Download syslib-rm051 - Literature Library

E300 Overload Relay (EtherNet/IP) (P_E300Ovld)
Simulation
The P_E300Ovld Add-On Instruction does not have a Simulation capability.
Execution
The following table explains the handling of instruction execution conditions.
Condition
Description
EnableIn False (false rung)
No EnableInFalse logic is provided. Instruction parameters hold
their last values.
Powerup (prescan, first scan)
Any commands that are received before first scan are discarded.
Embedded P_Alarm instructions are handled in accordance with
their standard power-up procedures. See the Reference Manual for
the P_Alarm Instruction for more information.
Postscan (SFC transition)
No SFC postscan logic is provided.
See the Logix5000 Controllers Add-On Instructions Programming Manual,
publication 1756-PM010, for more information.
22
Rockwell Automation Publication SYSLIB-RM051B-EN-P - April 2015