Download User Manual for GPS Tracking System Contents

NETWORK TECHNOLOGY
User Manual for GPS
Tracking System
Contents
Website Descrip on ....................................................................................................... 2
How to add Vehicle ........................................................................................................ 4
How to add a Secondary User........................................................................................6
How to set the Geo-fence ............................................................................................10
How to see the Track Replay .......................................................................................12
How to send the “Take photo ”commend on the pla orm ........................................ 14
NETWORK TECHNOLOGY
Website Descrip on
1.At this sec on, if the tracker installs success and can get the GPS signal, the car will be blue and
it will get the loca on on the map. If no, then the car will be grey.
Words in red means the Use me have been expired.
2.At this sec on on the map, when the car is running, there is the speed of the car,and color is
blue. When it is stop, the color is grey.
NETWORK TECHNOLOGY
3.Choose the car and click right mouse, then you can send the SMS to the device on the pla orm
4.Click here can check the reports
NETWORK TECHNOLOGY
How to add Vehicle
1. Choose the “vehicle and group management”
2. Choose “add vehicle”
NETWORK TECHNOLOGY
3. Fill the required
Attention:
KS168，KS668，KS106，KS168M:
Use the ASC protocol type, the terminal ID is 0+11 digital IMEI. When set the number
and send SMS “number+11 digital IMEI”, these two 11 digital IMEI must keep the same
KS658 need to fulfill the full 15 digital IMEI
NETWORK TECHNOLOGY
How to add a Secondary User
1. Choose the “user management”
2. Press the right bu on of mouse under the user manager, choose “User Manager”
NETWORK TECHNOLOGY
3. Fill the User and Password, and then save, the user has been added
4. Choose the “vehicle and group management”
NETWORK TECHNOLOGY
5. Press the right bu on of mouse under the group management, choose “add group”
6. Fill the group name and save.
Suggest give the group name as the same as the user name above, that’s will be easy for
management.
NETWORK TECHNOLOGY
7. Refreshing the web page and go to “user management” page.
Select the User “Test-1” and the Group “Test-1”, then gives the rights which you want to give to
the user, and saved
This opera on is to combine the User and Group; you must pitch on the User and Group.
A er opera on success, you have added a new account for your customer!
NETWORK TECHNOLOGY
How to set the Geo-fence
1. Select a car and choose the “Set Geo-fence” from here
2. Choose the“Square”or “round”icon to set the Geo-fence, you can change the size and place
of the Geo-fence
NETWORK TECHNOLOGY
3. Choose this icon to save the Geo-fence se ngs
NETWORK TECHNOLOGY
How to see the Track Replay
1. Select the car, then choose the “Track Replay”
2. Choose the me range that need to track
NETWORK TECHNOLOGY
3. When the download is finish and the “Intraday” is not zero, then the history trace come out
4. You can press the play bu on, and then the trace will be play
NETWORK TECHNOLOGY
How to send the “Take photo” commend on
the pla orm
1. Select a car and choose the “Take photo”
2. Choose the photo pixels
NETWORK TECHNOLOGY
3. Choose “OK”
4. Choose the “Latest Photos”
NETWORK TECHNOLOGY
5. Choose the “user management”