Download User-Manual - Howard Computers

14
Press F9.
At the confirmation message, select [Yes] and then press Enter.
The Setup Utility settings excluding the password(s) will return to the default values.
15
Press F10.
At the confirmation message, select [Yes] and press Enter.
The Setup Utility will close, and the computer will restart.
Start the Setup Utility and change the settings as necessary.
18
Perform Windows Update.
To change the drive letter of hard disk or CD/DVD drive
NOTE
Drive letters of hard disk can be changed only when two or more partitions have been created on the hard disk drive.
The name of the C: drive cannot be changed.
Change the drive letters before installing applications.
A Click
(Start) - [Control Panel] - [System and Maintenance] - [Administrative Tools], and double-click [Computer Management].
• A standard user needs to enter an administrator password.
B Click [Disk Management] from [Storage].
C Right-click the hard disk partition or the CD/DVD drive name, and click [Change Drive Letter and Paths...].
D Click [Change...].
E Click [Assign the following drive letter] and select the new drive letter, and then click [OK].
At the confirmation message, click [Yes].
Useful Information
17
Getting Started
page 11).
Troubleshooting
Perform the “First-time Operation” (
Appendix
16
21