Download Diasonic Tech DDR-3032 User`s manual
Transcript
DIGITAL VOICE RECORDER & AUDIO PLAYER MODEL : DDR-3032/DDR-3064/DDR-3128/DDR-3256 DDR-3032R/DDR-3064R/DDR-3128R/DDR-3256R User's Manual Copyright reserved. 2001, DIASONIC TECHNOLOGY CO. LTD. All rights No part of this User's Manual may be reproduced, translated or used for profits. It is against copyright law to violate these rules. The content of this User's Guide is produced under the greatest care of our company. To improve the quality and function of the product, the content of manual can be modified without any advance notice. Our company does not take any responsibility for the loss or damage by the modification of the manual. MP3 files should not be used for the purpose of commercial use or service other than personnel use. It is in conflict with the domestic copyright law in case of below. It is prohibited to copy recorded matter other than the purpose of personnel enjoyment by law. Thank you for choosing our DIGITAL VOICE RECODER & MUSIC PLAYER from DIASONIC TECHNOLOGY CO. LTD. Before use, read through the User's Manual carefully. We advise you to keep this user's manual to avoid possible technical difficulties. 1. DDR-3000 SERIES 1) Suggestions for Users 2) About DDR-3000 SERIES 3) Functions and Features 4) Names of Each Part/ LCD Screen 5) Use of Battery and Components in Package 6) Basic Directions for Use 7) How to Use Buttons 8) How to Set Menu in VOICE/MP3/FM Part 9) Operation of Playback Dial 10) How to Record and to Set Up Mode 11) Various Methods for Playback 12) Deleting and Organizing Data 13) TIMER/REC & ALARM/PLAY Function 14) How to Connect with External Appliances 15) FM Signal-Receiving Function Do not drop or shock the device. It can cause technical trouble. 1 2 3 5 6 8 9 12 13 15 17 19 20 24 26 - In hot, humid environments, such as in a closed automobile under direct sunlight. (above 60 ) - Under direct sunlight or next to a heating appliance - Areas of excessive dust or moisture.- Humid places(bathrooms) Overpressure can cause damage on the liquid crystal display(LCD). DIASONIC TECHNOLOGY CO. LTD. can not be held responsible for any kind of damage by the use of this product or reparation for injury by a third party [or individuals]. DIASONIC TECHNOLOGY CO. LTD. does not accept any responsibility for the loss of data in the memory Users should not repair, remodel or take the product apart by themselves. Do not use the device on such places where the use of electrical machines is prohibited. 2. DDR-3000 Series Software & Mail Manager 1) DDR-3000 Series software & mail manager 2) Connecting DDR-3000 SERIES and set up 3) Composition of Software 4) Spectrum screen and sound effect 5) Transferring MP3 6) Sending DVF files to computer 7) Deleting MP3 and DVF files 8) Resetting flash memory 9) Managing files by using Software 10) Mail Manager Please try to avoid such places. 27 28 30 33 34 35 37 38 39 40 3. General Specifications 43 4. Warranty Card / Limited Coverage 50 While operating one function of the product, do not try other functions. Applying heat to the body of the product or to batteries can cause irreversible damage. If a customer or a third party [or individuals] uses the device in an inappropriate way, or if main device get shocked, data in a memory can be changed or lost without warning. Save important data onto the computer. Additional DVR-EXPLORER / MAIL MANAGER DDR-3000 SERIES is a digital audio recorder and player offering high quality sound, with the latest in digital technology from Cubig Group. It provides consumers with various record modes / functions (SHQ / HQ / SP / Timer Recorder Function) and various playback modes / functions (Alarm Playback / Speaker Playback / Earphone playback / real time playback.) It can also store and playback MP3 files, which are digitally compressed music files. Also receiving, listening and recording FM radio signals / broadcast can also be done. DDR-3000 Series is a portable digital audio device for the next generation. DDR-3000 SERIES is the player, which is convenient when transmitting recorded data, and MP3 files from one PC to another, and which helps regenerating, managing saved data and sending data through e-mail. ALARM/PLAY, TIMER/REC, SETTING UP TIMER DDR-3000 SERIES sets up timer or alarm to record or play messages or songs at any time, and it helps recording or playback be processed smoothly. Polished, Sophisticated, Extremely Small Size & Solid Exterior DDR-3000 SERIES adopted the function of SAMPLING with high quality of sound such as SHQ/HQ/SP so that it supports high qualityvoice recording and playback technology. We guarantee that additional MP3 technology satisfies consumers' demands. Extension of Additional MP3/HD Function Voice recorder together with various function of MP3 player (equalizer/repeat function) can correspond to the advantage of MP3 players, and you can enjoy portable data-storage system or portable hard disk-storage system. USB INTERFACE: supports quick uploading and downloading. Display of time on LCD screen Saved calendars up to year of 2099 Thin & slim design for portable and convenient use Hidden high quality-microphone inside of the device Total 396 messages with 4 separate files (99 messages in each file) FM Radio Broadcast-Receiving & recording(optional function) ARS (Automatic Recording System): prevents unnecessary recording when there is no sound or voice so that maximizes the time of recording (A/B/OFF). You can enjoy both receiving and recording FM radio signals and broadcast and real time FM recording. KEY HOLD FUNCTION: prevents accidental operation when not in use. REC MODE: for appropriate quality, time and purpose (SHQ/HQ/SP) BACKLIGHT Even at night, JOG button will help users set menu easily so that they can see and check the display of LCD of DARK-BLUE colors with attached BACKLIGHT on the back. RECORD DATE FUNCTION: shows time, date, and year of recording. REMAIN FUNCTION: shows remain time for recording and playback. TIMER RECORDER FUNCTION: can receive and record radio broadcast automatically -daily, weekly or monthly. ALARM PLAY FUNCTION: can play messages automatically at requested time after setting time and date. USB JACK Repeat & A-B Repeat function: can play as long as you want to, and you choose the intervals between two part that you want to listen. EARPHONE JACK SEARCH PLAY FUNCTION: searches(forward, backward) the part that you want to listen fast and easily. Ext C-MIC.JACK C-MIC AUTO OFF FUNCTION: turns off power automatically after one minute with no other work or operation. POWER OFF: Turn off the power by pressing the "RADIO/OFF" button manually.