Download User Manual MP134E - Physik Instrumente

5 Installation
Connecting the Q-522.x00 to E-870 drive electronics with
a Mini-DIN 4 socket
1. Connect the Q-522.x00 with the adapter cable:
−
Connect the Sub-D 15 (m) connector of the Q-522 with the connector of
the adapter cable (Sub-D 15 (f)).
2. Connect the adapter cable with the drive electronics:
a)
b)
Connect the Mini-DIN 4 connector of the adapter cable with the
Mini-DIN 4 socket of the drive electronics.
Take suitable measures to prevent the adapter cable from being
accidentally disconnected.
Connecting the Q-522.x00 to E-870 drive electronics with
a connector strip
 Connect the Q-522.x00 to the connector strip of the drive electronics using a
suitable adapter.
5.5.2 Connecting the Q-522 to the Controller
INFORMATION

For information regarding the connection of a vacuum-compatible Q-522, contact
the customer service department (p. 45).
Prerequisites

You have read and understood the general notes on installation.

You have installed the E-871 controller (p. 14).

You have read and understood the user manual of the controller.

The controller is switched off, i. e. the power supply is not connected to the
power socket via the power cord.
Tools and accessories

30
Y adapter cable 7202500043-0015, in the scope of delivery (p. 13).
Version: 1.0.0
MP134E
Q-522 Miniature Stage