Download Viking VCWH3648SS Installation guide

Viking Installation Guide
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
UL
F20470G EN
C
UL
(033111)
Professional Hoods
Table of Contents
IMPORTANT–Please Read and Follow!
Warnings & Important Information________________________________________________________ 3-4
VWH 10”H. Wall Hoods w/Standard Ventilator 24”, 30”, & 36”
Dimensions & Specifications _____________________________________________________ 5
Clearance Dimensions ___________________________________________________________ 6
Interior Ventilator Dimensions ____________________________________________________ 7
VWH 18”H. 24”/27” Deep Wall Hoods 24”, 30”, 36”, 42”, 48”, 54”, 60”, & 66”
Dimensions & Specifications ______________________________________________________ 8
Clearance Dimensions _____________________________________________________________ 9
Interior Ventilator Dimensions _____________________________________________________ 10
Exterior Ventilator Dimensions ___________________________________________________ 11
VWH 18”H. T-Series Wall Hoods 36”, 48”, & 60”
Dimensions & Specifications _____________________________________________________ 12
Clearance Dimensions __________________________________________________________ 13
VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”
Dimensions & Specifications _____________________________________________________ 14
Clearance Dimensions __________________________________________________________ 15
Interior Ventilator Dimensions ___________________________________________________ 16
Exterior Ventilator Dimensions ___________________________________________________ 17
VIH Island Hoods 36”, 42”, 54”, & 66”
Dimensions & Specifications _____________________________________________________ 18
Clearance Dimensions ___________________________________________________________ 19
Interior Ventilator Dimensions ___________________________________________________ 20
Exterior Ventilator Dimensions ___________________________________________________ 21
VCIH Chimney Island Hoods 36”, 42”, 54”, & 66”
Dimensions & Specifications _____________________________________________________ 22
Clearance Dimensions ___________________________________________________________ 23
Interior Ventilator Dimensions ___________________________________________________ 24
Exterior Ventilator Dimensions ___________________________________________________ 25
VBCV Wall Custom Ventilator System
Dimensions & Specifications _____________________________________________________ 26
Installing Hood Canopy _________________________________________________________ 27
Clearance Dimensions ___________________________________________________________ 28
VBCV Ventilator Dimensions _____________________________________________________ 29
VICV Island Custom Ventilator System
Dimensions & Specifications _____________________________________________________ 31
Installing Hood Canopy _________________________________________________________ 32
Clearance Dimensions ___________________________________________________________ 33
VICV Ventilator Dimensions ______________________________________________________ 34
Planning Information________________________________________________________________ 36
Installation Procedures
Installation (VWH 10”H. Wall Hoods w/Standard Ventilator) __________________________ 37
Duct Cover Option (VWH 10”H. Wall Hoods w/Standard Ventilator)___________________ 39
Installation (VWH 10”H. Wall Hoods w/Recirculating Kit) _____________________________ 39
Installation (VWH 18”H. Wall & VCWH Chimney Wall Hoods) ________________________ 42
Duct Cover Option (VWH 18”H. Wall Hoods)_______________________________________ 43
Duct Cover Option (VCWH Chimney Wall Hoods) __________________________________ 44
Installation (VIH/VCIH Island Hoods) ______________________________________________ 45
Service & Registration_______________________________________________________________ 47
2
NOTE: If installing hood with warming shelf panel,
install warming shelf panel first.
WARNING
To reduce the risk of fire, electric shock, or injury
to persons, observe the following:
IMPORTANT – PLEASE READ AND FOLLOW
• Before beginning, please read these instructions
completely and carefully.
• Do not remove permanently affixed labels, warnings, or
plates from the product. This may void the warranty.
• Please observe all local and national codes and
ordinances. If no local codes are applicable, wire in
accordance with the National Electrical Code,
ANSI/NFPA 70-latest edition.
• Damp environment approved models should be installed
in a covered non-enclosed area and should be protected
from the elements as much as possible.
• The installer should leave these instructions with the
consumer who should retain for local inspector’s use and
for future reference.
• Check with a qualified and trained installer or local codes
for makeup air requirement, if any.
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
1. Installation work and electrical wiring must be
done by qualified person(s) in accordance with
all applicable codes and standards, including
fire-rated construction.
2. Sufficient air is needed for proper combustion
and exhausting of gases through the flute
(chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards
such as those published by the National Fire
Protection Association (NFPA), and the
American Society for Heating, Refrigeration and
Air Conditioning Engineers (ASHRAE), and the
local code authorities.
3. When cutting of drilling into wall or ceiling, do
not damage electrical wiring and other hidden
utilities.
4. Ducted fans must always be vented to the outdoors.
5. WARNING!: To reduce risk of fire, use only
metal ductwork
6. CAUTION!: To reduce risk of fire and to
properly exhaust air, be sure to duct air outside.
Do not vent exhaust air into spaces within walls
or ceilings, or into attics, crawl spaces, or
garages.
7. CAUTION!: To Reduce the Risk of Fire and
Electric Shock, Install this rangehood only with
remote blower models manufactured by Viking,
model numbers – DEV900/DEV1200,
VEV900/VEV1200, OR DEV1500, VEV1500 or
integral blowers manufactured by Viking, model
numbers – DIV300, DIV440, DIV600, DIV800,
DIV1200, VIV300, VIV600, or VIV1200. NOTE –
Please refer inside for specific canopy/blower
combinations.
This hood is for residential installation only and is not
designed for installation over a commercial product. Make
sure power is off at the main circuit breaker or fuse box
before making connections. To avoid risk of fire, electric
shock, or injury to persons, turn off the electricity to the
hood from the power supply before servicing or cleaning.
Viking hoods are equipped with variable speed control
blowers. These units will not function with a single speed
ventilator. All Viking Range ventilator kits are designed
specifically for use with Viking Range hoods. Use of any
non-Viking Range ventilator kit will void the hood warranty.
Viking hoods are equipped with the variable speed
controls for blowers. These units will not function with a
single speed ventilator. All Viking ventilator kits are
designed specifically for use with Viking hoods. Use of any
non-Viking ventilator kit will void the hood warranty.
READ AND SAVE THESE INSTRUCTIONS
3
IMPORTANT–Please Read and Follow!
Dimensions & Specifications
(VWH 10”H. Wall Hoods w/Standard Ventilator 24”, 30”, & 36”)
WARNING
To reduce the risk of injury to persons in the
event of a rangetop grease fire, observe the
following. (Based on “Kitchen Firesafety Tips,”
published by NFPA.)
