Download Samsung VR5140C Service manual
Transcript
VIDEO CASSETTE RECORDER Chassis : Scorpio VR9180/9160/8160/5160 VR9180C/9160C/VR8170C/VR8160C/VR8140C VR5160C/5140C SERVICE MANUAL VR9180/9160/9180C/9160C/5160/5160C ELECTRONICS SERVICE Manual For mechanical disassembly and adjustment, refer to the “Mechanical Manual” (TS-10 VIDEO CASSETTE RECORDER CONTENTS 1. Precautions SHUTTLE JOG/ TV/VCR POWER EJECT MENU CHANNEL REC TRACKING LINE IN L AUDIO R VIDEO INPUT TAPE SPEED PLAY P/S 2. Alignment and Adjustment STOP VR9180/9180C 3. Exploded View and Parts List TV/VCR POWER VIDEO EJECT MENU REW CHANNEL REC TRACKING LINE IN L AUDIO R F.F INPUT TAPE SPEED P/S STOP 4. Electrical Parts List VR9160/9160C 5. Schematic Diagrams POWER EJECT REW PLAY F.F LINE IN 2 VIDEO L AUDIO R REC CHANNEL STOP MENU VR8160/5160/8160C/5160C POWER EJECT REW VIDEO L AUDIO REC CHANNEL R STOP LINE IN 2 MENU VR8170C POWER REW EJECT POWER © Samsung Electronics Co., Ltd. FEB. 2001 Printed in Korea AC68-01467A AC68-01405A). PLAY REC VR8140C/5140C F.F STOP PLAY F.F IMPORTANT SERVICE GUIDE ♦ MODE SWITCH (PROGRAM SWITCH) ASSEMBLY POINT 1) When installing the ass’y deck on the Main PCB, be sure to align the assembly point of mode switch. ASSEMBLY POINT (ALIGN TWO ARROWS) Fig. 1 ♦ HOW TO EJECT THE CASSETTE TAPE (If the unit does not operate on condition that tape is inserted into housing ass’y) 1) Turn the Gear Worm Œ clockwise in the direction of arrow with screw driver. (See Fig. 2) (Other method ; Remove the screw of Motor Load Ass’y, Separate the Motor Load Ass’y) 2) When Slider S, T are approached in the position of unloading, rotate holder Clutch counterclockwise after inserting screw driver in the hole of frame’s bottom in order to wind the unwiunded tape. (Refer to Fig. 3) (If you rotate Gear Worm Œ continuously when tape is in state of unwinding, you may cause a tape contamination by grease and tape damage. Be sure to wind the unwiunded tape in the state of set horizontally.) 3) Rotate Gear Worm ˇ clockwise using screw driver again up to the state of eject mode and then pick out the tape. (Refer to Fig. 2) Œ GEAR WORM FRAME Fig. 2 Fig. 3 1. Precautions 1. Be sure that all of the built-in protective devices are replaced. Restore any missing protective shields. 2. When reinstalling the chassis and its assemblies, be sure to restore all protective devices, including : control knobs and compartment covers. 3. Make sure that there are no cabinet openings through which people--particularly children --might insert fingers and contact dangerous voltages. Such openings include the spacing between the picture tube and the cabinet mask, excessively wide cabinet ventilation slots, and improperly fitted back covers. If the measured resistance is less than 1.0 megohm or greater than 5.2 megohms, an abnormality exists that must be corrected before the unit is returned to the customer. 4. Leakage Current Hot Check (See Fig. 1-1) : Warning : Do not use an isolation transformer during this test. Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7). 5. With the unit completely reassembled, plug the AC line cord directly the power outlet. With the unit’s AC switch first in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit, etc.) and all exposed metal parts, including : antennas, handle brackets, metal cabinets, screwheads and control shafts. The current measured should not exceed 0.5 milliamp. Reverse the power-plug prongs in the AC outlet and repeat the test. 6. X-ray Limits : The picture tube is designed to prohibit X-ray emissions. To ensure continued X-ray protection, replace the picture tube only with one that is the same type as the original. Samsung Electronics (READING SHOULD NOT BE ABOVE 0.5mA) LEAKAGE CURRENT TESTER DEVICE UNDER TEST TEST ALL EXPOSED METER SURFACES 2-WIRE CORD ALSO TEST WITH PLUG REVERSED (USING AC ADAPTER PLUG AS REQUIRED) EARTH GROUND Fig. 1-1 AC Leakage Test 7. Antenna Cold Check : With the unit’s AC plug disconnected from the AC source, connect an electrical jumper across the two AC prongs. Connect one lead of the ohmmeter to an AC prong. Connect the other lead to the coaxial connector. 8. High Voltage Limit : High voltage must be measured each time servicing is done on the B+, horizontal deflection or high voltage circuits. Heed the high voltage limits. These include the X-ray protection Specifications Label, and the Product Safety and X-ray Warning Note on the service data schematic. 9. Some semiconductor (“solid state”) devices are easily damaged by static electricity. Such components are called Electrostatically Sensitive Devices (ESDs); examples include integrated circuits and some field-effect transistors. The following techniques will reduce the occurrence of component damage caused by static electricity. 10. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your body by touching a known earth ground. Alternatively, wear a discharging Wrist-strap device. (Be sure to remove it prior to applying power--this is an electric shock precaution.) 1-1 Precautions 11. High voltage is maintained within specified limits by close-tolerance, safety-related components and adjustments. If the high voltage exceeds the specified limits, check each of the special components. 12. Design Alteration Warning : Never alter or add to the mechanical or electrical design of this unit. Example : Do not add auxiliary audio or video connectors. Such alterations might create a safety hazard. Also, any design changes or additions will void the manufacturer’s warranty. 13. Hot Chassis Warning : Some TV receiver chassis are electrically connected directly to one conductor of the AC power cord. If an isolation transformer is not used, these units may be safely serviced only if the AC power plug is inserted so that the chassis is connected to the ground side of the AC source. To confirm that the AC power plug is inserted correctly, do the following : Using an AC voltmeter, measure the voltage between the chassis and a known earth ground. If the reading is greater than 1.0V, remove the AC power plug, reverse its polarity and reinsert. Re-measure the voltage between the chassis and ground. 14. Some TV chassis are designed to operate with 85 volts AC between chassis and ground, regardless of the AC plug polarity. These units can be safely serviced only if an isolation transformer inserted between the receiver and the power source. 18. Picture Tube Implosion Warning : The picture tube in this receiver employs “integral implosion” protection. To ensure continued implosion protection, make sure that the replacement picture tube is the same as the original. 19. Do not remove, install or handle the picture tube without first putting on shatterproof goggles equipped with side shields. Never handle the picture tube by its neck. Some “in-line” picture tubes are equipped with a permanently attached deflection yoke; do not try to remove such “permanently attached” yokes from the picture tube. 20. Product Safety Notice : Some electrical and mechanical parts have special safety-related characteristics which might not be obvious from visual inspection. These safety features and the protection they give might be lost if the replacement component differs from the original--even if the replacement is rated for higher voltage, wattage, etc. Components that are critical for safety are indicated in the circuit diagram by shading, ( or ). Use replacement components that have the same ratings, especially for flame resistance and dielectric strength specifications. A replacement part that does not have the same safety characteristics as the original might create shock, fire or other hazards. 15. Never defeat any of the B+ voltage interlocks. Do not apply AC power to the unit (or any of its assemblies) unless all solid-state heat sinks are correctly installed. 16. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; always remove the instrument’s ground lead last. 17. Observe the original lead dress, especially near the following areas : Antenna wiring, sharp edges, and especially the AC and high voltage power supplies. Always inspect for pinched, outof-place, or frayed wiring. Do not change the spacing between components and the printed circuit board. Check the AC power cord for damage. Make sure that leads and components do not touch thermally hot parts. 1-2 Samsung Electronics 2. Alignment and Adjustment 2-1 Reference 1) X-Point (Tracking center) adjustment, “Head switching adjustment” and “NVRAM option setting” can be adjusted with remote control. 2) When replacing the Micom (IC601) and NVRAM (IC603 ; EEPROM) be sure to adjust the “Head switching adjustment” and “NVRAM option setting”. 3) When replacing the cylinder ass’y, be sure to adjust the “X-Point” and “Head switching adjustment”. 4) Among Samsung VCR remote control used for adjustment as a accessory, only the remote control that has figures buttons (0 ~ 9) is available for all adjustment regardless of chassis. 5) How to adjustment. - Momently short-circuit the test point on Main PCB with pincers to set the adjustment mode. - If the corresponding adjustment button is pressed, the adjustment is performed automatically. - If the adjustment is completed, be sure to turn the power off. 2-1-1 Location of adjustment button of remote control POWER SLOW VCR SHUTTLE TV V-LOCK REPLAY VCR POWER TV POWER EJECT TV/VCR EJECT SLOW X-Point (Tracking Center) Adjustment A.TRK A.TRK F.ADV/SKIP 100 100 TV/VCR PREV.CH ENTER VOL SELECT TV VCR REC.SPEED LIN E C RE SEA R C H /E X IN Head Switching Adjustment TRACKING VOL CH AUDIO PREV.CH DISPLAY SEARCH/EXIT IT CLEAR DIS PL A Y D IO AU CH/TRK MENU NVRAM Option Setting MENU REC P/STILL REC.SPEED CLEAR F.ADV 30S-SKIP D FW RE V REPLAY LINE IN Remote Control for adjustment is not supplied as a Service Jig. Fig. 2-1 Samsung Electronics 2-1 Alignment and Adjustment 2-1-2 Test point location for adjustment mode setting Application Models ; VR9180/9160/9180C/9160C/8160/5160/8170C/8160C/5160C Short-Circuit for a second and release. Fig. 2-2 Main PCB (Top View) 2-2 Samsung Electronics Alignment and Adjustment Application Models ; VR8140C/5140C Short-Circuit for a second and release. Fig. 2-3 Main PCB (Top View) Samsung Electronics 2-3 Alignment and Adjustment 2-2 Mechanical Adjustment Note : Refer to the Mechanical Manual “TS-10 (AC68-01405A)” for the adjustment and confirmation of ass’y deck. 2-2-1 The number and position of test point Test point : TP601 (Control Pulse) TP602 (H’D S/W -Trigger) TP301 (Envelope) TP302 (Audio output) TP303 (Video output) AUDIO OUTPUT ENVELOPE HEAD SWITCHING Fig. 2-4 Location of Test point (Main PCB-Top View) 2-2-2 ACE Head Position (X-Point) Adjustment (See the 2-2-1(d) ACE Head Position (X-Point) Adjustment on page 2-2 of the Mechanical Manual) 1) Playback the alignment tape (Color bar). 2) Momently short-circuit the test point on Main PCB with pincers to set the adjustment mode. (See Fig. 2-2 and 2-3) 3) Press the “5” button of remote control then adjustment is operated automatically. (See Fig. 2-1) 2-4 4) Connect the CH-1 probe to TP301 (Envelope) the CH-2 probe to TP602 (H’D switching pulse) and then trigger to CH-1. 5) Insert the (-) driver into the X-Point adjustment hole and adjust it so that envelope waveform is maximum. 6) Turn the Power off. Samsung Electronics Alignment and Adjustment 2-3 Head Switching Point Adjustment 1) Playback the alignment tape. 2) Momently short-circuit the test point on Main PCB with pincers to set the adjustment mode. (See Fig. 2-2 and 2-3) 3) Press the “REC.SPEED” button of remote control then adjustment is operated automatically. (See Fig. 2-1) 4) Turn the Power off. 2-4 NVRAM Option Setting 1) NVRAM Option is adjusted at production line basically. 