Download Manual - Digital Alert Systems
Transcript
Digital Alert Systems • AMS Installation /Operation & Integration Guide AMC Configure > Sources The AMS interfaces with a number of different data sources (see STEP 3 – Data Source Configuration below). Some sources communicate to watch folders in the AMC, while others rely on external watch folders. The Sources tab provides configuration adjustment for external watch folders. The AMC establishes a File Transfer Protocol (FTP) link with the external folder and then periodically checks the designated files in the folder for changes. If the file contents have changed the AMC will then process the new information. (Presently this is only available for setting NewsTicker values. Future versions are intended to support other interfaces) Initially or, if no external watch folder sources are configured the display starts as shown in Figure 14. Figure 14 AMS Source configuration initial screen Clicking + Add Source will open additional window for editing/modifying the links to the external watch folders. 1. In the Type field the pull-down selects an available interface type automatically filling the other fields with standard presets. 2. The Name field is used to create a unique designation for the interface and will appear in a list in the left most columns. 3. Just right of Attention is the audio file name set IP Address - the network reachable IP address of the watch folder. b. Username - the watch folder ‘s login name c. Password - the watch folder’s login password d. Source Directory - the watch folder’s file path, where source XML files are stored/updated. Be sure the pathname is complete including any “/” characters. a. 4. File Names – The AMC is able to monitor multiple files in a watch folder. Simply list all monitored filenames separated by a space. e.g. “breaking.xml” or “breaking.xml closings.xml” 5. To accept any changes to this menu click the Save button. Sources may be enabled or disabled using the check box alongside the name in the leftmost column. In this way an operator can control access or the specific files/folders the AMC will monitor for source data. Revision 1.1 Page 13 of 30