Download Manual - Rainbow Electrical and Security

SECURING THE PROTECTED SITE
Switching from ‘AWAY’ to ‘HOME’
Do not disarm the system - just press
. Since
this operation reduces the security level, the
PowerMax+ will ask you to key in your master user
code or user code, thus making sure that you are an
authorized user.
PRESS
___
HH:HH
If an alarm occurred while the system was armed in
the AWAY mode, the display will respond differently:
RESULTANT DISPLAY
ENTER CODE
[Enter code]
Move to
interior zone
ARMING INSTANT
(alternating)
Go to an
internal zone
___
ARMING HOME
↓ (Exit delay) ↓
HOME
HH:HH
(alternating)
ARM HOME MEMORY
ARM flashes during the armed state.
Forced Arming
(Not to be used in UL- listed systems)
Forced arming allows you to arm the system even
though one zone or several zones are disturbed, and
the NOT READY message is displayed.
Automatic forced arming only works if the installer
allowed this option while programming your system.
Disturbed zones will be bypassed - they will not be
armed. The protected site will not have maximum
protection.
Note: When forced arming is carried out, the buzzer
“protests” by emitting a continuous tone during the exit
delay until the last 10 seconds of the delay. You can
silence this signal by pressing the arming button again.
When NOT READY is displayed, Forced arming
“AWAY” is performed as follows:
Arming ‘Instant’
RESULTANT DISPLAY
ARMING AWAY
ARMING INSTANT
(alternating)
PLEASE EXIT NOW
↓ (Exit delay) ↓
AWAY
ARM lights during the armed state.
DE5467U
RESULTANT DISPLAY
ARMING AWAY
You may arm AWAY or HOME without an entry
delay - any detection in any zone will trigger an
immediate alarm.
If you wish to arm AWAY-INSTANT, proceed as
follows.
Vacate the
premises
ARM HOME
HH:HH
(alternating)
ARM indicator flashes during the armed state.
PRESS
PRESS
ARMING HOME
↓ (Exit delay) ↓
ARM HOME INSTANT
↓ (Exit delay) ↓
ARM HOME
RESULTANT DISPLAY
ARMING HOME
ARMING HOME
ARM indicator flashes during the armed state.
PRESS
PRESS
RESULTANT DISPLAY
ENTER CODE
[Enter code]
Move to
interior zone
If you wish to arm HOME-INSTANT, proceed as follows:
↓
PLEASE EXIT NOW
(to
mute the
buzzer)
↓ (Exit delay)
AWAY
↓
ARM lights during the armed state.
When NOT READY is displayed, Forced arming
“HOME” is performed as follows:
PRESS
RESULTANT DISPLAY
ARMING HOME
↓ (Exit delay) ↓
(To
mute the buzzer)
Go to an interior HOME
HH:HH
zone
ARM indicator flashes during the armed state.
WWW.DIYALARMFORUM.COM
9