1. SMOTHER FLAMES with a close fitted lid, cookie
sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames do
not go out immediately, EVACUATE AND CALL
THE FIRE DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN. You may be
burned.
3. DO NOT USE WATER, including wet dishcloths or
towels a violent steam explosion will result.
4. Use an extinguisher ONLY if
• You know it is a Class ABC extinguisher, and you
already know how to operate it.
• The fire is small and contained in the area where
it started.
• The fire department is being called.
• You can fight the fire with your back to an exit.
1
(30 2 ”
.5
cm
)
(7. 3”
6
cm
)
1
(25 0 ”
.4
cm
)
A (Hood width)
24”W.
23-7/8“ (60.6 cm)
30”W.
29-7/8“ (76.2 cm)
36”W.
35-7/8” (91.1 cm)
”
21 cm)
A
.3
(53
CAUTION
For general ventilating use only. Do not use to
exhaust hazardous or explosive materials and
vapors.
NOTE: Optional duct cover sold separately.
VWH 10”H. Wall Hoods w/Standard Ventilator
WARNING
Description
Duct cover width
TO REDUCE THE RISK OF FIRE,
ELECTRICAL SHOCK, OR INJURY
TO PERSONS
Rangehoods must be installed with
the ventilators that are specified on
their carton indicating suitability with
this model. Other ventilators cannot be substituted.
24”
30”
36”
23-7/8” (60.6 cm)
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm)
Number of lights
2
Number of filters
2
N/A
Heat lamps
Interior ventilator kit
460 CFM Standard
7” (17.8 cm)
Interior duct size*
5.6
Interior—Maximum amps
* Disregard when using recirculating kits.
460 CFM blower is shipped with hood.
4
5
Interior Ventilator Dimensions
Clearance Dimensions
(VWH 10”H. Wall Hoods w/Standard Ventilator)
(VWH 10”H. Wall Hoods w/Standard Ventilator)
Top View
24”W.
30”W.
36”W.
60
24
(61”mi
.0 n.
c
27 to m)
”m
(68 ax
.6 .*
(15 ”m
2.4 in.
c
63 t o m)
”
(16 ma
0.0 x.
cm
)
cm
)
”
3 6 cm )
.4
(91
A
23-7/8” (60.6 cm)
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
24”W.
30”W.
36”W.
B
5-1/4” (13.3 cm)
8-1/4” (20.9 cm)
11-1/4” (28.6 cm)
24”W.
30”W.
36”W.
C
11-15/16” (30.3 cm)
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
24”W.
30”W.
36”W.
D
5/8” (1.6 cm)
3-5/8” (9.2 cm)
6-5/8” (16.8 cm)
A
18”
(4.6 cm)
B
D
3-4”
(1.9 cm)
C
4”
(10.2 cm)
3-7/8”
(9.8 cm)
7” (17.8 cm) dia.
duct location
460 CFM Interior Ventilator Installation
* NOTE: When installing with a 24” high-shelf,
the 27” (68.6 cm) max. dimensions must be used.
6
7
1/2”
(1.3 cm)
3-1/2”
(8.9 cm)
Electrical
hookup
Dimensions & Specifications
Clearance Dimensions
(VWH 18”H. 24” Deep Wall Hoods 24”, 30”, 36”, 42”, 48”, 54”, 60”, & 66”)
(VWH 18”H. 27” Deep Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”)
(VWH 18”H. Wall Hoods)
A (Hood width)
24”W.
23-7/8“ (60.6 cm)
30”W.
29-7/8“ (76.2 cm)
36”W.
35-7/8” (91.1 cm)
42”W.
41-7/8” (106.4 cm)
48“W.
47-7/8” (121.6 cm)
54”W.
53-7/8” (136.8 cm)
60”W.
59-7/8” (152.1 cm)
66”W.
65-7/8” (167.3 cm)
24”D.
27”D.
1
(30 2”
.5
cm
)
(15 6”
.2
cm
1
(45 8”
.7
cm
)
)
B (Hood depth)
24” (61.0 cm)
27” (68.6 cm)
A
B
66
(16 ”m
7.6 in.
c
7 2 t o m)
”
(18 ma
2.9 x.
cm
)
NOTE: Optional duct cover sold separately.
VWH 18”H. Wall Hoods
Description
Duct cover width
24”
30”
36”
42”
23-7/8”
(60.6 cm)
29-7/8”
(75.9 cm)
35-7/8”
(91.1 cm)
41-7/8”
(106.4 cm)
48”
54”
60”
66”
47-7/8”
53-7/8”
59-7/8”
65-7/8”
(121.6 cm) (136.8 cm) (152.1 cm) (167.3 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm)
Number of lights
2
2
2
2
3
3
4
4
Number of filters
2
2
2
2
3
3
4
4
Heat lamps
1
1
1
1
2
2
2
2
Interior ventilator kits
Exterior ventilator kits
In-line ventilator kits
Interior duct size
VINV300/
VINV300/
600
600/1200
DEV900/
DEV900/
1200*
1200*
DIL900/1200 DIL900/1200
VINV300/
600/1200
DEV900/
1200*
DIL900/1200
30
(76”mi
.2 n.
c
3 6 t o m)
(91”ma
.4 x.
cm
”
36 cm)
.4
(91
VINV600/ VINV1200* VINV1200* VINV1200* VINV1200*
1200
DEV900/
DEV1200*/ DEV1200*/ DEV1200*/ DEV1200*/
1200*
1500**
1500**
1500**
1500**
DIL900/1200
DIL1200
DIL1200
DIL1200
DIL1200
7”
7”/10”
7”/10”
7”/10”
10”
(17.8 cm) (17.8/25.4 cm) (17.8/25.4 cm) (17.8/25.4 cm) (25.4 cm)
10”
(25.4 cm)
10”
(25.4 cm)
10”
(25.4 cm)
10” (25.4 cm)
Exterior duct size
Interior—Maximum amps
4.9/5.9
4.9/5.9
4.9/5.9
11.5
11.5
11.5
11.5
11.5
Exterior—Maximum amps
8.7/6.0
8.7/6.0
8.7/6.0
8.7/6.0
8.5/9.2
8.5/9.2
8.9/9.2
8.9/9.2
In-Line—Maximum amps
6.0/7.9
6.0/7.9
6.0/7.9
6.0/7.9
10.3
10.3
10.7
10.7
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
8
9
)
Interior Ventilator Dimensions
(VWH 18”H. Wall Hoods)
Exterior Ventilator Dimensions
(VWH 18”H. Wall Hoods)
Top View
Top View
A
A
18-3/4”
(47.6 cm)
1-1/16”
5-15/16” (2.7 cm)
(15.1 cm)
5/8”
(1.6 cm)
9-3/8”
(23.8 cm)
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
A
11-15/16” (30.3 cm)
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
23-15/16” (60.8 cm)
26-15/16” (68.4 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
4-5/8”
(11.7 cm)
9-1/8”
(23.2 cm)
120
V
9-5/8”
(24.4 cm)
7”(17.8 cm) dia.
