Download Tiger Explorer
Transcript
Triumph Tiger Explorer special parts 1 Handlebar|Cockpit|Windscreens|Lighting from page 852 2 Seats from page 862 3 Engine guard|Cylinder protection|Fairing from page 864 4 Tank bags from page 874 5 Tail rack bags from page 876 6 Pannier systems from page 882 www.touratech.de/tigerexplorer 4 5 1 2 6 3 852 Triumph Tiger Explorer 853 Handlebar Riser 20 mm Tiger Explorer Original Handlebar On long off-road stretches, the seating position on the Tiger can be a bit tiring. This is where you need Touratech’s 20 mm handlebar riser for the original handlebar on the Triumph Tiger. It makes for a much more relaxed ride, both in a sitting position and when you’re standing up over difficult terrain. You’ll feel the difference in your shoulders and wrists, and you won’t have to worry about getting tired even on long journeys. 420-5255 GPS Mounting Adapter for Handlebar Clamp, Triumph Tiger Explorer Touratech’s GPS mounting adapter for the handlebar clamp on the Triumph Tiger simply attaches onto the Triumph’s handlebar mounting clamps. Nearly all our GPS brackets fit perfectly on its 12 mm strut. For easy, safe attachment of your GPS. Does not block your view of the instruments. 420-5410 Handlebar Crossbar Triumph Tiger Explorer With our handlebar crossbar fitted to your Tiger, you can now also place a roadbook holder, motorcycle computer or navigation systems in your direct field of vision. A very useful part made from aluminium. 040-0604 854 Triumph Tiger Explorer Touratech Hand Protectors GD Triumph Tiger Explorer Enclosed virtually indestructible hand guards with special fitting set for the Tiger Explorer. Reliably protects riders’ hands and levers from damage. Note: at Tiger Explorer only in conjunction with handlebar riser (420-5255). 420-5650 420-5651 420-5652 420-5653 420-5654 (black) (yellow) (blue) (red) (white) You will find matching spoilers for these hand protectors on page 184. Aluminium Handlebar Ends Triumph Tiger Explorer Our handlebar ends are milled from a single piece of aluminium an with colour anodised caps. A small part with a big visual impact at both ends of the handlebar. - Made from anodised aluminium. 420-5245 420-5246 420-5247 420-5248 anodised gold anodised red anodised black anodised titan colour 855 856 GPS Mounting Adapter above Instruments Triumph Tiger Explorer Our „mounting adapter above instruments“ lets you keep your GPS device or road book firmly in view. No more looking down or distractions to the side your eyes are always pointed at the road. The mounting plate attaches neatly to the existing mounting points behind the windscreen on the Tiger. No drilling or laborious modifications required! Nearly all Touratech GPS mounts can be easily fitted to the mounting adapter‘s 12 mm centre strut. 422-5415 Spoiler for Windscreen Triumph Tiger Explorer This spoiler unit is simply clamped to your windscreen. Wind protection can be improved considerably, and the noise level can be minimised when riding at relatively high speeds. If you should then decide to ride off road, the spoiler can be unmounted easily with the clamp mechanism and packed away. Thus, the disadvantage or risk of injury when riding off road is considerably lower than when riding with a higher windscreen. No tools are required for mounting; everything can be performed at the bat of an eye. 044-0410 Spoiler for Windscreen, Lockable Triumph Tiger Explorer The high-quality mechanics can be secured with a lock. This makes quick unmounting or theft considerably more difficult. If you should then decide to ride off road, the spoiler can be unmounted easily with the clamp mechanism and packed away. Thus, the disadvantage or risk of injury when riding off road is considerably lower than when riding with a higher windscreen. No tools are required for mounting; everything can be performed at the bat of an eye. 044-0412 Triumph Tiger Explorer 857 858 Triumph Tiger Explorer Touratech Auxiliary Lights, Fog Light for Tiger Explorer Touratech’s auxiliary fog light for the Triumph Tiger Explorer looks the same as the Xenon headlight and dramatically improves your safety in rain, fog and snow. The high-output lamp delivers a bright piercing light that also helps illuminate the sides of the road at night. Both lights carry the TÜV test mark so there’s no need to have your registration documents updated (where applicable). 