Download IMAQ Vision for LabVIEW User Manual

Appendix A
Vision for LabVIEW Real-Time
Closing the Timed Environment
When time-bounded execution is no longer needed, call IMAQ Uninitialize
Timed Execution (Vision Utilities»IMAQ RT) to release the resources
reserved at initialization. When the environment is uninitialized, calls to
IMAQ Start Timed Execution produce an error.
Image Files
Many applications require you to use external files, such as the template
files used by pattern matching and spatial calibration functions. Before
running your application on an RT target, you must use FTP to transfer any
external image files from your host machine to your remote target. You can
use MAX 3.0 and later to FTP images to your RT target. Refer to the
LabVIEW Real-Time Module User Manual for more information about
using FTP.
Deployment
When you have finished developing your Vision for LabVIEW RT
application, you may want to deploy that application to a number of remote
systems. To achieve consistent results from your Vision for LabVIEW RT
application, you must configure these deployed systems with the same
settings you used for your development system.
Each deployed system must have its own embedded real-time controller and
software. Visit ni.com for ordering information.
Note
You must purchase a Vision for LabVIEW RT run-time license and a LabVIEW
Real-Time Module run-time license for each deployed Vision for LabVIEW RT system.
Visit ni.com for more information about purchasing run-time licenses.
Note
© National Instruments Corporation
A-9
IMAQ Vision for LabVIEW User Manual