Download Viking VCWH3648SS Installation guide
Transcript
Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com UL F20470G EN C UL (033111) Professional Hoods Table of Contents IMPORTANT–Please Read and Follow! Warnings & Important Information________________________________________________________ 3-4 VWH 10”H. Wall Hoods w/Standard Ventilator 24”, 30”, & 36” Dimensions & Specifications _____________________________________________________ 5 Clearance Dimensions ___________________________________________________________ 6 Interior Ventilator Dimensions ____________________________________________________ 7 VWH 18”H. 24”/27” Deep Wall Hoods 24”, 30”, 36”, 42”, 48”, 54”, 60”, & 66” Dimensions & Specifications ______________________________________________________ 8 Clearance Dimensions _____________________________________________________________ 9 Interior Ventilator Dimensions _____________________________________________________ 10 Exterior Ventilator Dimensions ___________________________________________________ 11 VWH 18”H. T-Series Wall Hoods 36”, 48”, & 60” Dimensions & Specifications _____________________________________________________ 12 Clearance Dimensions __________________________________________________________ 13 VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66” Dimensions & Specifications _____________________________________________________ 14 Clearance Dimensions __________________________________________________________ 15 Interior Ventilator Dimensions ___________________________________________________ 16 Exterior Ventilator Dimensions ___________________________________________________ 17 VIH Island Hoods 36”, 42”, 54”, & 66” Dimensions & Specifications _____________________________________________________ 18 Clearance Dimensions ___________________________________________________________ 19 Interior Ventilator Dimensions ___________________________________________________ 20 Exterior Ventilator Dimensions ___________________________________________________ 21 VCIH Chimney Island Hoods 36”, 42”, 54”, & 66” Dimensions & Specifications _____________________________________________________ 22 Clearance Dimensions ___________________________________________________________ 23 Interior Ventilator Dimensions ___________________________________________________ 24 Exterior Ventilator Dimensions ___________________________________________________ 25 VBCV Wall Custom Ventilator System Dimensions & Specifications _____________________________________________________ 26 Installing Hood Canopy _________________________________________________________ 27 Clearance Dimensions ___________________________________________________________ 28 VBCV Ventilator Dimensions _____________________________________________________ 29 VICV Island Custom Ventilator System Dimensions & Specifications _____________________________________________________ 31 Installing Hood Canopy _________________________________________________________ 32 Clearance Dimensions ___________________________________________________________ 33 VICV Ventilator Dimensions ______________________________________________________ 34 Planning Information________________________________________________________________ 36 Installation Procedures Installation (VWH 10”H. Wall Hoods w/Standard Ventilator) __________________________ 37 Duct Cover Option (VWH 10”H. Wall Hoods w/Standard Ventilator)___________________ 39 Installation (VWH 10”H. Wall Hoods w/Recirculating Kit) _____________________________ 39 Installation (VWH 18”H. Wall & VCWH Chimney Wall Hoods) ________________________ 42 Duct Cover Option (VWH 18”H. Wall Hoods)_______________________________________ 43 Duct Cover Option (VCWH Chimney Wall Hoods) __________________________________ 44 Installation (VIH/VCIH Island Hoods) ______________________________________________ 45 Service & Registration_______________________________________________________________ 47 2 NOTE: If installing hood with warming shelf panel, install warming shelf panel first. WARNING To reduce the risk of fire, electric shock, or injury to persons, observe the following: IMPORTANT – PLEASE READ AND FOLLOW • Before beginning, please read these instructions completely and carefully. • Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. • Please observe all local and national codes and ordinances. If no local codes are applicable, wire in accordance with the National Electrical Code, ANSI/NFPA 70-latest edition. • Damp environment approved models should be installed in a covered non-enclosed area and should be protected from the elements as much as possible. • The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future reference. • Check with a qualified and trained installer or local codes for makeup air requirement, if any. • Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. • Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. 2. Sufficient air is needed for proper combustion and exhausting of gases through the flute (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities. 3. When cutting of drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. 4. Ducted fans must always be vented to the outdoors. 5. WARNING!: To reduce risk of fire, use only metal ductwork 6. CAUTION!: To reduce risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls or ceilings, or into attics, crawl spaces, or garages. 