Download CMA34CR Hardware Manual - RTD Embedded Technologies, Inc.

CMA34CR cpuModules™ User’s Manual
RTD Document Number: BDM-610000083 Revision H
Copyright © 2009-2014 RTD Embedded Technologies, Inc. All rights reserved.
Trademarks
Advanced Analog I/O, Advanced Digital I/O, aAIO, aDIO, a2DIO, Autonomous SmartCal, “Catch the Express”,
cpuModule, dspFramework, dspModule, expressMate, ExpressPlatform, HiDANplus, “MIL Value for COTS prices”,
multiPort, PlatformBus, and PC/104EZ are trademarks, and “Accessing the Analog World”, dataModule, IDAN, HiDAN,
RTD, and the RTD logo are registered trademarks of RTD Embedded Technologies, Inc (formerly Real Time Devices,
Inc.). PS/2 is a trademark of International Business Machines Inc. PCI, PCI Express, and PCIe are trademarks of PCI-SIG.
PC/104, PC/104-Plus, PCI-104, PCIe/104, PCI/104-Express and 104 are trademarks of the PC/104 Embedded
Consortium. All other trademarks appearing in this document are the property of their respective owners.
Failure to follow the instructions found in this manual may result in damage to the product described in this manual,
or other components of the system. The procedure set forth in this manual shall only be performed by persons qualified
to service electronic equipment. Contents and specifications within this manual are given without warranty, and are
subject to change without notice. RTD Embedded Technologies, Inc. shall not be liable for errors or omissions in this
manual, or for any loss, damage, or injury in connection with the use of this manual.
Revision History
ii
Revision
Date
Reason for Change
PRELIM
8/1/2014
Preliminary release
A
10/8/2014
Intial release. Added test results and made corrections throughout
B
10/23/2014
Updated Operating Temperature table with Quad Core temperature ranges.
C
11/19/2014
Removed unused sections, updated IDAN pinouts and back panel picture
D
12/17/2014
Updated temperature ratings, increased Serial UART from 64 to 512
E
1/14/2015
Updated Dual RS-422 Mode Table 24.
F
2/5/2015
Corrected “Disable Bus-Stack Error” Jumper setting
G
2/13/2015
Changed the ref designator for Fan Power connector, updated Sandra version, udpated table 23.,
Added dimensioned IDAN drawing.
H
3/16/2015
Updated Dual RS232 mode pinout table, added a note to the PCIe connector
CMA34CR cpuModule
BDM-610000083
Rev H