2) In case Micom (IC601) and NVRAM (IC603 ; EEPROM) is replaced, be sure to set the corresponding option number of the repaired model. (If the option is not set, the unit is not operated.) 1) Momently short-circuit the test point on Main PCB with pincers to set the adjustment mode. (See Fig. 2-2 and 2-3) 2) Press the “MENU” button on the remote control about 5 seconds then option setting display is appeared. (See Fig. 2-5) 3) Select the option number (See Table 2-1) of corresponding model with “FF” and “REW” button on the remote control. 4) If selecting the option number is completed, press the “STOP” button of remote control. (If “STOP” button is pressed, the selected number is changes reversed color. ; See Fig. 2-5) 5) Press the “MENU” button of remote control again to store the option number. (“COMPLETE” is displayed for a second as shown Fig. 2-6 and the setting is completed.) 6) Turn the Power off. <Table 2-1> 01 02 03 04 05 06 07 08 MODELS OPTION NUMBER 09 10 11 12 13 14 15 16 VR9180 2, 4, 5, 6, 7, 10, 13, 14, 15, 24, 31, 32, 34, 37 17 18 19 20 21 22 23 24 VR9160 2, 4, 5, 6, 7, 10, 13, 15, 18, 31, 32, 34, 37 25 26 27 28 29 30 31 32 VR8160 2, 4, 5, 6, 7, 10, 15, 18, 25, 31, 34, 37 33 34 35 36 37 38 39 40 VR5160 4, 5, 6, 7, 15, 18, 25, 31, 34, 37 VR9180C 2, 4, 5, 6, 7, 10, 13, 14, 15, 24, 31, 32, 34, 37 VR9160C 2, 4, 5, 6, 7, 10, 13, 15, 18, 31, 32, 34, 37 VR8170C 2, 4, 5, 6, 7, 10, 15, 18, 25, 31, 34, 37 VR8160C 2, 4, 6, 7, 10, 15, 18, 25, 31, 34, 37 VR8140C 2, 4, 6, 7, 10, 12, 15, 20, 28, 30, 31, 37 VR5160C 4, 6, 7, 15, 18, 25, 31, 34, 37 VR5140C 4, 6, 7, 12, 15, 20, 28, 30, 31, 37 MOVE : SAVE : MENU Fig. 2-5 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 MOVE : COMPLETE Fig. 2-6 Samsung Electronics 2-5 Alignment and Adjustment MEMO 2-6 Samsung Electronics 3. Exploded View and Parts List Page 3-1 Cabinet Assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2 3-2 Mechanical Parts (Top Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-4 3-3 Mechanical Parts (Bottom Side) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6 Samsung Electronics 3-1 Exploded View and Parts List 3-1 Cabinet Assembly 155 153 S.N.A : Service Not Available 101 TM401B CN605B CN303B S601A FULL DECK (S.N.A) 200 FUNCTION PCB (S.N.A) MAIN-PCB (S.N.A) LD601A S602A BOTTOM-COVER (S.N.A) 157 FUNCTION PCB (S.N.A) BRACKET-FRAME (S.N.A) ASSY-PANEL FRONT VR9180/9180C REMOTE-CONTROL VR9180/9180C VR9160/9160C VCR POWER TV POWER EJECT TV/VCR SLOW 1 1 A.TRK 100 21 21 SELECT TV VCR TRACKING VOL CH AUDIO PREV.CH DISPLAY SEARCH/EXIT MENU REC P/STILL REC.SPEED LINE IN CLEAR REPLAY RE V D FW 22 F.ADV 30S-SKIP 22 VR9160/8160/5160/9160C/8170C/8160C/5160C POWER 51 EJECT SLOW VCR SHUTTLE TV V-LOCK 52 REPLAY A.TRK F.ADV/SKIP 100 TV/VCR PREV.CH ENTER VR8170C VOL AU D IO CH/TRK REC.SPEED LIN EI C RE VR8140C/5140C SEA N RCH/EXIT CLEAR DIS PL A Y VR8160/5160/8160C/5160C MENU 1 1 1 21 21 21 22 3-2 22 VR8410C/5410C 22 Samsung Electronics Exploded View and Parts List Loc. No 1 21 22 51 52 101 153 155 157 200 CN303B CN605B LD601A S601A S602A TM401B UT01 Parts No. Refer to table below Refer to table below AC61-62032A AC64-00616A AC64-00617A Refer to table below AC60-12126A AC60-12134A AC60-10063A AC39-10200N 3809-001206 3809-001131 AC61-21009A AC61-21008A AC61-21008A Refer to table below Refer to table below MODELS VR9180 VR9160 VR8160 VR5160 VR9180C VR9160C VR8170C VR8160C VR8140C VR5160C VR5140C Samsung Electronics 1 AC97-01273B AC97-01273A AC97-01287A AC97-01287B AC97-01237E AC97-01273F AC97-01278A AC97-01287C AC97-01245F AC97-01287D AC97-01245G Description ; Specification Remark ASSY-PANEL FRONT;HIPS94V2,VR9180,BLK DOOR-CASSETTE;VR9180,ABS94HBBLK,-,-,-,-, SPRING-MASK;X-9,-,SUS,-,4.4,-,SV-C130 KNOB-JOG;01T,ABS,-,-,-,KNOB-SHUTTLE;01T,ABS,-,-,-,-,-,CABINET TOP;VR9160,-,PCM(SECC),-,TM6524 SCREW-BH;-,BH,-,4*12,FE,FZY,-,-,SCREW-TAP BH;-,BH,-,2-4X16,-,FE SCREW-TAPTITE;BH,+,-,M3,L12,ZPC3,SWRCH18 POWER-CORD;EP2,SPT-2,AWG#18,1.8MT,WAFER, CABLE-FLAT;30V,-20to+80C,140mm,6P,1.25mm CABLE-FLAT;30V,80C,110MM,7P,1.25MM,UL289 HOLDER-LED;-,POM(M90-44),-,BLK,-,X-9 HOLDER-SENSOR;-,POM(M90-44),-,BLK,-,X-9 HOLDER-SENSOR;-,POM(M90-44),-,BLK,-,X-9 CONNECTOR-BOARD-ASSY;-,HIPS,-,T2,61,-,BL REMOCON-ASSY 21 AC64-00606C AC64-00606A AC64-00636A AC64-00636B AC64-00606E AC64-00606F AC64-00637A AC64-00636C AC64-00535F AC64-00636N AC64-00535G 101 AC64-00124D AC64-00124D AC64-00293A AC64-00293A AC64-00124B AC64-00124D AC64-00293A AC64-00293A AC64-00292A AC64-00293A AC64-00292A VR9180/9180C ONLY VR9180/9180C ONLY TM401B AC61-00058A AC61-00058A AC61-00058A AC61-11054A AC61-00058A AC61-00058A AC61-00058A AC61-00058A AC61-00002A AC61-11054A AC61-00050A UT01 AC59-00025C AC59-00024D AC59-00024C AC59-00024C AC59-00025D AC59-00024D AC59-00024D AC59-00024C AC59-10420H AC59-00024C AC59-10420H 3-3 Exploded View and Parts List 3-2 Mechanical Parts (Top Side) G001 K490 K502 K530 G530 G555 B473 G450 B474 G510 G420 G680 G480 (OPTIONAL) K546 K250 K240 (OPTIONAL) K248 B575 G681 B410 K350 K110 B440 K182 B448 K340 K330 B452 G546 K470 K140 K188 G527 G520 G060 3-4 G070 Samsung Electronics Exploded View and Parts List Loc. No B410 B440 B448 B452 B473 B474 B575 G001 G060 G070 G420 G450 G480 G510 G520 G527 G530 G546 G555 G680 G681 K110 K140 K182 K188 K240 K248 K250 K330 K340 K350 K470 K490 K502 K530 K546 Parts No. AC31-00012A AC60-10515A AC66-00008A AC66-00011A AC61-00105A AC61-30180A AC47-00002A AC97-01204A AC97-01202A 6006-001092 AC61-00161A AC66-80142A AC66-80141A AC33-00009A 6006-001075 AC66-00033A AC61-60553A AC33-00007A AC66-00005A AC66-00032A AC66-00046A AC61-50686A AC66-10267A AC66-10268A AC66-30524A AC66-00039A AC66-00035A AC61-00107A AC69-00104A AC66-30550A AC66-30549A AC61-00106A AC66-00020A AC61-00120A AC61-60561A AC66-00034A AC61-50658A Samsung Electronics Description ; Specification MOTOR-LOADING ASSY;-,TS-10,-,-,-,-,-,-,SCREW-MACHINE;-,PH,+,-,M3,L3,ZPC,-,YEL GEAR-WORM WHEEL;TS-10,POM,0.8,40,-,NAT,3 GEAR-FL CAM;TS-10,POM,0.8,59,-,BLK,48.48 SPRING-PINCH DRIVE;TS-10,SUS304-WPB,-,-, PLATE-JOINT;-,SECC20/20,T0.8,-,X-9 DAMPER-CAPSTAN;TS-10,POM,-,-,BLACK ASSY-CYLINDER;NTSC,CTS10,6HD-JUST ASSY-CYLINDER;NTSC,CTS10,4HD-JUST SCREW-ASS’Y MACH;WS,PH,+,M3.0,L6.0,ZPC(Y PLATE-GROUND DECK;TS-10,SPTE,T0.3,SLIDER-SUPPLY ASSY;-,X-9(TS),-,-,-,X-9 SLIDER-TAKE UP ASSY;-,X-9(TS),-,-,-,X-9 HEAD-ACE ASS’Y;-,PPS,TS-10,-,SCREW-ASS’Y TAPT;WSP,PH,+,M2.6,L5.0,ZPC( LEVER-#9 GUIDE ASS’Y;TS-10,-,-,-,-,-,-,SPRING-#9 GUIDE;-,ES,SUS304-WPB,OD3.1,0. HEAD-FE;-,-,HVFHPOO43A,-,LEVER-FL DOOR;TS-10,POM,-,-,-,-,NAT,LEVER-UNIT PINCH ASS’Y;TS-10,-,-,-,-,-,LEVER-HEAD CLEANER ASS’Y;TS-10,POM+URETH SLEEVE-HEAD CLEANER;-,POM,-,-,-,-,-,-,TS REEL-DISK S;X-9,POM,-,-,-,-,-,REEL-DISK T;X-9,POM,-,-,-,-,-,LEVER-IDLER;-,POM,-,-,-,-,-,GEAR-IDLE;TS-10,PET K3372,0.5,-,-,NTR,28 LEVER-TENSION ASS’Y;TS-10,SECC E20/20+SU SPRING-TENSION LEVER;TS-10,SUS304-WPB,-, BAND-BRAKE ASS’Y;TS-10,-,-,-,-,-,LEVER-S.BRAKE ASSY;-,POM+SUS,-,-,-,X-9 LEVER-T.BRAKE ASSY;-,POM+SUS,-,-,-,X-9 SPRING-BRAKE;TS-10,SUS304-WPB,-,-,-,-,-, SLIDER-FL DRIVE;TS-10,SECC E20/20,1.0,-, HOLDER-FL CASS. ASS’Y;TS-10,-,-,-,-,SPRING-FL.LEVER-LR;-,ES,SUS304 WPB,PI2.7 LEVER-FL ARM ASS’Y;TS-10,-,-,-,-,-,-,GUIDE-CASS. DOOR;X-9,POM,-,NTR,-,- Remark HI-FI MODEL MONO MODEL (OPTIONAL) (OPTIONAL) 3-5 Exploded View and Parts List 3-3 Mechanical Parts (Bottom Side) G542 B462 B456 B560 B460 B500 B458 B464 B501 B484 B488 B489 B468 K222 K200 K225 K221 B478 B570 3-6 Samsung Electronics Exploded View and Parts List Loc. No B456 B458 B460 B462 B464 B468 B478 B484 B488 B489 B500 B501 B560 B570 G542 K200 K221 K222 K225 Parts No. AC66-00009A AC66-00012A AC61-00090A AC60-10517A AC66-00019A AC66-00017A AC66-00016A AC66-00030A AC66-00023A AC66-00021A AC66-00024A AC66-00022A AC31-00010A AC60-10514A AC66-60051A AC61-21012A AC66-20581A AC60-30306A AC66-00006A Samsung Electronics Description ; Specification Remark GEAR-JOINT 1;TS-10,POM,1.5,17.5(22),-,NA GEAR-JOINT 2;TS-10,POM,1.0,23,-,BLK,24.6 BRACKET-GEAR;TS-10,0.8,-,SCREW-TAP TITE;-,PH,+,-,M2.6,L5,ZPC,-,YE SLIDER-CAM;TS-10,SECC E20/20,1.2,-,-,-,LEVER-PINCH DRIVE;TS-10,SECC E20/20,1.0 LEVER-TENSION DRIVE;TS-10,SECC E20/20,1 GEAR-LOADING DR. ASS’Y;TS-10,POM+SWPB,-, LEVER-S LOADING;TS-10,POM,-,-,-,-,NAT,LINK-LOADING S;TS-10,SECC E20/20,0.8,-,LEVER-T LOADING;TS-10,POM,-,-,-,-,NAT,LINK-LOADING T;TS-10,SECC E20/20,0.8,-,MOTOR-CAPSTAN;-,SANKYO,-,SCREW-CAPSTAN;-,PH,+,M2.6,L6,BELT-PULLEY;-,5CM-70,2 * 2,-,71.3,-,X-9 HOLDER-CLUTCH ASSY;-,-,-,-,-,X-9 GEAR-CENTER ASSY;-,POM,M=O.5,-,HIGHT T., WASHER-SLIT;-,-,ID2.1,OD5.0,T0.5,-,POLYS LEVER-UP DOWN;TS-10,POM,-,-,-,-,NAT,- 3-7 Exploded View and Parts List MEMO 3-8 Samsung Electronics 4. Electrical Parts List 4-1 VR9180/9160/8160/5160/9180C/9160C/8170C/8160C/5160C Only Loc.No Part No - - S.M.P.S. PARTS BD1SR1 3301-000297 BD1SS1 AC27-92001M BD1SS2 3301-000297 C1SD01 2201-000828 C1SD05 2201-000930 C1SD06 2301-000423 C1SR01 2401-001681 C1SR02 2401-000905 C1SR03 2401-001235 C1SR04 2301-000417 C1SR05 2301-000180 C1SR07 2305-001021 C1SS01 2401-003137 C1SS03 2201-000812 C1SS04 2201-000916 C1SS06 2401-000385 C1SS07 2401-002162 C1SS08 2401-001126 C1SS10 2401-001479 C1SS11 2301-000129 C1SS35 2401-003059 CN1SS1 3711-000178 D1SD01 0401-000101 D1SD02 0401-000101 D1SR01 0401-000101 D1SR02 0401-000101 D1SS01 0402-001196 D1SS02 0402-001196 D1SS03 0402-001196 D1SS04 0402-001196 D1SS05 0402-000012 D1SS06 0402-001194 D1SS07 0402-000431 D1SS08 0402-001195 F1SD01 3601-001122 IC1SS1 0604-001028 IC1SS2 AC14-12006D L1SS01 AC29-00003A L1SS02 AC27-12001N L1SS03 AC27-12001N PT1SD1 AC26-00002B Q1SR01 0501-000442 Q1SR02 0502-001123 R1SD01 2001-000490 R1SD02 2001-000515 R1SD03 2001-000429 R1SR01 2002-000320 R1SR02 2003-002117 R1SR03 2003-000314 R1SR04 2003-000314 R1SR05 2001-000003 R1SR06 2003-000119 R1SR07 2001-000734 R1SS01 2003-000994 R1SS02 2003-000994 Samsung Electronics Description ; Specification ASSY PCB-MAIN CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, INDUCTOR;70UH-M RT BFS3565R2F,-,-,-,CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, C-CERAMIC,DISC;3.3nF,20%,400V,Y5U,TP,15x C-CERAMIC,DISC;0.22nF,10%,500V,Y5P,TP,5. C-FILM,PEF;3.3nF,5%,100V,TP,7x10x4.5mm,5 C-AL;82uF,20%,200V,GP,TP,16x26,7.5m C-AL;22uF,20%,16V,BP,-,6x11,2.5mm C-AL;4.7uF,20%,250V,WT,TP,10x12.5,5 C-FILM,PEF;24nF,5%,50V,TP,6.5x10.5x4mm,5 C-FILM,PEF;18nF,0.05,100V,TP,7.2x4.5x8.0 C-FILM,MPEF;100nF,20%,275V,TP,17.5x7x13. C-AL;330UF,20%,50V,WT,TP,10X16MM,5 C-CERAMIC,DISC;2.2nF,20%,400V,Y5U,BK,12. C-CERAMIC,DISC;100pF,10%,400V,Y5U,TP,10x C-AL;10uF,20%,100V,GP,TP,6.3x11,5 C-AL;1000uF,20%,25V,WT,TP,10x20,5mm C-AL;330uF,20%,25V,WT,TP,10x12.5,5 C-AL;470uF,20%,10V,GP,TP,-,C-FILM,PEF;100nF,5%,50V,TP,10X9X4.3X5,5m C-AL;1000UF,20%,16V,WT,TP,10X16,5 CONNECTOR-HEADER;1WALL,2P,1R,3.96mm,STRA DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;UF4007,1KV,1A,DO-41,TP DIODE-RECTIFIER;UG2D,200V,2A,DO-204AC,TP DIODE-RECTIFIER;FML-M02S,200V,2.5A,TO-22 DIODE-RECTIFIER;F1T4,400V,1.0A,TS-1,TP FUSE-CARTRIDGE;250V,1.6A,FAST-ACTING,GLA PHOTO-COUPLER;TR,50-600%,250mW,DIP-4,ST IC;KA431Z,TO-92,TAPING FILTER LINE NOISE;-,20mH MIN,-,-,COIL-CHOKE;10UH-15%,RA,K-30,Q80,150KHZ,COIL-CHOKE;10UH-15%,RA,K-30,Q80,150KHZ,TRANS SWITCHING;-,-,EE2621,-,UL/CSA/DEMK TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 TR-POWER;KTC4419,NPN,30W,TO-220,ST,10-4 R-CARBON;200OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-COMPOSITION;1.8Mohm,10%,1/2W,AA,TP,3.5 R-METAL OXIDE(S);330Kohm,5%,1W,AA,TP,3.3 R-METAL OXIDE;47ohm,5%,2W,AE,TP,6x16mm R-METAL OXIDE;47ohm,5%,2W,AE,TP,6x16mm R-CARBON;330ohm,5%,1/8W,AA,TP,1.8x3.2mm R-METAL OXIDE;0.68ohm,5%,2W,AE,TP,6x16mm R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-METAL