Download USER MANUAL

USER MANUAL
Control Functions
(1) Previous Track
(2) Volume Up
(3) Skip Track
(4) Volume Down
(5) Power & Pause/Play
(6) LED Indicator
Connection Ports
(9)
(7) 3.5mm line-in port
(8) USB charging port
(9) Reset button
Basic Operation
● To Turn ON/OFF: Press the (5) Button to turn ON, and to turn OFF
hold down (5) until the indicator light turns red.
● To CONNECT to devices without Bluetooth: Connect speaker to
the device using the line-in cable provided. (Note: The buttons on
the speaker will not function when connected via a cable)
● To RECHARGE the battery: Connect speaker to a USB power
source/plug using the USB Cable provided. (Note: Speaker can still
be used whilst charging)
● For CONFERENCE calling: Connect speaker to a mobile phone
using the line-in cable provided.
BLUETOOTH CONNECTION:
● Switch on your device’s Bluetooth, and search for devices but
ensure all other devices are switched off.
● Simply click the (5) button on the Beat Box and the speaker will
automatically go into pairing mode.
● After searching on your device’s Bluetooth, select ‘Beat Box’ from
the list of found devices. Some devices may require you to press
‘Connect’ or ‘Yes’. (Note: If prompted for a pass key, enter 0000)
● When your device and the Beat Box are paired correctly the
indicator light (6) will stop flashing and remain steadily lit.
Troubleshooting
PROBLEM
SOLUTION
Speaker turns off
automatically
● Recharge the battery.
No connection
● Ensure battery is charged and device is
within range of the speaker.
● Make sure the device is correctly paired via
Bluetooth.
Not functioning
properly
● Restart the speaker.
● If this does not work then push the reset
button on the back of the speaker, by
inserting a narrow object into the hole.
Learn more...
You can find out more about the Beat Box at www.desaia.co.uk