-216-837-11
1-216-805-11
1-216-805-11
1-216-805-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
R110
R111
R112
R113
R117
1-216-824-11
1-216-845-11
1-216-838-11
1-216-833-11
1-216-833-11
R118
R119
R120
R121
R122
R123
R124
R125
R126
5%
1/10W
5%
5%
1/10W
1/10W
22K
47
47
47
0
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.8K
100K
27K
10K
10K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1-216-832-11
1-216-834-11
1-216-833-11
1-216-824-11
1-216-825-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
8.2K
12K
10K
1.8K
2.2K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
1-216-832-11
1-216-834-11
1-216-834-11
1-216-839-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
8.2K
12K
12K
33K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
< CAPACITOR >
C101
C102
C105
C108
C113
1-125-972-91
1-107-826-11
1-164-227-11
1-125-972-91
1-163-021-91
ELECT
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
100uF
0.1uF
0.022uF
100uF
0.01uF
20%
10%
10%
20%
10%
16V
16V
25V
16V
50V
C115
C117
C118
C119
C120
1-107-826-11
1-107-715-11
1-115-339-11
1-115-339-11
1-115-339-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
22uF
0.1uF
0.1uF
0.1uF
10%
20%
10%
10%
10%
16V
50V
50V
50V
50V
C123
C124
1-107-726-91 CERAMIC CHIP
1-107-726-91 CERAMIC CHIP
0.01uF
0.01uF
10%
10%
16V
16V
< CONNECTOR >
CN100
CN101
1-770-658-11 CONNECTOR, FFC/FPC 30P
1-779-279-11 CONNECTOR, FFC (LIF (NON-ZIF)) 11P
< DIODE >
D100
D101
D102
D103
D104
8-719-941-86
8-719-988-61
8-719-988-61
8-719-988-61
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
DAN202U
1SS355TE-17
1SS355TE-17
1SS355TE-17
1SS355TE-17
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
6-6
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
FL-176
Ref. No.
Part No.
Description
Remark
Ref. No.
FR-271
Part No.
MAIN
POWER BLOCK
Description
Remark
< SWITCH >
S100
1-771-410-21 SWITCH, TACTILE (I/1)
< TRANSFORMER >
0 T100
1-445-229-11 TRANSFORMER, DC-DC CONVERTER
************************************************************
************************************************************
FR-271 BOARD, COMPLETE
(Ref. No. 2000 Series)
**********************
0
1-474-057-41 POWER BLOCK (ZSSR641GA)
(US, CND)
0
1-474-057-51 POWER BLOCK (ZSSR641IA)
(AEP, UK, RUS, SP, TH, AUS)
************************
< CAPACITOR >
C602
C605
1-107-826-11 CERAMIC CHIP
1-124-589-11 ELECT
0.1uF
47uF
10%
20%
16V
16V
< CONNECTOR >
*
CN600
1-779-279-11 CONNECTOR, FFC (LIF (NON-ZIF)) 11P
MISCELLANEOUS PARTS
********************
< DIODE >
* D601
D603
D604
D605
6-501-546-11
6-501-437-01
6-501-437-01
6-501-437-01
DIODE
DIODE
DIODE
DIODE
NSPW-310BST-A0S
SLI-343YC3F
SLI-343YC3F
SLI-343YC3F
* 54
* 54
* 54
< IC >
IC601
0 55
0 55
55
0 55
0 55
0 55
56
101
6-600-500-01 IC GP1UM28XK0SF
< TRANSISTOR >
Q600
Q602
Q603
Q604
8-729-421-22
8-729-421-22
8-729-421-22
8-729-421-22
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
UN2211
UN2211
UN2211
UN2211
ACCESSORIES & PACKING MATERIALS
********************************
< RESISTOR >
R602
R604
R606
R607
R608
1-216-805-11
1-216-808-11
1-216-824-11
1-216-832-11
1-216-834-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
47
82
1.8K
8.2K
12K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R609
R610
R611
R612
R614
1-216-825-11
1-216-832-11
1-216-834-11
1-216-834-11
1-216-815-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
8.2K
12K
12K
330
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R615
R616
1-216-815-11 METAL CHIP
1-216-815-11 METAL CHIP
330
330
5%
5%
1/10W
1/10W
A001
A001
A001
0
0
0
0
< SWITCH >
0
S600
S601
S602
S603
S604
1-771-410-21
1-771-410-21
1-771-410-21
1-771-410-21
1-771-410-21
SWITCH, TACTILE (A)
SWITCH, TACTILE (.)