OXIDE(S);33Kohm,5%,2W,AF,TP,3.9x R-METAL OXIDE(S);33Kohm,5%,2W,AF,TP,3.9x Remark S.N.A. HIFI ONLY Loc.No R1SS04 R1SS05 R1SS06 VA1SS1 ZD1SR1 Part No Description ; Specification 2001-000429 2004-000869 2004-000459 1405-001026 0403-000571 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-METAL;3Kohm,1%,1/8W,AA,TP,1.8x3.2mm R-METAL;2.2Kohm,1%,1/8W,AA,TP,1.8x3.2m VARISTOR;470V,600A,9x7mm,TP DIODE-ZENER;UZP43B,43V,40-46V,1W,DO-41,T POWER PARTS C1P101 2401-001730 C1P103 2401-001254 C1P104 2401-001254 C1P105 2401-000598 C1P106 2401-002008 C1P108 2401-003107 C1P112 2401-001254 D1P101 0402-000127 D1P102 0402-000127 D1P106 0401-000101 D1P108 0401-000101 D1P109 0401-000101 L1P101 2701-000002 Q1P101 0501-000616 Q1P102 0501-000616 Q1P104 0501-000398 Q1P107 0501-000616 Q1P108 0504-000142 Q1P109 0501-000398 R1P101 2001-000855 R1P102 2001-000449 R1P103 2001-000515 R1P104 2001-000325 R1P104 2001-000554 R1P105 2001-000515 R1P110 2001-000362 ZD1P01 0403-000390 ZD1P02 0403-000717 ZD1P03 0403-000720 ZD1P05 0403-001211 C-AL;10uF,20%,50V,GP,TP,5x11,2.5 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;100uF,20%,16V,GP,TP,6.3x11,2.5 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm TR-SMALL SIGNAL;KSC2328A-Y,NPN,1W,TO-92L TR-SMALL SIGNAL;KSC2328A-Y,NPN,1W,TO-92L TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC2328A-Y,NPN,1W,TO-92L TR-DIGITAL;KSR2001,PNP,300MW,4.7K/4.7K,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T R-CARBON;560OHM,5%,1/4W,AA,TP,2.4X6.4MM R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;120OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;270OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;150OHM,5%,1/8W,AA,TP,1.8X3.2MM DIODE-ZENER;UZP33B,33V,31.4-34.6V,1W,DODIODE-ZENER;MTZJ5.1B,5.1V,4.94-5.2V,500m DIODE-ZENER;MTZJ9.1B,9.1V,8.57-9.01V,500 DIODE-ZENER;MTZJ12B,11.44-12.03V,500MW,D LOGIC PARTS C601 2203-000260 C602 2202-000797 C603 2203-000260 C604 2203-000260 C605 2401-000360 C606 2202-000797 C607 2203-000260 C608 2401-002165 C609 2203-000609 C610 2203-000989 C612 2203-000361 C613 2401-001545 C615 2202-000797 C616 2203-000192 C617 2401-002095 C618 2203-000634 C619 2203-000683 C620 2007-000029 C622 2401-000598 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;100uF,20%,50V,GP,TP,8x11.5,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.15nF,5%,50V,NP0,TP,2012 C-AL;47uF,20%,25V,GP,TP,6.3x7mm,2.5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;47uF,20%,25V,GP,TP,6.3x5,5 C-CERAMIC,CHIP;0.022nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;0.027nF,5%,50V,NP0,TP,201 R-CHIP;0OHM,5%,1/10W,DA,TP,2012 C-AL;1uF,20%,50V,GP,TP,4x7,5 Remark HIFI ONLY HIFI ONLY MONO ONLY HIFI ONLY MONO ONLY HIFI ONLY HIFI ONLY HIFI ONLY HIFI ONLY MONO ONLY MONO ONLY 4-1 Electrical Parts List Loc.No C623 C624 C625 C626 C627 C628 C629 C630 C631 C632 C633 C634 C635 C636 C637 C638 C639 C640 C643 C644 C646 C647 C648 C649 C650 C651 C652 C653 C655 C656 CN601 CN604 CN605 D601 D603 D604 D605 D606 D607 IC601 IC602 IC603 IC6B1 L601 L602 L802 LD601 PT601 PT602 R601 R602 R603 R604 R605 R606 R607 R608 R609 R610 R613 R614 R615 R616 R617 R618 R619 4-2 Part No 2202-000121 2401-002165 2203-000192 2203-000192 2203-001245 2401-002068 2203-001579 2401-003107 2203-000192 2203-001077 2203-000716 2203-001077 2203-000260 2203-000260 2203-000609 2203-000609 2203-000609 2203-000192 2203-000260 2203-000260 2203-000192 2203-000192 2203-000192 2203-000444 2203-000727 2203-000727 2203-000260 2203-000575 2202-000797 2203-000844 AC39-20817S 3711-003749 3708-001302 0401-000101 0402-000127 0402-000127 0401-000101 0402-000127 0402-000127 AC09-00197A 1003-001318 1103-001148 AC14-12006C 3301-000297 2701-000002 3301-000297 0601-000517 0604-001122 0604-001122 2007-000586 2007-000572 2007-000586 2007-000572 2001-000111 2001-000522 2007-000738 2001-000429 2001-000429 2001-000429 2001-000290 2001-000429 2007-000981 2001-000429 2007-000221 2007-001039 2001-000290 Description ; Specification C-CERAMIC,MLC-AXIAL;100pF,10%,50V,Y5P,TP C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;0.082nF,5%,50V,NP0,TP,201 C-AL;33uF,20%,16V,GP,TP,5x11,5 C-CERAMIC,CHIP;15nF,10%,50V,NP0,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;0.056nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;3.3nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.056nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;1nF,10%,50V,X7R,TP,2012,C-CERAMIC,CHIP;3.9nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;3.9nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;220NF,10%,25V,X7R,TP,2012 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;39nF,10%,50V,X7R,TP,2012, LEAD CONNECTOR-ASSY;DP,SMH200-02,YBH200CONNECTOR-HEADER;BOX,8P,2R,2mm,STRAIGHT, CONNECTOR-FPC/FC/PIC;7P,1.25mm,STRAIGHT, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP IC MICOM;MN101D02D-CP1,VR8170,100P,5V,1 IC-MOTOR DRIVER;LB11880,DIP,30P,417MIL,IC-EEPROM;24C021,2KBIT,DIP,8P,300MIL,10M IC;KA7533,DIP,CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, LED-IR;RECTANGULA,4x6.0mm,75mW,6V,950 PHOTO-INTERRUPTER;TR,0.065%,150mW,DIP-4, PHOTO-INTERRUPTER;TR,0.065%,150mW,DIP-4, R-CHIP;22KOHM,5%,1/10W,DA,TP,2012 R-CHIP;220OHM,5%,1/10W,DA,TP,2012 R-CHIP;22KOHM,5%,1/10W,DA,TP,2012 R-CHIP;220OHM,5%,1/10W,DA,TP,2012 R-CARBON;150OHM,5%,1/4W,AA,TP,2.4X6.4MM R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;30KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;5.6KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;56KOHM,5%,1/10W,DA,TP,2012 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM Remark Loc.No R620 R621 R622 R623 R624 R630 R631 R632 R634 R635 R637 R638 R639 R641 R642 R643 R644 R645 R646 R647 R648 R649 R650 R651 R652 R653 R656 R660 R664 R665 R668 R669 R690 R691 R692 R6A01 R6F2 R6F3 R6F4 R6JS01 R6JS02 R6JS03 R6JS04 R6JS07 R6JS08 R6JS09 R6JS10 S601 S602 SW602 SW603 XT601 Part No 2001-000290 2007-000931 2007-000931 2007-000300 2007-000300 2001-000864 2001-000864 2001-000786 2007-000068 2001-000429 2001-000281 2001-000591 2007-000518 2001-000429 2001-000429 2007-000300 2007-000300 2007-000300 2007-000981 2007-000766 2007-000766 2007-000872 2007-000872 2007-000872 2007-000300 2001-000429 2007-000300 2007-000001 2007-000703 2007-000282 2003-000111 2007-001024 2001-000429 2001-000429 2001-000429 2001-000290 2001-000786 2007-001141 2007-001141 2007-000546 2007-000546 2007-000546 2007-000546 2001-000273 2001-000273 2001-000290 2001-000290 0603-001011 0603-001011 AC34-20100B AC34-20100A 2801-001384 AUDIO/VIDEO PARTS C301 2401-000598 C302 2203-001721 C303 2203-000192 C304 2202-000164 C305 2401-000598 C306 2203-000192 C307 2401-003107 C308 2401-000918 C309 2401-000414 C310 2401-001915 C311 2401-000414 C312 2202-002037 Description ; Specification R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;470OHM,5%,1/10W,DA,TP,2012 R-CHIP;470OHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;56KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;56KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;470KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;3.3KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;2.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;5.6KOHM,5%,1/10W,DA,TP,2012 R-CHIP;330OHM,5%,1/10W,DA,TP,2012 R-CHIP;330OHM,5%,1/10W,DA,TP,2012 R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;68KOHM,5%,1/10W,DA,TP,2012 R-CHIP;3.6KOHM,5%,1/10W,DA,TP,2012 R-CHIP;100KOHM,5%,1/10W,DA,TP,2012 R-METAL OXIDE;0.47ohm,5%,1W,AD,TP,4.3x12 R-CHIP;560KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;7.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;7.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;20KOHM,5%,1/10W,DA,TP,2012 R-CHIP;20KOHM,5%,1/10W,DA,TP,2012 R-CHIP;20KOHM,5%,1/10W,DA,TP,2012 R-CHIP;20KOHM,5%,1/10W,DA,TP,2012 R-CARBON;100KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;100KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM PHOTO-TR;NPN,35V,6V,50mA,75mW,BK PHOTO-TR;NPN,35V,6V,50mA,75mW,BK SWITCH-REC;-,-,X-9,SWITCH-MODE;-,-,X-9,CRYSTAL-UNIT;14.31818MHz,30ppm,28-AAA,16 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;360pF,5%,50V,NPO,TP,2012, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,MLC-AXIAL;0.18nF,10%,50V,Y5P,T C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-AL;22uF,20%,16V,GP,-,6.3x7,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,3x5,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V Remark F-A/V(AUTO) ONLY HIFI ONY HIFI ONY HIFI ONY VR9180/9180C ONLY VR9180/9180C ONLY VR9180/9180C ONLY VR9180/9180C ONLY VR9180/9180C ONLY VR9180/9180C ONLY VR9180/9180C ONLY VR9180/9180C ONLY SQPB ONLY F-A/V ONLY Samsung Electronics Electrical Parts List Loc.No C313 C314 C315 C316 C317 C318 C319 C320 C321 C322 C323 C324 C325 C326 C327 C328 C329 C330 C331 C332 C333 C334 C335 C336 C337 C338 C340 C341 C342 C343 C344 C345 C346 C347 C348 C349 C350 C351 C352 C353 C354 C356 C357 C358 C359 C360 C364 C371 C372 C399 CN301 CN301 CN302 CN303 FL301 IC301 L301 L302 L303 L304 L305 L306 L307 Q302 Q303 Q304 Part No 2401-000414 2203-000476 2401-000598 2401-000598 2401-001915 2202-000797 2202-000797 2203-000260 2401-003107 2202-002037 2401-000598 2203-000260 2401-000598 2203-000609 2401-001915 2401-003107 2203-000192 2203-000192 2203-000989 2203-000989 2203-000989 2401-003107 2203-000192 2202-002037 2401-003107 2203-000192 2401-000918 2202-002037 2401-001169 2203-000192 2203-001214 2203-000260 2401-000414 2203-000495 2203-001132 2401-001254 2301-001014 2203-001214 2203-000260 2401-001254 2202-000797 2401-002144 2301-000253 2202-000797 2203-000260 2203-000260 2203-000260 2203-001077 2203-000260 2401-003107 3708-000391 3708-000394 3710-001648 3708-001165 AC27-80100C 1204-001755 3301-000297 3301-000297 3301-000297 3301-000297 3301-000297 2702-000120 2701-000002 0501-000303 0501-000398 0501-000303 Samsung Electronics Description ; Specification C-AL;10uF,20%,16V,GP,TP,4x7,5 C-CERAMIC,CHIP;1000nF,+80-20%,16V,Y5V,TP C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,3x5,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-AL;1uF,20%,50V,GP,TP,3x5,5 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;22uF,20%,16V,GP,-,6.3x7,5 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-AL;33uF,20%,16V,GP,-,6.3x7,2.5mm C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;8.2nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-CERAMIC,CHIP;2.2nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.68nF,5%,50V,NP0,TP,2012 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-FILM,PEF;6.8nF,5%,50V,TP,7x3x6,5mm C-CERAMIC,CHIP;8.2nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-AL;47uF,20%,16V,GP,TP,5x11,5 C-FILM,PEF;39NF,5%,100V,TP,7.5X4.5X12.5M C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.056nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x7,5 CONNECTOR-FPC/FC/PIC;10P,1.25MM,STRAIGHT CONNECTOR-FPC/FC/PIC;6P,1.25mm,STRAIGHT, CONNECTOR-SOCKET;2P,1R,2.5mm,STRAIGHT,SN CONNECTOR-FPC/FC/PIC;6P,1.25mm,STRAIGHT, COIL-OSC;7mm,2.4mH,IC-VIDEO PROCESS;LA71200M,QFP,80P,-,PLAS CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, INDUCTOR-RADIAL;15mH,5%,6.2x7.4mm INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T Remark HIFI ONLY MONO ONLY Loc.No Part No Description ; Specification Q305 Q306 Q307 Q308 R301 R302 R303 R304 R305 R308 R309 R310 R311 R312 R313 R314 R315 R316 R317 R318 R319 R320 R320 R322 R322 R326 R327 R328 R329 R330 R331 R332 R333 R334 R335 R336 R337 R338 R339 R340 R341 R342 R343 R344 R345 R346 R347 XT301 0501-000442 0501-000303 0501-000442 0501-000442 2007-000409 2007-001055 2007-000267 2007-000267 2001-000734 2007-000565 2001-000004 2001-000449 2007-001113 2007-000221 2001-000258 2007-000241 2007-001177 2007-000300 2001-000411 2001-000411 2001-000290 2007-000221 2007-000241 2001-000613 2001-000812 2007-000221 2007-000981 2007-000300 2007-000757 2007-000572 2007-000653 2007-000468 2001-000221 2007-000586 2007-000931 2007-000267 2001-000458 2001-000405 2001-000429 2001-000429 2001-000522 2007-000300 2007-001001 2007-001001 2007-001118 2007-001118 2007-000941 2801-003610 TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 R-CHIP;15KOHM,5%,1/10W,DA,TP,2012 R-CHIP;6.