duct location
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
B
23-7/8” (60.6 cm)
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
47-7/8” (121.6 cm)
53-7/8” (136.8 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
A
11-15/16” (30.3 cm)
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
23-15/16” (60.8 cm)
26-15/16” (68.4 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
6-7/16”
(16.4 cm)
9-3/4”
(24.8 cm)
3” (7.62 cm)
10” (25.4 cm) dia.
duct location
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
B
23-7/8” (60.6 cm)
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
47-7/8” (121.6 cm)
53-7/8” (136.8 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
B
300 or 600 CFM Interior Ventilator Installation for all Wall Hoods
900 or 1200 CFM Exterior Ventilator Installation for all Wall Hoods
Top View
Top View
A
18-1/2”
(50.0 cm)
A
5-15/16”
(15.1 cm)
5/8”
9-3/8”
(23.8 cm) (1.6 cm)
A
11-15/16” (30.3 cm)
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
23-15/16” (60.8 cm)
26-15/16” (68.4 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
120
V
2-1/2”
(6.35 cm)
B
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
8-1/4”
(20.9 cm)
5-1/2”
(14.0 cm)
120
V
9-1/4”
9-1/2”
(23.5 cm) (24.1 cm)
10” (25.4 cm) dia.
duct location
8-3/8”
(21.3 cm)
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
B
23-7/8” (60.6 cm)
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
47-7/8” (121.6 cm)
53-7/8” (136.8 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
B
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
A
11-15/16” (30.3 cm)
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
23-15/16” (60.8 cm)
26-15/16” (68.4 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
8-3/16”
(20.7 cm)
6-5/8”
(16.8 cm)
9-3/4”
(24.8 cm)
120
V
3” (7.62 cm)
2-1/2”
(6.35 cm)
10” (25.4 cm) dia.
duct location
B
24”W.
30”W.
36”W.
42”W.
48”W.
54”W.
60”W.
66”W.
B
23-7/8” (60.6 cm)
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
47-7/8” (121.6 cm)
53-7/8” (136.8 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
1200 CFM Interior Ventilator Installation for all Wall Hoods
1200 or 1500 CFM Exterior Ventilator Installation for all Wall Hoods
10
11
Dimensions & Specifications
Clearance Dimensions
(VWH 18”H. T-Series Wall Hoods 36”, 48”, & 60”)
(VWH 18”H. T-Series Wall Hoods)
Seal joints with silicone.
Provided on “T” Series only.
”
18
)
cm
.7
5
(4
1
(30 2”
.
5c
m)
”
“X
M /2”
I
D 4-1 m)
+ 1.4 c
(1
(15 6”
.2
cm
)
1
(45 8”
.7
cm
)
”
27 cm)
.6
8
(6
66
A (Hood width)
36”W.
35-7/8” (91.1 cm)
48“W.
47-7/8” (121.6 cm)
60”W.
59-7/8” (152.1 cm)
(1 6 ” m
7.6 in.
c
72 to m)
(18” m
2.9 ax.
cm
)
”
27 m)
A
.6
(68
c
30
(76 ”mi
. 2 n.
c
36 t o m)
”m
(91 a
.4 x.
cm
)
NOTE: Optional duct cover sold separately.
”
36 cm)
VWH 18”H. T-Series Wall Hoods
Description
Duct cover width
36”
48”
60”
35-7/8” (91.1 cm)
47-7/8” (121.6 cm)
59-7/8” (152.1 cm)
12” (30.5 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
Number of lights
2
3
4
2
3
4
Interior ventilator kits
VINV1200*
VINV1200*
VINV1200*
Exterior ventilator kits
DEV1200*/1500**
DEV1200*/1500**
DEV1200*/1500**
DIL1200
DIL1200
Number of filters
In-line ventilator kits
.4
(91
DIL1200
Interior duct size
10” (25.4 cm)
Exterior duct size
10” (25.4 cm)
Interior—Maximum amps
9.0
11.4
11.8
Exterior—Maximum amps
6.1/6.8
8.4/9.1
8.8/9.5
In-Line—Maximum amps
7.9
10.2
10.6
* A 1,200 CFM interior- or exterior-power ventilator should be used with all T-Series models and when indoor models are
installed over range/rangetop with gas char-grill. Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
12
Note: T-Series Models must be installed in a covered, non-enclosed area, and should be protected from
the elements as much as possible.
The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hood
should be installed 4-1/2” (11.4 cm) plus the distance between the back trim and surface from the back
wall. (Note: There is a 3” minimum clearance from the back trim to non-combustible surfaces, and a 24”
minimum to combustible surfaces.) This will require building the hood out from the wall. Any combustible
material used for this purpose must be covered with locally-supplied stainless steel. Viking also
recommends using a backsplash.
13
Dimensions & Specifications
Clearance Dimensions
(VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”)
(VCWH Chimney Wall Hoods)
A
A (Duct width)
30”W.
12“ (30.5 cm)
36”W.
12“ (30.5 cm)
42”W.
12“ (30.5 cm)
48“W.
18“ (45.7 cm)
54”W.
18“ (45.7 cm)
60”W.
24“ (61.0 cm)
66”W.
24“ (61.0 cm)
1
B (Hood width)
30”W.
29-7/8“ (76.2 cm)
36”W.
35-7/8” (91.1 cm)
42”W.
41-7/8” (106.4 cm)
48“W.
47-7/8” (121.6 cm)
54”W.
53-7/8” (136.8 cm)
60”W.
59-7/8” (152.1 cm)
66”W.
65-7/8” (167.3 cm)
(15 6”
.2
c
(30 2”
.5
c
to m)
2
(61 4”
.0
cm
)
m)
1
(45 8”
.7
cm
)
”
24 cm)
B
66
.0
(61
(16 ”m
7.6 in.
c
7 2 t o m)
(18 ”ma
2.9 x.
cm
)
NOTE: Optional duct cover sold separately.
