Download APG013 User Manual

APG013 8-bit RISC Microcontroller
CPU
•
•
8-bit RISC CPU core
Maximum 7.5 MIPS
Instruction Set
•
•
•
43 instructions
Most instructions need 1 system clocks
to execute
Branch instructions need 1 or 2 system
clocks to execute
Memory
•
•
•
64-byte SRAM
1K x 13-bit internal OTP program
memory
10-byte user ID
Watchdog Timer (WDT)
•
•
•
Oscillation Sources
•
•
•
•
•
•
•
•
5 hardware interrupt sources
1 software interrupt instruction
5 level hardware stacks
•
•
5 programmable digital I/O, 1 input port
Programmable internal weak pull-up
resistor
Programmable internal weak pull-down
resistor
Programmable open-drain output
Timer0
•
•
•
•
•
One general purpose 8-bit timer
Timer mode
Counter mode
PWM mode
8-bit programmable prescaler
Reset at 2V or 2.4V
Low Voltage Detector (LVD)
•
•
•
I/O Ports
•
•
External RC oscillator (ERC)
High Frequency Crystal/Resonator
Oscillator (HF)
Crystal/Resonator Oscillator (XT)
Internal RC Oscillator (IRC)
External Resistor/ Internal Capacitor
Oscillator (ERIC)
Power-on Reset (POR)
•
Interrupt Sources
CLRWDT instruction to clear WDT
counter
Programmable postscaler
Programmable overflow timer
System Reset
Voltage monitor
Programmable voltage
detection/indication levels:
1.8V/2.2V/2.4V/2.7V
Operating Temperature Range
•
-40℃ to 85℃
Operating Voltage Range
•
•
2.2V to 3.6V at 1 MIPS
3.3V to 3.6V at 4 MIPS
Package Type
•
•
8-pin DIP/SOP
DIE form
Timer1
•
•
•
One general purpose 8/16-bit timer
Timer mode
Cascade mode
AppoTech Limited
Address
Centre,
:Unit 705-707, 7/F, IC Development
No.6, Science Park West Ave.,
Hong Kong Science Park,
Shatin, N.T., Hong Kong
Telephone
:(852) 2607 4090
Fax
:(852) 2607 4096
www.appotech.com