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.8KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.8KOHM,5%,1/10W,DA,TP,2012 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;220KOHM,5%,1/10W,DA,TP,2012 R-CARBON;200KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;680KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1.8KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;1.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;8.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;18KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;18KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.5KOHM,5%,1/10W,DA,TP,2012 R-CARBON;3.9KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;5.6KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;5.6KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;330KOHM,5%,1/10W,DA,TP,2012 R-CHIP;220OHM,5%,1/10W,DA,TP,2012 R-CHIP;27KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;22KOHM,5%,1/10W,DA,TP,2012 R-CHIP;470OHM,5%,1/10W,DA,TP,2012 R-CHIP;1.8KOHM,5%,1/10W,DA,TP,2012 R-CARBON;2.2OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;180OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;510OHM,5%,1/10W,DA,TP,2012 R-CHIP;510OHM,5%,1/10W,DA,TP,2012 R-CHIP;680OHM,5%,1/10W,DA,TP,2012 R-CHIP;680OHM,5%,1/10W,DA,TP,2012 R-CHIP;47KOHM,5%,1/10W,DA,TP,2012 CRYSTAL-UNIT;3.579545MHz,8ppm,28-AAA,S,1 TM-BLOCK C401 C405 C406 C407 C409 C410 R401 R402 SW401 TM401 2203-000260 2401-002144 2202-000797 2203-000609 2202-002037 2202-000807 2007-000931 2007-000931 3408-001042 AC40-00007A C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x11,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-CERAMIC,MLC-AXIAL;22nF,+80-20%,25V,Y5V R-CHIP;470OHM,5%,1/10W,DA,TP,2012 R-CHIP;470OHM,5%,1/10W,DA,TP,2012 SWITCH-SLIDE;DC 12V,100mA,-,OFF-ON,TM-BLOCK;115VD025AP,NTSC-M,115VD025AP,Y Remark MONO ONLY HIFI ONLY HIFI ONLY MONO ONLY F-AV ONLY HI-FI PARTS(HI-FI MODEL ONLY) C501 2203-000192 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C502 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 C503 2401-001254 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C504 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 4-3 Electrical Parts List Loc.No C505 C506 C507 C508 C509 C510 C511 C512 C513 C514 C515 C516 C517 C518 C519 C520 C521 C522 C523 C526 C527 C528 C529 C530 C531 C532 C533 C534 C535 C536 C537 C538 C540 C541 C542 C543 C544 D503 IC501 L501 L502 L503 L504 R501 R503 R506 R507 R510 R511 R512 R513 R514 R515 R516 R517 R518 R519 R520 R521 R522 R525 R527 R530 R531 Part No 2401-001254 2401-000598 2401-001169 2401-000414 2401-000414 2301-000224 2203-000192 2203-000126 2202-000797 2202-000797 2203-000192 2401-003107 2203-000192 2401-000598 2401-001931 2301-000224 2401-000414 2401-000414 2401-001169 2401-001254 2401-001931 2401-001020 2401-000598 2203-000192 2401-003107 2203-000192 2203-000192 2203-000192 2401-000414 2401-001919 2401-000414 2202-000797 2401-003107 2203-000192 2401-000414 2301-000224 2401-000414 0401-000101 1204-001754 2702-000108 3301-000297 3301-000297 2701-000126 2007-001141 2007-001141 2007-000774 2007-000468 2001-000005 2007-000872 2001-000005 2007-000872 2001-000780 2007-001055 2001-000780 2007-000804 2007-001224 2001-000786 2001-000786 2001-000472 2007-000518 2001-000472 2007-000300 2001-000347 2001-000290 INPUT-OUTPUT PARTS 4-4 Description ; Specification C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;33uF,20%,16V,GP,-,6.3x7,2.5mm C-AL;10uF,20%,16V,GP,TP,4x7,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x13mm,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;1.2nF,10%,50V,X7R,TP,2012 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;220nF,20%,50V,-,TP,4x7mm,5 C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x13mm,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-AL;33uF,20%,16V,GP,-,6.3x7,2.5mm C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-AL;220nF,20%,50V,-,TP,4x7mm,5 C-AL;3.3UF,20%,50V,GP,TP,4X7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;10uF,20%,16V,GP,TP,4x7,5 C-AL;2.2uF,20%,50V,-,TP,4x7mm,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;10uF,20%,16V,GP,TP,4x7,5 C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x13mm,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 DIODE-SWITCHING;1N4148,100V,200mA,DO-35, IC-SIGNAL PROCESSOR;AN3663FBP,QFP,64P,-, INDUCTOR-RADIAL;100uH,5%,6x6.4mm CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, INDUCTOR-AXIAL;150uH,5%,2.4x3.4mm R-CHIP;7.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;7.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;33KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1KOHM,5%,1/10W,DA,TP,2012 R-CARBON;390ohm,5%,1/8W,AA,TP,1.8x3.2mm R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;390ohm,5%,1/8W,AA,TP,1.8x3.2mm R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;6.2KOHM,5%,1/10W,DA,TP,2012 R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;36KOHM,5%,1/10W,DA,TP,2012 R-CHIP;9.1KOHM,5%,1/10W,DA,TP,2012 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;2.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;2.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;2.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;13KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM Remark Loc.No C801 C802 C803 C805 C8F1 C8M2 JK801 JK801 Q801 R801 R802 R803 R804 R8F1 R8M1 R8M2 R8M3 R8MF2 Part No 2401-003107 2401-001479 2401-002144 2401-000438 2202-002037 2203-000802 AC37-20001G AC37-20001H 0501-000303 2001-000969 2001-000025 2001-001026 2007-001166 2001-000786 2007-000941 2007-001224 2001-000786 2007-000981 FUNCTION/DISPLAY PARTS C701 2203-000444 C702 2203-000260 C703 2401-002165 CN701 3711-004414 CN703 3711-004414 CN703 3711-004625 D701 0401-000101 D702 0401-000101 D704 0401-000101 D705 0401-000101 D706 0401-000101 D707 0401-000101 D708 0401-000101 DT701 0703-001094 Q701 0501-000290 Q702 0501-000290 Q703 0501-000290 Q704 0501-000290 Q705 0501-000290 Q706 0501-000398 Q707 0501-000398 Q708 0501-000398 Q709 0501-000398 Q710 0501-000398 Q711 0501-000398 Q712 0501-000398 Q713 0501-000398 Q714 0501-000290 Q715 0501-000290 R701 2007-000493 R702 2007-000493 R703 2007-000300 R704 2001-000449 R705 2001-000449 R706 2001-000449 R707 2001-000449 R708 2001-000290 R709 2001-000290 R710 2001-000969 R711 2001-000969 R712 2001-000290 R713 2001-000969 R714 2001-000290 R715 2001-000969 R716 2001-000290 R717 2001-000969 Description ; Specification Remark C-AL;47uF,20%,16V,GP,TP,5x7,5 C-AL;470uF,20%,10V,GP,TP,-,C-AL;47uF,20%,16V,GP,TP,5x11,5 C-AL;10uF,20%,25V,GP,-,5x11,2mm C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V F-A/V ONLY C-CERAMIC,CHIP;33nF,10%,50V,X7R,TP,2012 MONO ONLY JACK-RCA;DPAE-,6P,HIFI,PI3.3 HIFI ONLY JACK-RCA;DPAM-,4P,MONO,PI3.3 MONO ONLY TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/4W,AA,TP,2.4X6.4MM R-CARBON;910OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;75OHM,5%,1/10W,DA,TP,2012 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM F-A/V ONLY R-CHIP;47KOHM,5%,1/10W,DA,TP,2012 MONO ONLY R-CHIP;9.1KOHM,5%,1/10W,DA,TP,2012 MONO ONLY R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM MONO ONLY R-CHIP;5.6KOHM,5%,1/10W,DA,TP,2012 F-A/V(MONO) ONLY C-CERAMIC,CHIP;1nF,10%,50V,X7R,TP,2012,C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 CONNECTOR-HEADER;3WALL,13P,1R,2mm,STRAIG CONNECTOR-HEADER;3WALL,13P,1R,2mm,STRAIG VR9180/9180C ONLY CONNECTOR-HEADER;3WALL,8P,1R,2mm,STRAIGH VR9180/9180C ONLY DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, LED DISPLAY;GRN,7,8,50x18.5mm TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 R-CHIP;2.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;2.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM Samsung Electronics Electrical Parts List Loc.No Part No Description ; Specification R718 R719 R720 R721 R722 R723 R724 R741 R743 R744 R745 RM701 W7004 2001-000290 2001-000969 2001-000290 2001-000969 2001-000290 2001-000969 2007-000493 2001-000734 2001-000734 2001-000734 2001-000969 AC32-00002A 2001-000515 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;2.2KOHM,5%,1/10W,DA,TP,2012 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM MODULE-REMOCON;-,GP1U291Q,38KHZ,-,7.3X13 R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM CN702 JK702 JK702 SW701 SW702 SW703 SW704 SW705 SW706 SW707 SW709 SW710 SW711 SW715 SW716 3710-001626 AC37-22002G AC37-22002J 3404-001076 3404-001076 3404-001076 3404-001076 3404-001076 3404-001076 3404-001076 3404-001076 3404-001076 3404-001076 3404-000165 3404-000165 CONNECTOR-SOCKET;8P,1R,2mm,ANGLE,SN JACK-PIN;3.2mm,DPSE-9813,3P,13mm,ARREY JACK-PIN;3.2mm,DPSE-9814,2P,13mm,S/W SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,16gf+-50gf,6x6mm,SP SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST CN704 CN705 JK701 JS701 SW721 SW722 SW723 SW724 SW725 SW726 SW727 SW728 SW729 SW730 SW731 SW735 SW736 SW737 3710-001563 3710-001563 AC37-00006A AC64-00602A 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 3404-000165 ASSY-FUNCTION;VR9180/XAA,TS-10,SEA,J/S CONNECTOR-SOCKET;13P,1R,2mm,ANGLE,SN CONNECTOR-SOCKET;13P,1R,2mm,ANGLE,SN JACK—PIN;3.2MM,DPSE-9872,3P,ARREY,10MM DIAL-J/S;J/S DIAL,MOLD,8PIN,BLACK,DJS-1 SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST Samsung Electronics Remark Loc.No Part No Description ; Specification Remark F-A/V ONLY F-A/V ONLY VR8170C/8160 ONLY VR8170C/8160 ONLY VR5160 ONLY S.N.A. 4-5 Electrical Parts List 4-2 VR8140C/5140C Only Loc.No Part No - - S.M.P.S. PARTS BD1SS1 AC27-92001M BD1SS2 3301-000297 BD1SS3 3301-000297 C1SD01 2201-000828 C1SD05 2201-000930 C1SD06 2301-000423 C1SR01 2401-001681 C1SR02 2401-000905 C1SR03 2401-001235 C1SR04 2301-000417 C1SR05 2301-000180 C1SR07 2305-001021 C1SS01 2401-003137 C1SS03 2201-000812 C1SS04 2201-000916 C1SS06 2401-000385 C1SS07 2401-002162 C1SS08 2401-001126 C1SS10 2401-001479 C1SS11 2301-000129 C1SS35 2401-003059 CN1SS1 3711-000178 D1SD01 0402-001195 D1SR01 0401-000101 D1SR02 0401-000101 D1SS01 0402-001196 D1SS02 0402-001196 D1SS03 0402-001196 D1SS04 0402-001196 D1SS05 0402-000012 D1SS06 0402-001194 D1SS07 0402-000431 D1SS08 0402-001195 F1SD01 3601-001122 IC1SS1 0604-001028 IC1SS2 AC14-12006D L1SS01 AC29-00003A L1SS02 AC27-12001N L1SS03 AC27-12001N PT1SD1 AC26-00002B Q1SR01 0501-000442 Q1SR02 0502-001123 R1SD01 2001-000490 R1SD02 2001-000515 R1SD03 2001-000429 R1SD04 2003-000314 R1SR01 2002-000320 R1SR02 2003-002117 R1SR03 2003-000314 R1SR05 2001-000003 R1SR06 2003-000119 R1SR07 2001-000734 R1SS01 2003-000994 R1SS02 2003-000994 R1SS04 2001-000429 R1SS05 2004-000869 R1SS06 2004-000459 VA1SS1 1405-001026 4-6 Description ; Specification ASSY PCB-MAIN INDUCTOR;70UH-M RT BFS3565R2F,-,-,-,CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, C-CERAMIC,DISC;3.3nF,20%,400V,Y5U,TP,15x C-CERAMIC,DISC;0.22nF,10%,500V,Y5P,TP,5. C-FILM,PEF;3.3nF,5%,100V,TP,7x10x4.5mm,5 C-AL;82uF,20%,200V,GP,TP,16x26,7.5m C-AL;22uF,20%,16V,BP,-,6x11,2.5mm C-AL;4.7uF,20%,250V,WT,TP,10x12.5,5 C-FILM,PEF;24nF,5%,50V,TP,6.5x10.5x4mm,5 C-FILM,PEF;18nF,0.05,100V,TP,7.2x4.5x8.0 C-FILM,MPEF;100nF,20%,275V,TP,17.5x7x13. C-AL;330UF,20%,50V,WT,TP,10X16MM,5 C-CERAMIC,DISC;2.2nF,20%,400V,Y5U,BK,12. C-CERAMIC,DISC;100pF,10%,400V,Y5U,TP,10x C-AL;10uF,20%,100V,GP,TP,6.3x11,5 C-AL;1000uF,20%,25V,WT,TP,10x20,5mm