Download Serial Console Server User Manual

Chapter 8. Device Management
Association
The Association tab lets you make your power management settings, such as
synchronizing on/off/reboot, with associated PON (Power Over the Net™)
devices.
Power Management
The Power Management page is used to associate a PON outlet with a serial
device’s port on the Serial Console Server. Once an association has been made,
the power status of the device attached to the port can be controlled from the
Port Access page, rather than having to control the power status by opening a
separate web session to the PON device.
The page is organized into three main sections, as described in the table, below:
Page Section
Description
PON Associate
Settings
This section is where you associate the Power Over the Net™
PDU’s power outlet(s) with a serial port on the Serial Console
Server.
Outlet Settings
This section is where you set up the power management
configuration for each outlet. Refer to the Outlet Configuration
section of the Power Over the Net™ User Manual’s Administration
chapter for configuration details.
Schedule
This section is where you set up a scheduled Power On/Off
configuration for an outlet. Refer to the Schedule section of the
Power Over the Net™ User Manual’s Administration chapter for
setup details.
113