Download User Manual - Boardman Medical Supply

6 ARMS
6.2
Using Swing-Back Arms


1.
2.
3.
Make sure the armrest release lever is in the locked position before using the wheelchair.
This procedure applies to 9000SL, 9000XT, and
9000XDT wheelchairs only.
Front
Swing Back Arm
Armrest
Release
Lever
Unlock the swing-back arms by rotating the armrest release lever
toward the outside of the wheelchair.
Pull the front of the swing-back arm straight up/out of the arm
socket and towards the rear of the wheelchair.
To use the swing-back arm, push the swing-back arm towards the
front of the wheelchair and then downward into the arm socket.

4.
WARNING
Armrest release lever MUST be in the unlocked
position when placing armrest into the arm
sockets.
Rear
Arm Socket
Lock the swing-back arms by rotating the armrest release lever
towards the inside of the wheelchair.
Part No. 1056953
FIGURE 2 Using Swing-Back Arms
47
Invacare® 9000 Series Wheelchair