7. CAUTION!: To Reduce the Risk of Fire and Electric Shock, Install this rangehood only with remote blower models manufactured by Viking, model numbers – DEV900/DEV1200, VEV900/VEV1200, OR DEV1500, VEV1500 or integral blowers manufactured by Viking, model numbers – DIV300, DIV440, DIV600, DIV800, DIV1200, VIV300, VIV600, or VIV1200. NOTE – Please refer inside for specific canopy/blower combinations. This hood is for residential installation only and is not designed for installation over a commercial product. Make sure power is off at the main circuit breaker or fuse box before making connections. To avoid risk of fire, electric shock, or injury to persons, turn off the electricity to the hood from the power supply before servicing or cleaning. Viking hoods are equipped with variable speed control blowers. These units will not function with a single speed ventilator. All Viking Range ventilator kits are designed specifically for use with Viking Range hoods. Use of any non-Viking Range ventilator kit will void the hood warranty. Viking hoods are equipped with the variable speed controls for blowers. These units will not function with a single speed ventilator. All Viking ventilator kits are designed specifically for use with Viking hoods. Use of any non-Viking ventilator kit will void the hood warranty. READ AND SAVE THESE INSTRUCTIONS 3 IMPORTANT–Please Read and Follow! Dimensions & Specifications (VWH 10”H. Wall Hoods w/Standard Ventilator 24”, 30”, & 36”) WARNING To reduce the risk of injury to persons in the event of a rangetop grease fire, observe the following. (Based on “Kitchen Firesafety Tips,” published by NFPA.) 1. SMOTHER FLAMES with a close fitted lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. 2. NEVER PICK UP A FLAMING PAN. You may be burned. 3. DO NOT USE WATER, including wet dishcloths or towels a violent steam explosion will result. 4. Use an extinguisher ONLY if • You know it is a Class ABC extinguisher, and you already know how to operate it. • The fire is small and contained in the area where it started. • The fire department is being called. • You can fight the fire with your back to an exit. 1 (30 2 ” .5 cm ) (7. 3” 6 cm ) 1 (25 0 ” .4 cm ) A (Hood width) 24”W. 23-7/8“ (60.6 cm) 30”W. 29-7/8“ (76.2 cm) 36”W. 35-7/8” (91.1 cm) ” 21 cm) A .3 (53 CAUTION For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. NOTE: Optional duct cover sold separately. VWH 10”H. Wall Hoods w/Standard Ventilator WARNING Description Duct cover width TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS Rangehoods must be installed with the ventilators that are specified on their carton indicating suitability with this model. Other ventilators cannot be substituted. 24” 30” 36” 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) Duct cover depth 12” (30.5 cm) Duct cover height 12” (30.5 cm) Number of lights 2 Number of filters 2 N/A Heat lamps Interior ventilator kit 460 CFM Standard 7” (17.8 cm) Interior duct size* 5.6 Interior—Maximum amps * Disregard when using recirculating kits. 460 CFM blower is shipped with hood. 4 5 Interior Ventilator Dimensions Clearance Dimensions (VWH 10”H. Wall Hoods w/Standard Ventilator) (VWH 10”H. Wall Hoods w/Standard Ventilator) Top View 24”W. 30”W. 36”W. 60 24 (61”mi .0 n. c 27 to m) ”m (68 ax .6 .* (15 ”m 2.4 in. c 63 t o m) ” (16 ma 0.0 x. cm ) cm ) ” 3 6 cm ) .4 (91 A 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 24”W. 30”W. 36”W. B 5-1/4” (13.3 cm) 8-1/4” (20.9 cm) 11-1/4” (28.6 cm) 24”W. 30”W. 36”W. C 11-15/16” (30.3 cm) 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 24”W. 30”W. 36”W. D 5/8” (1.6 cm) 3-5/8” (9.2 cm) 6-5/8” (16.8 cm) A 18” (4.6 cm) B D 3-4” (1.9 cm) C 4” (10.2 cm) 3-7/8” (9.8 cm) 7” (17.8 cm) dia. duct location 460 CFM Interior Ventilator Installation * NOTE: When installing with a 24” high-shelf, the 27” (68.6 cm) max. dimensions must be used. 6 7 1/2” (1.3 cm) 3-1/2” (8.9 cm) Electrical hookup Dimensions & Specifications Clearance Dimensions (VWH 18”H. 24” Deep Wall Hoods 24”, 30”, 36”, 42”, 48”, 54”, 60”, & 66”) (VWH 18”H. 27” Deep Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”) (VWH 18”H. Wall Hoods) A (Hood width) 24”W. 23-7/8“ (60.6 cm) 30”W. 29-7/8“ (76.2 cm) 36”W. 35-7/8” (91.1 cm) 42”W. 41-7/8” (106.4 cm) 48“W. 47-7/8” (121.6 cm) 54”W. 53-7/8” (136.8 cm) 60”W. 59-7/8” (152.1 cm) 66”W. 65-7/8” (167.3 cm) 24”D. 27”D. 1 (30 2” .5 cm ) (15 6” .2 cm 1 (45 8” .7 cm ) ) B (Hood depth) 24” (61.0 cm) 27” (68.6 cm) A B 66 (16 ”m 7.6 in. c 7 2 t o m) ” (18 ma 2.9 x. cm ) NOTE: Optional duct cover sold separately. VWH 18”H. Wall Hoods Description Duct cover width 24” 30” 36” 42” 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 48” 54” 60” 66” 47-7/8” 53-7/8” 59-7/8” 65-7/8” (121.6 cm) (136.8 cm) (152.1 cm) (167.3 cm) Duct cover depth 12” (30.5 cm) Duct cover height 12” (30.5 cm) Number of lights 2 2 2 2 3 3 4 4 Number of filters 2 2 2 2 3 3 4 4 Heat lamps 1 1 1 1 2 2 2 2 Interior ventilator kits Exterior ventilator kits In-line ventilator kits Interior duct size VINV300/ VINV300/ 600 600/1200 DEV900/ DEV900/ 1200* 1200* DIL900/1200 DIL900/1200 VINV300/ 600/1200 DEV900/ 1200* DIL900/1200 30 (76”mi .2 n. c 3 6 t o m) (91”ma .4 x. cm ” 36 cm) .4 (91 VINV600/ VINV1200* VINV1200* VINV1200* VINV1200* 1200 DEV900/ DEV1200*/ DEV1200*/ DEV1200*/ DEV1200*/ 1200* 1500** 1500** 1500** 1500** DIL900/1200 DIL1200 DIL1200 DIL1200 DIL1200 7” 7”/10” 7”/10” 7”/10” 10” (17.8 cm) (17.8/25.4 cm) (17.8/25.4 cm) (17.8/25.4 cm) (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) Exterior duct size Interior—Maximum amps 4.9/5.9 4.9/5.9 4.9/5.9 11.5 11.5 11.5 11.5 11.5 Exterior—Maximum amps 8.7/6.0 8.7/6.0 8.7/6.0 8.7/6.0 8.5/9.2 8.5/9.2 8.9/9.2 8.9/9.2 In-Line—Maximum amps 6.0/7.9 6.0/7.9 6.0/7.9 6.0/7.9 10.3 10.3 10.7 10.7 * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft. ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft. NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods. 8 9 ) Interior Ventilator Dimensions (VWH 18”H. Wall Hoods) Exterior Ventilator Dimensions (VWH 18”H. Wall Hoods) Top View Top View A A 18-3/4” (47.6 cm) 1-1/16” 5-15/16” (2.7 cm) (15.1 cm) 5/8” (1.6 cm) 9-3/8” (23.8 cm) 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. A 11-15/16” (30.3 cm) 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 23-15/16” (60.8 cm) 26-15/16” (68.4 cm) 29-15/16” (76.0 cm) 32-15/16” (83.7 cm) 4-5/8” (11.7 cm) 9-1/8” (23.2 cm) 120 V 9-5/8” (24.4 cm) 7”(17.8 cm) dia. duct location 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. B 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm) 53-7/8” (136.8 cm) 59-7/8” (152.1 cm) 65-7/8” (167.3 cm) 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. A 11-15/16” (30.3 cm) 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 23-15/16” (60.8 cm) 26-15/16” (68.4 cm) 29-15/16” (76.0 cm) 32-15/16” (83.7 cm) 6-7/16” (16.4 cm) 9-3/4” (24.8 cm) 3” (7.62 cm) 10” (25.4 cm) dia. duct location 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. B 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm) 53-7/8” (136.8 cm) 59-7/8” (152.1 cm) 65-7/8” (167.3 cm) B 300 or 600 CFM Interior Ventilator Installation for all Wall Hoods 900 or 1200 CFM Exterior Ventilator Installation for all Wall Hoods Top View Top View A 18-1/2” (50.0 cm) A 5-15/16” (15.1 cm) 5/8” 9-3/8” (23.8 cm) (1.6 cm) A 11-15/16” (30.3 cm) 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 23-15/16” (60.8 cm) 26-15/16” (68.4 cm) 29-15/16” (76.0 cm) 32-15/16” (83.7 cm) 120 V 2-1/2” (6.35 cm) B 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. 8-1/4” (20.9 cm) 5-1/2” (14.0 cm) 120 V 9-1/4” 9-1/2” (23.5 cm) (24.1 cm) 10” (25.4 cm) dia. duct location 8-3/8” (21.3 cm) 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. B 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm) 53-7/8” (136.8 cm) 59-7/8” (152.1 cm) 65-7/8” (167.3 cm) B 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. A 11-15/16” (30.3 cm) 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 23-15/16” (60.8 cm) 26-15/16” (68.4 cm) 29-15/16” (76.0 cm) 32-15/16” (83.7 cm) 8-3/16” (20.7 cm) 6-5/8” (16.8 cm) 9-3/4” (24.8 cm) 120 V 3” (7.62 cm) 2-1/2” (6.35 cm) 10” (25.4 cm) dia. duct location B 24”W. 30”W. 36”W. 42”W. 48”W. 54”W. 60”W. 66”W. B 23-7/8” (60.6 cm) 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm) 53-7/8” (136.8 cm) 59-7/8” (152.1 cm) 65-7/8” (167.3 cm) 1200 CFM Interior Ventilator Installation for all Wall Hoods 1200 or 1500 CFM Exterior Ventilator Installation for all Wall Hoods 10 11 Dimensions & Specifications Clearance Dimensions (VWH 18”H. T-Series Wall Hoods 36”, 48”, & 60”) (VWH 18”H. T-Series Wall Hoods) Seal joints with silicone. Provided on “T” Series only. ” 18 ) cm .7 5 (4 1 (30 2” . 5c m) ” “X M /2” I D 4-1 m) + 1.4 c (1 (15 6” .2 cm ) 1 (45 8” .7 cm ) ” 27 cm) .6 8 (6 66 A (Hood width) 36”W. 35-7/8” (91.1 cm) 48“W. 47-7/8” (121.6 cm) 60”W. 59-7/8” (152.1 cm) (1 6 ” m 7.6 in. c 72 to m) (18” m 2.9 ax. cm ) ” 27 m) A .6 (68 c 30 (76 ”mi . 2 n. c 36 t o m) ”m (91 a .4 x. cm ) NOTE: Optional duct cover sold separately. ” 36 cm) VWH 18”H. T-Series Wall Hoods Description Duct cover width 36” 48” 60” 35-7/8” (91.1 cm) 47-7/8” (121.6 cm) 59-7/8” (152.1 cm) 12” (30.5 cm) Duct cover depth 12” (30.5 cm) Duct cover height Number of lights 2 3 4 2 3 4 Interior ventilator kits VINV1200* VINV1200* VINV1200* Exterior ventilator kits DEV1200*/1500** DEV1200*/1500** DEV1200*/1500** DIL1200 DIL1200 Number of filters In-line ventilator kits .4 (91 DIL1200 Interior duct size 10” (25.4 cm) Exterior duct size 10” (25.4 cm) Interior—Maximum amps 9.0 11.4 11.8 Exterior—Maximum amps 6.1/6.8 8.4/9.1 8.8/9.5 In-Line—Maximum amps 7.9 10.2 10.6 * A 1,200 CFM interior- or exterior-power ventilator should be used with all T-Series models and when indoor models are installed over range/rangetop with gas char-grill. Max duct run is 50 ft. ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft. NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods. 12 Note: T-Series Models must be installed in a covered, non-enclosed area, and should be protected from the elements as much as possible. The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hood should be installed 4-1/2” (11.4 cm) plus the distance between the back trim and surface from the back wall. (Note: There is a 3” minimum clearance from the back trim to non-combustible surfaces, and a 24” minimum to combustible surfaces.) This will require building the hood out from the wall. Any combustible material used for this purpose must be covered with locally-supplied stainless steel. Viking also recommends using a backsplash. 