(Only Applicable in Voice Mode and DDR-3000 with FM Radio) NECK STRAP FILE REPEAT FF/PLAY/REW REC/STOP D.C JACK MENU RADIO ERASE SPEED CONTROL: 3Steps Playback Speed Control(Fast/Normal/ VOL+/VOLHOLD ON/OFF Slow) by pressing "FILE/SPEED" button. MONITOR FUNCTION: you can listen to the contents with earphones while recording. H/D(32M/64M/128M/256M) FUNCTION: can substitute for portable hard disks. Digital output Volume control(30 levels) FILE Various equalizer modes(normal, rock, live, classic, pop) Various repeat function (NORMAL/INTERVAL REPEAT/1 TRACK/ MESSAGE NO. ALL TRACK/RANDOM) REC TIME/PLAY TIME/ Mhz/ARS/EL/CONT/TIMER/ VOLUME/TIME On/off function of backlight on LCD (dark-blue) Downloading MP3 & WMA files / playback with various modes. Simultaneous recording function: can receive and record radio broadcast (TIMER/REC): optional. USE OF PORTABLE SAVING DEVICE REC MODE REPEAT/EQ HOLD REC/PLAY/USB DISK BATTERY 4. Lifetime of Battery Battery in use Slide open the battery cover. Recording Playback through speaker Playback through earphone (Level of Volume: Medium) (Level of Volume: Medium) Alkaline Battery About 15 hr. Size "AAA" LR-03 Put two LR 03 type batteries in accordance with (+) (-) diagram inside of the device, and slide the cover back on. Battery: LR 03 or similar batteries of same kind (size "AAA" or UM-4) About 9 hr. About 15 hr. 5. Suggestions when using batteries Do not mix and use different kinds of batteries at the same time. Remove batteries when you do not use the device for a long time. Check the battery life by pressing the PLAY/STOP button or REC button. If you use charging battery, read the direction of a battery charger carefully before use. or a 6. Components of Package Battery Full Battery mostly consumed Battery partially consumed Battery completely consumed Caution If LCD screen does not work even with new batteries, check polarity of batteries immediately. In the case that LCD screen does not work in spite of appropriate setting of polarity, remove the batteries and ask for repair. Note If you leave batteries unused in the device for a long time, it would be wasted. STEREO EARPHONE, TELEPHONE ADAPTER, INSTALL CD, LINE-IN CABLE, USB CABLE, EXTERNAL MIC, BATTERY (2 AAA / LR-03type), NECK STRAP, AC ADAPTOR (OPTION), REMOTE CONTROLLER(OPTION) Power ON/OFF Press Playback or REC button for 2seconds, device will power up and LCD screen will be displayed as shown below. If no buttons are pressed within 1 minute, device will power off automatically to conserve power. Power off manually: Press "RADIO/OFF" for 5 seconds. We recommend that you to set up the time right after inserting the supplied batteries. If you do not set time, you cannot access certain functions such as ALARM/PLAY, TIMER/REC and etc. With only one setting, you can see time on screen by using the backup function (30 minutes) even if power is off. It needs to be reset when device is not in use for a long time. (Go to No. 8 on User's Manual to see how to set up SET mode) VOICE FILE SECTION(A/B/C/D) Key Action: means short press, and press(more than 1 second). BUTTON KEY ACTION WHEN PLAYER IS NOT WORKING WHEN PLAYER IS RECORDING WHEN PLAYER IS PLAYING Stop playing index Start scanning and playing from current index X Stop playing index Forward to next index Start recording on next index Start playing next index Automatic conversion to search index X Conversion to previous index X Automatic conversion to search index X Current index search & consecutive search Playing previous index in case less than 5 seconds, Playing the first part of playing index in case over 5 seconds Playing from the beginning after searching current index contrariwise and return to the beginning VOL+ Turn up the volume Turn down the volume ERASE FILE/ SPEED (5sec) Stop recording Stop playing current index Stop recording Stop playing current index X Turn up the volume in case of motoring Turn down the volume in case of motoring X Turn up the volume Turn down the volume X X X X Repetitive playback of current index A-B repeat & playback current index Erase index X X Delete indexes of all files X X Change of sectionsA/B/C/D/MP3/HD X FAST/NORMAL/SLOW Receive FM radio signals X X Power OFF X X REPEAT RADIO/ OFF HOLD ON All buttons will be locked out. Check the memory capacity MENU VOL HOLD OFF Start playing current index Start recording after conversion to +index Start recording after conversion to +index Set menu / How to Use HOLD Switch If HOLD switch is placed upward, all buttons will be locked out except the DISPLAY switch. Slide HOLD switch upward if you want to insure recording or when you want to lock all buttons. Before use, check the HOLD switch and slide it downward, and then, turn on the power. means long Note) Instant recording function: For your convenience, after pressing REC button for 2 seconds, it turns on power and starts recording at the same time even when power is off. FM RADIO SECTION(RADIO KEY) BUTTON / KEY ACTION WHEN RECEIVING FM SIGNALS Start to create and set channels for each FM station Select channel memory(01~10) and frequency Select channel memory(01~10)and frequency MP3 FILE SECTION(MP3) WHEN RECORDING FM RADIO BROADCAST BUTTON KEY ACTION WHEN PLAYER IS NOT WORKING WHEN PLAYER IS PLAYING Start playing current track Stop playing track X Start scanning/playing from current track Stop playing track Increase +index Conversion to next track Start playing the next track Automatic conversion to search track Automatic conversion to search track Current track search & consecutive track search Playing previous track in case less than 5 seconds, Playing the first track in case over 5 seconds Playing from the beginning after searching current track contrariwise and return to the beginning Start recording +index after changing A FIEL Stop playing current track Start recording +index after changing A FIEL Stop playing current track X / Start to record FM radio broadcast Stop recording FM radio broadcast and start receiving FM signals Set menu X Change to FM memory channel mode and release X Turn up the volume Turn up the volume Turn down the