Download USER MANUAL

78
_______________________________________________________________________
IMPORTANT ADVICES:
•
Remain calm!!
•
Click “MOB” immediately - to mark the position. (Red Button “MOB” on left of
lower task bar).
•
Take in sail calmly and slow down.
•
Stop automatic pilot function with “Stop Autopilot”.
•
Close the active route in the Navigation Mode with “Close Route”.
•
Start “MOB” with “Go to MOB”.
•
Arriving at the position “MOB” and the person is back on board, stop the automatic
pilot function with “Stop Autopilot”.
•
Go to menu “Route” in the Planning Mode and delete the marked position “MOB”
with “Delete MOB”.
•
All other functions (such like route planning and route navigation) can now be
reactivated via track control.
ADVICE:
We recommend you to practice the function “MOB” repeatedly to get used to this
process. It is a function for safety, which meant to save lives. This process must be
perfect .
CAUTION:
The “MOB” function can only be activated when the data connection between GPS
and “NaviCharT” is active.
“MOB” function can be canceled only when “Go to MOB” was active and then
interrepted by “Stop Autopilot” under the menu “Navigator”. Only after this
process, the function “Delete MOB” can be executed in the menu “Route”.
Manual „NaviCharT“ Version 4.0 Update 20.07.2006