Download user manual - VideoTesty.pl

operating the oven electrolux 25
Assisted Cooking with Meatprobe
Automatic
The oven switches itself off automatically when the pre-set core temperature
set is reached.
Important: Only the Meatprobe supplied may be used. If replacing,
please use only original replacement parts.
Example
1. Switch the appliance on using .
2. Using or select the menu option
Assisted Cooking, the desired category and the dish.
3. Confirm each one using .
4. Using or select Meatprobe Automatic.
5. Confirm with .
Message appears telling you to insert
the Meatprobe.
6. Insert Meatprobe (see section Meatprobe).
7. The automatic programme is started.
As soon as the automatic programme
has finished, an audible signal sounds.
8. Press any key to switch off the signal.
9. Remove Meatprobe.
Within a few minutes a provisional
end time at which the set core temperature will be reached is calculated. This time is constantly
recalculated and updated in the display. The system requires that the
Meatprobe is pushed into the meat
and into the socket at the beginning
of the cooking process and that it is
not removed during the cooking
process.
Warning: The Meatprobe is hot!
There is a risk of being burned when
removing the plug and the tip of the
meat probe.