1
Download INTRODUCTION
Transcript
Specifications Axle Alignment: Toe In Hitch Ball Height 0 - 1/8” (All Models) Camber 0 - 1 ° positive (All Models) The proper height will vary according to the weight you carry and the tires you use. However, checking the height on your trailer is relatively easy: Tire Size ST225/75R15 (All Models) 1. With trailer on fairly level ground measure from ground to bottom of frame, front and rear. Tire Inflation (PSI) Cold I ST225/75RI5 LRD 65 psi 2. Adjust front jack until measurements are equal Wheel Torque 3. Now measure from ground to the inside top of ball coupler. This figure is Aluminum - 110 Ft. Lbs. the hitch height. The hitch ball is then usually set 1/2” to 1” higher, according Steel - 100 Ft, Lbs. to the spring weight of your tow vehicle, to allow for it to settle when the trailer is hitched up. I-2