422-5475 Fog light left 422-5476 Fog light right 422-5477 Set (fog light left+right) 859 860 Stainless Steel Headlight Protector with Quick Release Fastener (Black) Touratech’s stainless steel headlight protector effectively prevents larger stones from damaging the headlight lens. The latticework creates a rugged off-road look and considerably modifies the bike’s appearance. As well as being a practical product made from laser-cut black stainless steel, it also matches the style of a touring enduro. Another great feature is the quick release fastener that lets you easily clip on the headlight protector and detach it again as needed. And of course the protector comes with everything you need to fit it. 420-5095 Makrolon Headlight Protector with Quick Release Fastener, Tiger Explorer Especially on gravel roads, headlights are always at risk of being damaged by stones thrown up by the vehicle in front. Touratech’s headlight protector for the Triumph Tiger Explorer is made from Makrolon. It effectively protects the fragile lens glass against stones, it’s resilient – in fact, practically indestructible and if it does somehow break it won’t shatter. The headlight protector is also virtually invisible, so it doesn’t affect the bike’s appearance. Another great feature is the quick release fastener that lets you easily clip on the headlight protector and detach it again as needed. And of course the protector comes with everything you need to fit it. 420-5090 Triumph Tiger Explorer 861 862 Comfort Seat for Triumph Tiger Explorer Noticeable improvement all round! The standard seat on the Tiger Explorer has great potential for improvement, both for the rider and pillion passenger. Not only have we modified the shape, hardness and incline of the foam, we also use a bi-elastic, sweat-resistant, non-slip cover material with sealed seams. On the Tiger Explorer it was particularly important to provide thicker foam for the thinly padded pillion seat, to improve comfort on longer journeys. 422-5900 low 422-5901 standard 422-5902 high 422-5907 pillion Comfort seat *breathable* We also offer this popular comfort seat in our <b> patented breathable version </b> for the most discerning riders! The seat construction is based on an open-pored foam core with a spacer fabric around the seat to allow air to flow more easily through the ultra strong, elastic, waterproof textile cover. 422-5904 standard 422-5905 high 422-5910 pillion Triumph Tiger Explorer 863 864 Triumph Tiger Explorer 865 Side Stand Switch Protector, Tiger Explorer The side stand switch on the Tiger Explorer is completely unprotected in a seriously vulnerable position where larger stones or ruts can cause direct damage. This is an extremely annoying shortcoming on difficult terrain, as the switch needs to be bypassed. It’s only when the side stand switch stops working and the bike refuses to start that you realise just how important this component is! Touratech’s protector for the side stand switch on the Tiger Explorer is a resilient guard made from high-grade stainless steel that effectively prevents damage to the switch so it won’t stop you in your tracks. A little part that’s extremely functional! 422-5105 Oil Filler Cap with Special Tool Triumph Tiger Explorer Touratech’s quality oil filler cap for the Triumph Tiger Explorer is milled from aluminium and replaces the plastic oil filler cap. The Touratech oil cap needs a special tool (supplied) to open it. You can also use the tool as a key fob and bottle opener. The tool - which comes with the cap - secures the filler cap against unauthorised access, and means the cap can be opened without fiddling or burning your fingers. Available in gold, red, black and titanium colours. 422-5230 gold 422-5232 black 422-5231 red 422-5233 titanium Cover for Rear Silencer Mount Triumph Tiger Explorer Touratech’s cover for the rear silencer mount is milled from a single piece and replaces the simple bolt that is used to attach the silencer. Available to match the Touratech oil filler cap, frame plugs or swingarm bearing cover in gold, red, black or titanium colours. A visual highlight. 420-5250 gold 420-5252 black 420-5251 red 420-5253 titanium 866 3 2 1 REMUS HEXACONE Muffler Slip-on for Triumph Tiger Explorer With stainless steel core, includes connecting tube, all street legal! Features: - Carbon outlet top and bottom cover - Jacket in stainless steel - Core in stainless steel - Asymmetric hexagonal jacket shape - Dual system with removable sound insert - Weight approx. 