C-AL;330uF,20%,25V,WT,TP,10x12.5,5 C-AL;470uF,20%,10V,GP,TP,-,C-FILM,PEF;100nF,5%,50V,TP,10X9X4.3X5,5m C-AL;1000UF,20%,16V,WT,TP,10X16,5 CONNECTOR-HEADER;1WALL,2P,1R,3.96mm,STRA DIODE-RECTIFIER;F1T4,400V,1.0A,TS-1,TP DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;1T5,600V,1A,TS-1,TP DIODE-RECTIFIER;UF4007,1KV,1A,DO-41,TP DIODE-RECTIFIER;UG2D,200V,2A,DO-204AC,TP DIODE-RECTIFIER;FML-M02S,200V,2.5A,TO-22 DIODE-RECTIFIER;F1T4,400V,1.0A,TS-1,TP FUSE-CARTRIDGE;250V,1.6A,FAST-ACTING,GLA PHOTO-COUPLER;TR,50-600%,250mW,DIP-4,ST IC;KA431Z,TO-92,TAPING FILTER LINE NOISE;-,20mH MIN,-,-,COIL-CHOKE;10UH-15%,RA,K-30,Q80,150KHZ,COIL-CHOKE;10UH-15%,RA,K-30,Q80,150KHZ,TRANS SWITCHING;-,-,EE2621,-,UL/CSA/DEMK TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 TR-POWER;KTC4419,NPN,30W,TO-220,ST,10-4 R-CARBON;200OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-METAL OXIDE;47ohm,5%,2W,AE,TP,6x16mm R-COMPOSITION;1.8Mohm,10%,1/2W,AA,TP,3.5 R-METAL OXIDE(S);330Kohm,5%,1W,AA,TP,3.3 R-METAL OXIDE;47ohm,5%,2W,AE,TP,6x16mm R-CARBON;330ohm,5%,1/8W,AA,TP,1.8x3.2mm R-METAL OXIDE;0.68ohm,5%,2W,AE,TP,6x16mm R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-METAL OXIDE(S);33Kohm,5%,2W,AF,TP,3.9x R-METAL OXIDE(S);33Kohm,5%,2W,AF,TP,3.9x R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-METAL;3Kohm,1%,1/8W,AA,TP,1.8x3.2mm R-METAL;2.2Kohm,1%,1/8W,AA,TP,1.8x3.2m VARISTOR;470V,600A,9x7mm,TP Remark S.N.A. Loc.No Part No Description ; Specification POWER PARTS C1P101 2401-001730 C1P103 2401-001254 C1P104 2401-001254 C1P105 2401-000598 C1P106 2401-000598 C1P108 2401-003107 C1P109 2401-003107 C1P112 2401-001254 D1P101 0402-000127 D1P102 0402-000127 D1P106 0401-000101 D1P108 0401-000101 D1P109 0401-000101 L1P101 2701-000002 Q1P101 0501-000616 Q1P102 0501-000616 Q1P104 0501-000398 Q1P107 0501-000616 Q1P108 0504-000142 Q1P109 0501-000398 R1P101 2001-000855 R1P102 2001-000449 R1P103 2001-000515 R1P104 2001-000515 R1P110 2001-000515 R1P111 2001-000734 R1P112 2001-000290 ZD1P01 0403-000390 ZD1P02 0403-000717 ZD1P03 0403-000720 ZD1P05 0403-001211 ZD1SR1 0403-000571 C-AL;10uF,20%,50V,GP,TP,5x11,2.5 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm TR-SMALL SIGNAL;KSC2328A-Y,NPN,1W,TO-92L TR-SMALL SIGNAL;KSC2328A-Y,NPN,1W,TO-92L TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC2328A-Y,NPN,1W,TO-92L TR-DIGITAL;KSR2001,PNP,300MW,4.7K/4.7K,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T R-CARBON;560OHM,5%,1/4W,AA,TP,2.4X6.4MM R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM DIODE-ZENER;UZP33B,33V,31.4-34.6V,1W,DODIODE-ZENER;MTZJ5.1B,5.1V,4.94-5.2V,500m DIODE-ZENER;MTZJ9.1B,9.1V,8.57-9.01V,500 DIODE-ZENER;MTZJ12B,11.44-12.03V,500MW,D DIODE-ZENER;UZP43B,43V,40-46V,1W,DO-41,T LOGIC PARTS C601 2203-000260 C602 2202-000797 C603 2203-000260 C604 2203-000260 C605 2401-000360 C606 2202-000797 C607 2203-000260 C608 2401-002165 C609 2203-000609 C610 2203-000989 C612 2203-000361 C613 2401-001545 C615 2202-000797 C616 2203-000192 C617 2401-002095 C618 2203-000634 C619 2203-000683 C620 2203-000683 C621 2203-000634 C622 2401-000598 C623 2202-000121 C624 2401-002165 C625 2203-000192 C626 2203-000192 C627 2203-001245 C628 2401-002068 C629 2203-001579 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;100uF,20%,50V,GP,TP,8x11.5,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.15nF,5%,50V,NP0,TP,2012 C-AL;47uF,20%,25V,GP,TP,6.3x7mm,2.5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;47uF,20%,25V,GP,TP,6.3x5,5 C-CERAMIC,CHIP;0.022nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;0.027nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;0.027nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;0.022nF,5%,50V,NP0,TP,201 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;100pF,10%,50V,Y5P,TP C-AL;100uF,20%,16V,GP,TP,6.3x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;0.082nF,5%,50V,NP0,TP,201 C-AL;33uF,20%,16V,GP,TP,5x11,5 C-CERAMIC,CHIP;15nF,10%,50V,NP0,TP,2012 Remark Samsung Electronics Electrical Parts List Loc.No C630 C631 C632 C633 C634 C635 C636 C637 C638 C639 C640 C643 C644 C646 C647 C648 C649 C650 C651 C652 C653 C655 C656 C6B01 CN601 CN604 CN605 D601 D603 D604 D605 D606 D607 IC601 IC602 IC603 IC6B1 L601 L602 LD601 PT601 PT602 R601 R602 R603 R604 R605 R606 R607 R608 R609 R610 R613 R614 R615 R616 R617 R618 R619 R620 R621 R622 R623 R624 R630 R631 Part No 2401-003107 2203-000192 2203-001077 2203-000716 2203-001077 2203-000260 2203-000260 2203-000609 2203-000609 2203-000609 2203-000192 2203-000260 2203-000260 2203-000192 2203-000192 2203-000192 2203-000444 2203-000727 2203-000727 2203-000260 2203-000575 2202-000797 2203-000844 2401-000199 AC39-20817S 3711-003749 3708-001302 0401-000101 0402-000127 0402-000127 0401-000101 0402-000127 0402-000127 AC09-00197A 1003-001318 1103-001148 AC14-12006C 3301-000297 2701-000002 0601-000517 0604-001122 0604-001122 2007-000586 2007-000572 2007-000586 2007-000572 2001-000111 2001-000522 2007-000738 2001-000429 2001-000734 2001-000734 2001-000290 2001-000429 2007-000981 2001-000429 2007-000221 2007-001039 2001-000290 2001-000290 2007-000931 2007-000931 2001-000290 2001-000290 2001-000864 2001-000864 Samsung Electronics Description ; Specification C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;0.056nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;3.3nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.056nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;1nF,10%,50V,X7R,TP,2012,C-CERAMIC,CHIP;3.9nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;3.9nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;220NF,10%,25V,X7R,TP,2012 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;39nF,10%,50V,X7R,TP,2012, C-AL;1000uF,20%,6.3V,GP,TP,10x12.5, LEAD CONNECTOR-ASSY;DP,SMH200-02,YBH200CONNECTOR-HEADER;BOX,8P,2R,2mm,STRAIGHT, CONNECTOR-FPC/FC/PIC;7P,1.25mm,STRAIGHT, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP DIODE-RECTIFIER;1N4002,100V,1A,DO-41,TP IC MICOM;MN101D02D-CP1,VR8170,100P,5V,1 IC-MOTOR DRIVER;LB11880,DIP,30P,417MIL,IC-EEPROM;24C021,2KBIT,DIP,8P,300MIL,10M IC;KA7533,DIP,CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm LED-IR;RECTANGULA,4x6.0mm,75mW,6V,950 PHOTO-INTERRUPTER;TR,0.065%,150mW,DIP-4, PHOTO-INTERRUPTER;TR,0.065%,150mW,DIP-4, R-CHIP;22KOHM,5%,1/10W,DA,TP,2012 R-CHIP;220OHM,5%,1/10W,DA,TP,2012 R-CHIP;22KOHM,5%,1/10W,DA,TP,2012 R-CHIP;220OHM,5%,1/10W,DA,TP,2012 R-CARBON;150OHM,5%,1/4W,AA,TP,2.4X6.4MM R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;30KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;5.6KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;56KOHM,5%,1/10W,DA,TP,2012 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;470OHM,5%,1/10W,DA,TP,2012 R-CHIP;470OHM,5%,1/10W,DA,TP,2012 R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;56KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;56KOHM,5%,1/8W,AA,TP,1.8X3.2MM Remark Loc.No R632 R633 R634 R635 R637 R638 R639 R641 R642 R643 R644 R645 R646 R647 R648 R649 R650 R651 R652 R653 R656 R660 R664 R665 R668 R669 R690 R691 R692 R6B01 S601 S602 SW602 SW603 XT601 XT602 Part No 2001-000786 2007-000565 2007-000068 2001-000429 2001-000281 2001-000591 2007-000518 2001-000429 2001-000429 2007-000300 2007-000300 2007-000300 2007-000981 2007-000766 2007-000766 2007-000872 2007-000872 2007-000872 2007-000300 2001-000429 2007-000300 2007-000001 2007-000703 2007-000282 2003-000111 2007-001024 2001-000429 2001-000429 2001-000429 2001-000458 0603-001011 0603-001011 AC34-20100B AC34-20100A 2801-001384 2801-003318 AUDIO/VIDEO PARTS C301 2401-000598 C302 2203-001721 C303 2007-000029 C304 2202-000164 C305 2401-000598 C306 2203-000192 C307 2401-003107 C308 2401-000918 C309 2401-000414 C310 2401-000598 C312 2202-002037 C313 2401-000414 C314 2203-000476 C315 2401-000598 C316 2401-000598 C317 2401-000598 C318 2202-000797 C319 2202-000797 C320 2203-000260 C321 2401-003107 C322 2202-002037 C323 2401-000598 C324 2203-000260 C325 2401-000598 C326 2203-000609 C327 2401-001915 C328 2401-003107 C329 2203-000192 Description ; Specification Remark R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;220KOHM,5%,1/10W,DA,TP,2012 R-CHIP;470KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;3.3KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;2.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;5.6KOHM,5%,1/10W,DA,TP,2012 R-CHIP;330OHM,5%,1/10W,DA,TP,2012 R-CHIP;330OHM,5%,1/10W,DA,TP,2012 R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;68KOHM,5%,1/10W,DA,TP,2012 R-CHIP;3.6KOHM,5%,1/10W,DA,TP,2012 R-CHIP;100KOHM,5%,1/10W,DA,TP,2012 R-METAL OXIDE;0.47ohm,5%,1W,AD,TP,4.3x12 R-CHIP;560KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;2.2OHM,5%,1/8W,AA,TP,1.8X3.2MM PHOTO-TR;NPN,35V,6V,50mA,75mW,BK PHOTO-TR;NPN,35V,6V,50mA,75mW,BK SWITCH-REC;-,-,X-9,SWITCH-MODE;-,-,X-9,CRYSTAL-UNIT;14.31818MHz,30ppm,28-AAA,16 CRYSTAL-UNIT;32.768KHz,20ppm,28-AAP,12.5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;360pF,5%,50V,NPO,TP,2012, R-CHIP;0OHM,5%,1/10W,DA,TP,2012 C-CERAMIC,MLC-AXIAL;0.18nF,10%,50V,Y5P,T C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-AL;22uF,20%,16V,GP,-,6.3x7,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-AL;10uF,20%,16V,GP,TP,4x7,5 C-CERAMIC,CHIP;1000nF,+80-20%,16V,Y5V,TP C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 C-AL;1uF,20%,50V,GP,TP,3x5,5 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, 4-7 Electrical Parts List Loc.No C330 C331 C332 C333 C334 C335 C336 C337 C338 C340 C341 C342 C343 C344 C345 C346 C347 C348 C349 C350 C351 C352 C353 C354 C356 C357 C358 C359 C360 C364 C371 C372 C399 CN301 CN301 CN302 CN303 FL301 IC301 L301 L302 L303 L304 L305 L306 L307 Q302 Q303 Q304 Q305 Q306 Q307 Q308 R301 R302 R303 R304 R305 R308 R309 R310 R311 R312 R313 R314 R315 4-8 Part No 2203-000192 2203-000989 2203-000989 2203-000989 2401-003107 2203-000192 2202-002037 2401-003107 2203-000192 2401-000918 2202-002037 2401-001169 2203-000192 2203-001214 2203-000260 2401-000438 2203-000495 2203-001132 2401-001254 2301-001014 2203-001214 2203-000260 2401-001254 2202-000797 2401-002144 2301-000253 2202-000797 2203-000260 2203-000260 2203-000260 2203-001077 2203-000260 2401-003107 3708-000391 3708-000394 3710-001648 3708-001165 AC27-80100C 1204-001755 3301-000297 3301-000297 3301-000297 3301-000297 3301-000297 2702-000120 2701-000002 0501-000303 0501-000398 0501-000303 0501-000442 0501-000303 0501-000442 0501-000442 2007-000409 2007-001055 2007-000267 2007-000267 2001-000734 2007-000565 2001-000004 2001-000449 2007-001113 2007-000221 2001-000258 2007-000241 2007-001177 Description ; Specification C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;47nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;22uF,20%,16V,GP,-,6.3x7,5 C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-AL;33uF,20%,16V,GP,-,6.3x7,2.5mm C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;8.2nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;10uF,20%,25V,GP,-,5x11,2mm C-CERAMIC,CHIP;2.2nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.68nF,5%,50V,NP0,TP,2012 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-FILM,PEF;6.8nF,5%,50V,TP,7x3x6,5mm C-CERAMIC,CHIP;8.2nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-AL;47uF,20%,16V,GP,TP,5x11,5 C-FILM,PEF;39NF,5%,100V,TP,7.5X4.5X12.5M C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,CHIP;0.056nF,5%,50V,NP0,TP,201 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x7,5 CONNECTOR-FPC/FC/PIC;10P,1.25MM,STRAIGHT CONNECTOR-FPC/FC/PIC;6P,1.25mm,STRAIGHT, CONNECTOR-SOCKET;2P,1R,2.5mm,STRAIGHT,SN CONNECTOR-FPC/FC/PIC;6P,1.25mm,STRAIGHT, COIL-OSC;7mm,2.4mH,IC-VIDEO PROCESS;LA71200M,QFP,80P,-,PLAS CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, INDUCTOR-RADIAL;15mH,5%,6.2x7.4mm INDUCTOR-AXIAL;100uH,10%,4.2x9.8mm TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 TR-SMALL SIGNAL;KTC3203-Y,NPN,400MW,T0-9 R-CHIP;15KOHM,5%,1/10W,DA,TP,2012 R-CHIP;6.