13 Dimensions & Specifications Clearance Dimensions (VCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, 54”, 60”, & 66”) (VCWH Chimney Wall Hoods) A A (Duct width) 30”W. 12“ (30.5 cm) 36”W. 12“ (30.5 cm) 42”W. 12“ (30.5 cm) 48“W. 18“ (45.7 cm) 54”W. 18“ (45.7 cm) 60”W. 24“ (61.0 cm) 66”W. 24“ (61.0 cm) 1 B (Hood width) 30”W. 29-7/8“ (76.2 cm) 36”W. 35-7/8” (91.1 cm) 42”W. 41-7/8” (106.4 cm) 48“W. 47-7/8” (121.6 cm) 54”W. 53-7/8” (136.8 cm) 60”W. 59-7/8” (152.1 cm) 66”W. 65-7/8” (167.3 cm) (15 6” .2 c (30 2” .5 c to m) 2 (61 4” .0 cm ) m) 1 (45 8” .7 cm ) ” 24 cm) B 66 .0 (61 (16 ”m 7.6 in. c 7 2 t o m) (18 ”ma 2.9 x. cm ) NOTE: Optional duct cover sold separately. VCWH Chimney Wall Hoods Description 30” 36” 42” 48” 54” 60” 12” (30.5 cm) 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 18” (45.7 cm) 24” (61.0 cm) 24” (61.0 cm) Duct cover depth 12” (30.5 cm) Duct cover height 12” (30.5 cm) to 24” (61.0 cm) 2 2 2 3 3 4 4 Number of filters 2 2 2 2 3 3 3 1 VINV600 2 VINV1200* 2 VINV1200* 2 VINV1200* 2 VINV1200* DEV1200*/ 1500** DIL1200 DEV1200*/ 1500** DIL1200 DEV1200*/ 1500** DIL1200 DEV1200*/ 1500** DIL1200 1 1 VINV300/600 VINV300/600 In-line ventilator kits DEV900/ 1200* DIL900/1200 DEV900/ 1200* DIL900/1200 DEV900/ 1200* DIL900/1200 Interior duct size 7” (17.8 cm) 7” (17.8 cm) 7” (17.8 cm) Interior—Maximum amps 4.9/5.9 4.9/5.9 5.9 10” (25.4 cm) 11.5 11.5 11.9 11.9 Exterior—Maximum amps 8.7/6.0 8.7/6.0 8.7/6.0 8.5/9.2 8.5/9.2 8.5/9.2 8.5/9.2 In-Line—Maximum amps 6.0/7.9 6.0/7.9 6.0/7.9 10.3 10.3 10.7 10.7 Exterior ventilator kits Exterior duct size ” 36 cm) .4 (91 Number of lights Interior ventilator kits cm 66” Duct cover width Heat lamps 30 (76”mi .2 n. c 3 6 t o m) (91”ma .4 x. 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft. ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft. NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods. 14 15 ) Interior Ventilator Dimensions (VCWH Chimney Wall Hoods) Exterior Ventilator Dimensions (VCWH Chimney Wall Hoods) Top View Top View 12” (30.5 cm) A 30”W. 36”W. 42”W. A 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 30”W. 36”W. 42”W. B 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 120V power supply 1-1/2” (3.8 cm) 12” (30.5 cm) A 8” (20.3 cm) 1-1/2” (3.8 cm) 7” (17.8 cm) dia. duct location 30”W. 36”W. 42”W. A 14-15/16” (37.9 cm) 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 30”W. 36”W. 42”W. B 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 1-1/2” (3.8 cm) 120V power supply 8” (20.3 cm) 1-1/2” (3.8 cm) 10” (25.4 cm) dia. duct location B B 300 or 600 CFM Interior Ventilator Installation for 30”, 36”, & 42” models 900 or 1200 CFM Exterior or In-Line Ventilator Installation for 30”, 36”, & 42” models Top View Top View C 1-1/2” (3.8 cm) 120 V power supply C A 23-15/16” (60.8 cm) 26-15/16” (68.4 cm) 29-15/16” (76.0 cm) 32-15/16” (83.7 cm) 48”W. 54”W. 60”W. 66”W. B 47-7/8” (121.6 cm) 53-7/8” (136.8 cm) 59-7/8” (152.1 cm) 65-7/8” (167.3 cm) 120 V power supply A A 48”W. 54”W. 60”W. 66”W. 1-1/2” (3.8 cm) 6” (15.2 cm) 1-1/2” (3.8 cm) 48”W. 54”W. 60”W. 66”W. 10” (25.4 cm) dia. duct location C 18” (45.7 cm) 18” (45.7 cm) 24” (61.0 cm) 24” (61.0 cm) 48”W. 54”W. 60”W. 66”W. A 23-15/16” (60.8 cm) 26-15/16” (68.4 cm) 29-15/16” (76.0 cm) 32-15/16” (83.7 cm) 48”W. 54”W. 60”W. 66”W. B 47-7/8” (121.6 cm) 53-7/8” (136.8 cm) 59-7/8” (152.1 cm) 65-7/8” (167.3 cm) 6” (15.2 cm) 1-1/2” (3.8 cm) 48”W. 54”W. 60”W. 66”W. C 18” (45.7 cm) 18” (45.7 cm) 24” (61.0 cm) 24” (61.0 cm) 10” (25.4 cm) dia. duct location B B 1200 CFM Interior Ventilator Installation for 48”, 54”, 60”, & 66” models 900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation for 48”, 54”, 60”, & 66” models 16 17 Dimensions & Specifications Clearance Dimensions (VIH Island Hoods 36”, 42”, 54”, & 66”) (VIH Island Hoods) 1 (30 2” .5 cm ) (15 6” .2 cm ) 1 (45 8” .7 cm ) 36”W. 42”W. 54”W. 66”W. A (Hood width) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) ” 30 cm) A .2 (76 66 (16 ”m 7.6 in. c 72 t o m) ” (18 ma 2.9 x. cm ) NOTE: Optional duct cover sold separately. VIH Island Hoods Description Duct cover width cm 36” 42” 54” 66” 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) Duct cover depth 12” (30.5 cm) Duct cover height 12” (30.5 cm) Number of lights 4 4 6 8 Number of filters 4 4 6 8 Interior ventilator kits VINV600/1200* VINV600/1200* VINV1200* VINV1200* Exterior ventilator kits DEV900/1200* DEV900/1200*/1500** DEV1200*/1500** DEV1200*/1500** DIL900/1200 DIL900/1200 DIL1200 DIL1200 7” (17.8 cm)/ 10” (25.4 cm) 7” (17.8 cm)/ 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) Interior—Maximum amps 4.6/7.7 4.6/7.7 8.5 9.3 Exterior—Maximum amps 7.4/4.7 7.4/4.7/5.5 5.5/6.2 6.3/7.1 In-Line—Maximum amps 4.7/6.5 4.7/6.5 7.3 8.1 Interior duct size ) ” 3 6 cm ) .4 (91 N/A Heat lamps In-line ventilator kits 30 (76”mi .2 n. c 36 to m) ” (91 ma .4 x. 10” (25.4 cm) Exterior duct size * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft. ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft. NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods. 18 19 Interior Ventilator Dimensions (VIH Island Hoods) Exterior Ventilator Dimensions (VIH Island Hoods) Top View Top View A 36”W. 42“W. 54”W. 66”W. 36”W. 42“W. 54”W. 66”W. A 17-15/16” (45.6 cm) 20-15/16” (18.2 cm) 26-15/16” (68.4 cm) 32-15/16” (83.7 cm) B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) 18-3/4” (47.6 cm) 9-3/8” (23.8 cm) 4-5/8” (11.7 cm) 120 V A 5/8” (1.6 cm) A 17-15/16” (45.6 cm) 20-15/16” (18.2 cm) 26-15/16” (68.4 cm) 32-15/16” (83.7 cm) 36”W. 42“W. 54”W. 66”W. B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) 9-1/8” (23.2 cm) 9-5/8” (24.4 cm) 7” (17.8 cm) dia. duct location 36”W. 42“W. 54”W. 66”W. 1-1/16” (2.7 cm) 8-1/4” (20.9 cm) 6-7/16” (16.4 cm) 5-15/16” (15.1 cm) 9-3/4” (24.8 cm) 120 V 3” (7.62 cm) 2-1/2” (6.35 cm) 10” (25.4 cm) dia. duct location B B 600 CFM Interior Ventilator Installation for all Island Hoods 900 or 1200 CFM Exterior or In-Line Ventilator Installation for all Island Hoods Top View Top View A 36”W. 42“W. 54”W. 66”W. 36”W. 42“W. 54”W. 66”W. A 17-15/16” (45.6 cm) 20-15/16” (18.2 cm) 26-15/16” (68.4 cm) 32-15/16” (83.7 cm) B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) 18-1/8” (50.0 cm) 9-3/8” (23.8 cm) 5-1/2” (14 cm) 120 V 10” (25.4 cm) dia. duct location A 36”W. 42“W. 54”W. 66”W. A 17-15/16” (45.6 cm) 20-15/16” (18.2 cm) 26-15/16” (68.4 cm) 32-15/16” (83.7 cm) 36”W. 42“W. 54”W. 66”W. B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) 8-3/8” (21.3 cm) 9-1/4” 9-1/2” (23.5 cm) (24.1 cm) 18-3/4” (47.6 cm) B 8-3/16” (20.7 cm) 6-5/8” (6.35 cm) 5-15/16” (15.1 cm) 120 V 9-3/4” (24.8 cm) 3” (7.62 cm) 2-1/2” (6.35 cm) 10” (25.4 cm) dia. duct location B 1200 CFM Interior Ventilator Installation for all Island Hoods 900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation for all Island Hoods 20 21 Dimensions & Specifications Clearance Dimensions (VCIH Chimney Island Hoods 36”, 42”, 54”, & 66”) (VCIH Chimney Island Hoods) A 36”W. 42”W. 54”W. 66”W. A (Duct width) 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 24” (70.0 cm) 36”W. 42”W. 54”W. 66”W. B (Duct height) 12” (30.5 cm) or 24” (61.0 cm) or 36” (91.4 cm) 36”W. 42”W. 54”W. 66”W. C (Hood width) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) (15 6“ .2 cm ) B 1 (45 8” .7 cm ) ” 30 cm) C 66 .2 (76 (16 ”m 7.6 in. c 72 t o m) ” (18 ma 2.9 x. cm ) NOTE: Optional duct cover sold separately. VCIH Chimney Island Hoods Description Duct cover width m) 36” 42” 54” 66” 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 24” (70.0 cm) Duct cover depth 12” (30.5 cm) Duct cover height 12” (30.5 cm) or 24” (61.0 cm) or 36” (91.4 cm) 30 (76”mi .2 n. c 36 to m) ” (91 ma .4 x. c Number of lights 4 4 6 8 Number of filters 4 4 6 8 Interior ventilator kits VINV600 VINV600 VINV1200* VINV1200* Exterior ventilator kits DEV900/1200* DEV900/1200*/1500** DEV1200*/1500** DEV1200*/1500** In-line ventilator kits DIL900/1200 DIL900/1200 DIL1200 DIL1200 Interior duct size 7” (17.8 cm) 7” (17.8 cm) 10” (25.4 cm) 10” (25.4 cm) Interior—Maximum amps 4.6 4.6 8.9 9.3 Exterior—Maximum amps 7.4/4.7 7.4/4.7/5.5 5.6/6.4 6.4/7.4 In-Line—Maximum amps 4.7/6.5 3.9/5.7 7.4 7.4 ” 3 6 cm ) .4 (91 N/A Heat lamps 10” (25.4 cm) Exterior duct size * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft. ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft. NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods. 22 23 Interior Ventilator Dimensions (VCIH Chimney Island Hoods) Exterior Ventilator Dimensions (VCIH Chimney Island Hoods) Top View Top View 12” (30.5 cm) 36”W. 42”W. A 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 36”W. 42”W. B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 1-1/8” (2.9 cm) 12” (30.5 cm) 120 V power supply A 36”W. 42”W. A 17-15/16” (45.6 cm) 20-15/16” (53.2 cm) 36”W. 42”W. B 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 1-1/8” (2.9 cm) 6” (15.2 cm) 1-1/8” (2.9 cm) 120 V power supply A 1-1/8” (2.9 cm) 6” (15.2 cm) 7” (17.8 cm) dia. duct location 10” (25.4 cm) dia. duct location B B 600 CFM Interior Ventilator Installation for all Chimney Island Hoods 900 or 1200 CFM Exterior or In-Line Ventilator Installation for all Chimney Island Hoods Top View Top View C 54”W. 66”W. A 26-15/16” (68.4 cm) 32-15/16” (83.7 cm) 54”W. 66”W. B 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) 54”W. 66”W. C 18” (45.7 cm) 24” (61.0 cm) 1-1/8” (2.9 cm) A 1-1/8” (2.9 cm) 6” (15.2 cm) C 120 V power supply 10” (25.4 cm) dia. duct location B 54”W. 66”W. A 26-15/16” (68.4 cm) 32-15/16” (83.7 cm) 54”W. 66”W. B 53-7/8” (136.8 cm) 65-7/8” (167.3 cm) 54”W. 66”W. C 18” (45.7 cm) 24” (61.0 cm) 1-1/8” (2.9 cm) A 120 V power supply 1-1/8” (2.9 cm) 6” (15.2 cm) 10” (25.4 cm) dia. duct location B 1200 CFM Interior Ventilator Installation for all Chimney Island Hoods 900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation for all Chimney Island Hoods 24 25 Installing Hood Canopy Dimensions & Specifications (VBCV Wall Custom Ventilator System 30”, 36”, 42”, 48”, 54”, 60” & 66”) (Custom Hood Canopy Cutouts) A* *For best results, center the unit over the burners of the cooking product (front to back; right to left). Make sure the back wall of the custom hood canopy is flush with the cutout so the ventilator system may be mounted as shown on page 25. B* Custom Hood Canopy A B Bottom Cutout Dimensions Wall Hoods Description 30” 36” 42” 48” 54” 60” 66” A (Hood Width) W. W. W. W. W. W. W. B (Hood Depth) 27-7/16” (69.7 cm) 33-7/16” (84.9 cm) 39-7/16” (100.2 cm) 45-7/16” (115.4 cm) 51-7/16” (130.7 cm) 57-7/16” (145.9 cm) 63-7/16” (161.1 cm) 21-7/16” 21-7/16” 21-7/16” 