Download User`s Manual - GlacialLight
Transcript
GL-BR30 Installation process User’s Manual 1. Before installation, please turn off the power switch for the existing bulb. 2. Please make sure that the specifications of the lamp connector and the output voltage are compatible to the LED bulb used. Thanks for your choice of LED GL-BR30 series products. Please ensure that you install and use the product according to the below directions to enable the correct implementation and normal OFF functioning of the LED product. Should you not follow these directions, you will not be compensated in accordance with 3. Screw in the lamp set clockwise into the lamp stand and fix lamp securely. the warrantee. We will not take any responsibility from the 4. Please turn on the power. If the lamp does not work, please repeat steps 1~3 until it does work. improper use and implementation of the product, and for any ON associated damage caused by such irresponsible and negligent actions. CAUTION 1. The “Warranty Period” is three (3) years. We will warrant free repair or replacement services if the product fails or becomes defective during normal use within the prescribed warrantee period. Please send back the product to our company or contact your local distributors for further directions. 2. Do not change or tamper with any internal electric circuits or add in any wires or cables for any reason. 3. Do not change the mechanical design, circuit specifications, or components; do not add any other devices as this may cause the product to short circuit or may create other unforeseen risks. 4. Keep the lamp set in a dry environment in order to avoid any electricity leakage. 5. The lifetime of the lamp is effected when used in a full enclosed fixtures. Please make sure the operating ambient temperature range is within the specified definition which is from -20°C to +40°C. 6. When the LED light is in operation, the heat sink body temperature will rise to 50 ~ 60°C, the phenomenon is normal, please feel at ease to use. 7. To avoid electrical shocks and possible malfunction, please do not insert objects of any nature into the LED product. 8. Please do not use a dimming device, as this will cause the LED light to malfunction. 9. For further information, please contact us. • Added weight of the device may cause instability of a free-standing portable lamp. Use only with portable table lamps in which the distance from the bottom of the base to the top of the lamp holder does not exceed three (3) times minimum base width. Use only with portable table lamps which are provided with lamp shades. • This device is not intended for use with emergency exit fixtures or emergency exit lights. LED LIGHT DO NOT STARE INTO BEAM CLASS 2 LED PRODUCT Q ≤ 45.8 mJ λ = 444.9 nm IEC 60825-1 : 1993 + A1:1997 + A2 : 2001 EN 60825-1 : 1994 + A2 : 2001 + A1 : 2002 CAUTION- CLASS 2 LED LIGHT WHEN OPEN DO NOT STARE INTO THE BEAM CAUTION • Risk of electric shock • For dry location only • Do not use with dimmer • Do not use in totally enclosed recessed fixtures Non-dimmable Indoor Only Optical GL-BR30-6WW (Warm White) GL-BR30-6CW GL-BR30-9WW (Cool White) (Warm White) GL-BR30-9CW (Cool White) CCT (Typical) 3000 K 6000 K 3000 K Luminous Flux (lm) 297 lm 396 lm 440 lm 594 lm 42 lm/W 55 lm/W 43 lm/W 58 lm/W > 80 > 75 > 80 > 75 CRI (Ra) 6000 K 120°/ 60° (Option) Beam Angle 98 125 Typical Luminous Efficacy Do not use in a full enclosed fixtures BR30 Series Outlook Specifications Model No. Do not intend to use with emergency lights Lux at 1 M (120°) 104 lux 137 lux 143 lux 176 lux Lux at 1 M (60°) 184 lux 245 lux 295 lux 329 lux Mechanical and Dimension Outline Dim. Ø 98 × 125 (mm) Net. Weight 0.25 (Kgs) Socket Base Cover E26; E27 Clear/ Frosted 8 Ø9 Electrical Typical Power Consumption 7.2 W for GL-BR30-6; 10.4 W for GL-BR30-9 Power Factor > 0.9 for 115V AC; > 0.8 for 230V AC Input Voltage 100 – 240V AC Temperature Condition Operating Temperature -20°C to +40°C Storage Temperature -40°C to +85°C Candle Power Distribution Curve (6 W / 1 M) -15 m 30 - 30 1m -6 0 -4 -7 5 -90 240 180 120 60 0 60 120 180 300 (LUX ) 240 BR30-06W-CW 120° -15 0 30 - 30 200 150 100 50 0 50 100 150 119 -15 250 (LUX ) 200 15 1.73m 30 29 3.46m 5.19m 4m 120 80 40 0 40 80 120 160 200 (LUX ) 5m 8 4 6.93m 8.66m 90 -90 6.93m 75 -7 5 13 -7 5 3m 160 0 - 30 -4 2m 5.19m 200 om lux 5 1m -6 0 3.46m 8.66m 250 60 6 2.89m -6 0 1.73m 90 5m 9 2.3m 75 4m 8 45 17 1.73m 60 3m 39 13 45 2m 5m m 15 -4 1m 156 1.16m BR30-06W-WW 120° om lux 5 m 23 90 300 53 75 4m 2.3m 2.89m 30 -7 5 3m 1.73m 90 5m 11 15 60 2m 75 4m 17 0 45 31 1.16m 0.58m 60 3m 70 -15 - 30 45 2m 211 -90 0.58m om lux -90 280 15 -6 0 lux 0 -4 1m BR30-06W-WW 60° om 5 m 5 BR30-06W-CW 60° 125 100 75 50 25 0 25 50 75 100 125 (LUX ) Candle Power Distribution Curve (9 W / 1 M) BR30-09W-WW 30° BR30-09W-CW 30° -15 m 30 - 30 0.58m -4 -4 -6 0 -7 5 1600 1200 800 400 0 400 800 1200 1600 2000 (LUX ) -15 0 15 m 30 - 30 1m -7 5 4m 2.89m 37 21 400 320 240 160 80 0 80 160 240 320 400 (LUX ) 5m 13 -15 0 15 30 - 30 5 1.73m -4 -6 0 5.19m 8 6.93m 8.66m 250 90 5m 12 -90 4m 75 -7 5 22 3.46m 60 3m 200 150 100 50 0 50 100 150 200 250 (LUX ) All rights reserved. All brand names and trademarks are the properties of their respective owners. The specifications are subject to change without notice. 17-BR30L00002 200 400 600 1000 (LUX ) 800 -15 0 15 30 - 30 0.58m 1.16m 1.73m 2.3m 2.89m 400 90 -90 2.3m om 50 0 5 3m 84 45 2m 200 75 1m 400 -4 2m 1.73m lux 201 600 -6 0 -4 -6 0 1.16m 338 BR30-09W-CW 120° m 800 om 90 5m 15 1000 lux 75 4m 23 2.89m 60 41 2.3m 45 5 0.58m 60 3m 5m 33 BR30-09W-WW 60° lux 94 1.73m 45 2m 52 -90 -90 2000 om 377 1.16m 90 1m 93 75 4m 2.3m BR30-09W-CW 60° ゚ m 210 -7 5 3m 1.73m 2.89m 30 60 2m 90 5m 64 15 0.58m 75 4m 101 0 45 114 1.16m 60 3m 405 -15 - 30 45 2m 840 5 1m om lux -7 5 1623 15 -6 0 lux 0 5 1m om -90 m 320 240 160 80 0 80 160 240 320 400 (LUX )