Download User Manual

Function name:
RSTP Port Configuration
Function description:
Enable or disable RSTP protocol on the ports that are selected and set path
cost.
Parameter description:
Protocol Enabled:
Just tick the check box () beside the port x to enable RSTP protocol,
then press the <Apply> button to apply.
Edge:
Just tick the check box () beside the port x to enable edge function.
Path Cost:
Path cost is the cost of transmitting a frame on to a LAN through that port.
It is assigned according to the speed of the bridge. The slower the media,
the higher the
Fig. 4-11 RSTP Configuration
61
Publication date:Nov., 2012
Revision A1