volume Turn down the volume REPEAT X X MENU Set menu Perform equalizer ERASE X X VOL+ Turn up the volume Turn up the volume FILE X X VOL / MENU VOL+ VOL RADIO Stop receiving FM signals X Note) Earphone works as an antenna. The longer, straighter the line of earphone is, the more clearer the quality of the sound will be. Conversion to previous track / Turn down the volume Turn down the volume X Repetitive playback of current track(NOR/RND/ONE/ALL) X A-B repeat & playback current track Delete current track X Delete tracks of MP3 files X FILE Change of sectionsA/B/C/D/MP3/HD X RADIO Receive FM radio signals X REPEAT ERASE (5sec) Note) WMA files can only be applied to DDR-3000 SERIES MODELS 2. Map of Menu-MP3 Part 1. Map of menu-Voice section When pressing menu button, choose MODE. Then LCD screen displays the content of MODE. After you choose the part that you want by moving PLAYBACK button upward and/or downward, then press the button in to save it in the memory. When pressing MENU button, choose EQ. Then LCD screen displays the contents of EQ. After you choose the section that you want by moving PLAYBACK button upward and/or downward, then press the button in to save it in memory. Move Playback dial upward and downward, (2) press button in When setting menu, (1)move the button up and down(when it is moving up and down, playback dial does not work), and (2) press button in. Then the section of menu is set. (1) Move the button up and down (2) Press button in. FF (+INDEX) PLAY/STOP REW (-INDEX) Before you start recording, you need to set date and time first. Press MENU button. It will show you "MODE" sign. Move PLAYBACK dial up and/or down, and choose SET mode, then press PLAYBACK dial in. Number of year will flash. Choose each number of year and press PLAYBACK dial in. Repeat the procedure to set month, day and time. Press PLAYBACK dial Move PLAYBACK dial up and down, and choose each number to set date, and press PLAYBACK dial. SET DATE MODE When you finish setting time and date, press MENU button, and go back to first stage. How to record You can record up to 99 messages (files) in each of the four (A, B, C and D) folders. Press the file button to select the appropriate folder that you want to record to.(Choose one among A/B/C/D) Place the device or microphone to face the source of the sound, then press REC/STOP button for 1 second. As soon as the recording process begins, LCD screen will display the number, mark and time of recording, and red LED light will flash. If you want to stop recording, press REC/STOP button again. It is impossible to stop the recording within 5 seconds after you press REC/STOP button. It does not stop even if you press STOP button. When you press REC/STOP button, the content of recording will be saved as the last taken number so that you don't have to search for unrecorded parts as done with tape recorders. Don't forget to change the batteries to new ones when you want to record for a long time. Check the remaining battery icon before you start recording. Caution For successful recording, conduct mock recordings as a pretest. If batteries are used up while recording, LCD screen will display "LO.BT(low battery)" sign, and power will be turned off automatically. Then, change batteries. How to Set REC Mode Press MENU button when player is not playing/recording, MODE will appear on LCD screen. Move PLAYBACK dial up and/or down to choose the desired record mode (SHQ/HQ/SP), then press the dial in. Highest quality of recoding can be achieved by setting the record mode to SHQ. How to Set ARS Press MENU button and select ARS while player is in the stopped position, When ARS is ON, recoding will pause automatically when there is no sound present so that you can save and minimize recording time ("ARS PAUSE" will appear repetitively while it is in action). When ARS is set to A-mode, the record process is performed within the current index one after another. When ARS is set to, Bmode, the record process is performed with next index one after another. New recoding will start after each pause. How to Check Remaining Recording Time In MENU, you can set the list of playback or recording in the order of playing time. The list of playing will appear in the order of amount of playback or remaining time during playback, and the list of recording will appear in the same order while recording. Recording Monitor Function If you connect an earphone with a player, you can monitor the content or sound during the recording process. Adjusting volume of a player cannot control volume of recording. Separating Files While Recording As for user's demand, files can be separated from each file. By pressing FF/KEY, you can record in the next index continuously so that you can easily distinguish from one index after another. Caution -. Do not take out batteries during the process. Details of recording can be erased or be worked irregularly. You must take out them after you check the device stops working completely. -. If there are no more available numbers to save details of recording, you cannot record any more. If available amount of time that you can use for recording is filled up, it says "FULL" and lets you know immediately. Before recording, please check the available space, file or time that the player can offer, and erase unnecessary parts. (See No. 10 to learn how to erase recorded details) -. You cannot record as the route of MP3 or H/D. When the recording process once starts, the previous recording convert into A FILE of VOICE part, and then the process begins. (MP3 is only available for playback) How to Play Voice Part Choose the message that you want to listen. Choose one file among A, B, C and D, and select the file with FILE button. By moving PLAYBACK dial up and down, select the number of the message. It starts to play after pressing PLAYBACK dial. Adjust the volume with DIGITAL VOLUME button. Since it is super-mini speaker, you should be careful to listen to the messages in quiet places. If you are interrupted by noise, use an earphone. If you want to stop the player, press REC/STOP button. If batteries are used up completely, LCD will let you know it with "BAT (low battery)", and power will be turned off automatically after warning. Then, change batteries and start the player again. At first stage, you can listen to every message in the recorder from the first to the last