Download Elation 15rPro

Platinum Spot
•
15R Pro™
Before the Platinum Spot 15R Pro™ is put into operation be sure all covers have
been replaced, otherwise you risk damage to the retina and expose to UV radiation!
•
When replacing an old lamp, always be sure to replace with an approved
replacement. In this case a Philips MSD Platinum 15R lamp is required. Be sure the
replacement lamp meets or exceeds the original lamp specifications, failure to do so
may damage the fixture and void the manufactures warranty.
•
Be sure to follow all the lamp handling procedures included with the new lamp.
Never handle the new lamp with your bare hands as the oils from your skin may
damage the lamp and cause premature lamp failure.
Installation Procedure:
1. Set the fixture on a flat surface and remove the three screws marked “A”, “B”and “C”.
2. Remove the cover plate to access the lamp.
3. Slip out the lamp to the direction of painting on lamp cover. please see the picture
above with hand. (Please use the rag in lamp package to cover the lamp, when
accessing to the lamp, do not touch the lamp directly) .
4. Insert the new lamp securely. The lamp will only seat one way, please be sure to
©Elation Professional, Los Angeles, Ca
14
www.ElationLighting.com