Download SCH-a870 Series

Section 12
Note: Speaking clearly, say the command that you want to use. If
VoiceSignal does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it tells you
“Sorry, no match found” and cancels voice recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the
phone.
Voice Settings
Choice Lists
When VoiceSignal cannot recognize a name or number,
it displays a choice list of up to three possible choices,
and prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists
with name dialing, digit dialing, and contacts.
To change the way VoiceSignal uses choice lists:
1. In standby mode, press the Menu (left) soft key (
then press
(for Voice SVC),
(for Voice
Settings), and
for Choice Lists.
mno
),
abc
@
2. Use the navigation keys to highlight the Choice List
behavior you prefer:
䢇
䢇
䢇
134
Automatic — VoiceSignal displays a choice list only when it is
not sure if it has correctly recognized the name or number.
Always On — VoiceSignal always displays a choice list, even
when there is only one choice.
Always Off — VoiceSignal never displays a choice list.