Download Kidde 0910 10-Year Sealed Lithium Battery

HAPCO Smoke and CO Alarm Offer
Firex i9010 10-Year Sealed
Lithium Battery-Operated
Smoke AlarmE\.LGGH
Availability:
In stock
Price: Regular Price: $29.99
Special Price: $15.95
No battery replacement for the lifetime of the alarm
Powered by a tamper-free sealed lithium power supply
Self-Activation automatically activates unit when attached to bracket
More Views
Smart Hush silences alarm in non emergencies
Money-saving alarm is great for homes and rental properties
Product Description
No need to worry about faulty batteries with the Kidde L10 10-Year Sealed Lithium Battery-Operated Smoke Alarm. This
worry-free alarm contains a sealed-in lithium power supply that lasts the lifetime of the unit. Dependable and easy to install,
this no-maintenance alarm saves on labor and battery costs over its lifetime.7KLVDODUPLV8//LVWHG
7KH1DWLRQDO)LUH3URWHFWLRQ$VVRFLDWLRQUHTXLUHVVPRNHDODUPVWREHUHSODFHGHYHU\\HDUV
Save up to $60 in Battery Replacement Costs
This worry-free smoke alarm can save you a lot of time and money over its lifetime (an estimated $60 over the 10 year life
of the alarm). This alarm is eco-friendly, as it can save you--and the local landfill--from the cost, hassle, and waste of lots of
batteries. This smoke alarm is also a great choice for hallways and high ceilings, where changing batteries can be
especially difficult. This alarm uses ionization sensing technology for the smoke alarm. Ionization sensing alarms may
detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms
may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends
that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of
fire that can occur within the home.
Great for Homes and Rental Properties
This tamper-free alarm prevents battery or alarm removal, eliminating worry about unauthorized battery removal or
unauthorized deactivation of the alarm. Also, this alarm is a good choice for rental properties and high-density dwellings, as
its sealed tamper-free design prevents theft, while also reducing labor and material costs. This helps to ensure that the
property and inhabitants are protected by a fully operational alarm.
Easy to Install with Self-Activation
The innovative automatic activation of this alarm is unlike any other smoke alarm design. The alarm will automatically
activate when it is attached to the mounting bracket; there are no pull tabs and no switches--everything is automatic. At the
end of the alarm life, the unit will chirp, indicating the alarm is in need of replacement. You can use a simple tool, such as a
screwdriver, to deactivate the unit, stopping the low-battery chirp and making the alarm safe for disposal. The sealed-in
board-mounted batteries will power the unit for its complete 10-year life. No replacement batteries will ever be needed.
Trademarked Hush Feature for Convenience
By pressing the smoke alarm's Hush button, you can easily and safely silence nuisance alarms caused by non-emergency
situations, such as overcooked dinners. This alarm's Smart Hush feature has the capability of temporarily desensitizing the
alarm circuit for up to eight minutes. This feature is to be used only when a known alarm condition, such as smoke from
cooking, activates the alarm.
The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense,
the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every eight seconds while in Hush mode.
This indicates that the alarm is in a temporarily desensitized condition.
Additionally, the smoke alarm will automatically reset after approximately eight minutes and sound the alarm if particles of
combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the
alarm. Pushing the Test/Hush button on the alarm will end the hush period.
Power Outage Protection, Indicator LED, and Test Feature
A 10-year sealed lithium battery powers this alarm, providing continuous protection against smoke and fire hazards even
during power outages. Because a smoke alarm only helps protect you if it's working, this unit features a red LED that
flashes every 40 to 45 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm contains a
Test/Reset button that enables you to periodically test its circuitry and horn.
About Kidde: A UTC Fire & Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire
extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock
in 1818 to the development of the world's first wireless networked smoke detectors in 2004.
What's in the Box
6moke alarm with mounting bracket and mounting hardware, <HDU6HDOHG/LWKLXPbattery, 10-year
limited warranty, and bilingual user's manual.
Additional Information
UOM
EACH
Model
L0
Part #
21008697
Product Dimensions
5.6 inches in diameter x 1.55 inches depth
Weight
.5 lbs
Shipping Weight
8 ounces
Shipping
Currently, item can be shipped only within the U.S.
Batteries
1 Lithium ion battery (built-in)