Download "user manual"
Transcript
n mark This warning mark appears if a problem exists with materials in the [Scene] list or [Option] menu. For details, see “ (page 109). Icon Displays in Lists” Sub Screen You can perform adjustments, configure settings, and enter text in the sub screen. Tapping each tab displays its respective operation screen. 1 2 3 4 5 6 7 Basic Operations a [Audio Mixer] screen Allows you to perform audio adjustments and mixing. The [Audio Mixer] screen appears immediately after the unit starts up. For details, see “Step 5: Audio Mixing” (page 31). b Tabs that appear according to the selections and status of the main screen [Input] tab Appears when the input source selected in the [Input] list of the main screen includes audio. Allows you to enable or disable the embedded audio. Tip When compositing video using PinP or chroma keying, the [Input] tab will only appear when an input source from the [Input [1]] list is selected. Embedded audio cannot be used for input sources in the [Input [2]] and [Input [3]] lists. For details, see “Adjusting the Embedded Audio of Input Sources” (page 76). [Camera] tab Appears when a remote camera is assigned to the input source selected in the [Input] list of the main screen. Allows you to perform manual controls for the remote camera, and configurations and adjustments for the tracking function. For details, see “Controlling Remote Cameras” (page 47). [Title] tab Appears when the [Title 1] or [Title 2] list is displayed in the main screen. Allows you to adjust the title appearance. For details, see “To adjust the appearance of composites” (page 45) in the “Viewing Title Composites” section. [Effect] tab Appears when the [Effect] list is displayed in the main screen. Allows you to adjust the size and position of the overlay video and the appearance of chroma key composites. Using the Screens 37