Download A. Simple Reaction Time: (continued)

Model 35600
13
User’s Manual
A. Simple Reaction Time: (continued)
8. Trial Timeout Selection Screen:
Allows the user to set the trial timeout time. If no response is made within the time selected, an error is
indicated for the trial. The time is selectable from 0.1 to 25.5 seconds in 0.1-second increments. The timeout
setting defaults to 3.0 seconds on startup.
Menu Controls:
Button 1:
Button 2:
Button 3:
Button 4:
Button 5:
Button 6:
Button 7:
Button 8:
Increment Trial Timeout by 0.1
Decrement Trial Timeout by 0.1
Increment Trial Timeout by 1
Decrement Trial Timeout by 1
Increment Trial Timeout by 10
Decrement Trial Timeout by 10
Return to Previous Menu Screen
Proceed to Next Menu Screen
(+0.1)
(-0.1)
(+1)
(-1)
(+10)
(-10)
(BACK)
(NEXT)
Note: 5.0 seconds is selected as an example.
9. Test Screen:
Summarizes the test as setup from the menus and displays the trial results. The first two lines of the screen
indicate the stimulus and cue parameters selected for the trial. These settings will update on the onset of each
trial if random parameters are being used. The stimulus line will also indicate if a “GO” or “NO GO” stimulus
is being presented.
10. Trial Results:
After the trial, the “RT” line will show the results of the trial in seconds and the “MSG” line will
indicate a successful trial or an error. If an error occurs, the “MSG” line will specify the error and the
“EADR” will indicate the errant key, if applicable. The “ET” line indicates the time when the error
occurred.
Menu Controls:
Button 1:
Button 2:
Button 3:
Button 4:
Button 5: Run Test
Button 6:
Button 7: Return to Previous Menu Screen
Button 8: Reset Test Screen
(TEST)
(BACK)
(RESET)
Note: The results above are being used as an
example.
Fax: 765-423-4111 . www.lafayetteinstrument.com . E-mail: [email protected]