one by pressing PLAYBACK button. If you want to listen to just one of messages and stop, press MENU button when the player does not work. And then if MODE appears on screen, choose "OFF" by selecting "CONT" with PLAYBACK dial. Playback of MP3 Convert to MP3 by using FILE button. If you do not have any downloaded songs through USB, "MP3" sign will be on your LCD screen. MP3 music files can be played by PLAYBACK dial after downloading through USB. Backward and Forward Playback While Playing You can check both next and previous messages by moving PLAYBACK dial upward and downward while it plays one message. To keep pressing PLAYBACK dial can bring messages forward or backward fast. (SEARCH function) Search & Play If you press PLAYBACK dial for 2 seconds, the recorder will play its every message for just 10 seconds orderly. While the recorder is scan-playing, if you press PLAYBACK dial one more time, you can hear the message of the number you chose. As for playback of MP3, its Search & Play function also works. Repetitive Playback of VOICE files By pressing REPEAT button while playing, LCD screen will let you see "RPT", And that is going to make one message repeat forever unless you stop it by pressing REPEAT button one more time. Repetitive Playback of MP3 Files If you press REPEAT button when the device plays, you can choose one of various kinds of repeat mode (NORMAL/1 TRACK/ALL TRACK/RANDOM). NORMAL: Playback of all songs and stop 1 TRACK (RPT): repetitive playback of one song ALL TRACK: Repetitive playback of all songs RANDOM: Playback of all songs by random choice A B Repeat Playback "A B" sign shows up when you press REPEAT button for more than 1 second whenever you want to repeat the playback. If you press REPEAT button again, "A B" sign shows up, and the part that you choose starts playing repetitively. By pressing REPEAT button again, it stops playing. You cannot choose more than 2 messages subsequently with REPEAT playback. MP3 files can be played by the way of A B repeat playback. Various Equalizer Function If you play MP3 music files, Equalizer Function will help the player play different genres-NORMAL, ROCK, JAZZ, CLASSIC, POP and etc. Select one of MP3 files and choose Equalizer function as your menu by moving the button back and forth. Deleting massages is only possible when the player stops it's work completely. Deleting Messages One by One Choose one message that you want to erase. Select the message by moving FILE button and PLAYBACK dial. Push ERASE button for 1 second, and LCD will display "ERS". The recorder plays the message to make you sure. While "ERASE" is flickering on LCD screen, the message is erased completely, Once message is deleted, numbers of messages on LCD are shifted for each message. While "ERASE" sign is blinking, if you press other buttons, Delete function is cancelled. Caution: You can never restore deleted messages. Deleting All Files and Messages Select the file that you want to delete. To press ERASE button and FILE button together for 1 second erases selected file and "FL.ER" sign. All files are deleted by pressing ERASE button again. VOICE FILES/ ALL ERASE "AL.ER" sign appears by pushing ERASE button for 5 seconds. If you push ERASE button again when "AL.ER" sign disappears, recorded messages on files are all deleted. ALL ERASE deletes not MP3, H/D files but A/B/C/D files among VOICE files MP3 DELETE can erase not only a single music file but also all MP3 files, and H/D DELETE can be removed through USB. Caution If you used up all of memory of hard disk, it is impossible to save recorded or MP3 files. Please clear off useless files before use. Cancel of TIMER/REC Change "ON" to "OFF" in the second step of TIMER/REC (Cancel) For TIMER/REC, SET mode and time need to be fixed. Stop during TIMER/REC Press MENU buttons, "MODE" appears on LCD screen. Press REC button Set “TMR(Timer)” by moving and pushing PLAYBACK dial. Delete "ON" by shifting PLAYBACK dial and set PLAYBACK dial. DAT(DATE) flickers. Each number for year (Y), month (M) and day (D) will flicker one by one by pressing PLAYBACK dial so that select numbers by moving the button. Press PLAYBACK dial and fix the number. "STRT(START)" sign will appear on LCD, and then specific time for TIMER/REC will flicker. Press PLAYBACK dial in the same way of 4. "END" sign is on LCD now, and end time for TIMER/REC will flicker. Then, do it in the same way of 5. Finally, if you press MENU button again, a small picture of watch Caution -. Only one item of TIMER/REC is possible -one for each VOICE files/FM radio -. Before you start TIMER/REC, check amount of possible time. If time for recording takes longer than available time, TIMER/REC is impossible. However, if you set the schedule every week or everyday for TIMER/REC, it is possible to set TIMER/REC mode even though recording time is shorter than available amount of time for recording. In case that you want to record weekly (at same time) -. If selected files are filled with 99 recorded messages already, and memory is full, TIMER/REC cannot operate its function appropriately. Recall DATE of TIMER/REC on the LCD screen. -. TIMER/REC should be set for less than 24 hours. Move PLAYBACK dial upward and downward, and select day. -. If the start time of recording is before 23: 59, and the ending time is later than 00: 00, the ending time is set as the next day. will be on LCD screen. SUN Sunday, MON Monday, TUE Tuesday, WED Wednesday, THU Thursday, FRI Friday, SAT Saturday Set it up with the PLAYBACK dial. Set time of TIMER/REC. In case that you want to record at the same time everyday Recall TMR(TIMER) on LCD screen in order(1~2). Move PLAYBACK dial upward and downward, and select DLY(DAILY). Set up the time you want to record with PLAYBACK dial. Set it up TIMER/REC. -. If TIMER/REC starts its process while ALARM/PLAY function is working, press the stop button and start TIMER/REC function again. -. If TIMER/REC starts to record a message while other function is on except recording, press stop button and start TIMER/REC function again. If TIMER/REC function starts its work when the player is already recording something else, recording process keeps working, and TIMER/REC function stops. If you want to play messages at the same time everyday How to Set ALARM/PLAY Function ALARM/PLAY is the function which automatically starts the message that you selected before. Set ARM(ARAM) up "ON" in the same way with step 1~3 of setting ALARM/PLAY function. Bring the message that you want to play with ALARM/PLAY function on LCD screen.