21-7/16” 21-7/16” 21-7/16” 21-7/16” (54.5 (54.5 (54.5 (54.5 (54.5 (54.5 (54.5 cm) cm) cm) cm) cm) cm) cm) 1) Position ventilator system inside of the custom hood canopy and center it front to back and left to right. VBCV Wall Custom Ventilator System Description 30” 36” 42” 48” 54” 60” 66” Number of lights 2 2 2 3 3 4 4 Number of filters 2 2 2 3 3 4 4 1 2 2 2 2 Heat lamps Interior ventilator kits Exterior ventilator kits In-line ventilator kits Interior duct size 1 1 VINV300/ 600/1200* DEV900/ 1200* DIL900/1200 VINV300/ 600/1200* DEV900/ 1200* DIL900/1200 VINV600/ VINV1200* VINV1200* VINV1200* VINV1200* 1200* DEV900/ DEV1200*/ DEV1200*/ DEV1200*/ DEV1200*/ 1200* 1500** 1500** 1500** 1500** DIL900/1200 DIL1200 DIL1200 DIL1200 DIL1200 7”/10” 7”/10” 7”/10” 10” (17.8/25.4 cm) (17.8/25.4 cm) (17.8/25.4 cm) (25.4 cm) Exterior duct size 10” (25.4 cm) 10” (25.4 cm) Built-In Ventilator System 2) Bottom mounting holes fasten ventilator system to bottom of custom hood canopy with the screws provided. 3) OPTIONAL Rear mounting holes fasten ventilator system to rear of custom hood canopy. 10” (25.4 cm) 10” (25.4 cm) Interior—Maximum amps 5.9/9.0 5.9/9.0 5.9/9.0 11.5 11.5 11.9 11.9 Exterior—Maximum amps 8.7/6.0 8.7/6.0 8.7/6.0 8.5/9.2 8.5/9.2 8.9/9.2 8.9/9.2 In-Line—Maximum amps 6.0/7.9 6.0/7.9 6.0/7.9 10.3 10.3 10.7 10.7 * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft. ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft. NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods. 26 27 Built-In Wall Custom Ventilator System Dimensions (VBCV Models) Clearance Dimensions (VBCV Wall Custom Ventilator System) (Cu sto m 1-1/2” (3.8 cm) 1” (2.54 cm) 1-1/2” (3.81 cm) 7/8” (2.2 cm) 11-1/2” (29.2 cm) Ho od ) 17-1/4” (43.8 cm) 6” (15.2 cm) 5/8” (1.6 cm) 66 5/8” (1.6 cm) 21-7/8” (55.8 cm) 21-7/8” (55.8 cm) (16 ”m 7.6 in. c 7 2 t o m) ” (18 ma 2.9 x. cm ) 30 (76”mi .2 n. c 3 6 t o m) ” (91 ma .4 x. cm ” 36 cm) D ) 8-1/4” (20.9 cm) 9-3/8” (23.8 cm) 120 V 10” (25.4 cm) dia. duct location 5/8” (1.6 cm) 4-5/8” (11.7 cm) 6” (15.2 cm) 5-1/2” (14.0 cm) .4 (91 For 300, 600 or 1200 CFM Interior Ventilator Installation For 900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installation 9-1/4” (23.5 cm) 7” (17.8 cm) dia. duct location 3” (7.6 cm) 120 V 9-5/8” (24.4 cm) 18-3/4” (47.6 cm) 2-1/2” (6.4 cm) 5/8” (1.6 cm) C C 900 or 1200 CFM Exterior or In-Line Ventilator Installation 30”, 36”, 42” W. Models 300 or 600 CFM Interior Ventilator Installation 30”, 36”, 42” W. Models *Note: “Dotted Line” (........) represents cutout. D C 30” W. 36” W. 42” W. 28 D 30” W. 36” W. 42” W. 28-1/4” (71.8 cm) 34-1/4” (87.0 cm) 40-1/4” (102.2 cm) 29 14-1/8” (35.9 cm) 17-1/8” (43.5 cm) 20-1/8” (51.1 cm) Built-In Wall Custom Ventilator System Dimensions (VBCV Models) Dimensions & Specifications (VICV Island Custom Ventilator System 36”, 42”, 54” & 66”) A* D 8-1/4” (20.9 cm) 6” (15.2 cm) 5-1/2” (14.0 cm) 120 V 10” (25.4 cm) dia. duct location 5/8” (1.6 cm) *For best results, center the unit over the burners of the cooking product (front to back; right to left). 3” (7.6 cm) 2-1/2” (6.4 cm) Make sure the back wall of the custom hood canopy is flush with the cutout so the ventilator system may be mounted as shown on page 30. B* C Bottom Cutout Dimensions 1200 or 1500 CFM Exterior or In-Line Ventilator Installation 48”, 54”, 60”, 66” W. Models Island Hoods Description 18-1/2” (50.0 cm) 9-3/8” (23.8 cm) D 5-1/2” (14.0 cm) 10” (25.4 cm) dia. duct location 8-3/8” (21.3 cm) 120 V 9-1/4” (23.5 cm) 5/8” (1.6 cm) 36” 42” 54” 66” W. W. W. W. A (Hood Width) Description C *Note: “Dotted Line” (........) represents cutout. C D 30” 36” 42” 48” 54” 60” 66” 30 cm) cm) cm) cm) 36” 42” 54” 66” 4 4 6 8 Number of filters 4 4 6 8 Interior ventilator kits VINV600/1200* VINV600/1200* VINV1200* VINV1200* Exterior ventilator kits DEV900/1200* DEV900/1200*/1500** DEV1200*/1500** DEV1200*/1500** N/A Heat lamps Interior duct size DIL900/1200 DIL900/1200 DIL1200 DIL1200 7” (17.8 cm)/ 10” (25.4 cm) 7” (17.8 cm)/ 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) 10” (25.4 cm) Exterior duct size 28-1/4” (71.8 cm) 34-1/4” (87.0 cm) 40-1/4” (102.2 cm) 46-1/4” (117.5 cm) 52-1/4” (132.7 cm) 58-1/4” (148.0 cm) 64-1/4” (163.2 cm) (70.0 (70.0 (70.0 (70.0 Number of lights In-line ventilator kits W. W. W. W. W. W. W. 27-9/16” 27-9/16” 27-9/16” 27-9/16” VICV Island Custom Ventilator System 9-1/2” (24.4 cm) 1200 CFM Interior Ventilator Installation 30”, 36”, 42”, 48”, 54”, 60”, 66” W. Models 30” 36” 42” 48” 54” 60” 66” B (Hood Depth) 33-7/16” (84.9 cm) 39-7/16” (100.2 cm) 51-7/16” (130.7 cm) 63-7/16” (161.1 cm) W. W. W. W. W. W. W. 14-1/8” (35.9 cm) 17-1/8” (43.5 cm) 20-1/8” (51.1 cm) 23-1/8” (58.7 cm) 26-1/8” (66.4 cm) 29-1/8” (74.0 cm) 32-1/8” (81.6 cm) Interior—Maximum amps 4.6/7.7 4.6/7.7 8.5 9.3 Exterior—Maximum amps 7.4/4.8 7.4/4.8/5.5 5.6/6.2 5.6/6.2 In-Line—Maximum amps 4.7/6.5 4.7/6.5 7.3 8.1 * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft. ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft. NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods. 31 Installing Hood Canopy Clearance Dimensions (Custom Hood Canopy Cutouts) (VICV Island Custom Ventilator System) Custom Hood Canopy A (Cu sto m B Ho od ) 66 (16 ”m 7.6 in. c 7 2 t o m) ” (18 ma 2.9 x. cm ) 1) Position ventilator system inside of the custom hood canopy and center it front to back and left to right. 