VCWH Chimney Wall Hoods
Description
30”
36”
42”
48”
54”
60”
12” (30.5 cm) 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 18” (45.7 cm) 24” (61.0 cm) 24” (61.0 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm) to 24” (61.0 cm)
2
2
2
3
3
4
4
Number of filters
2
2
2
2
3
3
3
1
VINV600
2
VINV1200*
2
VINV1200*
2
VINV1200*
2
VINV1200*
DEV1200*/
1500**
DIL1200
DEV1200*/
1500**
DIL1200
DEV1200*/
1500**
DIL1200
DEV1200*/
1500**
DIL1200
1
1
VINV300/600 VINV300/600
In-line ventilator kits
DEV900/
1200*
DIL900/1200
DEV900/
1200*
DIL900/1200
DEV900/
1200*
DIL900/1200
Interior duct size
7” (17.8 cm)
7” (17.8 cm)
7” (17.8 cm)
Interior—Maximum amps
4.9/5.9
4.9/5.9
5.9
10” (25.4 cm)
11.5
11.5
11.9
11.9
Exterior—Maximum amps
8.7/6.0
8.7/6.0
8.7/6.0
8.5/9.2
8.5/9.2
8.5/9.2
8.5/9.2
In-Line—Maximum amps
6.0/7.9
6.0/7.9
6.0/7.9
10.3
10.3
10.7
10.7
Exterior ventilator kits
Exterior duct size
”
36 cm)
.4
(91
Number of lights
Interior ventilator kits
cm
66”
Duct cover width
Heat lamps
30
(76”mi
.2 n.
c
3 6 t o m)
(91”ma
.4 x.
10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm)
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
14
15
)
Interior Ventilator Dimensions
(VCWH Chimney Wall Hoods)
Exterior Ventilator Dimensions
(VCWH Chimney Wall Hoods)
Top View
Top View
12”
(30.5 cm)
A
30”W.
36”W.
42”W.
A
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
30”W.
36”W.
42”W.
B
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
120V
power
supply
1-1/2”
(3.8 cm)
12”
(30.5 cm)
A
8”
(20.3 cm)
1-1/2”
(3.8 cm)
7” (17.8 cm) dia.
duct location
30”W.
36”W.
42”W.
A
14-15/16” (37.9 cm)
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
30”W.
36”W.
42”W.
B
29-7/8” (75.9 cm)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
1-1/2”
(3.8 cm)
120V
power
supply
8”
(20.3 cm)
1-1/2”
(3.8 cm)
10” (25.4 cm) dia.
duct location
B
B
300 or 600 CFM Interior Ventilator Installation
for 30”, 36”, & 42” models
900 or 1200 CFM Exterior or In-Line Ventilator Installation
for 30”, 36”, & 42” models
Top View
Top View
C
1-1/2”
(3.8 cm)
120 V
power
supply
C
A
23-15/16” (60.8 cm)
26-15/16” (68.4 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
48”W.
54”W.
60”W.
66”W.
B
47-7/8” (121.6 cm)
53-7/8” (136.8 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
120 V
power
supply
A
A
48”W.
54”W.
60”W.
66”W.
1-1/2”
(3.8 cm)
6”
(15.2 cm)
1-1/2”
(3.8 cm)
48”W.
54”W.
60”W.
66”W.
10” (25.4 cm) dia.
duct location
C
18” (45.7 cm)
18” (45.7 cm)
24” (61.0 cm)
24” (61.0 cm)
48”W.
54”W.
60”W.
66”W.
A
23-15/16” (60.8 cm)
26-15/16” (68.4 cm)
29-15/16” (76.0 cm)
32-15/16” (83.7 cm)
48”W.
54”W.
60”W.
66”W.
B
47-7/8” (121.6 cm)
53-7/8” (136.8 cm)
59-7/8” (152.1 cm)
65-7/8” (167.3 cm)
6”
(15.2 cm)
1-1/2”
(3.8 cm)
48”W.
54”W.
60”W.
66”W.
C
18” (45.7 cm)
18” (45.7 cm)
24” (61.0 cm)
24” (61.0 cm)
10” (25.4 cm) dia.
duct location
B
B
1200 CFM Interior Ventilator Installation
for 48”, 54”, 60”, & 66” models
900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation
for 48”, 54”, 60”, & 66” models
16
17
Dimensions & Specifications
Clearance Dimensions
(VIH Island Hoods 36”, 42”, 54”, & 66”)
(VIH Island Hoods)
1
(30 2”
.5
cm
)
(15 6”
.2
cm
)
1
(45 8”
.7
cm
)
36”W.
42”W.
54”W.
66”W.
A (Hood width)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
”
30 cm)
A
.2
(76
66
(16 ”m
7.6 in.
c
72 t o m)
”
(18 ma
2.9 x.
cm
)
NOTE: Optional duct cover sold separately.
VIH Island Hoods
Description
Duct cover width
cm
36”
42”
54”
66”
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm)
Number of lights
4
4
6
8
Number of filters
4
4
6
8
Interior ventilator kits
VINV600/1200*
VINV600/1200*
VINV1200*
VINV1200*
Exterior ventilator kits
DEV900/1200*
DEV900/1200*/1500**
DEV1200*/1500**
DEV1200*/1500**
DIL900/1200
DIL900/1200
DIL1200
DIL1200
7” (17.8 cm)/
10” (25.4 cm)
7” (17.8 cm)/
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
Interior—Maximum amps
4.6/7.7
4.6/7.7
8.5
9.3
Exterior—Maximum amps
7.4/4.7
7.4/4.7/5.5
5.5/6.2
6.3/7.1
In-Line—Maximum amps
4.7/6.5
4.7/6.5
7.3
8.1
Interior duct size
)
”
3 6 cm )
.4
(91
N/A
Heat lamps
In-line ventilator kits
30
(76”mi
.2 n.
c
36 to m)
”
(91 ma
.4 x.
10” (25.4 cm)
Exterior duct size
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
18
19
Interior Ventilator Dimensions
(VIH Island Hoods)
Exterior Ventilator Dimensions
(VIH Island Hoods)
Top View
Top View
A
36”W.
42“W.
54”W.
66”W.
36”W.
42“W.
54”W.
66”W.
A
17-15/16” (45.6 cm)
20-15/16” (18.2 cm)
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
18-3/4” (47.6 cm)
9-3/8”
(23.8 cm)
4-5/8”
(11.7 cm)
120
V
A
5/8”
(1.6 cm)
A
17-15/16” (45.6 cm)
20-15/16” (18.2 cm)
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
36”W.
42“W.
54”W.
66”W.
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
9-1/8”
(23.2 cm)
9-5/8”
(24.4 cm)
7” (17.8 cm) dia.
duct location
36”W.