(See No. 1 of How to Play to know specifically) By moving PLAYBACK dial up and down, select "DLY(DAILY)" and set up By moving PLAYBACK dial up and down, bring "ARM(ALARM)" sign on screen and set the function. (By moving MENU button, "MODE" sign will show up) Set up the time you want to record with PLAYBACK dial. When "On" and "OFF" signs flicker together on screen, choose "ON" and set up "ON". Then, "DAT(DATE)" sign shows up. When "Y(year)", "M(month)", "D(date)" appear on screen in order, select numbers and press PLAYBACK dial. Set up ALARM/PLAY time in the same way with the step 7~8 of setting ALARM/PLAY function. When You Want to Cancel ALARM/PLAY function If you want to cancel, select "OFF" in the third procedure of setting ALRM/PLAY function. If you want to make changes, follow the procedure for setting ALARM/PLAY function. Do it in same way to set time when "TIME" sign appear on screen. By pressing MENU button, alarm sign, " screen. " will be in sight on LCD Play the selected message when time has come. When the player stops playing, it stops its whole function automatically and go back to the beginning part of the message. If you want to listen to the message again, press PLAYBACK dial. If you want to play the same message at the same time once in every week Follow the same steps and procedures of 1~3 on setting ALARM/PLAY function, and set ARM(ARAM) up "ON". By moving PLAYBACK dial up and down, select days of the week. SUN Sunday, MON Monday, TUE Tuesday, WED Wednesday, THU Thursday, FRI Friday, SAT Saturday Set days of the week you want with PLAYBACK dial. Set up ALARM/PLAY time in the same way with the step 7~8 of setting ALARM/PLAY function. Caution -. If ALARM/PLAY and TIMER/REC function are set to start at the same time, LCD screen displays "RESET", and ALARM/PLAY function will not operate correctly. -. If requested time of ALARM/PLAY plays during the normal recording process, ALARM/PLAY function will start to work after all the normal recording process is completed. -. When requested time of ALARM/PLAY functions plays while the player is in the MENU mode, MENU mode disappears, and ALARM/PLAY starts the process. -. If you delete the selected ALARM/PLAY message, the alarm function becomes disabled. -. If requested time has come while you are deleting the message, the message will be played while the deleting process stops. -. If you set up the schedule to play once every day or every week, the order is not cancelled even after you stop ALARM/PLAY function. How to Connect with External Microphone -. Put the plug of a microphone into the external microphone terminal of the player. When the external mike is connected with the microphone terminal of the player, internal microphone does not work. Connection with external appliances The message that you recorded with DDR-3000 SERIES through audio cable and telephone adaptor(for either portable or domestic use) can also be recorded with other external appliances such as cassette players or MD. And recording of the messages of wireless or domestic telephones is possible through this player. How to Connect with Record Players When you want to record in VOICE RECORDER through external appliances: Connect audio cable with the earphone terminal of stereo components and with the microphone terminal of VOICE RECORDER together. When you want to record in external appliances through VOICE RECORDER: Connect audio cable with the microphone terminal of external appliances and with the earphone terminal of VOICE RECORDER together. Recording from external appliances When you record certain messages from external appliances, turn down the volume of the appliance, and then connect audio cable with it and start to record. When recording, set up the volume of the appliance to the medium level, and try not to change it during the recording process. When you record through external appliances Start operating external appliances with VOICE RECORDER. (Starting time of players is all different from each other. Check and understand working and operation of appliances. How to Record the Conversation over Telephone Connect audio cable to the microphone connector of VOICE RECORDER and to the distributor of a component equipment. Connect telephone cable of component equipment to the distributor. Attach a cord, which connects the receiver and telephone, to the distributor. Connect one side of telephone wire to main body of telephone. If you press REC button of VOICE RECORDER, you can record conversation over the telephone. How to connect the supplied telephone adapter How to Record Conversation over Cellular Phone How to Connect with Stereo Components Caution When you connect to external appliances, turn off the power and start the connection process. When you connect to external appliances, read through the its manual and understand it fully before you start to use and operate them. Connect the cord of cellular phone to the microphone connector of VOICE RECORDER and to the earphone jack of cellular phone. By the earphone connected with wire of cellular phone, the conversation is recorded. How to connect the cellular phone adapter Note: This function is available only for the models that have the radio function. If you want clearer sound when you listen to the FM radio, use the supplied earphones which will act as an antenna. AUTO SEEK is convenient function when you listen to the radio. If you press and hold the FF or REW button for 2 seconds, it will stop automatically on the radio stations that the player can receive signals to. Sometimes AUTO SEEK functions cannot TUNE to the stations accurately. In this case, control minutely with the REW or FF button. How to Set Radio Channels(Stations) Select Radio Mode by pressing RADIO button. LCD will display waves. Select the station that you want to listen to by using the FF/REW button. How to Save Radio Stations Press RADIO button, and select RADIO mode. LCD will display waves. Select the station that you want to listen to by using the FF/REW button. If you press PLAY button, "01" sign will flash on the screen where "FM" sign appeared. Then, choose the channel that you want to save to (1~10) by using the FF/REW button, and press PLAY