3,3 kg for the all-stainless steel model - Increases power and torque - Super sound - Includes connecting tube for original or Remus manifold - Street legal 422-5850 - Stainless Steel 422-5851 - Titanium 422-5852 - Carbon Mirror Extension Triumph Tiger Explorer The mirror extension puts the mirror in a much better position. This improves the rider‘s field of vision. This discreet component increases safety and is almost unnoticeable. It‘s a must for anyone who wants to see more than just their arms in the mirrors. Parts supplied: left and right side. 040-0649 Triumph Tiger Explorer 867 868 Triumph Tiger Explorer 869 Stainless Steel Fairing Crash Bar Triumph Tiger Explorer On a long trip it can easily happen: just a minor fall or bump, and your tank and fairing are damaged. Touratech’s stainless steel fairing crash bar for the Triumph Tiger Explorer protects the plastic fairing around the radiator and frame. If the bike falls over, the crash bar will support it – so those expensive plastic parts will not get scratched or broken. In fact, the crash bar can take a serious beating. As well as being functional, the electropolished stainless steel is a real eye-catcher. It fits in with the frame design and makes the bike look like a proper touring enduro – one that’s sure to make an impression both on the road and over harsh terrain. 422-5160 Highway pegs for Triumph Tiger Explorer Finally - a way to relax your legs on long journeys! These motorway pegs are additional folding foot rests that let you stretch out your legs into a more comfortable position while riding. They make long runs a breeze. Touratech motorway pegs provide optimal grip even for heavy cross boots, thanks to their serrated surface developed in enduro racing. They fold up close to the tube, taking up little space - an obvious advantage if things get tight during an off-road excursion. With their special attachment mechanism, they are an ideal accessory on the Touratech fairing crash bar for the Triumph Tiger Explorer (422-5160). 045-5317 870 Radiator Guard, Trimph Tiger Explorer The radiator on the Explorer’s 3-cylinder engine is pretty large, making it susceptible to dirt and stone impacts. As the original plastic radiator guard provides only limited protection on rough gravel roads, we recommend replacing it with an aluminium radiator guard. Touratech’s radiator guard for the Tiger Explorer offers impeccable protection against stones, optimises airflow and is made from black anodised laser-cut aluminium that unobtrusively blends in with the bike’s overall appearance. It attaches at the existing attachment points. The radiator cover can cause the engine to overheat under extreme conditions with high outside temperatures and an extreme engine load. 422-5015 anodised black 422-5016 anodised alu Decal Set Fork Triumph Tiger Explorer Absolutely strong, thick film protects against stones and other types of damage. Black film with white print. Very easy to apply - strong adhesive. - For both sides 100-0507 Triumph Tiger Explorer 871 Touratech Suspension Triumph Tiger Explorer Many Advantages to other high-end brands! Introducing the new Touratech suspension Touratech have launched a range of topnotch shock absorbers that enable individual tuning for all kinds of uses and set standards for traction, comfort and dynamic safety. There is now a choice of five product lines for different requirement pro files: Level 1, Level 2, High End and Extreme. All shock absorber types are manufactured to the highest engineering and quality standards. You will certainly feel the difference in riding comfort! The shocks were developed for traction, comfort, dynamic safety, reliability and light weight. Every shock has been test driven with Touratech customers in mind. The shocks have been succesfully tested on durability 4 times stricter than the original BMW standards. Last but not least every shock design has been tested by the Touratech experts in Enduro racing. Detailed information on Touratech Suspension and the available versions can be found starting on page 1306! Triumph Tiger Explorer Level 1 Level 2 HighEnd Extreme 422-5860 422-5880 422-5865 422-5870 Progressive Replacement Fork Springs, Front, Triumph Tiger Explorer 422-5838 Hyperpro progressive replacement springs for Triumph Tiger Explorer 422-5839 872 Touratech ACE Suspension. ACE = Actively Controlled Electronic Suspension. Devised and developed by the Tractive team, the inventors of ESA suspension systems The Touratech Suspension ACE system responds at lightning