42“W.
54”W.
66”W.
1-1/16”
(2.7 cm)
8-1/4”
(20.9 cm)
6-7/16”
(16.4 cm)
5-15/16”
(15.1 cm)
9-3/4”
(24.8 cm)
120
V
3” (7.62 cm)
2-1/2”
(6.35 cm)
10”
(25.4 cm) dia.
duct location
B
B
600 CFM Interior Ventilator Installation
for all Island Hoods
900 or 1200 CFM Exterior or In-Line Ventilator Installation
for all Island Hoods
Top View
Top View
A
36”W.
42“W.
54”W.
66”W.
36”W.
42“W.
54”W.
66”W.
A
17-15/16” (45.6 cm)
20-15/16” (18.2 cm)
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
18-1/8”
(50.0 cm)
9-3/8”
(23.8 cm)
5-1/2”
(14 cm)
120
V
10”
(25.4 cm) dia.
duct location
A
36”W.
42“W.
54”W.
66”W.
A
17-15/16” (45.6 cm)
20-15/16” (18.2 cm)
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
36”W.
42“W.
54”W.
66”W.
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
8-3/8”
(21.3 cm)
9-1/4”
9-1/2”
(23.5 cm) (24.1 cm)
18-3/4” (47.6 cm)
B
8-3/16”
(20.7 cm)
6-5/8”
(6.35 cm)
5-15/16”
(15.1 cm)
120
V
9-3/4”
(24.8 cm)
3” (7.62 cm)
2-1/2”
(6.35 cm)
10”
(25.4 cm) dia.
duct location
B
1200 CFM Interior Ventilator Installation
for all Island Hoods
900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation
for all Island Hoods
20
21
Dimensions & Specifications
Clearance Dimensions
(VCIH Chimney Island Hoods 36”, 42”, 54”, & 66”)
(VCIH Chimney Island Hoods)
A
36”W.
42”W.
54”W.
66”W.
A (Duct width)
12” (30.5 cm)
12” (30.5 cm)
18” (45.7 cm)
24” (70.0 cm)
36”W.
42”W.
54”W.
66”W.
B (Duct height)
12” (30.5 cm)
or
24” (61.0 cm)
or
36” (91.4 cm)
36”W.
42”W.
54”W.
66”W.
C (Hood width)
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
(15 6“
.2
cm
)
B
1
(45 8”
.7
cm
)
”
30 cm)
C
66
.2
(76
(16 ”m
7.6 in.
c
72 t o m)
”
(18 ma
2.9 x.
cm
)
NOTE: Optional duct cover sold separately.
VCIH Chimney Island Hoods
Description
Duct cover width
m)
36”
42”
54”
66”
12” (30.5 cm)
12” (30.5 cm)
18” (45.7 cm)
24” (70.0 cm)
Duct cover depth
12” (30.5 cm)
Duct cover height
12” (30.5 cm) or 24” (61.0 cm) or 36” (91.4 cm)
30
(76”mi
.2 n.
c
36 to m)
”
(91 ma
.4 x.
c
Number of lights
4
4
6
8
Number of filters
4
4
6
8
Interior ventilator kits
VINV600
VINV600
VINV1200*
VINV1200*
Exterior ventilator kits
DEV900/1200*
DEV900/1200*/1500**
DEV1200*/1500**
DEV1200*/1500**
In-line ventilator kits
DIL900/1200
DIL900/1200
DIL1200
DIL1200
Interior duct size
7” (17.8 cm)
7” (17.8 cm)
10” (25.4 cm)
10” (25.4 cm)
Interior—Maximum amps
4.6
4.6
8.9
9.3
Exterior—Maximum amps
7.4/4.7
7.4/4.7/5.5
5.6/6.4
6.4/7.4
In-Line—Maximum amps
4.7/6.5
3.9/5.7
7.4
7.4
”
3 6 cm )
.4
(91
N/A
Heat lamps
10” (25.4 cm)
Exterior duct size
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
22
23
Interior Ventilator Dimensions
(VCIH Chimney Island Hoods)
Exterior Ventilator Dimensions
(VCIH Chimney Island Hoods)
Top View
Top View
12”
(30.5 cm)
36”W.
42”W.
A
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
36”W.
42”W.
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
1-1/8”
(2.9 cm)
12”
(30.5 cm)
120 V
power
supply
A
36”W.
42”W.
A
17-15/16” (45.6 cm)
20-15/16” (53.2 cm)
36”W.
42”W.
B
35-7/8” (91.1 cm)
41-7/8” (106.4 cm)
1-1/8”
(2.9 cm)
6”
(15.2 cm)
1-1/8”
(2.9 cm)
120 V
power
supply
A
1-1/8”
(2.9 cm)
6”
(15.2 cm)
7” (17.8 cm) dia.
duct location
10” (25.4 cm) dia.
duct location
B
B
600 CFM Interior Ventilator Installation
for all Chimney Island Hoods
900 or 1200 CFM Exterior or In-Line Ventilator Installation
for all Chimney Island Hoods
Top View
Top View
C
54”W.
66”W.
A
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
54”W.
66”W.
B
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
54”W.
66”W.
C
18” (45.7 cm)
24” (61.0 cm)
1-1/8”
(2.9 cm)
A
1-1/8”
(2.9 cm)
6”
(15.2 cm)
C
120 V
power
supply
10” (25.4 cm) dia.
duct location
B
54”W.
66”W.
A
26-15/16” (68.4 cm)
32-15/16” (83.7 cm)
54”W.
66”W.
B
53-7/8” (136.8 cm)
65-7/8” (167.3 cm)
54”W.
66”W.
C
18” (45.7 cm)
24” (61.0 cm)
1-1/8”
(2.9 cm)
A
120 V
power
supply
1-1/8”
(2.9 cm)
6”
(15.2 cm)
10” (25.4 cm) dia.
duct location
B
1200 CFM Interior Ventilator Installation
for all Chimney Island Hoods
900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation
for all Chimney Island Hoods
24
25
Installing Hood Canopy
Dimensions & Specifications
(VBCV Wall Custom Ventilator System 30”, 36”, 42”, 48”, 54”, 60” & 66”)
(Custom Hood Canopy Cutouts)
A*
*For best results,
center the unit over
the burners of the
cooking product
(front to back; right
to left).
Make sure the back wall
of the custom hood
canopy is flush with the
cutout so the ventilator
system may be mounted
as shown on page 25.