button. "FM" sign shows up as the channel is saved. In the same way, you can save up to 10 channels. Confirming saved channels If you press MENU button for 1 second, saved channels and signals will show up. Then, confirm savings with FF/REW buttons. Again, press MENU button for 1 second and choose signals and stations that you want to save. How to Record Radio Broadcast Select the radio station that you want to record following the step 1~2 of "How to Save Radio Stations". Press REC button and start recording. In this case, the recorded message is saved in the index and VOICE files. If you stop playing MP3 and choose radio mode, the message is recorded in A file of new index. You cannot check the condition of message while recording. After stop recording, you can see the condition in VOICE part. If you want to check the condition of recorded message, see 11. of "How to Play in VOICE mode" DVR-Explorer is a managing program for DDR-3000 SERIES which transfer or plays MP3 files from computer to DDR-3000 SERIES, it manages recorded voice or FM radio file (DVF) from DDR-3000 SERIES and has following features. Transferring(upload/download) file to/from the DDR-3000 Series MP3,DVF and normal data files Similar structure as Window Explorer(r) for file managing Plays MP3, MP2, WAV, Audio CD, playlist DVF/WAV two way convert Convenient transfer of file using transfer list Various spectrum, equalizer, effect support CDDB feature Convenient instruction manual Minimum System Requirement for the DDR-3000 Series software: Pentium 200MHz 64MB Memory 20MB Empty Hard Disk Space 256bit Color Window 98/ME/2000/XP(NT Not Supported) USB Port CD-ROM Drive Sound Card, Speaker or Headphone(option) (6) Searched USB driver file and click on ' NEXT ' button. (1) Insert the DDR-3000 Series setup CD into the CD-ROM drive and it will start automatically. If Auto-run doesn't work execute setup file "CD-ROM:\setup.exe" or "CD-ROM:\Voice Bank\setup.exe". Setup will progress automatically. Once setup is completed software icon will be installed in the START Menu. (2) Using the supplied USB Cable connect the USB port terminal on the DDR-3000 Series to USB port on the Computer (PC ONLY). Then, "New Hardware detected" will execute and end automatically. Restart System to complete the software setup. (3) Connect DDR-3000 SERIES to the PC using the USB cable. 'New Hardware Detected' will run automatically, then click on 'NEXT' button. (7) Click on ' NEXT ' button to finish wizard. (8) Once USB drive setup is completed, check for setup progress from device manager at My Computer. (4) Select 'Search suitable drive for device' and click on ' NEXT ' button. (5) Select CD ROM drive and click on ' NEXT ' button. If DDR-3000 SERIES is not after software is opened. Check for USB device on PC, and for proper connection of Cable. (2) Managing DVF file and MP3 file Figure of Software Play Manage Window File Manage Window File Manage Window Flash Memory Manage Window Folder Manage Window Transfer list Manage Window Flash Memory Manage Window (1) Paying MP3, WAV, CD and DVF Double click on MP3, WAV, Audio CD Track and DVF file on file control window or use drag and drop to playlist for instant play. Also, you can select file then press play. Through LCD window progress of music and title scrolls right to left, and you can see two kind of magnificence spectrum window. Play and stop files through control panel on the right side of the screen. Adjust volume by using +,- button. Click on red position bar to move the position of current playing music. File managing using the software is very similar to Window Explorer(r). Left part of the window shows the hard disk (Computer Info) and CDROM drive installed in system with it's inside folders. Right part of the window shows various files inside folders. Default setting is set to show all types of files on the screen, but you can select DVF files or other various files by using filter function on the upper right corner Also, transferring and copying of the files can be used in the same way as explorer. Using this file managing function separating and keeping DVF files in other folders are possible. (3) Flash Memory Managing of DDR-3000 SERIES Bottom section of the Software is the area which manages the flash memory installed in the DDR-3000 Series and also includes the Transfer List. When the DDR-3000 Series is properly connected it will display a red light with a phrase stating 'Voice Bank is Working' just like the picture at the top. The MP3 files (files) which the user sends to the flash memory on the DDR-3000 Series will appear on bottom right window and file size and remaining space of the memory will be marked on the Memory used screen. (4) Buttons Button Function Particular information print Prints file list in flash memory. reload Re-reads the information on flash screen. delete Choose the file stored in flash memory, then press this button to delete the file. Choose the files to be move to flash memory for file Transfer to flash manage window, then click this button to transfer memory (download) selected file to flash memory. Transfer to computer It is used to move file to computer from flash memory. DDR-3000 Software displays multiple spectrum screens. Default setting is same as the picture at the bottom, but screen can be change in various ways by clicking on the left mouse button. Spectrum screen of DDR-3000 series software 1 This changing spectrum screen can be used by users taste. Following pictures are example of some features. Spectrum screen of DDR-3000 series software 2 Can't upload MP3 files. Just like managing folders in the computer, the memory on the DDR3000 Series is divided into 6 albums and can be played by each album. Spectrum screen of DDR-3000 series software 3 Album select buttons. Button Function Select voice folder Particular information Used only in voice record mode Save/create DVF files Select MP3 folder Used in MP3 mode Select HD folder Used in HD mode(portable HD) Spectrum screen of DDR-3000 series software 4 Spectrum screen of DDR-3000 series software 5 Various Equalizer and Sound Effects can be use to listen to the music/voice file. It's very simple to transfer MP3 file to DDR-3000 SERIES. Mentioned up at top, select MP3 files from file manage window and choose on folder manage window. Then, drag and drop files to flash memory manage window. Also, click