speed to extreme forces such as emergency braking and powerful acceleration. When the bike is loaded for touring and/or carrying a pillion passenger, the ride characteristics can vary greatly and become very tiring. The Touratech Suspension ACE system offers the motorcyclist a high degree of active ride safety and touring comfort. The bike’s wheels stay where they should be: on the road. • • • The Electric Preload Adjuster (EPA) equalises the load on the motorcycle (“balance”). The Dynamic Damping Adjustment (DDA) can be adjusted from comfort to hard sports settings. The Actively Controlled Electronic Suspension (ACE) control unit detects positive or negative acceleration (braking) and actively adjusts the damping as required via the DDA valve. 422-5872 (Triumph Tiger Explorer) Detailed information on Touratech Suspension and available variants can be found starting on page 1306! Touratech Suspension Cartridge Kit Extreme for Triumph Tiger 800 XC from 2011 onwards NEW P 422-5840 EC RA T H ART Scope of delivery: -- 2x Closed Cartridge with damper setting, (1x) rebound stage, (1x) compression stage. With spring preloading via adjustment tool (2x) -- adjustment tool -- ready for installation and ready-to-ride, fitted with pre-mounted fork spring. -- 1 litre oil (for installation of fork) -- user manual and instructions for installation -- 2x Fork protection sticker. TOU Putting it simply, the Touratech Suspension Cartridge Kit Extreme is a suspension strut for the fork and the absolute top end in terms of suspension technology. The Closed Cartridge is installed into the original fork. This way the fork bridge/handlebar mount, brakes and wheel control and handlebar geometry are retained in full. No additional modifications to the fork are required This Closed Cartridge is been developed perfectly for touring and riding with frequent and strongly differing loads and riding conditions or extreme requirements. Triumph Tiger Explorer Mudguard Riser Triumph Tiger Explorer The original mudguard on the Triumph Tiger Explorer is positioned very close to the front wheel. If you use TKC 80 or other similar enduro tyres, the gap gets even smaller. Then you’ll find that even small patches of mud are a problem – the mud builds up and the front wheel could lock. Touratech’s riser for the original mudguard on the Triumph Tiger Explorer is really easy to fit. A stainless steel adapter goes between the tyre and the mudguard, increasing the clearance by 15 mm. You continue using the original mudguard without any modifications. The higher mudguard gives the bike a stylish off-road look and prevents the front wheel locking up. 422-5441 Number Plate Splash Guard Triumph Tiger Explorer This black anodised splash guard is mounted behind the number plate bracket and extends it both downwards and towards the rear of the bike. It therefore effectively prevents dirt and other debris from soiling or damaging your seat, clothing, or luggage. The aluminium splash guard also stabilises the number plate and prevents it working loose due to vibration. Made of black anodised aluminium. 422-5000 Long-Distance Footpegs *Works* Triumph Tiger Explorer These footpegs have proved to be reliable at our motorbike journeys. They offer considerably wider foot base support and also allow longer distances to be covered while standing on the footpegs. - Made of stainless steel - German TÜV Type approval 420-5315 873 874 Side Bags for the Tank Fairing Sections on the Triumph Tiger Explorer, 1 Pair The sides of the tank fairing sections provide enough space for securely attaching add-on bags allowing quick access to smaller items such as a reflective warning vest or first aid kit or even vehicle registration papers, cell phone and wallet. These bags are the perfect supplement to a tank bag, but they can also be used separately. Because of their complementary shape, they do not disturb the original lines of the Tiger Explorer in any way. Their design and colour match those of our tank bag (422-5801 ) and side bags (422-5813) for the luggage rack, thus providing a uniform, consistent appearance. Details: - Soft, slip-proof inner sides prevent scratches and ensure that the bags stay right in place - Water-repellent zippers - Low weight - Volume: 2.3 litres per side - Size (L x W x H): Approx. 34 x 13 x 8 cm - Colour: black/grey - Supplied in pairs Made from Teflon-coated CORDURA, which is water-repellent and dirt-resistant. Caution: Please use paint protection film if necessary. Made in Germany. 