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.8KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.8KOHM,5%,1/10W,DA,TP,2012 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;220KOHM,5%,1/10W,DA,TP,2012 R-CARBON;200KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;680KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1.8KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;1.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;8.2KOHM,5%,1/10W,DA,TP,2012 Remark VR8140C ONLY VR5140C ONLY Loc.No Part No Description ; Specification R316 R317 R318 R319 R320 R320 R322 R322 R326 R327 R328 R329 R330 R331 R332 R333 R334 R335 R336 R337 R338 R339 R340 R341 R342 R343 R344 R346 R347 XT301 2007-000300 2001-000411 2001-000411 2001-000290 2007-000221 2007-000241 2001-000613 2001-000812 2007-000221 2007-000981 2007-000300 2007-000757 2007-000572 2007-000653 2007-000468 2001-000221 2007-000586 2007-000931 2007-000267 2001-000458 2001-000405 2001-000429 2001-000429 2001-000522 2007-000300 2007-001001 2007-001001 2007-001118 2007-000941 2801-003610 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;18KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;18KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1.5KOHM,5%,1/10W,DA,TP,2012 R-CARBON;3.9KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;5.6KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;1.2KOHM,5%,1/10W,DA,TP,2012 R-CHIP;5.6KOHM,5%,1/10W,DA,TP,2012 R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;330KOHM,5%,1/10W,DA,TP,2012 R-CHIP;220OHM,5%,1/10W,DA,TP,2012 R-CHIP;27KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1KOHM,5%,1/10W,DA,TP,2012 R-CARBON;1.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;22KOHM,5%,1/10W,DA,TP,2012 R-CHIP;470OHM,5%,1/10W,DA,TP,2012 R-CHIP;1.8KOHM,5%,1/10W,DA,TP,2012 R-CARBON;2.2OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;180OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;22KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CHIP;510OHM,5%,1/10W,DA,TP,2012 R-CHIP;510OHM,5%,1/10W,DA,TP,2012 R-CHIP;680OHM,5%,1/10W,DA,TP,2012 R-CHIP;47KOHM,5%,1/10W,DA,TP,2012 CRYSTAL-UNIT;3.579545MHz,8ppm,28-AAA,S,1 TM-BLOCK C401 C405 C406 C407 C409 C410 R401 R402 SW401 TM401 2203-000260 2401-002144 2203-000260 2202-000807 2202-002037 2203-000609 2001-000780 2001-000780 3408-001042 AC40-00007A C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-AL;47uF,20%,16V,GP,TP,5x11,5 C-CERAMIC,CHIP;10nF,10%,50V,X7R,TP,2012 C-CERAMIC,MLC-AXIAL;22nF,+80-20%,25V,Y5V C-CERAMIC,MLC-AXIAL;100nF,80-20%,50V,Y5V C-CERAMIC,CHIP;22nF,10%,50V,X7R,TP,2012 R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X3.2MM SWITCH-SLIDE;DC 12V,100mA,-,OFF-ON,TM-BLOCK;115VD025AP,NTSC-M,115VD025AP,Y Remark VR5140C ONLY VR8140C ONLY VR8410C ONLY VR5140C ONLY HI-FI PARTS(HI-FI MODEL ONLY) C501 2203-000192 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C502 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 C503 2401-001254 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C504 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 C505 2401-001254 C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C506 2401-000598 C-AL;1uF,20%,50V,GP,TP,4x7,5 C507 2401-001169 C-AL;33uF,20%,16V,GP,-,6.3x7,2.5mm C508 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 C509 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 C510 2301-000224 C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x13mm,5 C511 2203-000192 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C512 2203-000126 C-CERAMIC,CHIP;1.2nF,10%,50V,X7R,TP,2012 C513 2202-000797 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C514 2202-000797 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C515 2203-000192 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C516 2401-003107 C-AL;47uF,20%,16V,GP,TP,5x7,5 C517 2203-000192 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C518 2401-000598 C-AL;1uF,20%,50V,GP,TP,4x7,5 C519 2401-001931 C-AL;220nF,20%,50V,-,TP,4x7mm,5 C520 2301-000224 C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x13mm,5 C521 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 C522 2401-000414 C-AL;10uF,20%,16V,GP,TP,4x7,5 Samsung Electronics Electrical Parts List Loc.No C523 C526 C527 C528 C529 C530 C531 C532 C533 C534 C535 C536 C537 C538 C540 C541 C542 C543 C544 D503 IC501 L501 L502 L503 L504 R501 R503 R506 R507 R510 R511 R512 R513 R514 R515 R516 R517 R518 R519 R520 R521 R522 R525 R527 R530 R531 Part No Description ; Specification 2401-001169 2401-001254 2401-001931 2401-001020 2401-000598 2203-000192 2401-003107 2203-000192 2203-000192 2203-000192 2401-000414 2401-001919 2401-000414 2202-000797 2401-003107 2203-000192 2401-000414 2301-000224 2401-000414 0401-000101 1204-001754 2702-000108 3301-000297 3301-000297 2701-000126 2007-001141 2007-001141 2007-000774 2007-000468 2001-000005 2007-000872 2001-000005 2007-000872 2001-000780 2007-001055 2001-000780 2007-000804 2007-001224 2001-000786 2001-000786 2001-000472 2007-000518 2001-000472 2007-000300 2001-000347 2001-000290 C-AL;33uF,20%,16V,GP,-,6.3x7,2.5mm C-AL;4.7uF,20%,35V,GP,TP,4x7,5 C-AL;220nF,20%,50V,-,TP,4x7mm,5 C-AL;3.3UF,20%,50V,GP,TP,4X7,5 C-AL;1uF,20%,50V,GP,TP,4x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;10uF,20%,16V,GP,TP,4x7,5 C-AL;2.2uF,20%,50V,-,TP,4x7mm,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-AL;47uF,20%,16V,GP,TP,5x7,5 C-CERAMIC,CHIP;100nF,+80-20%,50V,Y5V,TP, C-AL;10uF,20%,16V,GP,TP,4x7,5 C-FILM,PEF;22nF,5%,50V,TP,7.4x3.9x13mm,5 C-AL;10uF,20%,16V,GP,TP,4x7,5 DIODE-SWITCHING;1N4148,100V,200mA,DO-35, IC-SIGNAL PROCESSOR;AN3663FBP,QFP,64P,-, INDUCTOR-RADIAL;100uH,5%,6x6.4mm CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, INDUCTOR-AXIAL;150uH,5%,2.4x3.4mm R-CHIP;7.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;7.5KOHM,5%,1/10W,DA,TP,2012 R-CHIP;33KOHM,5%,1/10W,DA,TP,2012 R-CHIP;1KOHM,5%,1/10W,DA,TP,2012 R-CARBON;390ohm,5%,1/8W,AA,TP,1.8x3.2mm R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;390ohm,5%,1/8W,AA,TP,1.8x3.2mm R-CHIP;4.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;6.2KOHM,5%,1/10W,DA,TP,2012 R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CHIP;36KOHM,5%,1/10W,DA,TP,2012 R-CHIP;9.1KOHM,5%,1/10W,DA,TP,2012 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;2.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;2.7KOHM,5%,1/10W,DA,TP,2012 R-CARBON;2.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;10KOHM,5%,1/10W,DA,TP,2012 R-CARBON;13KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM INPUT-OUTPUT PARTS C801 2401-002144 C802 2401-001479 C803 2401-002144 C805 2401-000438 C8L1 2401-001730 C8L2 2401-001730 C8M2 2203-000802 JK801 AC37-20001G JK801 AC37-20001H L802 3301-000297 Q801 0501-000303 Q8L1 0501-000398 R801 2001-000969 R802 2001-000025 R803 2007-001239 R804 2007-001166 R8L1 2001-000356 C-AL;47uF,20%,16V,GP,TP,5x11,5 C-AL;470uF,20%,10V,GP,TP,-,C-AL;47uF,20%,16V,GP,TP,5x11,5 C-AL;10uF,20%,25V,GP,-,5x11,2mm C-AL;10uF,20%,50V,GP,TP,5x11,2.5 C-AL;10uF,20%,50V,GP,TP,5x11,2.5 C-CERAMIC,CHIP;33nF,10%,50V,X7R,TP,2012 JACK-RCA;DPAE-,6P,HIFI,PI3.3 JACK-RCA;DPAM-,4P,MONO,PI3.3 CORE-FERRITE BEAD;AA,3.6x1.2x5.7mm,1400, TR-SMALL SIGNAL;KSA733,PNP,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;75OHM,5%,1/4W,AA,TP,2.4X6.4MM R-CHIP;910OHM,5%,1/10W,DA,TP,2012 R-CHIP;75OHM,5%,1/10W,DA,TP,2012 R-CARBON;150KOHM,5%,1/8W,AA,TP,1.8X3.2M Samsung Electronics Remark Loc.No R8L2 R8L3 R8L4 R8L5 R8M1 R8M2 R8M3 W087 VR5140C ONLY VR8140C ONLY VR5140C ONLY Part No Description ; Specification 2001-000356 2001-000449 2001-000780 2001-000734 2007-000941 2007-001224 2001-000786 2001-000515 R-CARBON;150KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CHIP;47KOHM,5%,1/10W,DA,TP,2012 R-CHIP;9.1KOHM,5%,1/10W,DA,TP,2012 R-CARBON;47KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM FUNCTION PARTS D701 0401-000101 D702 0401-000101 D703 0401-000101 D704 0401-000101 D705 0401-000101 D706 0401-000101 D707 0401-000101 D708 0401-000101 Q705 0501-000290 Q707 0501-000398 Q708 0501-000398 Q709 0501-000398 R707 2001-000449 R709 2001-000290 R712 2001-000290 R714 2001-000290 R716 2001-000290 R718 2001-000290 R720 2001-000290 R722 2001-000290 R744 2001-000734 SW702 3404-000165 SW703 3404-000165 SW704 3404-000165 SW705 3404-000165 SW706 3404-000165 SW707 3404-000165 DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, DIODE-SWITCHING;1N4148,100V,200mA,DO-35, TR-SMALL SIGNAL;KSA643-Y,PNP,500mW,TO-92 TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T TR-SMALL SIGNAL;KSC945,NPN,250mW,TO-92,T R-CARBON;2.2KOHM,5%,1/8W,AA,TP,1.8X3.2M R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST SWITCH-TACT;12V,50mA,160gf,6x6mm,SPST DISPLAY (LED-LAMP) C7L01 2401-002008 C7L02 2202-000797 C7L03 2202-000173 CN7L01 3711-004012 LD7L01 0601-001203 LD7L02 0601-001408 LD7L03 0601-001408 LD7L04 0601-001408 LD7L05 0601-001408 LD7L06 0601-001408 LD7L07 0601-001203 R7L01 2001-000290 R7L08 2001-000515 R7L09 2001-000515 R7L10 2001-000515 R7L11 2001-000515 R7L12 2001-000515 R7L13 2001-000515 R7L14 2001-000515 RM7L1 AC59-00011A C-AL;100uF,20%,16V,GP,TP,6.3x11,2.5 C-CERAMIC,MLC-AXIAL;10NF,30%,16V,Y5S,TP, C-CERAMIC,MLC-AXIAL;1nF,10%,50V,Y5P,TP,1 CONNECTOR-HEADER;NOWALL,16P,1R,2.5MM,ANG LED;ROUND,RED,3.3mm,700nm LED;ROUND,GRN,-,LED;ROUND,GRN,-,LED;ROUND,GRN,-,LED;ROUND,GRN,-,LED;ROUND,GRN,-,LED;ROUND,RED,3.3mm,700nm R-CARBON;10KOHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM R-CARBON;220OHM,5%,1/8W,AA,TP,1.8X3.2MM MODULE-REMOCON;-,TSOP2838RF1,-,-,-,-,BK Remark VR5140C ONLY VR5140C ONLY VR5140C ONLY 4-9 Electrical Parts List MEMO 4-10 Samsung Electronics 5. Schematic Diagrams ◆ Block Identification of Main PCB- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-2 5-1 S.M.P.S./Power - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3 5-2 Logic - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-4 5-3 Audio/Video - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-6 5-4 Hi-Fi (Option) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-8 5-5 TM-Block/Input-Output- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-10 5-6 Display (LED-Module ; VR9180/9160/8160/5160/9180C/9160C/8170C/8160C/5160C) - - - - - 5-11 5-7 Display (LED-Lamp ; VR8140C/5140C) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-12 Samsung Electronics 5-1 Schematic Diagrams Note For schematic Diagram - Resistors are in ohms, 1/8W unless otherwise noted. Special note : Most semiconductor devices are electrostatically sensitive and therefore require the special handling techniques described under the “electrostatically sensitive (ES) devices” section of this service manual. Note : Do not use the part number shown on this drawing for ordering. The correct part number is shown in the parts list (may be slightly different or amended since this drawing was prepared). Important safety notices : Components identified with the mark Use only the same type. have the special characteristics for safety. When replacing any of these components. ◆ Block Identification of Main PCB Component Side 5-2 Conductor Side Samsung Electronics Schematic Diagrams 5-1 S.M.P.S./Power PWR OFF Œ PWR ON ´ Œ Q1SR02-COLLECTOR POWER OFF/240Vp-p Samsung Electronics ´ Q1SR02-COLLECTOR POWER ON/270Vp-p 5-3 Schematic Diagrams 5-2 Logic ‰ Ø ¨ Œ ∏ ˆ ˇ ´ ” 5-4 ’ Samsung Electronics Schematic Diagrams IC601 MN101D02X IC601 VOLTAGE TABLE WAVEFORM Œ IC601-35 PB/3Vp-p Ø TP601 PB/3.2Vp-p ´ IC601-34 PB/5Vp-p ∏ IC601-37,38 PB,REC/620mVp-p ˇ IC601-33 PB/5Vp-p ” IC601-47 