1
Download Here - SailSeaDancer.com
Transcript
7 WARNING Ask for information about the laws in force in your country or your marina about discharging your waste waters into the sea. Open the water intake valve (ref. 1) (valve handle parallel to the pipe). In the case of a direct discharge into the sea: Open the draining valve (ref. 2). In case you store the waste waters in the tank: Make sure the draining valve is closed (ref. 2) (valve handle perpendicular to the pipe). To drain the bowl, set the control lever of the pump slantwise (FLUSH) then operate the pump. To dry the bowl, set the lever vertical (DRY) then operate the pump. In order to avoid clogging the heads: - Use absorbent paper exclusively. - Schedule a regular rinsing through of the system with fresh water. PRECAUTION Close the valves after each use and above all when the boat is unattended. 91/132 PLUMBING USE OF MARINE HEADS EQUIPPED WITH A WASTE HOLDING TANK (WHT) OPTIONAL EXTRA