422-5803 Triumph Tiger Explorer 875 Tank Bag „Touring“ for Triumph Tiger Explorer This tank bag offers you the ideal option of storing your luggage where it‘s closer to the bike‘s centre of gravity and remains easily accessible. The bag can easily be removed and offers high-quality, practiceproven features. What‘s more, it doesn‘t interfere with turning the handlebars or with riding while standing up. Details: - Foam-filled base plate holds its shape - Reinforced side panels - Convenient organizer compartment in cover with removable pocket for credit cards/coins and loops for holding pens/pencils - Water-repellent cable grommet for routing charging/headphone cables - Map pocket with Velcro fastener (31 x 26 cm and Velcro closure - Mounting kit easily installed with existing screws - Quickly removed by means of front click connectors and rear strap with Velcro fastener - Does not interfere with refuelling - The volume of the bag can be increased by opening its central surrounding zipper - Handy reflective strap for holding gloves or similar items - Water-repellent zippers - One zippered pocket on each side - Two straps supplied with the bag allow it to be used as a rucksack - Sturdy carrying handle - Low weight - Volume: 12/21 litres - Size (L x W x H): Approx. 37 x 24 x 22/32 cm - Rain hood and waterproof inner pockets available as optional accessories - Inner bag for photo equipment available as an optional accessory - 3M reflective patches - Colour: black/grey Made from Teflon-coated CORDURA, which is water-repellent and dirt-resistant. Caution: Please use paint protection film if necessary. Made in Germany. 422-5801 876 055-1218 055-1247 055-1245 Tail Bag for the Pillion Seat for Triumph Tiger Explorer Go for a ride on your own once in a while - our rear pannier is the perfect companion and straps to the pillion seat where it is closer to the centre of gravity. The lowdown: - waterproof zips, - two-part design (base plate can stay on the seat), - secured via two zips, - elastic band on the top - e.g. for gloves, - tabs for extra straps, - carry-straps so you can use the bag as a rucksack, - and reflective trim. Dimensions (L x W x H): approx. 30 x 33 x 21 cm, Volume: approx. 20 litres 055-1218 Streetline Tail Rack Bag „Touring“ Universal The new generation of motorbike luggage systems, in a sportive design. Light, flexibel and in the same style than the tankbag “Touring””. The Rearbag was designed together with the tankbag and builds a nice and practical unit on your motorcycle. The available space of about 21 liters is build out of strong Cordura fabric and is equipped with water repellent zippers. Big 3M reflective applications give an additional security on the bike. Dimensions (l x w x h): approx. 31 x 31 x 23 cm. Volume: approx. 21 litres. 055-1247 Streetline Tail Rack Bag „New Style“ The available space of about 21 litres is build out of strong Cordura fabric and is equipped with waterproof zippers. Big 3M reflective applications give an additional security on the bike. The mounting kit is fixed with velcro under the seat. With two strong zippers the bag is fixed safely on the bag and can be removed easily. Thanks to the handle and the unique design, the bag can be used as handluggage and looks much better than the usual motorbike travelbags. Colour: black, grey. Dimensions (l x w x h): approx. 36 x 26 x 22 cm. Volume: approx. 21 litres. Caution: Please use paint protection film if necessary. 055-1245 Triumph Tiger Explorer Tail Bag for the Triumph Tiger Explorer Luggage Rack We naturally now also have a practical tail bag with expansion for the luggage rack of the Triumph Tiger Explorer. There is space for more than just the rain gear here. Colours: black, grey Dimensions (LxWxH): approx. 22 x 31 x 15/26 cm Volume: approx. 10/17L Made of Teflon-coated CORDURA, therefore waterrepellent. Caution: Please use paint protection film if necessary. 055-1220 Streetline “New Style Flat” Rear Pannier Extra low so there are no problems getting on the bike. The large storage capacity of approx. 11 litres (expandable to 22 litres) is tailored to the space requirements of a mini tour or the daily trip to work. The base is simply attached with Velcro under the seat. The bag can then be secured at lightning speed using the sturdy zip fastener. With its handle and elegant design, the bag is also suitable as hand luggage or a business case. Dimensions (l x w x h): approx. 