30 (76”mi .2 n. c 3 6 to m) ” (91 ma .4 x. cm Built-In Ventilator System ” 36 cm) .4 (91 2) Bottom mounting holes fasten ventilator system to bottom of custom hood canopy with the screws provided. 3) OPTIONAL Rear mounting holes fasten ventilator system to rear of custom hood canopy. 32 33 ) Built-In Island Custom Ventilator System Dimensions (VICV Models) Built-In Island Custom Ventilator System Dimensions (VICV Models) 1-1/2” (3.8 cm) 1-1/2” (3.8 cm) 1” (2.5 cm) 11/16” (1.7 cm) A B 11-1/2” (29.2 cm) 11-1/2” (29.2 cm) 5-3/4” (14.6 cm) 5-1/2” (14.0 cm) 10” (25.4 cm) dia. duct location 27-7/16” (69.7 cm) (including screw heads) 120 V 9-1/4” (23.5 cm) 2-1/2” (6.4 cm) 9-1/2” (24.4 cm) 18-3/4” (47.6 cm) 28-7/16” (72.2 cm) 28-7/16” (72.2 cm) 5/8” (1.6 cm) 5/8” (1.6 cm) A A 900, 1200 or 1500 External or In-Line Power 42”, 54”, 66” W. Models 1200 CFM Internal Power 42”, 54”, 66” W. Models Internal Power External Power B B 18-3/4” (47.6 cm) 9-3/8” (23.8 cm) 8-1/4” (21.0 cm) 5-3/4” (14.6 cm) *Note: “Dotted Line” (........) represents cutout. B A 6” (15.2 cm) 120 V 1-3/16” (3.0 cm) 3” (7.6 cm) 9-1/4” (23.5 cm) 7” (17.8 cm) dia. duct location 2-1/2” (6.4 cm) 54” W. 66” W. 54” W. 66” W. 52-1/4” (132.7 cm) 64-1/4” (163.2 cm) 120 V 5-3/16” (13.2 cm) 9-5/8” (24.4 cm) 5/8” (1.6 cm) 5/8” (1.6 cm) A A 900 or 1200 CFM External or In-Line Power 36”, 42” W. Models 600 CFM Internal Power 36”, 42” W. Models *Note: “Dotted Line” (........) represents cutout. B A 36” W. 42” W. 8-3/8” (21.3 cm) 10” (25.4 cm) dia. duct location 3” (7.6 cm) 5/8” (1.6 cm) 27-7/16” (69.7 cm) (including screw heads) 10” (25.4 cm) dia. duct location 6” (15.2 cm) 120 V 6” (15.2 cm) 7/8” (2.2 cm) 8-1/4” (21.0 cm) 17-1/4” (43.8 cm) 5/8” (1.6 cm) 18-3/4” (47.6 cm) 36” W. 42” W. 34-1/4” (87.0 cm) 40-1/4” (102.2 cm) 34 17-1/8” (43.5 cm) 20-1/8” (51.1 cm) 35 26-1/8” (66.4 cm) 32-1/8” (81.6 cm) Installation (VWH 10”H. Wall Hoods w/Standard Ventilator) Planning Information Proper installation of ducting is extremely important to ensure maximum performance from any ventilation product. • All CFMs are based on tests at 0.1 static pressure: without applying static pressure, CFM would be greatly overstated. • Straight runs and gradual turns are best; for example, each 90º elbow is equivalent to 5-10 feet (1.52-3.05 cm) of straight run. • Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance. • Proper performance is dependent on proper ducting; make sure that a qualified and trained installer is used. • Check with a qualified and trained installer or local codes for makeup air requirement, if any. • Max. amp rating for hoods includes recommended ventilator kit rating; all products must be hard wired direct with 2-wire with ground. 2 1 Roof cap 7” round duct 300 or 600 CFM single blower interior-power typical ductwork 4 5/16” nut driver Duct cover or soffit Hood Check damper for unrestricted movement, adjust if necessary. Roof cap 10” round duct Attach transition to damper. Seal with aluminum tape. 1200 CFM single blower interior power typical ductwork WARNING 3 Duct cover or soffit Plan where the duct work will be located. Install proper-sized duct work, and roof or wall cap for the type of blower you are using. Recommended hood locations for the most common installations are shown. Adjust your measurements for various heights of ceilings, soffits, cabinets, or ranges/rangetops. To reduce the risk of fire, electric shock, or injury to persons, observe the following: • Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. • Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Hood Exterior blower 10” round duct 900, 1200, or 1500 CFM exterior power typical ductwork Check Framing Duct cover or soffit Flip hood over and remove electrical box cover. Hood Wall cap Wall Installation exterior power typical ductwork 5 4 1 2 Duct Duct cover or soffit 1 Hood NOTE: Because of the weight of the hood make sure that the mounting screws are driven into the framing and not just the drywall. It may be necessary to drill additional holes in the canopy for proper alignment. NOTE: Wall exhaust must be a minimum of 24” (61.0 cm) from ground. This may vary depending on local codes and geographic location. Electrical Supply Run 120 VAC electrical wiring from service panel to installation location. See Specifications pages for the maximum amp requirements. 36 Insert 6” of electrical wiring through the top of vent hood and secure using wiring restrain. Refer to local codes. Slide duct over transition and tape around joint. 37 11 6 1 5/16” nut driver CAUTION: If not using a duct cover, using screws provided, make sure top mounting screws are secured into soffit or cabinet framing. Use additional mounting screws, if necessary. CAUTION: Secure vent hood to wall using screws provided. Use additional mounting screws and wall anchors, if necessary. 7 8 BARE OR GREEN 3 5/16” nut driver 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. Duct Cover Option (VWH 10”H. Wall Hoods w/Standard Ventilator) 1 2 2 1 1 2 GREEN BLACK WHITE BLACK WHITE Connect black to black, white to white, and the green/bare wire under the green screw. NOTE: Housing wiring must be properly installed for wiring to be correct when wiring unit. Installation 10 9 1 2 Measure distance from ceiling to canopy. Replace electrical box cover. Make connection to breaker box. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. (VWH 10”H. Wall Hoods w/Recirculating Kit) 1 2 1 3 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. 3 Slide spacer front over front lip. Push spacer rear up, then slide back over rear lip. 38 Remove damper and discard with transition. Turn recirculating unit upside down. Place vent hood upside down on recirculating unit. 39 3 8 4 9 BARE OR GREEN 1 1 2 GREEN BLACK WHITE BLACK WHITE Attach with screws and lock washers provided. Connect black to black, white to white, and the green/bare wire under the green screw. NOTE: Housing wiring must be properly installed for wiring to be correct when wiring unit. Attach with screws. WARNING 5 Replace electrical box cover. Make connection to breaker box. 10 11 1 To reduce the risk of fire, electric shock, or injury to persons, observe the following: • Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. • Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Remove electrical box cover. 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. Assemble brackets to baffles and insert charcoal filters. 6 13 12 7 3 1 1 1 5/16” nut driver 2 2 Flip hood over. Insert 6” of electrical wiring through the top of vent hood and secure. Refer to local codes. CAUTION: Secure vent hood. Make sure mounting screws are secured into framing. Use additional mounting screws and wall anchors, if necessary. 40 3 3 2 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. Slide spacer front over front lip. Push spacer rear up, then slide back over rear lip. 41 Installation (VWH 18”H. Wall & VCWH Chimney Wall Hoods) 1 1-1/2”x 3/4” (3.8 cm) x (1.9 cm) wood strip 2 1(413/1 .6 6 cm ” ) 5/16” nut driver 6 5 Slot for wood strip 1 1 5/16” nut driver 2 Measure down 1-13/16 (4.6 cm) from desired height of hood and secure 1-1/2” x 3/4” wood strip (provided locally) to wall using screws provided. Use additional mounting screws to secure hood to wood strip. 3 3 2 Slide spacer front over front lip. Push spacer rear up, then slide back over rear lip. Slide filter front over front lip. Push filter rear up, then slide back over rear lip. Duct Cover Option (VWH 18”H. Wall Hoods) 3 5/16” nut driver 2 1 2 5/16” nut driver CAUTION: Secure vent hood to wall using screws provided. Use additional mounting screws and wall anchors, if necessary. CAUTION: If not using a duct cover, using screws provided, make sure top mounting screws are secured into soffit or cabinet framing use additional mounting screws, if necessary. 4 Measure distance from ceiling to canopy. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. 1 To install ventillation kit refer to ventillation kit installation instructions. 2 3 Slide filter front over front lip. Push filter rear up, then slide back over rear lip. 42 43 Installation (VIH/VCIH Island Hoods) Duct Cover Option (VCWH Chimney Wall Hoods) 1 2 Measure distance from ceiling to canopy. 2 1 Tape to avoid scratching. 3 Check framing where cutout will be. NOTE: 200 lb. limit. Cut appropriate size hole in ceiling. Either 7” or 10” depending on your specific unit and ventillator kit. 4 A1 Mounting options: Using duct cover with ceiling mounting bracket. (Option A - VCIH only) Using threaded rod for additional support. (Option B) 2 Place duct cover top inside duct cover base and lower until desired height is found. Mark height. Use the retaining nuts and bolts to fasten in place and remove tape. Attaching hood directly to soffit or duct cover. (Skip to step 3) Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. Attach duct cover to optional ceiling mounting bracket. A2 B1 5/16” nut driver Attach duct cover to ceiling. The ceiling bracket can be hidden by using a locally supplied trim. 44 Additional support option. Drill holes in all four corners for threaded rod and run rods from hood to ceiling. 45 4 3 5/16” nut driver Service & Registration Service & Parts Only authorized replacement parts may be used in performing service on the appliance. Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be referred to a qualified technician. Run duct work down to bottom edge of duct cover/soffit and secure in place. Make sure the duct does not stick down past the cover. Attach canopy to duct cover/soffit. Seal top of hood to duct with aluminum tape. 5 Record the following information indicated below. You will need it if service is ever required. The serial number and model number for your appliance are located on the identification plate mounted on the inside of the hood canopy. 1 Model number To install ventillation kit refer to ventillation kit installation instructions. _________________________________________ Serial number _________________________________________ 2 3 Date of purchase Slide filter front over front lip. Push filter rear up, then slide back over rear lip. 6 _________________________________________ Date installed 7 _________________________________________ 1 1 Dealer's name _________________________________________ 3 3 Address 2 2 Slide spacer front over front lip. Push spacer rear up, then slide back over rear lip. NOTE: Number of spacers and baffles may vary by model. _________________________________________ Slide filter front over front lip. Push filter rear up, then slide back over rear lip. 46 47