SWITCH, TACTILE (>)
SWITCH, TACTILE (X)
SWITCH, TACTILE (x)
1-479-848-31 REMOTE COMMANDER (RMT-B101A)
(S300BJ/S300BJP/S300BM: US, CND/
S301BJ/S301BM)
1-479-848-41 REMOTE COMMANDER (RMT-B101A)
(S300BM: E32)
1-480-207-21 REMOTE COMMANDER (RMT-B101P)
(S300BM: AEP, UK, RUS, SP, TH, AUS)
1-555-074-52 CORD, POWER (S300BM: AUS)
1-569-008-22 ADAPTOR, CONVERSION 2P (S300BM: E32)
1-575-131-82 CORD, POWER (S300BM: AEP, RUS, E32, SP)
1-776-263-22 CORD, CONNECTION
1-823-701-11 CORD, POWER
(S300BJ/S300BJP/S300BM: US, CND/
S301BJ/S301BM)
1-827-269-12 CORD, POWER (S300BM: UK)
1-834-169-11 CORD, CONNECTION (HDMI CABLE)
(S301BJ/S301BM)
The components identified by mark 9 contain confidential information.
Strictly follow the instructions whenever the components are repaired
and/or replaced.
S605
1-771-410-21 SWITCH, TACTILE (H)
************************************************************
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
1-965-333-11 HARNESS (MBD-003)
(S300BJ/S300BJP/S301BJ)
1-965-684-11 HARNESS (MBD-007)
(S300BM: US, CND/S301BM)
1-965-688-11 HARNESS (MBD-008)
(S300BM: AEP, UK, RUS, E32, SP, TH, AUS)
A-1337-670-A DRIVE (P (SERVICE USE R1)) (US, CND)
A-1337-673-A DRIVE (SKZ (SERVICE USE R1)) (US, CND)
A-1337-677-A DRIVE (SOEM (SERVICE USE R2)) (AEP, UK)
A-1337-678-A DRIVE (SOEM (SERVICE USE R4)) (AUS)
A-1382-235-A DRIVE (SOEM (SERVICE USE R3)) (SP/TH)
A-1382-236-A DRIVE (SOEM (SERVICE USE R5)) (RUS)
1-787-625-21 FAN, DC
1-834-107-11 CABLE, FLEXIBLE FLAT (FML-003)
Les composants identifiés par la marque 9 contiennent des informations
confidentielles.
Suivre scrupuleusement les instructions chaque fois qu’un composant
est remplacé et / ou réparé.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
6-7
Ref. No.
Part No.
0
1-834-539-11 CORD, POWER (S300BM: TH)
3-196-787-11 MANUAL, INSTRUCTION (ENGLISH)
(S300BJ: CND/S300BJP/S301BJ)
3-196-787-21 MANUAL, INSTRUCTION (FRENCH)
(S300BJ: CND)
3-212-651-11 MANUAL, INSTRUCTION (ENGLISH)
(S300BJ: US)
3-214-290-11 MANUAL, INSTRUCTION (ENGLISH)
(S300BM: US, CND/S301BM)
Description
Remark
Ref. No.
3-214-290-21 MANUAL, INSTRUCTION (FRENCH)
(S300BM/S301BM: CND)
3-214-800-11 MANUAL, INSTRUCTION (ENGLISH)
(S300BM: UK)
3-214-800-21 MANUAL, INSTRUCTION (FRENCH)
(S300BM: AEP)
3-214-800-31 MANUAL, INSTRUCTION (GERMAN)
(S300BM: AEP)
3-214-800-41 MANUAL, INSTRUCTION (ITALIAN)
(S300BM: AEP)
3-214-800-51 MANUAL, INSTRUCTION (SPANISH)
(S300BM: AEP)
3-214-800-61 MANUAL, INSTRUCTION (DUTCH)
(S300BM: AEP)
3-214-800-71 MANUAL, INSTRUCTION (SWEDISH)
(S300BM: AEP)
3-214-800-81 MANUAL, INSTRUCTION (RUSSIAN)
(S300BM: RUS)
3-214-801-11 MANUAL, INSTRUCTION (ENGLISH)
(S300BM: SP, TH, AUS)
3-214-801-21 MANUAL, INSTRUCTION (SPANISH)
(S300BM: E32)
6-8E
Part No.
Description
Remark
BDP-S300/S301
Sony Corporation
9-883-948-22
Home Electronics Network Company
– 102 –
2007G0500-1
© 2007.7
Published by Quality Assurance Dept.
BDP-S300/S301
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2007.06
New
1.1
2007.07
Addition of AEP, UK, E, Russian, Australian, Singapore and Thai
Models.