PB,REC/2.2Vp-p ¨ CN604-6 PB/5Vp-p ’ IC601-50 PB,REC/1.8Vp-p ˆ IC602-8 PB/5Vp-p Samsung Electronics 5-5 Schematic Diagrams 5-3 Audio/Video ¨ Ø ∏ ˇ ´ Œ” ˆ 5-6 Samsung Electronics Schematic Diagrams IC301 LA71200M Samsung Electronics IC301 VOLTAGE TABLE WAVEFORM Œ IC301-9 REC/3Vp-p ˆ TP301 PB/600mVp-p ´ IC301-21 PB,REC/440mVp-p Ø IC301-66 REC(EP)/3.1Vp-p ˇ IC301-24 PB,REC/250mVp-p ∏ IC301-73 REC(SP)/4Vp-p ¨ IC301-39 PB,REC/400mVp-p ” IC301-10 PB/1.4Vp-p 5-7 Schematic Diagrams 5-4 Hi-Fi (Option) Œ ˇ ´ 5-8 Samsung Electronics Schematic Diagrams IC501 AN3662FBP IC501 VOLTAGE TABLE WAVEFORM Œ IC501-30 PB/50mVp-p ´ IC501-21 PB/50mVp-p ˇ IC501-53, 57 PB,REC/150mVp-p Samsung Electronics 5-9 Schematic Diagrams 5-5 TM-Block/Input-Output Œ TM401-18 REC/100mVp-p ´ TM401-20 REC/100mVp-p Œ ´ 5-10 Samsung Electronics Schematic Diagrams 5-6 Display (LED-Module ; VR9180/9160/8160/5160/9180C/9160C/8170C/8160C/5160C)s Samsung Electronics 5-11 Schematic Diagrams 5-7 Display (LED-Lamp ; VR8140C/5140C) 5-12 Samsung Electronics TS-10 DECK MECHANICAL MANUAL TS-10 DECK MECHANICAL Manual ◆ File with the SERVICE MANUAL. TS-10 DECK CONTENTS 1. Disassembly and Reassembly ELECTRONICS 2. Alignment and Adjustment © Samsung Electronics Co., Ltd. JUN. 2001 Printed in Korea AC68-01451A 1. Disassembly and Reassembly 1-1 Deck Parts Locations 1-1-1 Top View Œ ˇ ¨ ˆ ´ Ø Fig. 1-1 Top parts Location-1 Œ ´ ˇ ¨ ˆ Ø GEAR FL CAM MOTOR LOADING ASS’Y LEVER FL ARM ASS’Y HOLDER FL CASSETTE ASS’Y LEVER FL DOOR SLIDER FL DRIVE Samsung Electronics 1-1 Disassembly and Reassembly ´ Œ Ø ∏ ” ˇ ’” Ô ˝ ¨ ˆ Ò Fig. 1-2 Top Parts Location-2 Œ ´ ˇ ¨ ˆ Ø ∏ 1-2 FE HEAD CYLINDER ASS’Y ACE HEAD ASS’Y LEVER UNIT PINCH ASS’Y LEVER #9 GUIDE ASS’Y LEVER TENSION ASS’Y BAND BRAKE ASS’Y ” ’ ˝ Ô Ò DISK S REEL LEVER S BRAKE ASS’Y GEAR IDLE LEVER IDLE LEVER T BRAKE ASS’Y DISK T REEL Samsung Electronics Disassembly and Reassembly 1-1-2 Bottom View Œ ´ ¨ ˇ ” ’ ˆ Ø ∏ ˝ Fig. 1-3 Bottom Parts Location Œ ´ ˇ ¨ ˆ Ø ∏ ” ’ ˝ GEAR JOINT 1 GEAR JOINT 2 BRACKET GEAR MOTOR CAPSTAN ASS’Y LEVER T LOAD ASS’Y GEAR LOADING DRIVE LEVER S LOAD ASS’Y HOLDER CLUTCH ASS’Y BELT PULLEY SLIDER CAM Samsung Electronics 1-3 Disassembly and Reassembly 1-2 Main Deck 1-2-1 Lever FL Door Removal 1-2-2 Holder FL Cassette Ass’y Removal 1) Push the Holder FL Cassette Ass'y Œ about 20mm in the direction of arrow “A”. 2) Rotate the Lever FL Door ´ in the direction of arrow “B”. 3) Release the Hook ˇ and Remove the Lever FL Door ´ in the direction of arrow “C”. 1) Pull the Holder FL Cassette Ass'y Œ to the eject position. 2) Pull the Holder FL Cassette Ass'y Œ as grasping the Holder FL Cassette Ass'y Œ and Lever FL Cassette-R ´ in the same time to release hooking from Main Base until the Boss [A] of Holder FL Cassette Ass'y Œ is taken out from the Rail [B]. 3) Lift the Holder FL Cassette Ass'y Œ, in this time, you have to grasp the Lever FL Cassette-R ´ Continuously until the Holder FL Cassette Ass'y Œ is taken out completely. Œ HOLDER FL CASSETTE ASS'Y "A" Note : Be sure to insert Lever FL Cassette-R ´ in the direction of “A” to prevent separation and breakage of the Lever FL Cassette-R ´ at disassembling and reassembling. "B" ´ LEVER FL DOOR ˇ HOOK "C" Fig. 1-4 Lever FL Door Removal RAIL [B] Œ HOLDER FL CASSETTEE ASS`Y "A" ´ LEVER FL CASSETTEE -R BOSS [A] Fig. 1-5 Holder FL Cassette Ass’y Removal 1-4 Samsung Electronics Disassembly and Reassembly 1-2-3 Slider FL Drive, Gear FL Cam Removal 1-2-4 Lever FL Arm Ass’y Removal 1) Pull the Slider FL Drive Œ to the front direction. 2) Remove the Slider FL Drive Œ in the direction of arrow. (Refer to Fig. 1-6) 3) Remove the Gear FL cam ´. 1) Push the hole “A” in the direction of arrow “B” use the pin.(about Dia. 2.5) 2) Pull out the Lever FL Arm Ass'y Œ from the Boss of Main Base. 3) Remove the Lever FL Arm Ass'y Œ in the direction of arrow “C”. Note : When reinstalling be sure to reassemble Slider FL drive Œ after you insert the Boss of Lever FL ARM-R in Groove of Slider Fl drive Œ. HOLE "A" Assembly : Align the Gear FL Cam Œ with the Gear worm wheel Post as shown drawing. (Refer to Timing point) PIN "B" "C" Œ LEVER FL ARM ASS`Y Fig. 1-8 Lever FL Arm Ass’y Removal ´ GEAR FL CAM Œ SLIDER FL DRIVE Fig. 1-6 Slider FL Drive Removal Œ GEAR FL CAM GEAR WORM WHEEL POST TIMING POINT Fig. 1-7 Gear FL Cam, Gear Worm Samsung Electronics 1-5 Disassembly and Reassembly 1-2-5 Gear Worm Wheel Removal 1-2-6 Motor Loading Ass’y Removal 1) Remove the Gear Worm wheel Œ. 1) Remove the screw Œ. 2) Remove the Motor Loading Ass’y ´. ´ MOTOR LOADING ASS`Y Œ SCREW Œ GEAR WORM WHEEL Fig. 1-10 Motor Loading Ass’y Removal Fig. 1-9 Gear Worm Wheel Removal 1-6 Samsung Electronics Disassembly and Reassembly 1-2-7 Bracket Gear, Gear Joint 2, 1 Removal 1) Remove the SCREW Œ. 2) Remove the Bracket Gear ´. 3) Remove the Gear Joint 2 ˇ. 4) Remove the Gear Joint 1 ¨. Assembly : 1) Be sure to align dot mark of Gear Joint 1 Œ with dot mark of Gear Joint 2 ´ as shown Fig 1-12. (Refer to Timing point1) 2) Confirm the Timing Point 2 of the Gear Joint 2 ´ and Slider Cam ˇ. 1-2-8 Gear Loading Drive, Slider Cam, Lever Load S, T Ass’y Removal 1) Remove the Belt Pulley. (Refer to Fig. 1-30) 2) Remove the Gear Loading Drive Œ after releasing Hook [A] in the direction arrow as shown in detail drawing. 3) Remove the Slider Cam ´. 4) Remove the Lever Load ˇ, Link Load ˆ & Lever Load ¨, Link Load Ø. HOOK(A) ¨ GEAR JOINT 1 ´ SLIDE CAM ˇ GEAR JOINT 2 Œ SCREW ´ BRAKET GEAR Œ GEAR LOADING DRIVE ¨ LEVER LOAD T Ø LINK LOAD T ˇ LEVER LOAD S ˆ LINK LOAD S Fig. 1-11 Bracket Gear, Gear Joint 1,2 Removal Fig. 1-13 Gear Loading Drive, Slider Cam, Lever T, S Load Ass’y Removal Œ GEAR JOINT1 ´ GEAR JOINT2 ˇ SLIDER CAM TIMING POINT 1 TIMING POINT 2 Fig. 1-12 Gear Joint 1,2 Assembly Samsung Electronics 1-7 Disassembly and Reassembly 1-2-9 Gear Loading Drive, Slider Cam, Lever Load S, T Ass’y Assembly 1-2-10 Lever Pinch Drive, Lever Tension Drive Removal 1) When reinstalling, be sure to align dot of Lever Load T Ass'y Œ with dot of Lever Load S Ass'y ´ as shown in drawing, (Refer to Timing Point 1). 2) Insert the Pin A,B,C,D into the Slider Cam ˇ hole, 3) Be sure to align dot of Lever Load T Œ and dot of Gear Loading Drive ¨, (Refer to Timing Point 2). 4) Aline dot of Gear Loading drive ¨ with mark of Slider Cam ˇ as shown in drawing(Refer to Timing Point 3). 1) Remove the Lever Pinch Drive Œ, Lever Tension Drive ´. Œ LEVER PINCH DRIVE ´ LEVER TENSION DRIVE TIMING POINT 1 Œ LEVER LOAD T ´ LEVER LOAD S LEVER LOAD T LEVER LOAD S Fig. 1-15 Lever Pinch Drive, Lever Tension Drive Removal TIMING POINT 2 TIMING POINT 3 PIN A PIN C PIN D PIN B ˇ SLIDER CAM Fig. 1-14 Gear Loading Drive, Slider Cam, Lever Load S, T Ass’y Assembly 1-8 Samsung Electronics Disassembly and Reassembly 1-2-11 Lever Tension Ass’y, Band Brake Ass’y Removal 1) Remove the Lever Brake S Ass'y (Refer to Fig 1-17). 2) Remove the Spring Tension Lever Œ. 3) Rotate stopper of Main Base in the direction of arrow “A”. 4) Lift the Lever Tension Ass'y ´ & Band brake Ass'y ˇ. Note : 1) When replacing the Lever Tension Ass'y ´, be sure to apply Grease on the post, 2) Take care not to touch stain on the felt side, and not to be folder and broken Band brake Ass'y 3) After Lever Tension Ass'y seated, Rotate stopper of Main Base to the Mark[B]. 1-2-12 Lever Brake S, T Ass’y Removal 1) Release the Hook [A] and the Hook [B], [C] in the direction of arrow as shown in Fig 1-17. 2) Lift the Lever S, T Brake Ass'y Œ, ´ with spring brake ˇ. Assembly : 1)Assembly the Lever S Brake Ass'y Œ on the Main Base. 2)Assembly the Lever T Brake Ass'y ´ with spring brake ˇ. Note : Take extreme care not to be folded and transformed Spring Brake at removing or reinstalling. ˇ BAND BRAKE ASS`Y HOOK(A) ´ LEVER TENTION ASS`Y ˇ SPRING BRAKE Œ SPRING TENTION LEVER STOPPER "A" MARK[B] Œ LEVER S BRAKE ASS`Y HOOK(C) HOOK(B) ´ LEVER T BRAKE ASS`Y Fig. 1-16 Lever Tension Ass’y, Band Brake Ass’y Removal Fig. 1-17 Lever Brake S, T Ass’y Removal Samsung Electronics 1-9 Disassembly and Reassembly 1-2-13 Gear Idle Ass’y Removal 1-2-14 Disk S, T Reel Removal 1) Push the Lever Idle Œ in the direction of arrow “A”, “B”. 2) Lift the Lever Idle Œ. 1) Lift the Disk S, T Reel Œ, ´. Œ DISK S REEL Assembly : 1) Apply oil in two Bosses of Lever Idle Œ. 2) Assemble the Gear Idle ´ with the Lever Idle Œ. Note : When replacing the Gear Idle ´, be sure to add oil in the boss of Lever Idle Œ. ´ DISK T REEL "A" Œ LEVER IDLE ´ GEAR IDLE "B" ´ GEAR IDLE HOOK "C" Fig. 1-19 Disk S, T Reel Removal Fig. 1-18 Gear Idle Ass’y Removal 1-10 Samsung Electronics Disassembly and Reassembly 1-2-15 Holder Clutch Ass’y Removal 1) Remove the Washer Slit Œ. 2) Lift the Holder Clutch Ass’y ´. Note : When you reinstall Holder Clutch Ass'y 1) Check the condition of spring as shown in detail A. 2) Don't push Holder Clutch Ass'y down with excessive force Just insert Holder Clutch Ass'y into post center with dead force and Rotate it smoothly. Be sure to confirm that spring is in the slit of Gear Center Ass'y as shown in detail B. Œ WASHER SLIT ´ HOLDER CLUTCH ASS`Y 1-2-16 Lever Up Down Ass’y, Gear Center Ass’y Removal 1) Remove the 2 hooks in the direction of arrow as shown Fig. 1-21 and lift the Lever Up Down Ass’y Œ. 2) Lift the Gear Center Ass’y ´. Assembly : 1) Insert the Lever Up Down Ass'y Œ in the rectangular holes on Main Base as shown in Fig 1-22. 2) Lift the Lever Up Down Ass'y Œ about 35°. (Refer to Fig 1-22) 3) Insert Ring of the Gear Center Ass'y ´ in the Guide of the Lever Up Down Ass'y Œ. 4) Insert the Gear Center Ass'y ´ in the post on Main Base. 5) Push down the Lever Up Down Ass'y Œ for locking of the Hook. Note : 1) Take care not to separate and sentence does not mark sense. 2) Be sure to confirm that Ring of the Gear Center Ass'y ´ is in the Guide of the Lever Up Down Ass'y Œ after finishing assembly of Lever Up Down Ass'y Œ and Gear Center Ass'y ´. Œ LEVER UP DOWN ASS`Y ´ GEAR CENTER ASS`Y DETAIL A <BAD> SPRING <GOOD> DETAIL B Fig. 1-21 Lever Up Down Ass’y Removal SPRING GEAR CENTER ASS'Y GUIDE LEVER UP DOWN ASS'Y <BAD> <GOOD> RING GEAR POST HOOK 35 Fig. 1-20 Holder Clutch Ass’y Removal MAIN BASE Fig. 1-22 Lever Up Down Ass’y Removal Samsung Electronics 1-11 Disassembly and Reassembly 1-2-17 Guide Cassette Door Removal 1) Lift the Hook [A]. 2) Rotate the Guide Cassette Door Œ in the direction of arrow. Note : After reinstalling the Guide Cassette Door Œ sure the Hook [A]. Œ GUIDE CASSETTE DOOR 1-2-18 Lever Unit Pinch Ass’y, Plate Joint, Spring Pinch Drive Removal 1) Lift the Unit Pinch Ass’y Œ. 2) Remove the Plate Joint ´ from Lever Pinch Drive. 3) Remove the Spring Pinch Drive ˇ. Note : 1) Take extreme care not to touch the grease on the Roller Pinch. 2) When reinstalling, be sure to apply grease on the post pinch roller. Œ LEVER UNIT PINCH ASS`Y HOOK [A] ´ PLATE JOINT ˇ SPRING PINCH DRIVE Fig. 1-23 Guide Cassette Door Removal Fig. 1-24 Lever Unit Pinch Ass’y, Plate Joint, Spring Pinch Drive Removal 1-12 Samsung Electronics Disassembly and Reassembly 1-2-19 Lever #9 Guide Ass’y Removal 1-2-20 FE Head Removal 1) Remove the Spring #9 Guide Œ. 2) Lift the Spring #9 Guide Ass’y ´ in the direction of arrow “A”. 1) Remove the screw Œ. 2) Lift the FE Head ´. Note : 1) Take extreme care not to get grease on the tape Guide Post. 2) After reinstalling, check the bottom side of the Post #9 Guide to the top side of Main Base. Œ FE HEAD "A" Œ SPRING #9 GUIDE ´ LEVER #9 GUIDE ASS`Y "B" Fig. 1-26 FE Head Removal Fig. 1-25 Lever #9 Guide Ass’y Removal Samsung Electronics 1-13 Disassembly and Reassembly 1-2-21 ACE Head Removal 1-2-22 Slider S, T Ass’y Removal 1) Pull out the FPC from connector of ACE Head Ass’y ´. 