30 x 33 cm x 13/25 cm / 11 / 22 L Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Caution: Please use paint protection film if necessary. Made in Germany by KAHEDO. 055-1246 Tool Bag under the Rider‘s Seat There‘s plenty of room for additional tools, a reflective jacket or first aid kit under the rider‘s seat. Together with Kahedo, we have developed a special bag for this storage area. This bag makes perfect use of the available space for the above items. Thanks to the offset handle, the bag can easily be pulled out of the compartment. Colour: black Dimensions ( l x w x h): approx. 18 x 16 x 8 cm Volume: approx. 3 litres 613-1004 877 878 Side Bags for the Luggage Rack on the Triumph Tiger Explorer, 1 Pair We now offer a perfectly fitting solution for allowing quick access to smaller items such as a reflective warning vest or first aid kit, designed exclusively for the Tiger Explorer. These side bags are securely attached to the luggage rack by means of straps with velcro tabs. Their design and colour match those of our tank bag (422-5801) and side bags (422-5803) for the tank fairing sections, thus providing a uniform, consistent appearance. Details: - Soft, slip-proof inner sides prevent scratches and ensure that the bags stay right in place - Water-repellent zippers - Low weight - Volume: 2 litres per side - Size (L x W x H): Approx. 37 x 10 x 9 cm - 3M reflective patches - Colour: black/grey - Supplied in pairs Made from Teflon-coated CORDURA, which is water-repellent and dirt-resistant. Caution: Please use paint protection film if necessary. Made in Germany. 422-5813 Triumph Tiger Explorer 879 880 ZEGA Pro Topcase Rack Triumph Tiger Explorer You don’t need any great mechanical skills to fit the Touratech luggage rack for the Zega Pro Topcase to the standard luggage rack on the Triumph Tiger Explorer. The luggage rack attaches securely to four mounting points and can withstand heavier loads than the original product. The Topcase itself is even easier to attach. With Touratech’s ingenious RapidTrap mounting system, the Topcase quickly “clicks” on or off. Made from electropolished stainless steel. 422-5455 Stainless Steel Pannier Rack Triumph Tiger Explorer Touratech‘s stainless steel pannier rack for the Triumph Tiger Explorer is a sturdy rack made of 18 mm stainless steel tubing. This non-rusting system matches the appearance of the Triumph Tiger‘s frame and guarantees extra high stability even off the beaten track. It fits onto the existing attachment points. The extremely strong cross-brace design will withstand heavy off-road use without any trouble and is an elegant complement to the overall styling of the Triumph Tiger Explorer. 422-5555 Triumph Tiger Explorer Universal Travel Bag for Pillion Seat A unique solution for all luggage issues! Specially developed to suit almost any motorbike and designed for multi-purpose use. Because it is easy to attach and remove, our Universal Travel Bag is a flexible and ingenious alternative to fixed pannier systems, even for longer trips. You will find more information on the Universal Travel Bag and the accessories on page 1204! 055-1461 055-1468 Black Edition Aluminium Luggage Rack for Triumph Tiger Explorer Touratech’s aluminium luggage rack fits perfectly on the rear of the Triumph Tiger Explorer where it looks mighty fine. Thanks to the many slots and recesses on this aluminium luggage rack, luggage of almost any shape and size can be safely attached to your bike. The wide shape means that even large items can be secured easily and without difficulty. The aluminium luggage rack is light and yet extremely strong. It comes with all required mounting materials, including the special spacers. 422-5450 881 882 883 Triumph Tiger Explorer 99,0 cm 38 31 107,0 cm 45 38 Pannier System Triumph Tiger Explorer 422-5730 ZEGA Pro *And-S* 31/38 L 422-5731 ZEGA Pro *And-Black* 31/38 L 422-5732 ZEGA Mundo 38/45 L 422-6135 ZEGA Pro 38/45 L 422-5735 ZEGA Pro *And-S* 38/45 L 422-5736 ZEGA Pro *And-Black* 38/45 L 422-5737 Pannier System with: stainless steel rack ZEGA Pro2 - 31/38 L ZEGA PRO2 422-6030 ZEGA Pro2 - AND-S 31/38 L 422-6031 ZEGA Pro2 - AND-Black 31/38 L 422-6032 Pannier System with: stainless steel rack ZEGA Pro2 - 38/45 L 422-6035 ZEGA Pro2 - AND-S 38/45 L 422-6036 ZEGA Pro2 - AND-Black 38/45 L 422-6037 EC RA T H NEW ART 422-6130 ZEGA PRO ZEGA PRO2 P ZEGA Mundo 31/38 L ZEGA Pro 31/38 L TOU The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing ZEGA MUNDO clips and reinforcing pieces.