Download INTRODUCTION MANUAL

Transcript
5
5-2 Adjusting/Debugging Online
5-2-3 Changing Timer Settings
Timer settings can be changed to better suit operating conditions.
1.
2.
Change CP1L to the MONITOR or PROGRAM operating mode.
3.
Input the new value. Click [OK].
The timer setting will be updated.
Double-click the timer setting to be changed.
The Set Timer/Counter Value dialog box will be displayed.
5
Transferring and Debugging Programs
5-2-4 Searching
■Address Reference Tool
The address reference tool displays which instructions are using the address being
pointed to with the cursor. It also allows jumping to another instruction with the
same address.
The address reference tool will display the following items:
• Address at the cursor position
• Variables (local, global)
• Program name, section name
• Program address (step)
• Instruction using the address
88
SYSMAC CP1L Introduction Manual