1
Download POWER ELECTRONICS
Transcript
G8 DUAL SETTING G8.1 DUAL SETTING Screen Description Range Default Value Function Adjust Applications 1 DUALSETING=NO Dual Setting. Yes/No No Enable/Disable a second adjustment for G4 Acceleration, G5 Deceleration and for the overload curve (G3.3 Overload Curve). When a second parameter is required set select Dual Setting to Yes. This second adjustment is activated by one of digital inputs. Mills, crushers and any application that at a certain operation stage requires a harder/softer parameter set. G8.2 TORQUE PULSE 2 Screen Description Range Unit Default Value Function Adjust 2 PLS TORQ2=50% Dual setting Torque Pulse 50 a 100% % of rated Motor torque 50% Choose the torque pulse level applied to the motor for the time specified at G8.3 Set this value in conjunction with G8.3 to initiate a first acceleration of the motor. G8.3 PULSE TORQUE TIME 2 Screen Description Range Units Default Value Function Adjust 3 PLS TQ T2=OFF Dual setting Pulse Time. OFF, 0 to 0.9s Seconds OFF Refer to G4.3. Refer to G4.3 G8.4 INITIAL TORQUE 2 Screen Description Range Default Value Function Adjust 4 INIT TRQ2 =30% Dual setting Initial Torque. 30 to 99% 30% Refer to G4.4 Refer to G4.4 G8.5 INITIAL TORQUE TIME 2 Screen Description Range Units Default Value Function Adjust 5 INIT TQ T2=1s Dual setting Initial Torque Time . 0 a 10 seconds 1 Refer to G8.4 Refer to G4.5 G8.6 ACCELERATION TIME 2 Screen Description Range Units Default Value Function Adjust 62 6 ACC TIME2=12s Dual Setting Acceleration Time. 0 to 180 Seconds 12 Refer to G4.6 Refer to G4.6 POWER ELECTRONICS Technical Manual V5 MT0001 Rev. F
