Download User Manual - Projector Central

[PICTURE] menu
■■[CONTRAST]
■■[MPEG NR]
You can adjust color temperatures centering mainly on
white.
R (RED), G (GREEN), B (BLUE)
Weaken
+1
[ADVANCED MENU] menu items
Default
setting
[CONTRAST R]
0
[CONTRAST G]
0
[CONTRAST B]
0
■■[BRIGHTNESS]
You can adjust color temperatures centering mainly on black.
R (RED), G (GREEN), B (BLUE)
Attention
zz Use a strong setting when projecting an MPEG video.
zz COMPUTER (RGB) signal is not supported.
■■[FRAME CREATION]
Switch settings
+1
[ADVANCED MENU] menu items
Default
setting
[BRIGHTNESS R]
0
[BRIGHTNESS G]
0
[BRIGHTNESS B]
0
zz Setting range: -16 to +16
Switch settings
[OFF]
[MODE1]
[MODE3]
[MODE2]
[OFF]
Deactivate
[MODE1]
Setting for a standard image
[MODE2]
Setting for a theater image
[MODE3]
Setting for a fast moving image
Note
■■[NR]
You can eliminate the noise that occurs when the input
signal deteriorates.
Weaken
zz Setting range: 0 to +3
You can activate the rendering system for fast motion
frames with fewer afterimage.
zz Setting range: -32 to +32
-1
Strengthen
zz With some of the images, it might be difficult to see a
difference in result.
zz If [FRAME CREATION] is set to active, video may be
delayed in some cases. In this case, select [OFF].
Strengthen
zz Setting range: 0 to +3
ENGLISH - 51
Settings
-1
You can eliminate the noise that occurs upon projection for
videos that use MPEG compression.