Download MA.R User Manual

Transcript
UNITS button allows the user to
swap between displayed result
type.
Upon drying process completion,
summary of the test is displayed,
final humidity result is held.
Printout footer is sent to a selected
interface (accordingly to set
printout options – parameter group
P5.5 DRYING PROCESS
REPORT).
Drying process may be aborted at any time. Willing to abort the process, the user
must press Start/Stop button and confirm completion by pressing Print/Enter
button.
Manual auto switch-off mode is an exception to the rule – for moisture analyzer
working in this mode, the drying process ends upon pressing Start/Stop button,
there is no need to confirm completion by pressing Print/Enter button.
In order to return to a main window of drying process settings the user shall open a
drying chamber. Moisture analyzer gets back to its initial state, completed process
summary is blanked. The moisture analyzer is ready to perform another test.
104