Download USER``S MANUAL

5. Press the mount on the Front Shield (58) into the
Frame (1). Then, press the Front Shield into the
Left and Right Front Shields (13, 14).
5
1
58
14
13
6. Orient the Upright Cover (57) as shown. Hold the
Upright Cover near the Upright (2), and insert
the wires upward through the Upright Cover.
6
2
Then, slide the Upright Cover (57) onto the
Upright (2).
Wire Tie
57
Wires
7. Orient the Handlebar (7) as shown. While a
second person holds the Handlebar near the
Upright (2), insert the wires upward through the
Handlebar.
7
7
69
Tip: Avoid pinching the wires. Attach the
Handlebar (7) to the Upright (2) with two M8 x
22mm Screws (69).
2
69
Avoid pinching
the wires
8
Wire Tie
Wires