Download Socket 462 System Board User`s Manual
Transcript
BIOS Setup 3-17 USB Keyboard Support Via: This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment. USB Mouse Support Via: This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment. USB 2.0 Controller: This option enables or disables the USB 2.0 controller. Back to Integrated Peripherals Setup Menu: SuperIO Device: Click <Enter> key to enter its submenu: Onboard Serial Port 1: This is used to specify the I/O address and IRQ of Serial Port 1. Six options are available: Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 AUTO. The default setting is 3F8/IRQ4. Onboard Parallel Port: Sets the I/O address and IRQ of the onboard parallel port. Four options are available: Disable 378/IRQ7 278/IRQ5 3BC/IRQ7. Default setting is 378/IRQ7. Parallel Port Mode: Four options are available: SPP EPP ECP ECP+EPP. The default setting is ECP+EPP mode. EPP Mode Select: Two options are available: EPP1.7 EPP1.9. The default setting is EPP 1.7. When the mode selected for the parallel port mode is EPP, the two EPP version options are available. ECP Mode Use DMA: Two options are available: 1 3. The default setting is 3. When the mode selected for the parallel port mode is ECP, the DMA channel selected can be Channel 1 or Channel 3. User’s Manual