Download artop - Energic plus

Transcript
ENERGIC Plus
AR-TOP [V.140 – January 2011]
USER'S MANUAL
___________________________________________________________________________________________________________________________________________________
AC VOLTAGE SELECTION 3 x 220/380 V
The BOARD FOR INPUT VOLTAGE SELECTION is composed by six terminal blocks, to be
connected in one of the two configurations represented on the picture inside the charger.
PROCEDURE:
•
•
•
Check that the charger is disconnected from AC input and battery;
Open the cabinet and move the three wires (WHITE) in position 220V or 380V;
Close the cabinet.
STEP:1 INTERNAL AUX TRASFORMER in the middle of the picture
a)
220V
14-0
_____________
|
|
|
|
|_____________|
400-X-230-230-0
380V
14-0
_____________
|
|
|
|
|__________ ___|
400-X-230-230-0
- GRAY WIRE
STEP:2
__________________________________________________________________________________________________________________________________________________
Page 9/32