B*
Custom Hood
Canopy
A
B
Bottom Cutout Dimensions
Wall Hoods
Description
30”
36”
42”
48”
54”
60”
66”
A (Hood Width)
W.
W.
W.
W.
W.
W.
W.
B (Hood Depth)
27-7/16” (69.7 cm)
33-7/16” (84.9 cm)
39-7/16” (100.2 cm)
45-7/16” (115.4 cm)
51-7/16” (130.7 cm)
57-7/16” (145.9 cm)
63-7/16” (161.1 cm)
21-7/16”
21-7/16”
21-7/16”
21-7/16”
21-7/16”
21-7/16”
21-7/16”
(54.5
(54.5
(54.5
(54.5
(54.5
(54.5
(54.5
cm)
cm)
cm)
cm)
cm)
cm)
cm)
1) Position ventilator
system inside of the
custom hood canopy
and center it front to
back and left to right.
VBCV Wall Custom Ventilator System
Description
30”
36”
42”
48”
54”
60”
66”
Number of lights
2
2
2
3
3
4
4
Number of filters
2
2
2
3
3
4
4
1
2
2
2
2
Heat lamps
Interior ventilator kits
Exterior ventilator kits
In-line ventilator kits
Interior duct size
1
1
VINV300/
600/1200*
DEV900/
1200*
DIL900/1200
VINV300/
600/1200*
DEV900/
1200*
DIL900/1200
VINV600/ VINV1200* VINV1200* VINV1200* VINV1200*
1200*
DEV900/
DEV1200*/ DEV1200*/ DEV1200*/ DEV1200*/
1200*
1500**
1500**
1500**
1500**
DIL900/1200
DIL1200
DIL1200
DIL1200
DIL1200
7”/10”
7”/10”
7”/10”
10”
(17.8/25.4 cm) (17.8/25.4 cm) (17.8/25.4 cm) (25.4 cm)
Exterior duct size
10”
(25.4 cm)
10”
(25.4 cm)
Built-In Ventilator
System
2) Bottom mounting holes
fasten ventilator system
to bottom of custom
hood canopy with the
screws provided.
3) OPTIONAL
Rear mounting holes fasten
ventilator system to rear of
custom hood canopy.
10”
(25.4 cm)
10” (25.4 cm)
Interior—Maximum amps
5.9/9.0
5.9/9.0
5.9/9.0
11.5
11.5
11.9
11.9
Exterior—Maximum amps
8.7/6.0
8.7/6.0
8.7/6.0
8.5/9.2
8.5/9.2
8.9/9.2
8.9/9.2
In-Line—Maximum amps
6.0/7.9
6.0/7.9
6.0/7.9
10.3
10.3
10.7
10.7
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
26
27
Built-In Wall Custom Ventilator
System Dimensions (VBCV Models)
Clearance Dimensions
(VBCV Wall Custom Ventilator System)
(Cu
sto
m
1-1/2”
(3.8 cm)
1”
(2.54 cm)
1-1/2”
(3.81 cm)
7/8”
(2.2 cm)
11-1/2”
(29.2 cm)
Ho
od
)
17-1/4”
(43.8 cm)
6”
(15.2 cm)
5/8”
(1.6 cm)
66
5/8”
(1.6 cm)
21-7/8”
(55.8 cm)
21-7/8”
(55.8 cm)
(16 ”m
7.6 in.
c
7 2 t o m)
”
(18 ma
2.9 x.
cm
)
30
(76”mi
.2 n.
c
3 6 t o m)
”
(91 ma
.4 x.
cm
”
36 cm)
D
)
8-1/4”
(20.9 cm)
9-3/8”
(23.8 cm)
120
V
10”
(25.4 cm) dia.
duct location
5/8” (1.6 cm)
4-5/8”
(11.7 cm)
6”
(15.2 cm)
5-1/2”
(14.0 cm)
.4
(91
For 300, 600 or 1200 CFM Interior
Ventilator Installation
For 900, 1200 or 1500 CFM Exterior
or In-Line Ventilator Installation
9-1/4”
(23.5 cm)
7”
(17.8 cm)
dia. duct
location
3” (7.6 cm)
120
V
9-5/8”
(24.4 cm)
18-3/4” (47.6 cm)
2-1/2” (6.4 cm)
5/8” (1.6 cm)
C
C
900 or 1200 CFM Exterior
or In-Line Ventilator Installation
30”, 36”, 42” W. Models
300 or 600 CFM Interior
Ventilator Installation
30”, 36”, 42” W. Models
*Note: “Dotted Line” (........) represents cutout.
D
C
30” W.
36” W.
42” W.
28
D
30” W.
36” W.
42” W.
28-1/4” (71.8 cm)
34-1/4” (87.0 cm)
40-1/4” (102.2 cm)
29
14-1/8” (35.9 cm)
17-1/8” (43.5 cm)
20-1/8” (51.1 cm)
Built-In Wall Custom Ventilator
System Dimensions (VBCV Models)
Dimensions & Specifications
(VICV Island Custom Ventilator System 36”, 42”, 54” & 66”)
A*
D
8-1/4”
(20.9 cm)
6”
(15.2 cm)
5-1/2”
(14.0 cm)
120
V
10”
(25.4 cm) dia.
duct location
5/8” (1.6 cm)
*For best results,
center the unit over
the burners of the
cooking product
(front to back; right
to left).
3” (7.6 cm)
2-1/2” (6.4 cm)
Make sure the back wall
of the custom hood
canopy is flush with the
cutout so the ventilator
system may be mounted
as shown on page 30.
B*
C
Bottom Cutout Dimensions
1200 or 1500 CFM Exterior or In-Line Ventilator Installation
48”, 54”, 60”, 66” W. Models
Island Hoods
Description
18-1/2”
(50.0 cm)
9-3/8”
(23.8 cm)
D
5-1/2”
(14.0 cm)
10”
(25.4 cm)
dia. duct
location
8-3/8”
(21.3 cm)
120
V
9-1/4”
(23.5 cm)
5/8” (1.6 cm)
36”
42”
54”
66”
W.
W.
W.
W.
A (Hood Width)
Description
C
*Note: “Dotted Line” (........) represents cutout.
