Transcript
Setup and Description Guide Manual for Door Entry Alarm Item No.: LA-5193 Applications 1. Please check that the speaker is switched to the "Chime" or "Alarm" position. (Off=Silent) Features * Garage Door * Overhead Door * Entrance * Super Market, Restaurant, Warehouse * Retro-Reflection Type * Sensing Range: 0.5~6 meters (18 feet) * Volume Of Speaker: adjustable * Sounding Time: 3~30 seconds adjustable 1 CHIME CHIME OFF ALARM OFF｡ﾗSilent CHIME ALARM ALARM OUTPUT 2. Please check that the timer and volume potentiometers are NOT in their min. Position. OFF｡Silent OFF 2 TIMER VOLUME TIMER VOLUME Contents: Sensor / Reflector / Speaker / Adaptor / Mounting bracket / screw / Manual and Mini screwdriver for speaker Specification Sensing Type Retro-Reflection Type Door Entry Alarm System Sensing Range 0.5~6 meters (18 feet) Input Voltage DC 9~15V Consumption Current 130mA Standby Current 25 mA max. Light Source IR LED Ambient Temperature -20℃~50℃ (-4℉~122℉) Response time of Speaker Chime: 3 sec. Volume of Speaker 0~max. (Adjustable) Alarm Time 30 sec max. (Adjustable) External Chime Output NPN Output Speaker Output Chime / Off / Alarm (Selected by Slide Switch) Mounting Bracket and Screw Included 3. The red LED will illuminate when the beam is properly aligned, if the LED is not on please realign the beam. 4. The reflector should be mounted a minimum of 50 cm from the sensor otherwise it will be impossible to align the beam properly. 3 4 Photoelectric Beam Sensor Reflector Alarm: 30 sec. 50cm(20") Min 5. Make sure the plug of AC/DC adaptor is inserted into the DC 9~15V socket of the speaker 5 6. Make sure the infrared sensor is plugged into the "INPUT"of the speaker and not the "OUTPUT" 6 DC 9~15V DC 9~15V Connection Diagram INPUT INPUT Front View Adaptor DC12V Master Speaker DC 9~15V CHIME DC 9~15V INPUT OFF DC 9~15V ALARM INPUT (For connecting to an accessory, LA-5188 extra speaker or LA-5197 door counter) INPUT OUTPUT 7. “OUTPUT” is for connecting to an optional accessory. LA-5188 extra speaker or LA-5197 door counter Speaker To Sensor Infrared Beam 7 CHIME OFF ALARM OUTPUT Max 6m Photoelectric Beam Sensor TIMER VOLUME Slide Switch: Chime / Off / Alarm Timer Adjuster: 30 Seconds, Max. Volume Adjuster: 0~Max Reflector 8. Please use the supplied screwdriver only. Don not use any other screwdriver, it may damage the screw. 8 Speaker Back View P1 P2 OUTPUT INPUT
