Download USB Flash Disk User Manual

USB Flash Disk
USB 2.0
User Manual
Revision 1.0
LEGEND USB Flash Disk USB 2.0
1
Features & Specifications
¾ Smart and secure removable data storage for business and personal use
¾ Full Compliance with the Universal Serial Bus Specification v1.1 and v2.0
¾ Offers 128MB, 256MB capacities
¾ High performance, Interface burst transfer rate 480Mbit/sec (Max.)
¾ Hi-Speed USB Flash Disk Utility Program allows user to configure their password,
and partition sizes.
¾ Support USB Bus Power.
¾ State-of-the-art NAND Flash Memories
¾ Shock resistant, noise-free and longer data retention
¾ ECC Engine
The hardware ECC engine provides robust capability of error detection and data
correction, and it operates on-the-fly without extra firmware effort.
¾ Support Windows 98SE, Windows ME, Windows 2000, Windows XP, and MAC OS
9 or Higher.
LEGEND USB Flash Disk USB 2.0
2
System Requirement
¾ PC: IBM PC/AT Compatible , iMAC
¾ OS: Windows 98SE,Windows ME, Windows 2000,Windows XP,MAC OS 9.0 or
Higher
¾ Interface: USB 2.0 or USB 1.1
¾ HDD Free Space: 1MB
Note:
¾ Windows 98 SE does not support default Mass Storage Driver. You have to install the
driver bundled with the product.
¾ The application software (GFormat) only can run with Microsoft Windows OS.
LEGEND USB Flash Disk USB 2.0
3
GFormat Application Program User Manual
‹ Files Introduction
¾
Boot (Folder): Make bootable disk must files in this folder
¾
BMPLib.dll: This Library of GFormat.exe
¾
FlashKey.exe: Enable Security
¾
FmtUsblib.dll: This Library of GFormat.exe
¾
GFormat.exe: GFormat Application program
Note: You need copy the “GFormat Folder” to Hard Disk form your USB Flash Disk
before run the “GFormat.exe” application program , and you must erase “GFormat folder”
on your USB Flash Disk.
LEGEND USB Flash Disk USB 2.0
4
‹ Change Partition Size Function
1. Execute GFormat.exe
LEGEND USB Flash Disk USB 2.0
5
2. Change Partition Size Setting.
Change partition size for your like partition 1 size and partition 2 size.
3. Press “Format” Button
4. Press “Yes(Y)” Button
Note: Change Partition Size, all data on the device will be erasing.
LEGEND USB Flash Disk USB 2.0
6
5. Format Complete, Please replug in your Device.
‹ Enable Security Function
1. Execute GFormat.exe
2. Select “Enable Security” function
LEGEND USB Flash Disk USB 2.0
7
Input your password and confirm your password
Press “OK” button
3. Press “Format” button
LEGEND USB Flash Disk USB 2.0
8
4. Press “Yes(Y)” button
5. Please replug in your device, Enable Security is success.
LEGEND USB Flash Disk USB 2.0
9
‹ Make Bootable Disk Function
1. Execute GFormat.exe
2. Select USB-ZIP or USB-HDD Bootable Disk function
LEGEND USB Flash Disk USB 2.0
10
3. Press “Format” button
4. Press “Yes(Y)” button
5. Format Complete , Make Bootable Disk success.
LEGEND USB Flash Disk USB 2.0
11