C
D
30”
36”
42”
48”
54”
60”
66”
30
cm)
cm)
cm)
cm)
36”
42”
54”
66”
4
4
6
8
Number of filters
4
4
6
8
Interior ventilator kits
VINV600/1200*
VINV600/1200*
VINV1200*
VINV1200*
Exterior ventilator kits
DEV900/1200*
DEV900/1200*/1500**
DEV1200*/1500**
DEV1200*/1500**
N/A
Heat lamps
Interior duct size
DIL900/1200
DIL900/1200
DIL1200
DIL1200
7” (17.8 cm)/
10” (25.4 cm)
7” (17.8 cm)/
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
10” (25.4 cm)
Exterior duct size
28-1/4” (71.8 cm)
34-1/4” (87.0 cm)
40-1/4” (102.2 cm)
46-1/4” (117.5 cm)
52-1/4” (132.7 cm)
58-1/4” (148.0 cm)
64-1/4” (163.2 cm)
(70.0
(70.0
(70.0
(70.0
Number of lights
In-line ventilator kits
W.
W.
W.
W.
W.
W.
W.
27-9/16”
27-9/16”
27-9/16”
27-9/16”
VICV Island Custom Ventilator System
9-1/2”
(24.4 cm)
1200 CFM Interior Ventilator Installation
30”, 36”, 42”, 48”, 54”, 60”, 66” W. Models
30”
36”
42”
48”
54”
60”
66”
B (Hood Depth)
33-7/16” (84.9 cm)
39-7/16” (100.2 cm)
51-7/16” (130.7 cm)
63-7/16” (161.1 cm)
W.
W.
W.
W.
W.
W.
W.
14-1/8” (35.9 cm)
17-1/8” (43.5 cm)
20-1/8” (51.1 cm)
23-1/8” (58.7 cm)
26-1/8” (66.4 cm)
29-1/8” (74.0 cm)
32-1/8” (81.6 cm)
Interior—Maximum amps
4.6/7.7
4.6/7.7
8.5
9.3
Exterior—Maximum amps
7.4/4.8
7.4/4.8/5.5
5.6/6.2
5.6/6.2
In-Line—Maximum amps
4.7/6.5
4.7/6.5
7.3
8.1
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.
31
Installing Hood Canopy
Clearance Dimensions
(Custom Hood Canopy Cutouts)
(VICV Island Custom Ventilator System)
Custom Hood
Canopy
A
(Cu
sto
m
B
Ho
od
)
66
(16 ”m
7.6 in.
c
7 2 t o m)
”
(18 ma
2.9 x.
cm
)
1) Position ventilator
system inside of the
custom hood canopy
and center it front to
back and left to right.
30
(76”mi
.2 n.
c
3 6 to m)
”
(91 ma
.4 x.
cm
Built-In Ventilator
System
”
36 cm)
.4
(91
2) Bottom mounting holes
fasten ventilator system
to bottom of custom
hood canopy with the
screws provided.
3) OPTIONAL
Rear mounting holes fasten
ventilator system to rear of
custom hood canopy.
32
33
)
Built-In Island Custom Ventilator
System Dimensions (VICV Models)
Built-In Island Custom Ventilator
System Dimensions (VICV Models)
1-1/2”
(3.8 cm)
1-1/2”
(3.8 cm)
1”
(2.5 cm)
11/16”
(1.7 cm)
A
B
11-1/2”
(29.2 cm)
11-1/2”
(29.2 cm)
5-3/4”
(14.6 cm)
5-1/2”
(14.0 cm)
10”
(25.4 cm) dia.
duct location
27-7/16” (69.7 cm)
(including screw heads)
120
V
9-1/4”
(23.5 cm)
2-1/2”
(6.4 cm)
9-1/2”
(24.4 cm)
18-3/4” (47.6 cm)
28-7/16” (72.2 cm)
28-7/16” (72.2 cm)
5/8” (1.6 cm)
5/8” (1.6 cm)
A
A
900, 1200 or 1500 External or In-Line Power
42”, 54”, 66” W. Models
1200 CFM Internal Power
42”, 54”, 66” W. Models
Internal Power
External Power
B
B
18-3/4”
(47.6 cm)
9-3/8”
(23.8 cm)
8-1/4”
(21.0 cm)
5-3/4”
(14.6 cm)
*Note: “Dotted Line” (........) represents cutout.
B
A
6” (15.2 cm)
120
V
1-3/16”
(3.0 cm)
3” (7.6 cm)
9-1/4”
(23.5 cm)
7”
(17.8 cm) dia.
duct location
2-1/2”
(6.4 cm)
54” W.
66” W.
54” W.
66” W.
52-1/4” (132.7 cm)
64-1/4” (163.2 cm)
120
V
5-3/16”
(13.2 cm)
9-5/8”
(24.4 cm)
5/8” (1.6 cm)
5/8” (1.6 cm)
A
A
900 or 1200 CFM External or In-Line Power
36”, 42” W. Models
600 CFM Internal Power
36”, 42” W. Models
*Note: “Dotted Line” (........) represents cutout.
B
A
36” W.
42” W.
8-3/8”
(21.3 cm)
10”
(25.4 cm)
dia. duct
location
3” (7.6 cm)
5/8”
(1.6 cm)
27-7/16” (69.7 cm)
(including screw heads)
10”
(25.4 cm) dia.
duct location
6” (15.2 cm)
120
V
6”
(15.2 cm)
7/8”
(2.2 cm)
8-1/4”
(21.0 cm)
17-1/4”
(43.8 cm)
5/8”
(1.6 cm)
18-3/4” (47.6 cm)
36” W.
42” W.
34-1/4” (87.0 cm)
40-1/4” (102.2 cm)
34
17-1/8” (43.5 cm)
20-1/8” (51.1 cm)
35
26-1/8” (66.4 cm)
32-1/8” (81.6 cm)
Installation (VWH 10”H. Wall Hoods w/Standard Ventilator)
Planning Information
Proper installation of ducting is extremely
important to ensure maximum performance
from any ventilation product.
• All CFMs are based on tests at 0.1 static
pressure: without applying static pressure, CFM
would be greatly overstated.
• Straight runs and gradual turns are best; for
example, each 90º elbow is equivalent to 5-10
feet (1.52-3.05 cm) of straight run.
• Never use flexible duct; it creates back pressure/air
turbulence and greatly reduces performance.
• Proper performance is dependent on proper
ducting; make sure that a qualified and trained
installer is used.
• Check with a qualified and trained installer or
local codes for makeup air requirement, if any.
• Max. amp rating for hoods includes
recommended ventilator kit rating; all products
must be hard wired direct with 2-wire with ground.
2
1
Roof cap
7” round duct
300 or 600 CFM
single blower
interior-power
typical ductwork
4
5/16”
nut
driver
Duct cover or soffit
Hood
Check damper for unrestricted movement, adjust if
necessary.
Roof cap
10” round duct
Attach transition to damper. Seal with aluminum tape.
