Download Snap-Link User`s Guide - Home Automation, Inc.

The Security Page
The Security Page displays a list of all security areas along with the zones in each area. The security mode of each Area
can be individually set. All areas may be set to the same security mode, by checking the "Apply To All Areas" option of
any area.
In a similar fashion Zones may be bypassed or restored from this page.
Setting Security Modes
Selecting a security area will bring up the "Area Commands and Options" dialog.
This dialog will allow you to set the security mode for the selected area or all areas if the controller has multiple areas.
Zone Commands
Selecting a security zone will bring up the "Zone Commands and Options" dialog.
This dialog will allow you to bypass or restore the selected zone or restore all zones.
Page 9