2) Remove the screw Œ. 3) Lift the ACE Head Ass’y ´. 1) Move the Slider S, T Ass’y Œ, ´ to slot, and then lift it to remove. (Refer to arrow) Œ SLIDER S ASS`Y Œ SCREW ´ SLIDER T ASS`Y ´ HEAD ACE ASS`Y Fig. 1-28 Slider S, T Ass’y Removal Fig. 1-27 ACE Head Removal 1-14 Samsung Electronics Disassembly and Reassembly 1-2-23 Plate Ground Deck, Cylinder Ass’y Removal 1-2-24 Belt Pulley Removal 1) Remove the 3 Screws Œ. 2) Lift the Plate Ground Deck ´. 3) Lift the Cylinder Ass’y ˇ. 1) Remove the Belt Pulley Œ. Note : Take extreme care not to get grease on Belt Pulley Œ at assembling or reassembling. Assembly : 1) Match the 3 holes in the bottom of Cylinder ass'y ˇ to the 3 holes of Main Base as attending not to drop or knock the Cylinder ass'y ˇ. 2) Tighten the 1 Screw Œ. 3) Match the Plate Ground Deck ´ to the Hole of Base Main. 4) Tighten the other 2 Screws Œ. Œ BELT PULLEY Note : 1) Take care not to touch the Cylinder Ass'y ˇ and the tape guide post at reinstalling. 2) When reinstalling, Don't push down too much on Screw Driver. Œ 3 SCREWS Fig. 1-30 Belt Pulley Removal ´ PLATE GROUND DECK 1-2-25 Level Head Cleaner Ass’y Removal (Optional) 1) Release the Hook Œ. 2) Lift the Lever Head Cleaner Ass’y ´. ´ LEVER HEAD CLEANER ASS'Y Œ HOOK SLEEVE-HEAD CLEANER ˇ CYLINDER ASS'Y Fig. 1-29 Plate Ground Deck, Cylinder Ass’y Removal Samsung Electronics Fig. 1-31 Level Head Cleaner Ass’y Removal 1-15 Disassembly and Reassembly 1-2-26 Damper Capstan, Motor Capstan Ass’y Removal 1) Remove the Damper Capstan Œ in the direction of arrow. 2) Remove the 3 Screws ´. 3) Remove the Motor Capstan Ass’y ˇ. 1-2-27 How to Eject the Cassette Tape (If the unit does not operate on condition that is inserted into housing ass’y) 1) Turn the Gear worm Œ clockwise with screw driver.(Refer to arrow) (Other method : Remove the Screw of Motor Load Ass'y, Separate the Motor Load Ass'y) Assembly : 1) Match the 3 holes of Motor Capstan Ass’y ˇ to the 3 holes of Main Base. Be careful not to drop or knock the Motor Capstan Ass'y ˇ. 2) Tighten the 3 Screws ´ in the direction of arrow as shown detail drawing. 3) Assemble the Damper Capstan Œ. Œ GEAR WORM Note : After tightening screws, check if there is gap between the head of screws and the top side of Main Base. There should have no gap between the head of screws and the top side of Main Base. After reinstalling, adjusting the tape transport system again. ´ 3 SCREWS A B Fig. 1-33 C Œ DAMPER CAPSTAN 2) When Slider S,T are approched in the position of unloading, rotate holder Clutch counterclockwise after inserting screw driver in the hole of frame's bottom in order to wind the unwinded tape. (Refer to Fig.1-34) (If you rotate Gear Worm Œ continuously when tape is in state of unwinding, you may cause a tape contamination by grease and tape damage. Be sure to wind the unwinded tape in the state of set horizently.) 3) Rotate Gear Worm Œ clockwise using screw driver again up to the state of eject mode and then pick out the tape.(Refer to Fig.1-33) ˇ MOTOR CAPSTAN ASS'Y Fig. 1-32 Damper Capstan,Motor Capstan Ass’y Removal FRAME Fig. 1-33 1-16 Samsung Electronics Disassembly and Reassembly 1-3 The table of clearing, Lubrication and replacement time about principal parts 1) The replacement time of parts is not life of parts. 2) The table 1-1 is that the VCR Set is in normal condition (normal temperature, normal humidity). The checking period may be changed owing to the condition of use, runtime and environmental conditions. 3) Life of the Cylinder Ass’y is depend on the condition of use. 4) See exploded view for location of each parts. <Table 1-1> * T A PE P A T H S Y S T E M D R I V I N G S Y S T E M B R A K E S Y S T E M Parts Name POST TENSION SLANT POST S, T #8 GUIDE SHAFT CAPSTAN SHAFT #9 GUIDE POST #3 GUIDE POST GUIDE ROLLER S, T CYLINDER ASS’Y FE HEAD ACE HEAD PINCH ROLLER POST REEL S, T SLEEVE TENSION POST CENTER LEVER IDLE BOSS (2Point) CAPSTAN MOTOR PULLEY BELT PULLEY HOLDER CLUTCH ASS’Y GEAR CENTER ASS’Y GEAR IDLE (2Point) LOADING MOTOR BAND BRAKE ASS’Y BRAKE T ASS’Y Checking Period 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ O ∆ O O ◆ ◆ ◆ ◆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ ∆ O ∆ O O ∆ ∆ ∆ ∆ ∆ ∆ O O O O O ∆ ∆ ∆ ∆ ∆ ∆ O O O O O ◆ ◆ ◆ ◆ O O O O O O O O ∆ ∆ ∆ ∆ ∆ ∆ O O O O O O O O O O O ∆ ∆ ∆ ∆ ∆ ∆ O O O O O ◆ ◆ ◆ ◆ O O O O O O O O ∆ ∆ ∆ ∆ ∆ ∆ O O O O O O O O O O O ∆ ∆ ∆ ∆ ∆ ∆ O O O O O ◆ ◆ ◆ ◆ ∆ O O O O O O O ∆ ∆ ∆ ∆ ∆ ∆ O O O O O ◆ ◆ ◆ ◆ O O O O O O O O ∆ ∆ ∆ : Cleaning Samsung Electronics ∆ ∆ O O O O O O O O O O O O O O O O : Check and replacement in necessary O O O O O O O O Remark - To clean the parts, use patch and alcohol (solvent). - After cleaning, use the video tape after alcohol is gone away completely. - We recommend to use oil [EP-50] or solvent. - One or two drops of oil should be applied after cleaning with alcohol. - Periodic time of applying oil (Apply oil after cleaning) - The excessive applying oil may be the cause of malfunction. ◆ : Add Oil 1-17 Disassembly and Reassembly MEMO 1-18 Samsung Electronics 2. Alignment and Adjustment 2-1 Tape Transport System and Adjustment Locations The tape transport system has been adjusted precisely in the factory. Alignment is not necessary except for the following : 1) Noise observed on the screen. 2) Tape damage. 3) Parts replacement in the tape transport system. Lower flange height of tape guide is used as the reference for the transport adjustment. To maintain the height of the tape guide and prevent damage, do not apply excessive force onto the main base. CYLINDER ASS'Y GUIDE ROLLER "S" GUIDE ROLLER "T" FULL ERASE HEAD HEIGHT SCREW #3 GUIDE POST TENSION POST PINCH ROLLER TILT SCREW X - POSITION ADJUST SILT #9 GUIDE POST AZIMUTH SCREW CAPSTAN #8 GUIDE POST TAKE UP REEL DISK SUPPLY REEL DISK Fig. 2-1 Location of Tape Transport Adjustment PINCH ROLLER FE HEAD CYLINDER ASS'Y GUIDE ROLLER "S" GUIDE ROLLER "T" POST TENSION #8 GUIDE POST #9 GUIDE POST #3 GUIDE POST MAIN BASE ACE HEAD CAPSTAN SHAFT Fig. 2-2 Tape Travel Diagram Samsung Electronics 2-1 Alignment and Adjustment 2-2 Tape Transport System Adjustment When parts are replaced, perform the required adjustments by referring to procedures for the tape transport system. If there are any changes to the tape path, first run a T-120 tape and make sure excessive tape wrinkle does not occur at the tape guides. 1) If tape wrinkle is observed at the guide roller S, T, turn the guide roller S, T until wrinkle disappears. 2) If the tape wrinkle is still observed at the tape guide, perform the tilt adjustment of the ACE head. (See “2. Alignment and Adjustment” of the Service Manual for Test Point Locations.) 2-2-1(b) ACE HEAD TILT ADJUSTMENT 1) Playback a blank tape and observe the position of the tape at the lower flange of tape guide. 2) Confirm that there is no curl or wrinkle at the lower flange of tape guide as shown in Fig. 2-5 (B). 3) If a curl or wrinkle of the tape occurs, slightly turn the screw (A) tilt adjust on the ACE head ass’y. 4) Reconfirm the ACE head height. 2-2-1 ACE Head Assembly Adjustment WRINKLE 2-2-1(a) ACE HEAD HEIGHT ADJUSTMENT 1) Run the alignment tape (Color bar) in the playback mode. 2) Observe surface of the audio head using a dental mirror. 3) Turn screw (C) clockwise or counterclockwise until the gap of lower tape edge and the lower edge of the control head is about 0.25mm. (Refer to Fig. 2-3 and 2-4) SCREW (A) TLIT ADJUST SCREW (C) HEIGHT ADJUST X-POSITION ADJUSTING SLIT SCREW (D) X-POSITION LOCKING SCREW (B) AZIMUTH ADJUST Fig. 2-3 Location of ACE Head Adjustment Screw (BAD) (GOOD) Fig. 2-5 Tape Guide Check 2-2-1(c) AUDIO AZIMUTH ADJUSTMENT 1) Load alignment tape (Mono scope) and playback the NTSC : 7KHz (PAL : 6KHz) signal. 2) Connect channel-1 scope probe to audio output test point. 3) Adjust screw (B) to achieve maximum audio level. (See Fig. 2-3) 2-2-1(d) ACE HEAD POSITION (X-POINT) ADJUSTMENT 1) See “2. Alignment and Adjustment” for ACE Head position (X-Point) adjustment. AUDIO HEAD VIDEO HEAD 0 ~ 0 .25 mm CONTROL HEAD Fig. 2-4 ACE Head Height Adjustment 2-2 Samsung Electronics Alignment and Adjustment 2-2-2 Linearity adjustment (Guide roller S, T adjustment) 1) Playback the Mono Scope alignment tape (SP mode). 2) Observe the video envelope signal on an oscilloscope (triggered by the video switching pulse). 3) Make sure the video envelope waveform (at its minimum) meets the specification shown in Fig. 2-6. If it does not, adjust as follows : c a b abcd c,b,d/a d 63% Fig. 2-6 Envelope Waveform Adjustment Note : a=Maximum output of the video RF envelope. b=Minimum output of the video RF envelope at the entrance side. c=Minimum output of the video RF envelope at the center point. d=Maximum output of the video RF envelope at the exit side. H'D SWITCHING PULSE A ENVELOPE 4) If the section A in Fig. 2-7 does not meet the specification, adjust the guide roller S up or down. 5) If the section B in Fig. 2-7 does not meet the specification, adjust the guide roller T up or down. B A B Fig. 2-7 Adjustment Points 6) Play back the Mono Scope alignment tape (SP mode). 7) Connect an oscilloscope CH-1 to the Envelope and CH-2 to the H’D SW Pulse for triggering. ) driver to obtain a flat video RF envelope as shown in Fig. 2-8. 8) Turn the guide roller heads with a flat head ( IDEAL ENVELOPE S HEIGHT TOO HIGH S HEIGHT TOO LOW T HEIGHT TOO HIGH GUIDE ROLLER S T HEIGHT TOO LOW GUIDE ROLLER T Fig. 2-8 Guide Roller S, T Height Adjustment Samsung Electronics 2-3 Alignment and Adjustment 2-2-3 Check Transitional Operation from RPS to Play Check transition from RPS mode to play mode : Using a pre-recorded SP tape, make sure the entry side of envelope comes to an appropriate steady state within 3 seconds (as shown in Fig. 2-9). If the envelope waveform does not reach specified peak-to peak amplitude within 3 seconds, adjust as follows : 1) Make sure there is no gap between the supply roller lower flange and the tape. If there is a gap, adjust the supply guide roller again. 2) Change operation mode from the RPS to the play mode (again) and make sure the entry side of envelope rises within 3 second. 2-2-4 Envelope Check 1) Make recordings on T-120 (E-120) and T-160 (E-180) tape. Make sure the playback output envelope meets the specification as shown in Fig. 2-10. 2) Play back a self recorded tape (recording made on the unit using with T-120 (E-120). The video envelope should meet the specification as shown in Fig. 2-10. In SP mode, (A) should equal (B). If the head gap is wide, upper cylinder should be checked. A B ENTRANCE SIDE ENVELOPE Fig. 2-10 Envelope Output and Output Level 2-2-5 Tape Wrinkle Check Fig. 2-9 Video Envelope Rising when Operation mode Changes from RPS to Play Mode 1) Run the T-160 (E-180) tape in the playback, FPS, RPS and Pause modes and observe tape wrinkle at each guide. 2) If excessive tape wrinkle is observed, perform the following adjustments in Playback mode : ◆ Tape wrinkle at the guide roller S, T section : Linearity adjustment. ◆ Tape wrinkle at tape guide flange : ACE head assembly coarse adjustment. 2-3 Reel Torque 1) The rotation of the capstan motor causes the Holder Clutch Ass’y to rotate through the Belt Pulley. 2) The spring wrap PLAY/REV of holder clutch ass’y drives the disk reel S, T through gear idle by rotation of gear center ass’y. 3) Brake is operated by slider cam at FF/REW mode. 4) Transportation of accurate driving force is done by gears. (Gear Center Ass’y) <Table 2-1> MODE TORQUE g/cm GAUGE PB 42 ± 11 Cassette Torquemeter RPS 145 ± 30 Cassette Torquemeter Note : If the spec. does not meet the followings specifications, replace the holder clutch ass’y and then recheck. 2-4 Samsung Electronics