Download USER`S MANUAL

7. While a second person lifts the back of the Right
Pedal Plate (14), insert the Right Pedal Bracket
(133) into the Right Pedal Arm (58).
7
Attach the Right Pedal Bracket (133) with an
M10 x 20mm Screw (91) and an M10 x 25mm
Washer (134). Do not overtighten the Screw;
the Right Pedal Bracket must turn freely.
91 134 14
58
Repeat this step on the other side of the
elliptical.
133
8. Identify the Right Pedal (49), which is marked
with a “Right” sticker, and orient it as shown.
8
49
While a second person lifts the Right Pedal Plate
(14), attach the Right Pedal (49) to the Right
Pedal Plate with five M6 x 16mm Screws (103)
and five M6 Washers (90).
14
12
Attach the Left Pedal (12) to the Left Pedal
Plate (not shown) in the same way.
90
90
103
9. Apply grease to a Medium Axle (119) and to two
M8 x 22mm Washers (97).
103
9
Identify the Right Link Arm (59), which is marked
with a “Right” sticker, and orient it as shown.
Insert the Medium Axle through the Right Link
Arm (59) and the Right Pedal Arm (58).
82
Tighten an M8 x 23mm Button Screw (82), an
Axle Cover (55), and an M8 x 22mm Washer
(97) into each end of the Medium Axle (119) at
the same time.
55
97
58
Repeat this step on the other side of the
elliptical.
119
59
97
55
Grease
9
82