Download "user manual"

Transcript
Configuring Resources
To configure the NetRef:
1. Expand the hierarchy by selecting Inventory > [NE] > Globals/NetRef to display the NetRef Information pane as shown in Figure 14.
Figure 14. NETREF Information pane
2. Click Edit to the right of the NETREF to configure the corresponding parameters
in the Information pane, as shown in Figure 15.
Figure 15. NETREF General Statistics
3. Configure the Source. This setting indicates the physical interface from which to
clock NETREF. If you select none, the local oscillator will be used.
•
If your BTX-4K has a metallic DS3 interface, you have 171 different choices
for the clock source: none, BITS-1, BITS-2, or any of the 168 channelized DS1
interfaces, e.g., DS3-6/DS1-28.
•
With an optical OC-3 interface, you have 7 choices for the clock source:
none, Bits-1, Bits-2, OC3-1/WORKING-1, OC3-1/PROTECT-1, OC3-2/
WORKING-1, and OC3-2/PROTECT -1.
•
With an optical STM-1 interface, you have 7 choices for the clock source:
none, BITS-1, BITS-2, STM1-1/WORKING-1, STM1-1/PROTECT-1,
BTX-4K Application Manual
40