Download pdf-file

New General Detector Controller
Optical DCS - User Manual
VLT-MAN-ESO-13660-4086
Issue 6.0
04/05/2010
Page 50 of 76
By running:
cd newoitc/src ; make man
the documentation concerning the implementation of post-processing is the installed in the
newoitc/doc directory (in MagicDrawXML and html format)
Shortly:
• In the newoitc ACTION_MYDATA_IN.C file, implement your PostProcessing
method;
• In the newoitcControl.C file, check which actions should be overridden and
which should not be overridden (e.g., do you need or not to override the SETUP
command?);
• In the Makefile file, remove from newoitcControl_OBJECTS the actions that
you do NOT want to override (e.g, SETUP).
9.6.2. How to run the process which implements post-processing
Assuming newoitc to be the name of the module containing the post-processing
implementation, in order to use the new newoitc process, two possibilities are offered:
3) define the DET.CON.ITCPROC setup keyword in the <xx>dcfgCAMERA.cfg
configuration set:
DET.CON.ITCPROC
“newoitc”
4) launch the startup script with the –itc <newoitc> option:
ngcoDcsStart –itc <newoitc>