on icon from flash memory managing section for same reaction. Transferring MP3file as following. Select from folder manage window, Select MP3 file from file manage window. The way to transfer DVF file to DDR-3000 Series is: choose from Album Managing section then left mouse click on the file you want transferred, select icon. Procedure is same as transferring MP3 file to the DDR-3000 Series.Receiving DVF files to computer. Choose from folder managing section, and click DVF files that you will transfer to the computer from flash memory managing section. Click 'upload to computer' Click 'downlod to flash memory' . . upload to computer Selected DVF file being transfer to computer will displays as follows. downlod to flash memory Selected MP3files are being downlod to flash memory of DDR-3000 SERIES. The way to transfer DVF file to DDR-3000 Series is choose from Album Managing section then left mouse click on the file you want transferred, select icon. Procedure is same as transferring MP3 file to the DDR-3000 Series. Through steps 5). 6), you can easily transfer DVF or MP3 files in the flash memory. Once the transfer is over, status bar displays the size of the transferred file and use of memory. +To transfer multiple file at once use "+" button or drag and drop to place files in transfer list. It's convenient when sending files from different folders to the DDR-3000 Series. Deleting MP3 or DVF files stored in flash memory in the DDR-3000 Series is same as deleting files in Windows Explorer(r). Select one of the stored file from the flash memory by clicking on the left mouse button, then press 'delete' button from tool bar in Flash Memory Managing section. Through following steps, you can delete MP3 and DVF files from flash memory. Select file to be deleted, then from click on 'delete' the tool bar. button from Transferring files from transfer list is shown below. DVF file Transfer all the files in transfer list to flash memory. MP3 file Confirming deletion of file. Choose yes to delete file. Now file will be deleted from the flash memory in the DDR-3000 Series. From flash memory managing display, pop-up menu will appear by clicking right button of the mouse. Deleting and transferring is possible from this menu. Just like formatting a hard disk on a computer, the flash memory used in the DDR-3000 Series can be reset (formatted). All the data in the flash memory will be lost when formatting. Select "File" from the main tool bar, then select 'Format Flash Memory' to format the flash memory. It's easy to manage MP3 and DVF files using the DDR-3000 Series Software. Make a new folder in the location you want(this can be done by right mouse clicking on the New Folder icon), copy and save frequently used MP3 and/or DVF files. And, useless MP3 and DVF files can be easily deleted by using delete button. Select file, then click 'copy' From flash memory managing window click on the right button of the mouse for pop-up menu. Flash memory can be deleted from this menu. from tool menu. Locate New folder/folder you want to copy files to, then use 'paste' from tool menu. When format window appears press 'start' to start formatting. Files are copied and saved at designated folder. 1) Voice Recorder Special Features Play/Record DVF file Voice mail function: auto appending at mail program Creates self play function : voice file+player Edit DVF file : delete/insert beginning, ending, and/or middle of recording 16various voice effect Mail Manager is a program that plays self created voice files (DVF files) from the DDR-3000 Series. It can send voice mail or record and store conference meeting and lectures (recording). Mail Manager allows sending and receiving of voice mail through e-mail or network without typing or writing letters. To send voice mail using Mail Manager use a DVF file recorded from the DDR-3000 Series, or simply press record and send recorded voice file without any difficulties, and If recorded DVF file from mail manager is sent to the DDR-3000 Series, it can be played through the DDR-3000 Series. Mail Manager supports mail programs like (Exchange, Internet mail, Outlook, Outlook Express, and Netscape)((r)), by using drag and drop/cut and past sending voice mail through other mail program and network program is possible. Mail Manager can create small sized files that combine voice data and player in a executable (.exe) file format, voice mail can be sent and heard even when receiver does not have the Mail Manager software. Changing the original voice through the use of the various Voice Effects like reverb, echo, robot voice, helium voice makes interesting/fun voice mails. Has Voice mail, Voice memo function, record and play of compressed feature of high sound quality DVF file. Play Pause/Stop Record (Half way insertion record possible) Move forward Move Backward 2) Convenient use method Auto-append of voice mail to mail program. Sending: voice file+player(EXE) (In case, the receiver doesn't have MailManager) Press 'record'button Say the message Press 'Stop' button Finally press 'send' button and mail window with voice mail attached will apppear. Proper volume level is required for record and play. Adjust wave volume from [control volume] of window to set play volume, and adjust [option] [properties] [record] from volume adjust window select [microphone] for microphone record volume. 3) Production of self play function Createsa small executable file combined with voice file and player. If self player formed mail is sent receiver can listen to it even without mail manager. From 'save as' save in 'voice mail+player' from and it will create self player with executable file(.exe) 4) 16Digital voice effect Change recorded voice to various voices. 