1200 CFM
single blower
interior power
typical ductwork
WARNING
3
Duct cover or soffit
Plan where the duct work will be located. Install
proper-sized duct work, and roof or wall cap for the
type of blower you are using. Recommended hood
locations for the most common installations are
shown. Adjust your measurements for various heights
of ceilings, soffits, cabinets, or ranges/rangetops.
To reduce the risk of fire, electric shock, or injury
to persons, observe the following:
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
Hood
Exterior blower
10” round duct
900, 1200, or
1500 CFM
exterior power
typical ductwork
Check Framing
Duct cover or soffit
Flip hood over and remove electrical box cover.
Hood
Wall cap
Wall Installation
exterior power
typical ductwork
5
4
1
2
Duct
Duct cover or soffit
1
Hood
NOTE: Because of the weight of the hood make sure
that the mounting screws are driven into the framing
and not just the drywall. It may be necessary to drill
additional holes in the canopy for proper alignment.
NOTE: Wall exhaust must be a minimum of 24” (61.0 cm)
from ground. This may vary depending on local codes
and geographic location.
Electrical Supply
Run 120 VAC electrical wiring from service panel
to installation location. See Specifications pages
for the maximum amp requirements.
36
Insert 6” of electrical wiring through the top of vent hood
and secure using wiring restrain. Refer to local codes.
Slide duct over transition and tape around joint.
37
11
6
1
5/16”
nut driver
CAUTION: If not using a duct cover, using screws
provided, make sure top mounting screws are secured
into soffit or cabinet framing. Use additional mounting
screws, if necessary.
CAUTION: Secure vent hood to wall using screws
provided. Use additional mounting screws and wall
anchors, if necessary.
7
8
BARE OR GREEN
3
5/16”
nut driver
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Duct Cover Option
(VWH 10”H. Wall Hoods w/Standard Ventilator)
1
2
2
1
1
2
GREEN
BLACK
WHITE
BLACK
WHITE
Connect black to black, white to white, and the
green/bare wire under the green screw.
NOTE: Housing wiring must be properly installed for
wiring to be correct when wiring unit.
Installation
10
9
1
2
Measure distance from ceiling to canopy.
Replace electrical box cover. Make connection to
breaker box.
Slide the duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
(VWH 10”H. Wall Hoods w/Recirculating Kit)
1
2
1
3
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
3
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip.
38
Remove damper and discard with transition.
Turn recirculating unit upside down. Place vent hood
upside down on recirculating unit.
39
3
8
4
9
BARE OR GREEN
1
1
2
GREEN
BLACK
WHITE
BLACK
WHITE
Attach with screws and lock washers provided.
Connect black to black, white to white, and the
green/bare wire under the green screw.
NOTE: Housing wiring must be properly installed for
wiring to be correct when wiring unit.
Attach with screws.
WARNING
5
Replace electrical box cover. Make connection to
breaker box.
10
11
1
To reduce the risk of fire, electric shock, or injury
to persons, observe the following:
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
Remove electrical box cover.
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Assemble brackets to baffles and insert charcoal filters.
6
13
12
7
3
1
1
1
5/16”
nut driver
2
2
Flip hood over. Insert 6” of electrical wiring through the
top of vent hood and secure. Refer to local codes.
CAUTION: Secure vent hood. Make sure mounting
screws are secured into framing. Use additional
mounting screws and wall anchors, if necessary.
40
3
3
2
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip.
41
Installation (VWH 18”H. Wall & VCWH Chimney Wall Hoods)
1
1-1/2”x 3/4”
(3.8 cm) x (1.9 cm)
wood strip
2
1(413/1
.6 6
cm ”
)
5/16”
nut driver
6
5
Slot for
wood strip
1
1
5/16”
nut driver
2
Measure down 1-13/16 (4.6 cm) from desired height of
hood and secure 1-1/2” x 3/4” wood strip (provided
locally) to wall using screws provided.
Use additional mounting screws to secure hood to
wood strip.
3
3
2
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip.
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Duct Cover Option (VWH 18”H. Wall Hoods)
3
5/16”
nut driver
2
1
2
5/16”
nut driver
CAUTION: Secure vent hood to wall using screws
provided. Use additional mounting screws and wall
anchors, if necessary.
CAUTION: If not using a duct cover, using screws
provided, make sure top mounting screws are secured
into soffit or cabinet framing use additional mounting
screws, if necessary.
4
Measure distance from ceiling to canopy.
Slide the duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
1
To install ventillation kit
refer to ventillation kit
installation instructions.
2
3
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
42
43
Installation (VIH/VCIH Island Hoods)
Duct Cover Option (VCWH Chimney Wall Hoods)
1
2
Measure distance from ceiling to canopy.
2
1
Tape to avoid scratching.
3
Check framing where cutout will be.
NOTE: 200 lb. limit.
Cut appropriate size hole in ceiling. Either 7” or 10”
depending on your specific unit and ventillator kit.
4
A1
Mounting options:
Using duct cover with ceiling mounting
bracket. (Option A - VCIH only)
Using threaded rod for additional support.
(Option B)
2
Place duct cover top inside duct cover base and lower until
desired height is found. Mark height. Use the retaining
nuts and bolts to fasten in place and remove tape.
Attaching hood directly to soffit or
duct cover.
(Skip to step 3)
Slide the duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
Attach duct cover to optional ceiling mounting bracket.
A2
B1
5/16”
nut
driver
Attach duct cover to ceiling. The ceiling bracket can be
hidden by using a locally supplied trim.
44
Additional support option. Drill holes in all four corners
for threaded rod and run rods from hood to ceiling.
45
4
3
5/16”
nut
driver
Service & Registration
Service & Parts
Only authorized replacement parts may be
used in performing service on the appliance.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be
referred to a qualified technician.
Run duct work down to bottom edge of duct
cover/soffit and secure in place. Make sure the duct
does not stick down past the cover.
Attach canopy to duct cover/soffit. Seal top of hood to
duct with aluminum tape.
5
Record the following information indicated
below. You will need it if service is ever required.
The serial number and model number for your
appliance are located on the identification plate
mounted on the inside of the hood canopy.
1
Model number
To install ventillation kit
refer to ventillation kit
installation instructions.
_________________________________________
Serial number
_________________________________________
2
3
Date of purchase
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
6
_________________________________________
Date installed
7
_________________________________________
1
1
Dealer's name
_________________________________________
3
3
Address
2
2
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip. NOTE: Number of spacers
and baffles may vary by model.
_________________________________________
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
46
47