5) Drag and Drop If use drag and drop function of mail manager attaching voice mail to other mail program or network emulator not supported by mail manager will be possible. Press left button of mouse on drag and drop To add voice mail to other program. Now, Use two drag and drop icon, choose between voice file+player. Voice file+player(.exe) DDR-3064/ 3064R DDR-3128/ 3128R DDR-3256/ 3256R Recording SHQ: 136min HQ : 272min time SP : 544min SHQ: 272min HQ : 544min SP :1088min SHQ:544min HQ:1088min SP :2176min SHQ:1088min HQ :2176min SP :4352min Recording mode File 6) Simple edit function Deleting of front By simple edit function deleting of front and rear part of recorded massages are possible, and after recording if mis-record is found, delete the error and just record that part again. delete front part of current position delete rear part of current position DDR-3032/ 3032R MODEL VOICE RECORD Deleting of front 7) Supported mail program Exchange Internet mail Outlook Outlook express Netscape(manual attack of voice mail) FM radio (stereo/ option) Auto recording cording FM radio Wireless mike External mike Recording medium Signal vs noise rate Distortion Frequency respond Output Repeat Continuous play Search play search Signal vs noise rate Distortion Frequency respond Output Frequency range 8) Shorten Keys Support of shorten keys, control of mail manager is possible while using other program. F2 : Play F3 : Rewind F4 : Fast Forward F5 : (Pause/Stop) Bit rate Signal vs noise rate Distortion MP3 Frequency respond earphone Play mode Search play SHQ(14.8Kbps) / HQ(8Kbps) / SP(6.4Kbps) A/B/C/D Total 396 messages with 4 separate files(99 messages in each file) Automatic Recording System(A-Saving in one index after another, B-Saving in next index) World Standard FM /Japanese FM 76.8or77.6MHz / 88or88.8MHz Combination of wire and microphone Hidden Flash Memory 60db (62db input 1Khz , speaker output 50mW : 32Kbps) 1.5% 0.2 (62db input 1Khz , speaker output 50mW : 32Kbps) 300Hz~4.0Khz(-6db) Maximum 80mW (Speaker8ohm) Repeat one message & A-B repeat function Playback of one or every message in files Playback of every message for 10 seconds Search for convenient and easy files or messages 60db at 1mv 98.1MHz 0.8%(max) at 1mv 98.1MHz ?f=22.5KHz 350Hz 30Hz,3KHz 0.25KHz(100Hz~10KHz,60dbuV) Max 80mW(speaker 8ohm) World Standards: 87.5 ~ 108MHz Japanese Standards: 76 ~ 90MHz 32Kbps~320Kbps(MPEG 1/2 LAYER 3) 85db up (1KHz input 0db) 0.3% 0.05 (1KHz input 0db) 20Hz~20Khz Maximum5mW (16ohm) EQ: NORMAL, ROCK, POP, CLASSIC, LIVE Playback of each track for 10 seconds Easy to find convenient and easy tracks Search Repeat Playback of one track or all tracks & optional playback USB 1.1 Network Hard disk space of more than CPU 200MHz, RAM 64Mb and 20MB System requirement PC windows98 , windows2000 , windows ME , windows XP OS interface Sound Bluster 16 Sound card More than 640X480 Display External mike 3.5 plug-in power microphone(mini plug/stereo) IMP less than3K In/out Earphone 3.5 earphone(mini plug/stereo) IMP less than 16 put HOLE : 2.75, Dia : 0.65 DC JACK division Mini jack (PC : A TYPE) USB 23(IMP 8 ) Speaker Diameter 80mw(Maximum Sound) Output Digital Sound(30 Levels) Volume BLUE EL/ BACK LIGHT 32M/64M/128M/256M Hard disk storage Nand Flash Memory(32M/64M/128M) Memory Sign of Recording LED(Red) LED A/B/C/D/MP3/HD File 01~99 voice Indexes and 01~99 MP3 Tracks Message SHQ/HQ/SP Mode LCD (TN) Equalizer NOR ,ROC ,POP ,CLA, LIV. Etc. (5 kinds of equalizer) 0h00m00s remain/count A-B REPEAT / ONE REPEAT / NORMAL REPEAT / ALL REPEAT Repeat DC3V/200mA(CE,CUL,T,FCC) Adopter FF, PLAY, REW, MENU, FILE, REC/STOP, Function key RADIO, ERASE, VOLUME, REPEAT, HOLD DC 3V , LR03 , Alkaline Battery x2EA('AAA" size or UM-4) Power About 15 hrs. with medium level of volume through earphones Play MP3 About 15 hrs. with medium level of volume through earphones Battery Play VOICE About 9 hrs. with medium level of volume through speaker period Play VOICE About 12 hrs. with medium level of volume through earphones Receiving radio About 8 hrs. with medium level of volume through speaker Receiving radio Connecting cable with external appliances (1)/ Installation CD (1)/Adaptor to Accessories record the telephone conversation (1)/Stereo Earphone (1)/External microphone (1)/Batteries (2)/USB cable (1)/Manual (1)/Neck strap(1) Remote controller Remote Control (Function/PLAY/FF/REW/REC) size 99.8 31 14.1 MP3 When damage to device occurs, stop the use of the product and request for after service from our customer support staff at DIASONIC TECHNOLOGY CO. LTD. Phone : 82-31-474-0852 We offer free repair service for products that malfunction under normal use, up to 1 year from the original purchase date. If breakdown occurs during warranty period mail product and the warranty card. Warranty will be invalid if purchased date, purchase price and place of purchase are missing from the receipt. Please check and if the information is not written on the product refer to customer service at DIASONIC TECHNOLOGY CO. LTD. This warranty will not be reissued, so keep it safely. <Free repair regulation> 1. Our product has gone through strict quality control and inspection If breakdown occurs from normal condition during warranty period, you may receive free repair from our customer service department. 2. Even during warranty period, following situation will not grant free repair service. 1) If you do not have a warranty card 2) If purchased year, month, day, name of customer and sales market are not written on the warranty card. Or if written information is modified. 3) Breakdown or damage by mishandling of user 4) Breakdown or damage by users own repair or modification. 5) Breakdown or damage caused by fire, pollution, and any natural disaster. 6) Breakdown or damage caused by lealcage from battery. 7) When accessories(battery) need replacement. <Request when mailing> Please beware of following when mailing. 1. Contact our customer service department to receive a RMA # before mailing in the product. 2. Please enclose warranty card with the product when mailing during warranty period. Please wrap in shock absorb material and put in box, mailing fee, wrapping fee, and any damage caused during mailing will be charge to a customer. 3. To prevent loss, please use registered mail. WARRANTY CARD Product Category: Digital Voice Recorder Model: DDR-3000 SERIES The Term of Guarantee: 1 Year Date of Purchase: . . . Name PURCHASER Address SELLER Telephone Name Address Telephone Please refer to our customer service department for any information or breakdown on the product. Exchange, repair(charge. free), refund and parts keeping period is depended on regulation of customer protection Any questions or if you want to know more information about the product please contact DIASONIC TECHNOLOGY CO. LTD. DIASONIC TECHNOLOGY CO. LTD. #321-43, Suksu-Dong, Manan-Gu, Anyang-City,Gyeonggi-Do, Korea Telephone No. - Representative No. : +82-31-474-0852~5 - FAX No. : +82-31-474-0856 Homepage : http://www.diasonic.com